1
0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-11-27 07:29:43 +02:00
Commit Graph

734 Commits

Author SHA1 Message Date
Werner Almesberger
f73f0a9481 Added Molex 0480371000 USB A plug (SMT)
- AUTHORS, components/INFO, components/usb_a_plug.lib,
  components/usb_a_plug.dcm: added symbol for USB A plug
- AUTHORS, modules/INFO, modules/usb_a_plug_smt.fpd: added footprint for
  USB A plug
- BOOKSHELF: added Molex 0480371000 USB A plug for SMT
- AUTHORS: corrected type in file extension of modules/xtal-4.fpd (was .fpg)
2010-10-25 03:07:03 -03:00
Werner Almesberger
e3c85074c8 modules/Makefile (MODULES): belatedly remove "pads" and "stdpass". Oops. 2010-10-25 03:07:02 -03:00
Werner Almesberger
01a9f2ce2c Added BOM data for "atusb" sub-project.
- bom/atrf.chr, bom/dk/digi-key.equ: added crystal and inductors for atusb
- bom/atrf.equ: is C8051F326 C8051F326-GM
- bom/atrf.inv, bom/atrf.sub: added printed component PAD_2mm
- bom/atrf.sub: tentatively added translation for crystals (X*)
- bom/atrf.sub: hack to turn rare 0.82 pF capacitors into more common 0.8 pF
- bom/Makefile (all, vpath, spotless): added atusb
- bom/Makefile (spotless): also remove cntr.par and cntr.ord
2010-10-25 01:00:11 -03:00
Werner Almesberger
a0f0781a96 atusb/atrf.sch (X1): don't explicitly say that the tolerance is a maximum 2010-10-25 00:53:35 -03:00
Werner Almesberger
9d6906d7d8 Cleanup of values in atusb/*.sch
- atusb/atrf.sch (C6, C7): use canonical name 820fF instead of 0.82pF
- atusb/usb.sch (VR1, VR2, VR3): changed value from 5V6 to 5V5 for
  compatibility with selected part
- atusb/atusb.sch: commit noise
- atusb/atusb.brd: reloaded for value changes
2010-10-25 00:26:27 -03:00
Werner Almesberger
b493f09363 Great renaming: atrf/wpan-atrf* becomes atusb/atusb*
- atrf/: rename to atusb/
- atrf/wpan-atrf.pro, atrf/wpan-atrf.sch, atrf/wpan-atrf.brd,
  atrf/wpan-atrf.cmp: rename to atusb.*
- atrf/Makefile: change ben-wpan to atusb
- atrf/atusb.pro (LastNetListRead): update for name change
- tools/Makefile.common (CFLAGS): change fw/ include location from atrf/
  to atusb/
2010-10-25 00:10:00 -03:00
Werner Almesberger
57874cf5e2 Revert TVS size reduction. We're not ready for it yet.
- cntr/cntr.sch (VR1, VR2, VR3): reverted change to 0402, because this
  would be too difficult to route with current board
- cntr/cntr.sch (VR1, VR2, VR3): change voltage from 5.6 V to 5.5 V,
  for compatibility with selected part
- cntr/cntr.brd: updated for value change
2010-10-24 23:55:37 -03:00
Werner Almesberger
a2e91cf13e Take "pads" and "stdpass" modules from kicad-libs and remove local copy.
- atrf/wpan-atrf.pro, atusd/atusd.pro, cntr/cntr.pro: use "pads" footprint
  from kicad-libs
- atrf/wpan-atrf.pro, cntr/cntr.pro: use "stdpass" footprint from
  kicad-libs
- AUTHORS, modules/INFO, modules/pads.fpd, modules/stdpass.fpd: removed
  pads.fpd and stdpass.fpd
2010-10-24 23:52:23 -03:00
Werner Almesberger
69ddbf6f0c Added BOM data for "cntr" sub-project.
- bom/atrf.chr: tentative characteristics of two transient voltage
  suppressors
- bom/Makefile (CHR): added atrf.chr
- bom/atrf.sub: added tentative translation for TVSs
- bom/atrf.equ: added C8051F320 and mini-USB receptacle (for cntr)
- bom/atrf.inv: added 120x60 mil pad (for cntr)
- bom/atrf.sub: map footprint to value for PAD_12x60
- bom/Makefile: marked .par files as "precious"
- bom/Makefile (all, vpath): added cntr sub-project
- bom/dk/digi-key.equ: added cntr parts: C8051F320-GQ, LTST-C190KRKT,
  TVSs CT0603M4G and EZJ-P0V080GA, USB receptacle 1734035-2
2010-10-24 23:52:23 -03:00
Werner Almesberger
6e0abca154 bom/Makefile generalization
- bom/Makefile: simplify atusd.ord and atusd.par rule by using $^
- bom/Makefile: use pattern rule for atusd.ord and atusd.par
- bom/Makefile: since we can't have more than one percent sign on a
  dependency, add vpath
- bom/Makefile: use pattern rule for show-atusd. We also have to remove
  show-atusd from .PHONY because implicit rules are not applied to phony
  targets.
