qi-hardware/board-qi-avt2
1
0
Fork 0
mirror of git://projects.qi-hardware.com/board-qi-avt2.git synced 2024-12-24 05:18:58 +02:00
Code

Commit Graph

  • f55892a269 Fixing the mask layer on annular rings master Carlos Camargo 2010-02-02 08:28:01 -0500
  • 1b3b94d0d5 Increase Zone's clearance to .15mm, reduce Mask clearance to .1mm Carlos Camargo 2010-02-02 07:13:31 -0500
  • 8053e4cea4 replace the old email address of Adam Xiangfu Liu 2010-01-28 23:00:49 +0800
  • 731eb6b683 Fix some DRC errors on key pads. Carlos Camargo 2010-01-28 08:50:22 -0500
  • 74cd40332e same as last commited contents Adam Wang 2010-01-22 20:36:26 +0800
  • 05135c1216 1, renamed power-tree J1 to J2. 2, changed C26 from Copper layer to Component layer. 3, changed text of "http://sharism.cc/" to "http://nanonote.cc/" 4, generated *.lst to list every part as bom for confiming automatic insertion (AI) attibute. 5, edited and checked each part's attibutes as Normal+Insert for AI need. 6, generated *-Component.pos & *-Copper.pos for AI. 7, generated *-drc.rpt, gerber files & drill file again Adam Wang 2010-01-22 20:12:01 +0800
  • 798c53f747 Change board and CC_BY_SA logo to silkscreen layer Carlos Camargo 2010-01-14 01:03:53 -0500
  • 9855f9c991 Adding CC and COL_LOGO files Carlos Camargo 2010-01-12 14:13:43 -0500
  • 167c49bbff Adding emQbit/UNAL text, Board logo and CC-BY-SA logo Carlos Camargo 2010-01-12 13:53:51 -0500
  • 542365a774 1, generated PCBnew DRC file Adam Wang 2010-01-11 17:10:46 +0800
  • 2e73936118 1, Set the coordinates origin for the photo plot and drill file 2, generated gerber files and drill file 3, renamed text 20100107 to 20100111 Adam Wang 2010-01-11 16:55:27 +0800
  • c3a9386ef1 1. renamed U12 to KB3436 in function_block 2. added MT48LC32M16A2P-75:C in sch 3. renamed 32MB to 64MB in function_block 4. added "http://sharism.cc/""RXD/TXD/GND""+""-" in Silks_Cmp layer Adam Wang 2010-01-07 17:49:03 +0800
  • 0b9dfcc8a6 Fix the errors on: http://wiki.qi-hardware.com/wiki/Layout_notes_avt2_RC2_20091230 Carlos Camargo 2010-01-02 16:40:09 -0500
  • cf491c1b7f Added touch test points (4-pin connector). Juan Brinez 2009-12-10 19:20:04 -0500
  • f14678be23 Serial connector: 8P->3P. Juan Brinez 2009-12-09 11:13:48 -0500
  • 7208b1b1da Changes: see the <layout_note_revised2.txt> file. Juan Brinez 2009-11-30 22:09:30 -0500
  • f8d1531cfb Changes: see the <layout_note_revised2.txt> file. Juan Brinez 2009-11-30 09:55:39 -0500
  • a71ccea08b See the <layout_note_revised2.txt> file. Juan Brinez 2009-11-30 09:28:06 -0500
  • 5a7f9b6bd4 Adding SW1 (small). Juan Brinez 2009-11-05 09:32:16 -0500
  • 20a12e015f Changing Serial Connector. Juan Brinez 2009-11-04 10:15:44 -0500
  • 3cce1b9bbd kb3436 for usb host. Juan Brinez 2009-10-29 14:41:24 -0500
  • de7c5fe160 Changin: EMI filter, KEYIN8 and RXD Pull-up. Juan Brinez 2009-10-14 13:29:29 -0500
  • 438cf94a63 Updating Inner_L1 gerber. Complete conecctions board pcb. Juan Brinez 2009-10-10 13:15:31 -0500
  • e6a9eb4834 Updating Inner_L1 gerber. Complete conecctions board pcb. Juan Brinez 2009-10-10 12:09:00 -0500
  • 909eac8a67 Added: Fill zones (copper pour), USB-DF IC. Juan Brinez 2009-10-09 18:28:14 -0500
  • 225b6f3a28 Deleted unnecessary files. Juan Brinez 2009-10-04 01:39:43 -0500
  • 6b3e9b9ab5 Deleted unnecessary files. Juan Brinez 2009-10-04 01:37:24 -0500
  • 3f2894fab6 Added copper pour, Connect: 581, Unconnect: 80. (86.63%) Juan Brinez 2009-10-04 01:28:53 -0500
  • 3bd3609881 Fixing power labels and connections on hierarchical sheets. Juan Brinez 2009-10-03 16:43:22 -0500
  • d9cc30be6a Deleted unecessary files. Juan Brinez 2009-09-27 12:26:34 -0500
  • 5ed273530f Merge branch 'master' of git@projects.qi-hardware.com:board-qi-avt2 Juan Brinez 2009-09-25 07:43:21 -0500
  • 87caf3ea13 Fix ERC errors on sch file: V18, V33, V33SD, VBAT, VBAT0, VDDHP, VRTC, U3, SW1. Fix components: USB_MICRO_AB, Q5, NPN, CON1, U7, U5, D2. Juan Brinez 2009-09-25 07:35:57 -0500
  • 4f3a7faae6 Fix some path errors on Qi_AVT2.brd Qi_AVT2.sch CON_BAT.mod CON_MEM.mod Carlos Camargo 2009-09-24 21:50:57 -0500
