qi-hardware/ben-wpan
1
0
Fork 0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-12-31 22:58:59 +02:00
Code
1,042 Commits 4 Branches 3 Tags 3 MiB
37a4f00e41
Commit Graph

1042 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Werner Almesberger
37a4f00e41 atusb/fw/flash.c (flash_ops): fix placement of "const" 2015-05-29 09:43:02 -03:00
Werner Almesberger
9e9f65992c Merge branch 'master' of projects.qi-hardware.com:ben-wpan 2015-05-22 04:52:35 -03:00
Stefan Schmidt
a0e3ad301e web: Correct fw path for atusb release and make rsync verbose 2015-05-22 09:48:52 +02:00
Stefan Schmidt
d2a0bfa176 web: Add first atusb firmware release to website. 
I decided to actually keep the file directly in the repo. Its small enough
and we have the rest of the website here already.
 2015-05-21 15:41:41 +02:00
Stefan Schmidt
c6a87b488e web: Update links to linux-wpan project, driver and general status 
We are in a way better state now than two years ago. :)
 2015-05-21 15:41:41 +02:00
Stefan Schmidt
809a0935d8 atusb/fw: Bump minor version to mark first public release. 
With version 0.2 we made the first public release in binary form of the
firmware. This comes together with the merge of the ATUSB driver to the
mainline linux kernel.
 2015-05-21 14:58:05 +02:00
Stefan Schmidt
3ebd17f9e6 atusb/fw: Add build system support for adding a DFU suffix to the fw file 
DFU files need to have a valid DFU suffix which provides information about the
USB vendor and product ID it should be used for as well as same basic CRC file
integrity checking. The dfu-suffix tool can add this and got added to dfu-utils
in 0.7.

With the Makefile changes we take the original atusb-bin file, make a copy and
add the DFU suffix it before flashing.
 2015-05-21 14:58:05 +02:00
Stefan Schmidt
fc7551e532 atusb/fw: Use RX_AACK_ON instead of RX_ON in the firmware. 
This allows to run the device in ARET networks as we handle the needed
automated ACK in hardware.
 2015-05-20 15:02:19 +02:00
Stefan Schmidt
464ab40e39 Revert "atusb/fw/usb/: enable MCU reset on USB bus reset after config selection" 
This reverts commit 9b2696b848.

With this patch ATUSB resets constantly when I use it in QEMU with USB
poassthrough.
 2015-05-19 16:27:49 +02:00
Werner Almesberger
f89ce523e8 atusb/fw/usb/usb.c (handle_setup): skip non-interface descriptors when processing SET_INTERFACE 2015-04-25 23:54:02 -03:00
Werner Almesberger
428390047f fw/atusb/ (dfu_flash_ops): make const 2015-04-21 08:11:50 -03:00
Werner Almesberger
4b6f390830 atusb/fw/usb/usb.c (handle_setup): also pass interface-level GET_DESCRIPTOR to get_descriptor 2015-04-12 04:16:23 -03:00
Werner Almesberger
f7e684bbde atusb/fw/usb/usb.h: add endpoint types 2015-04-12 04:15:04 -03:00
Werner Almesberger
a6c639bbb3 atusb/fw/usb/usb.h: add a few common class codes 2015-04-11 14:53:52 -03:00
Werner Almesberger
88e2bde7d6 atusb/fw/usb/: fix incorrect code point for USB_CLASS_PER_INTERFACE 
The code of USB_CLASS_PER_INTERFACE is 0 and not 0xfe.
USB_CLASS_APP_SPEC is 0xfe. Also corrected the use in dfu.c
 2015-04-11 14:49:41 -03:00
Werner Almesberger
b51d442c31 atusb/fw/usb/dfu.c (config_descriptor): correct alt settings off-by-one error 2014-10-23 02:06:55 -03:00
Werner Almesberger
f1e689eaa6 atusb/fw/: support alternative interface names with DFU 2014-03-25 20:54:09 -03:00
Werner Almesberger
8f2f13c30a atusb/fw/: DFU: support multiple sets of flash operations; support multiple alt settings 2014-03-24 17:18:02 -03:00
Werner Almesberger
8b0859486e atusb/fw/usb/: change a few more uses of ../board.h to board.h 2014-02-24 17:59:49 -03:00
Werner Almesberger
71ad8dae76 makefiles/Makefile.kicad (GERBERS): auto-choose between old and new file names 
Recent versions of KiCAD use names like F_Cu.gtl, B_Mask.gbs, etc., while
older versions used Front.gtl, Mask_Back.gbs
 2013-11-29 09:18:33 -03:00
Werner Almesberger
a80ba86476 atusb/fw/usb/usb.h: define PID types (LS/FS) 2013-11-17 02:37:28 -03:00
Werner Almesberger
c5f9cc1259 atusb/fw/: let include path find board.h instead of using ../board.h 2013-10-28 11:17:48 -03:00
Werner Almesberger
4690466a53 tools/lib/atusb-common.c (atusb_interrupt_wait): fix embarrassing build failure 2013-09-28 14:44:00 -03:00
Werner Almesberger
bf067b3e73 atusb/fw/mac.c (RX_BUFS): increase buffer size from 2 to 3 frames 2013-07-30 20:38:13 -03:00
Werner Almesberger
08f4ac98fa Merge branch 'buffer-frames' 2013-07-30 20:37:12 -03:00
Werner Almesberger
873f80cb4d tools/atrf-txrx/atrf-txrx.c: option -q becomes "quick" and uses aggressive polling 
This allows us to capture frames at full speed speed.
 2013-07-30 20:16:02 -03:00
Werner Almesberger
07b1da29ec tools/lib/: aggressive polling for wait_for_interrupt, if timeout_ms = -1 2013-07-30 20:16:02 -03:00
Werner Almesberger
7fd9044d94 atusb/fw/: add SPI block reception 
This decreases the retrieval time for a frame of 102 bytes from
660 us to 384 us, corresponding to a speed change from about
1.26 Mbps to 2.17 Mbps (102 bytes plus 2 bytes overhead).
 2013-07-30 19:52:54 -03:00
Werner Almesberger
d1b65cb058 tools/atrf-txrx/atrf-txrx.c: new option -q for quiet capture 2013-07-30 13:48:55 -03:00
Werner Almesberger
0706773e38 atusb/fw/Makefile: improve size reporting (show segment sizes) 2013-07-24 17:19:55 -03:00
Werner Almesberger
a9d502850a atusb/fw/Makefile: improve size reporting (show segment sizes) 2013-07-24 17:18:33 -03:00
Werner Almesberger
998ac7e5c6 atusb/fw/mac.c (next_buf): dedicated function for incrementing buffer indices 2013-07-24 16:21:38 -03:00
Werner Almesberger
b73d5fc1af atusb/fw/mac.c: remove queued_rx; buffer frames in the MCU instead 
queued_rx held a frame in the transceiver's receive buffer until we could
transfer it. This may cause frame loss if a new reception begins.