2010-10-24 23:51:50 -03:00
Werner Almesberger
2e742d9281 Assorted termination simulation cleanup.
- term/Makefile: "make qucs" shortcut for invoking qucs
- term/term.sch: disable switch to .dpl page after simulation
- term/term.sch: changed R3 from 50 Ohm to the more common 47 Ohm
- term/term.sch: changed C2 from 22 pF to 330 pF to match TVS
- term/term.sch: renamed Vin to Vdst and put graph in diagram on top
- term/term.sch: added more annotations
2010-10-24 20:15:11 -03:00
Werner Almesberger
021bb00e96 Cleaned up component values in cntr schematics.
- cntr/cntr.sch: LED part number is LTST-C190KRKT, not LTST-C190KTKR
- cntr/cntr.sch: changed Vdc of VR4 from 5.6 V to 5.5 V (to match EPCOS
  CT0603M4G
- cntr/cntr.sch: changed VR1 through VR3 to 0402 for lower capacitance
2010-10-24 19:43:53 -03:00
Werner Almesberger
41765416db cntr/term/term.sch: simulation of impedance-matched termination circuit 2010-10-24 13:07:24 -03:00
Werner Almesberger
6668a6de02 Added (partially incorrect, see INFO) footprint of F MMCX board edge connector
- AUTHORS, modules/INFO, modules/mmcx-f-edge.fpd: MMCX female SMT board
  edge connector (not entirely correct, due to limitations of fped)
- BOOKSHELF: added Molex 73415-0961 data sheet
2010-10-24 01:42:53 -03:00
Werner Almesberger
850e9fca29 More rm -rf to rm -f changes.
- bom/Makefile (atusd.ord, atusd.par): rm -r in case of failure is enough
  (reported by Wolfgang Spraul)
2010-10-23 08:39:51 -03:00
Werner Almesberger
2dec6466c4 Use prettyord -t plus a tiny bit of shell to do what SHOW_PRETTY did.
- bom/Makefile (SHOW_PRETTY): open-coded what little remained of this macro
- bom/Makefile (show-atusd): use prettyord -t to simplify the formatting
2010-10-17 20:37:42 -03:00
Werner Almesberger
265ba07ab2 eda-tools now has all the R and C we need here. Removed local database.
- bom/Makefile: access database in eda-tools/boom/
- dk/digi-key.equ: removed resistors and capacitors
- bom/Makefile, bom/avx.gen, bom/johanson.gen, bom/murata.gen,
  bom/panasonic.gen, bom/stackpole.chr, bom/tdk.gen, bom/yageo.gen: remove
  databases already present in eda-tools
2010-10-17 20:23:52 -03:00
Werner Almesberger
bcbd6d8370 Merge branch 'master' of projects.qi-hardware.com:ben-wpan 2010-10-03 21:57:57 -03:00
Werner Almesberger
b1f1b48bac Moved dsv to eda-tools.
- scripts/dsv: moved to eda-tools/dsv/dsv
- Makefile: changed path to dsv's new location
2010-10-03 21:56:22 -03:00
kristianpaul
76322b9f4c Added filled case version 2010-10-02 22:12:22 -05:00
kristianpaul
be87d645e6 New case design blue collored ~4 mm high 2010-09-28 22:04:18 -05:00
kristianpaul
058c417219 Updated instruccions about how to get the gerber in Heekscad also niw Case is now full green 2010-09-25 13:50:09 -05:00
kristianpaul
9b99628aff Merge branch 'master' of projects.qi-hardware.com:ben-wpan 2010-09-25 13:29:44 -05:00
kristianpaul
5810f2bf21 Added 6mm tall case 2010-09-25 13:28:50 -05:00
Werner Almesberger
fe7d55dc8b Small improvements to spectrum walk script.
- usrp/step: the default number of runs (10) can now be overridden on the
  command line
- usrp/step: usrp2_rx_cfile.py likes to busy loop from time to time. Add
  a CPU time limit to prevent this from getting out of hand.
