mirror of
git://projects.qi-hardware.com/ben-wpan.git
synced 2024-12-24 18:38:59 +02:00
259400fdb8
- ./: basic framework to build a firmware that can enumerate - usb/patches/: patches to make FreakUSB 0.7 compile cleanly and to make it work in our context
122 lines
3.3 KiB
Diff
122 lines
3.3 KiB
Diff
Index: fw4/hw/at90usbxx2/at90usb.h
|
|
===================================================================
|
|
--- fw4.orig/hw/at90usbxx2/at90usb.h 2011-02-08 15:58:49.000000000 -0300
|
|
+++ fw4/hw/at90usbxx2/at90usb.h 2011-02-08 15:59:22.000000000 -0300
|
|
@@ -42,14 +42,6 @@
|
|
|
|
#define AT90USB16
|
|
|
|
-#define VBUS_SENSE_DDR DDRB
|
|
-#define VBUS_SENSE_PORT PORTB
|
|
-#define VBUS_SENSE_PIN PINB
|
|
-#define VBUS_SENSE_IO 5
|
|
-
|
|
-// test if vbus is present
|
|
-#define is_vbus_on() ((VBUS_SENSE_PIN & (1<<VBUS_SENSE_IO)) != 0)
|
|
-
|
|
// banks
|
|
#define SINGLE 0
|
|
#define DUAL 1
|
|
Index: fw4/hw/at90usbxx2/hw.c
|
|
===================================================================
|
|
--- fw4.orig/hw/at90usbxx2/hw.c 2011-02-08 15:57:56.000000000 -0300
|
|
+++ fw4/hw/at90usbxx2/hw.c 2011-02-08 16:00:31.000000000 -0300
|
|
@@ -85,26 +85,14 @@
|
|
// set the interrupts: vbus, suspend, and end of reset
|
|
UDIEN |= (_BV(SUSPE) | _BV(EORSTE));
|
|
|
|
- // enable vbus sense pin
|
|
- VBUS_SENSE_DDR &= ~_BV(VBUS_SENSE_IO);
|
|
- VBUS_SENSE_PORT &= ~_BV(VBUS_SENSE_IO);
|
|
-
|
|
- // enable the vbus sense interrupt
|
|
- PCICR |= _BV(PCIE0);
|
|
- PCMSK0 |= _BV(PCINT5);
|
|
-
|
|
- // do an initial check to see if bus power is available. we
|
|
- // need this because we'll miss the first transition to vbus on
|
|
- if (is_vbus_on())
|
|
- {
|
|
- pcb->connected = true;
|
|
+ /* we're bus-powered, so VBUS is on by definition */
|
|
+ pcb->connected = true;
|
|
|
|
- // attach USB
|
|
- UDCON &= ~_BV(DETACH);
|
|
+ // attach USB
|
|
+ UDCON &= ~_BV(DETACH);
|
|
|
|
- // reset CPU
|
|
- //UDCON |= _BV(RSTCPU);
|
|
- }
|
|
+ // reset CPU
|
|
+ //UDCON |= _BV(RSTCPU);
|
|
|
|
// turn on the global interrupts
|
|
sei();
|
|
Index: fw4/hw/at90usbxx2/isr.c
|
|
===================================================================
|
|
--- fw4.orig/hw/at90usbxx2/isr.c 2011-02-08 16:00:34.000000000 -0300
|
|
+++ fw4/hw/at90usbxx2/isr.c 2011-02-08 16:00:56.000000000 -0300
|
|
@@ -249,60 +249,3 @@
|
|
|
|
sei();
|
|
}
|
|
-
|
|
-/**************************************************************************/
|
|
-/*!
|
|
- This ISR is only for the AT90USB16 since we need to use an IO as the VBUS sense
|
|
-*/
|
|
-/**************************************************************************/
|
|
-ISR(PCINT0_vect)
|
|
-{
|
|
- usb_pcb_t *pcb = usb_pcb_get();
|
|
-
|
|
- cli();
|
|
-
|
|
- if (is_vbus_on())
|
|
- {
|
|
- pcb->connected = true;
|
|
-
|
|
- // enable the 3.3V regulator for the USB pads
|
|
- REGCR &= ~_BV(REGDIS);
|
|
-
|
|
- // freeze the clock
|
|
- USBCON |= _BV(FRZCLK);
|
|
-
|
|
- // enable the 48 MHz PLL
|
|
- PLLCSR &= ~(_BV(PLLP2) | _BV(PLLP1) | _BV(PLLP0));
|
|
- PLLCSR |= _BV(1<<PLLE);
|
|
-
|
|
- // busy wait until the PLL is locked
|
|
- while (!(PLLCSR & _BV(PLOCK)));
|
|
-
|
|
- // unfreeze clock
|
|
- USBCON &= ~_BV(FRZCLK);
|
|
-
|
|
- // attach USB
|
|
- UDCON &= ~_BV(DETACH);
|
|
-
|
|
- // reset CPU
|
|
- UDCON |= _BV(RSTCPU);
|
|
- }
|
|
- else
|
|
- {
|
|
- // if we're connected, but VBUS is gone, then detach
|
|
-
|
|
- // detach from the bus
|
|
- UDCON |= _BV(DETACH);
|
|
-
|
|
- // freeze the clock and turn off the USB PLL
|
|
- USBCON |= _BV(FRZCLK);
|
|
- PLLCSR &= ~_BV(PLLE);
|
|
-
|
|
- // disable the USB voltage regulator
|
|
- REGCR |= _BV(REGDIS);
|
|
-
|
|
- pcb->connected = false;
|
|
- pcb->flags = 0;
|
|
- }
|
|
- sei();
|
|
-}
|