Werner Almesberger 3cc92cc4a6 atusb/fw/: define USB bus current (40 mA) in board.h based on measured value ... The measured values are: board idle, looping 9 mA LED on + 5 mA TX CW (+3 dBm) +14 mA ------ 28 mA ====== Adding a margin of 12 mA, we get 40 mA. DFU used 30 mA so far, the application 50 mA. - board.h (BOARD_MAX_mA): define maximum USB bus current - descr.c (config_descriptor), usb/dfu.c (config_descriptor): use BOARD_MAX_mA for bMaxPower instead of hard-coding values		2011-06-10 19:33:24 -03:00
..
atu2.c	atusb/fw/: SET_INTERFACE can now select among interfaces (changes user_setup)	2011-06-10 17:12:57 -03:00
dfu.c	atusb/fw/: define USB bus current (40 mA) in board.h based on measured value	2011-06-10 19:33:24 -03:00
dfu.h	atusb/fw: introduced function flash_end_write to properly finish flashing	2011-03-11 17:56:41 -03:00
usb.c	atusb/fw/: SET_INTERFACE can now select among interfaces (changes user_setup)	2011-06-10 17:12:57 -03:00
usb.h	atusb/fw/: SET_INTERFACE can now select among interfaces (changes user_setup)	2011-06-10 17:12:57 -03:00