2010-09-25 15:13:21 -03:00
kristianpaul
6af7641ed8 Added first alpha design files for atusd case 2010-09-25 13:04:55 -05:00
Werner Almesberger
e89fc6ab4c Added the Johanson 2450FB15L0001 balun as a less expensive alternative to the
Wuerth 748421245.

- BOOKSHELF (balun3): added data sheet for Johanson 2450FB15L0001
- bom/atrf.equ: Johanson 2450FB15L0001 and 2450FB15L0001E (Digi-Key use)
  are equivalent
2010-09-22 12:33:02 -03:00
Werner Almesberger
dce0a19794 Measurement results and a script to view them.
- usrp/plot: convenience script to plot the signal strength scans
- usrp/step-A, usrp/step-I, usrp/step-II: signal strength scans for three
  boards
2010-09-16 14:45:09 -03:00
Werner Almesberger
e445fe1b01 usrp/: a set of utilities for testing board performance with an USRP2
- usrp/d.c: reduce the number of data points in a file produced by
  usrp2_rx_cfile.py and print them as text suitable for gnuplot
- usrp/p.c: determine the peak amplitude in a series of transmissions,
  filtering noise and artefacts at the beginning of the data file
- usrp/step: step through all channels and measure TX power (for antenna
  tuning)
- usrp/Makefile: built "p" and "d"
2010-09-16 01:01:02 -03:00
Werner Almesberger
c99ba2c769 atspi-txrx can now send repeatedly, cleans up on ^C, prints the power level.
if it differs by more than 0.01 dBm from the level specified
- tools/atspi-txrx/Makefile (LDLIBS): added -lm, for fabs()
- tools/atspi-txrx/atspi-txrx.c (transmit, usage, main): add optional
  command-line argument with the number of times to send the message
- tools/atspi-txrx/atspi-txrx.c (receive, transmit, die, main): return and
  clean up on ^C
- tools/tools/lib/misctxrx.c (wait_for_interrupt) return and raise SIGINT
  for the caller's signal handler on ^C
2010-09-14 17:12:03 -03:00
Werner Almesberger
b390b28364 atusd/ERRATA: started errata section for 100912. Nothing major so far. 2010-09-14 13:44:16 -03:00
Werner Almesberger
6b5d239bf5 Added more resistor choices to BOM processor.
- bom/Makefile, bom/stackpole.chr: added Stackpole 0R 0402 resistor
- bom/Makefile, bom/panasonic.gen: added Panasonic 5% resistors
2010-09-12 18:46:43 -03:00
Werner Almesberger
499df0ea40 Added generation of Yageo RC0402 resistors. We can now produce the full BOM.
- bom/lib/e12.inc: added _E12_1 translation
- bom/yageo.gen: added RC0402 resistor series
2010-09-12 17:01:54 -03:00
Werner Almesberger
f2824f1d35 Moved all capacitor tolerance and _E12_P translations to shared includes.
- bom/lib/captol.inc: translation of all capacitor tolerance values
- bom/lib/e12.inc: translation of E12 values (for pico-based scale for now)
- bom/avx.gen, bom/johanson.gen, bom/murata.gen, bom/tdk.gen, bom/yageo.gen:
  include libraries instead of copying the same tables
2010-09-12 16:47:08 -03:00
Werner Almesberger
636011c23d Adjusted parsing of component values. Now all capacitors get properly selected.
- bom/atrf.sub: adjusted setting of capacitance and inductivity to
  conventions used in these projects
2010-09-12 16:43:33 -03:00
Werner Almesberger
66e5aa5a90 Rename bom/yageo-cap.* to bom/yageo.* to keep things simple.
- bom/yageo-cap.gen: renamed to bom/yageo.gen
- bom/Makefile: changed all occurrences of yageo-cap to "yageo"
2010-09-12 15:47:56 -03:00
Werner Almesberger
c0052faa25 BOM work in progress. Completed generation of capacitor characteristics.
