mirror of
git://projects.qi-hardware.com/ben-wpan.git
synced 2024-11-30 05:16:16 +02:00
126 lines
3.4 KiB
HTML
126 lines
3.4 KiB
HTML
<TITLE>Production and testing</TITLE>
|
|
<BODY>
|
|
<HTML>
|
|
<H1>Production and testing</H1>
|
|
|
|
This document gives a high-level description of the production test process
|
|
for <B>atben</B> and <B>atusb</B> boards, plus - in the case of <B>atusb</B>
|
|
the production steps required between the boards leaving the SMT line and the
|
|
actual testing.
|
|
<P>
|
|
The testing serves two purposes:
|
|
<OL>
|
|
<LI>Ascertain the correctness of the preceding production steps, and
|
|
<LI>identify suffering from random production flaws and either discard
|
|
them or prepare them for repair.
|
|
</OL>
|
|
The results of testing and fault analysis also provide feedback for the
|
|
SMT process and steps preceding it.
|
|
<P>
|
|
The following diagram illustrates the workflow:
|
|
<P>
|
|
<IMG src="flow.png">
|
|
<P>
|
|
Only <B>atusb</B> boards contain firmware and need flashing (which is
|
|
a two-step process, see below). The functional tests and further fault
|
|
analysis are largely the same for <B>atben</B> and <B>atusb</B>.
|
|
<P>
|
|
Devices accepted for further use can then be packaged for shipping.
|
|
Defective devices can be discarded or retained for a deeper analysis.
|
|
|
|
|
|
<H2>Terminology</H2>
|
|
|
|
<DL>
|
|
<DT>Ben</DT>
|
|
<DD>a device capable of hosting the <B>atben</B> and <B>atusb-pgm</B>
|
|
boards. In the production process, a Ben can perform three different
|
|
roles:
|
|
<OL>
|
|
<LI> Host an <B>atben</B> board acting as DUT
|
|
<LI> Host an <B>atben</B> board acting as reference
|
|
<LI> Host an <B>atusb-pgm</B> used for flashing the boot loader
|
|
</OL>
|
|
In this document, we assume that a single Ben is used in all
|
|
three roles, with the board in its 8:10 card slot changed as
|
|
the role requires.
|
|
<DT>PC</DT>
|
|
<DD>a device capable of connecting to a Ben via USB, and of hosting an
|
|
<B>atusb</B> board. In the production process, a PC can perform three
|
|
different roles:
|
|
<OL>
|
|
<LI> Host an <B>atusb</B> board acting as DUT
|
|
<LI> Host an <B>atusb</B> board acting as reference
|
|
<LI> Control a Ben via USB (for convenience)
|
|
</OL>
|
|
In this document, we assume that a single PC is used in all
|
|
three roles, with one USB host port permanently connecting to the
|
|
Ben, and a second USB host port populated with <B>atusb</B> boards
|
|
as needed.
|
|
<DT>DUT</DT>
|
|
<DD>Device Under Test. An <B>atben</B> or <B>atusb</B> board that
|
|
has left SMT, and is being prepared for testing or in the process
|
|
of being tested.
|
|
<DT>Reference</DT>
|
|
<DD>An <B>atben</B> or <B>atusb</B> device that is known to work and
|
|
and that acts as a peer for RF communication with the DUT.
|
|
<DT>SMT</DT>
|
|
<DD>In this context, the actual process of soldering components to
|
|
the unpopulated PCB, and all related tasks providing an input to
|
|
this process. Such related tasks include the configuration of the
|
|
SMT line, and testing and conditioning of the components to solder.
|
|
</DL>
|
|
|
|
|
|
<H2>Setup</H2>
|
|
|
|
<H3>PC software installation</H3>
|
|
<H3>Ben software installation</H3>
|
|
<H3>Ben software setup</H3>
|
|
<H3>Test profiles</H3>
|
|
|
|
|
|
<H2>Flashing (atusb only)<H2>
|
|
|
|
<H3>Flashing the boot loader</H3>
|
|
|
|
<P>
|
|
<IMG src="setup-C.png">
|
|
<P>
|
|
|
|
|
|
<H3>Flashing the application</H3>
|
|
|
|
<P>
|
|
<IMG src="setup-D.png">
|
|
<P>
|
|
|
|
|
|
<H2>Functional test</H2>
|
|
|
|
<H3>Test setup for atben</H3>
|
|
|
|
<P>
|
|
<IMG src="setup-A.png">
|
|
<P>
|
|
|
|
<H3>Test setup for atusb</H3>
|
|
|
|
<P>
|
|
<IMG src="setup-B.png">
|
|
<P>
|
|
|
|
<H3>Test procedure</H3>
|
|
|
|
<H2>Fault analysis</H2>
|
|
|
|
<H3>Component orientation</H3>
|
|
<H3>Clock frequency</H3>
|
|
|
|
<P>
|
|
<HR>
|
|
Last update: 2011-05-17 <I>Werner Almesberger</I>
|
|
<HR>
|
|
</BODY>
|
|
</HTML>
|