qi-hardware/ben-wpan
1
0
Fork 0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-11-25 18:57:11 +02:00
Code

prod/doc/setup.hmac: filled the intro sections; added dfu-util installation

Browse Source
This commit is contained in:
Werner Almesberger 2011-05-27 17:14:15 -03:00
parent 6ac10ddf18
commit 717f7e77a3
1 changed files with 43 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

49
prod/doc/setup.hmac
View File

@ -26,9 +26,10 @@
<SECTION ref="intro" title="Introduction">
Before performing any production tests, various pieces of software
need to be installed on Ben and PC, and configuration settings
@@@
Before performing production tests, various pieces of software
need to be installed on Ben and PC, and configuration settings may
have to be adjusted. The following sections describe the installation
and configuration process.
<!-- ====================================================================== -->
@ -36,7 +37,15 @@ need to be installed on Ben and PC, and configuration settings
<SECTION ref="pcsw" title="PC software installation">
@@@
For a DUT and reference device role, the <B>ben-wpan</B> utilities
and the test scripts have to be installed on the PC. For flashing the
<B>atusb</B> application
firmware, also <B>dfu-util</B> and the firmware binary are required.
<P>
The instructions below assume that a complete development environment
is already present on the PC. If any prerequisitres are not met,
compilation will fail, and you'll have to install the corresponding
package and try again.
<!-- ---------------------------------------------------------------------- -->
@ -79,6 +88,29 @@ repository, as shown above.
<!-- ---------------------------------------------------------------------- -->
<SUBSECTION title="Install dfu-util">
<B>dfu-util</B> is used to transfer the application firmware to
<B>atusb</B> boards. To build <B>dfu-util</B> from source, run these
commands:
<PRE>
git clone git://git.openezx.org/dfu-util.git
cd dfu-util
./autogen.sh
./configure
make
make install
</PRE>
Note that some Linux distributions already provide a pre-compiled
version of <B>dfu-util</B>, which could be used instead of building
it from source.
<!-- ---------------------------------------------------------------------- -->
<SUBSECTION title="Install firmware binary">
The binary of the application running on <B>atusb</B> is transferred from
@ -132,7 +164,13 @@ echo 192.168.1.202 jlime >>/etc/hosts
<SECTION ref="bensw" title="Ben software installation">
@@@
For a DUT and reference device role, the <B>ben-wpan</B> utilities
have to be installed on a Ben. For flashing the <B>atusb</B> boot
loader, also <B>avrdude</B> and the boot loader binary are needed.
<P>
The instructions below apply for OpenWrt and Jlime. For building
things from source, a cross-compilation toolchain has to be installed
on the PC.
<!-- ---------------------------------------------------------------------- -->
@ -208,7 +246,6 @@ Instructions for building <B>avrdude</B> from sources are
">here</A>.
<!-- ---------------------------------------------------------------------- -->