- bom/Makefile (INV): added project-local inventory
- bom/Makefile (CHR): auto-populate from $(GEN)
- bom/Makefile: added generation of characteristics for Johanson and Murata
  parts
- bom/Makefile (dk/digi-key.dsc): need this target to generate digi-key.dsc
- bom/Makefile (spotless): remove generated .chr files based on $(GEN)
- bom/atrf.equ, bom/dk/digi-key.equ: added the less expensive Johanson
  2450FB15L0001 as alternative for the Wuerth 748421245
- bom/dk/digi-key.equ: added more capacitors, including specific RF caps
- bom/atrf.inv: renamed test-point from PAD_60x60 to TST
- bom/avx.gen, bom/johanson.gen, bom/tdk.gen, bom/yageo-cap.gen: corrected
  the part number parsers and added more product families
2010-09-12 15:19:38 -03:00
Werner Almesberger
843a0bcb18 atusd/cam/pcb.pl: updated for new board shape 2010-09-12 12:43:52 -03:00
Werner Almesberger
f8ae351347 Moved cam/ to atrf/cam/ 2010-09-12 12:37:40 -03:00
Werner Almesberger
b3374dd7c8 Added antenna tuning "tail" suggested by Joerg. Made board slimmer.
- modules/meander.fpd, atusd/atusd.brd: added tuning "tail" to antenna
  (suggested by Joerg Reisenweber)
- atusd/atusd.brd: pulled back somewhat protruding CLKM test point
- atusd/atusd.brd: made external board 20 mil narrower
- atusd/atusd.brd: version number is now 20100912
- atusd/atusd.pro: KiCad commit noise
2010-09-12 12:25:57 -03:00
Werner Almesberger
5d28e1b182 Corrected small footprint errors. Made 0R "inductor" a resistor.
- atusd/atusd.sch, atusd/atusd.cmp, atusd/atusd.brd: made L1 a resistor
- atusd/atusd.sch, atusd/atusd.cmp, atusd/atusd.brd: changed effective
  footprints of components erroneously using 0805 to 0805-M
- atusd/atusd.pro: commit noise
2010-09-12 00:27:10 -03:00
Werner Almesberger
1a5d9f5a1e bom/: automatic BOM generation (work in progress)
- bom/Makefile: run and control the BOM generation system
- bom/atrf.equ: project-specific equivalences
- bom/atrf.inv: "inventory" of parts implemented as PCB features
- bom/atrf.sub: substitution rules
- bom/avx.gen, bom/johanson.gen, bom/tdk.gen, bom/yageo-cap.gen: part number
  translators for capacitors
2010-09-12 00:17:18 -03:00
Werner Almesberger
6fc656fd7f Added Digi-Key catalog data for automated BOM processing.
- bom/dk/Makefile, bom/dk/dk-db.pl: Digi-Key catalog query environment from
  gta02-core
- bom/dk/digi-key.equ: manufacturer-distributor equivalences for some parts
  used in atusd and atusb
2010-09-11 17:12:05 -03:00
Werner Almesberger
f17613bc69 Applied clock voltage divider fix and corrected too closely spaced via.
- atusd/atusd.sch, atusd/atusd.cmp, atusd/atusd.brd: changed resistive
  clock voltage divider to capacitative
- atusd/atusd.brd: moved via near pin 1 and rearranged ground planes
  accordingly
- atusd/atusd.sch, atusd/atusd.brd: bumped version number to 20100911
- atusd/atusd.pro: KiCad commit noise
2010-09-11 17:08:25 -03:00
Werner Almesberger
876a5ca8c5 Removed DTC123JE transistor files. (Was used only in 20100903 design.)
- AUTHORS, atusd/atusd.pro, atusd/dtc123.lib: removed DTC123 schematics
  symbol
- AUTHORS, atusd/Makefile, atusd/atusd.pro, atusd/dtc123.fpd: removed
  DTC123 footprint
2010-09-11 15:57:34 -03:00
Werner Almesberger
4c81175da3 atusd/tests/psd*: first transmit power spectral density measurement 2010-09-11 15:24:59 -03:00
Werner Almesberger
d14e55bea2 Updated to do list. 2010-09-10 16:18:20 -03:00
Werner Almesberger
df071c3398 New ECN about clock circuit of atusd boards. Measured (absence of) effect of
adding an inductor to the clock line.

- ecn/INDEX, ecn/ecn0005.txt: new ECN discussing the switch to a
  capacitative clock voltage divider. With frequency measurements.
- atusd/tests/send-20100910: measurement of transceiver performance when
  placing an inductor in the 16 MHz clock line.
2010-09-10 00:06:33 -03:00
Werner Almesberger
d3bc274dab Moved the ECNs from atrf/ecn to the top-level. 2010-09-09 20:56:58 -03:00
Werner Almesberger
b32827dc7e Oops. The atusb boards are of course 20100813. 20100902 was the first
(failed) attempt to make an atusd board.
2010-09-09 20:43:45 -03:00