  • cda6aef8aa Fix ERC errors on sch file: V18, V33, V33SD, VBAT, VBAT0, VDDHP, VRTC, U3, SW1. Fix footprint errors on USB_MICRO_AB, Q5, NPN, CON1, U7, U5, D2. Carlos Camargo 2009-09-24 21:42:17 -0500
  • 0de2ecedff Fixim problems: USB library. Juan Brinez 2009-09-22 23:57:24 -0500
  • 69aff87972 Edited sdcw2012 (L3 & L5) library, swap pin 1~2~4. Juan Brinez 2009-09-19 13:55:42 -0500
  • bec3325b38 Edited crystal library, swap pin 1~2. Juan Brinez 2009-09-19 13:43:14 -0500
  • 0f450c5af7 Fixing someting Erc errors, view the Qi_AVT2.erc file. Juan Brinez 2009-09-15 13:59:29 -0500
  • d59a67cd57 Fixing someting Erc errors, view the Qi_AVT2.erc file. Juan Brinez 2009-09-15 13:57:02 -0500
  • 1dace079fc Fixing someting Erc errors, view the Qi_AVT2.erc file. Juan Brinez 2009-09-14 22:57:42 -0500
  • 9696407baf Route SD CARD lines carlos 2009-09-14 22:08:51 -0500
  • 197878d063 Fixing J3 footprint Juan Brinez 2009-09-14 20:40:31 -0500
  • 14661f74af Routing ... carlos 2009-09-14 20:37:02 -0500
  • 2e80b02c4a Inital route, SDRAM, NAND, LCD carlos 2009-09-14 18:13:36 -0500
  • a951b8c64f Start routing. NAND, SDRAM memories, LCD carlos 2009-09-14 17:31:13 -0500
  • 65c246ef98 Edited TPM58 (keys) and TPSR15 (reset) footprints. Juan Brinez 2009-09-13 20:18:21 -0500
  • 893608943a Resized sheet, changed the relative coordinates origin and rebuilded the board conectivity. Juan Brinez 2009-09-13 14:27:26 -0500
  • c79740797e Edited pcb, removed extra footprints, reorganized silks texts and more. Carlos Camargo 2009-09-13 10:11:12 -0500
  • d65b8da7fd New library component. Boot Switch and holes. juan64bits 2009-09-13 09:55:49 -0500
  • 2ca7bcbf32 Remove unnecessary Test Points, Adding usb switch connections in .brd file carlos 2009-09-12 22:21:09 -0500
  • 0fdac0d262 Remove unnecessary Test Points, Adding usb switch connections carlos 2009-09-12 22:16:53 -0500
  • e060183dc4 Resize and move silkscreen text carlos 2009-09-11 19:41:56 -0500
  • 43b50c5799 Reduce and move some silsckreen text, carlos 2009-09-11 19:39:35 -0500
  • f9dc0a01bc initial import carlos 2009-09-04 21:51:48 -0500
  • f3a4240b84 2009/08/31 adam 1, <sch> add SW1 to configure boot selection from NAND or USB 2, <sch> change U6 pin definition pin1 = GND, pin2= OUT 3, <bom> delete R9 to be NC 4, <bom> add SW1 ESP40XX Adam Wang 2009-09-01 00:05:41 +0800
  • 452130063a minor gitignore fix Adam Wang 2009-08-31 11:39:46 +0800
  • 014e1d7c08 1, Updated BOM / Schematic: a) Added D6/MSCD104 for raising efficiency b) Changed C57 to 0.1uF/16V, C49 to 1uF/16V, TP31 to CKE c) Added R46/10k/5%, d) Added TP85 for +5V USB host voltage measurement Adam Wang 2009-08-13 10:55:09 +0800
  • b9e9f30d3e 1, Add H/W version control via R48 & R49 to distinguish. 2, Add USB HOST circuits which including a) Micro-AB Receptacle, b) Use a P-Channel MOSFET to switch 5V to external device by ID signel Hi or Low detection c) Add LT3925EDCB to convert battery voltage to USB power need Adam Wang 2009-08-07 22:30:22 +0800
  • d820e00c28 New serial_con part Adam Wang 2009-08-01 13:53:57 +0800
  • 9649cdda43 Added serial con and updated bom Adam Wang 2009-08-01 13:46:35 +0800
  • 2baf38fe30 This power_tree.sch is the purpose for layout and quick view Adam Wang 2009-07-26 23:21:39 +0800
  • 2d4d667fcb Added power_tree.sch to easily realize that structure of power tree which marked reasonable currents go through traces on power labels Adam Wang 2009-07-26 23:04:55 +0800
  • 9e460ec1a7 For quick view, a function block schematic <main/function_block.sch> provided this version. Adam Wang 2009-07-25 00:52:36 +0800
  • f1e30f6f28 Due to add function_block schematic which roughly describes current system block of this version Adam Wang 2009-07-25 00:36:08 +0800
  • 76e568186a Change TM2301N to TM2301FN, TM2302N to TM2302FN Adam Wang 2009-07-07 09:42:06 +0800
  • 710e49d187 Remove VENDOR CONTACT Adam Wang 2009-07-03 21:47:46 +0800
  • b099a322ae Marked Power Label and Test Points Adam Wang 2009-07-03 18:01:18 +0800
  • c692d0c132 added main/*.bak files to gitignore Adam Wang 2009-07-03 17:33:58 +0800
  • 8a4ed2bcf9 added .gitignore Adam Wang 2009-07-03 17:30:36 +0800
  • 868613e587 initial commit Adam Wang 2009-07-03 17:20:21 +0800