We now retrieve frames from the transceiver immediately and buffer them
in the MCU.
 2013-07-24 07:57:35 -03:00
Werner Almesberger
6416fa8d0b atusb/fw/mac.c: add section titles 2013-07-23 12:50:42 -03:00
Werner Almesberger
172208e451 tools/atrf-txrx/atrf-txrx.c: use -x also on reception, to output message in hex 2013-06-23 02:03:26 -03:00
Werner Almesberger
a523e8d645 tools/atrf-txrx/atrf-txrx.c: new option -x to interpret messages as hex strings 2013-06-23 01:58:38 -03:00
Werner Almesberger
bb6acf15bc tools/atrf-txrx/atrf-txrx.c (usage): separate all sections by blank line 
The "PER" and "constant wave" sections followed their predecessors
without a blank line.
 2013-06-23 01:29:56 -03:00
Werner Almesberger
570982cc48 web/index.html: update Web page (including shop change from Tuxbrain to Pulster) 
- remove Tuxbrain shop
- add Pulster shop
- update kernel code location (now on github)
- add links to factory file packages
- clarify atusb code sizes
 2013-05-07 21:25:24 -03:00
Werner Almesberger
54630e0697 atben/misc/mkpatches: script to generate mails for the ATBEN kernel patches 2013-04-29 21:12:55 -03:00
Werner Almesberger
ec6c09dd9d atben-spi-performance.txt: clean up and describe role of referenced code 2013-04-29 20:05:54 -03:00
Werner Almesberger
ff9c7a8ce4 atben/misc/atben-spi-performance.txt: SPI performance comparison 
This was earlier posted to the mailing lists. Updated the URLs.
 2013-04-29 19:55:25 -03:00
Werner Almesberger
367c1abb0e atusb/fw/: echo back TX ACK sequence number; don't panic if driver times out TX 2013-04-01 22:04:05 -03:00
Werner Almesberger
9b2696b848 atusb/fw/usb/: enable MCU reset on USB bus reset after config selection 
This way the host can reset the MCU if it's hung (for example, in the
panic loop) and we don't need to unplug-replug.
 2013-04-01 15:54:44 -03:00
Werner Almesberger
65722d417a atusb/fw/mac.c: queue frame reception if USB is busy 
This way we we make sure we retrieve the frame and thus release dynamic
buffer protection (if enabled).
 2013-04-01 15:17:37 -03:00
Werner Almesberger
ad70d7c129 include/atusb/atusb.h: salvage cute explanation of 0x1540 from usb-ids.h 2013-04-01 14:43:36 -03:00
Werner Almesberger
dab0d183a2 atusb/fw/include/atusb/usb-ids.h: remove (and adapt former users) 2013-04-01 14:40:14 -03:00
Werner Almesberger
d76bdf6a82 atusb/fw/mac.c (handle_irq): move frame reception to separate function 2013-04-01 14:29:57 -03:00
Werner Almesberger
60ee82ba93 atusb/fw/mac.c (handle_irq): only handle TRX_END; never fall back to seq ints 2013-04-01 12:48:30 -03:00
Werner Almesberger
3e749c3140 fw/include/atusb/ep0.h: protect also USB_DIR_IN and USB_DIR_OUT 
They're currently not defined by libusb, but since the kernel has them,
they may eventually also end up in user space.
 2013-04-01 11:23:48 -03:00
Werner Almesberger
16dd767857 fw/include/atusb/ep0.h (USB_TYPE_VENDOR): avoid conflict with /usr/include/usb.h 2013-04-01 05:59:18 -03:00