Werner Almesberger
346899c34c
cameo/: new command "purge" to remove corners that add little or on area
...
Such corners are typically artefacts that can upset later processing stages.
2015-09-28 18:13:02 -03:00
Werner Almesberger
c7ff028cc9
cameo/: new command write_gerber, for Gerber output
2015-03-15 21:07:47 -03:00
Werner Almesberger
44d58a54fa
cameo/ops.c (tool_comp_paths): don't crash if path list is empty
2013-09-20 17:36:16 -03:00
Werner Almesberger
e69fa24133
cameo/: new commands "remove" and "keep" for path filtering (untested)
2012-06-12 12:32:08 -03:00
Werner Almesberger
c59e39356b
cameo: new command "reverse" to reverse all paths
...
Experimentally used to reverse tool direction in the smoothing pass.
2012-03-21 20:31:29 -03:00
Werner Almesberger
639b0fa2d6
cameo/: make tool_comp_paths output paths in the order processed
2011-09-05 07:54:29 -03:00
Werner Almesberger
a42a18fef3
cameo/: new gnuplot tag #%id= with generator-assigned identifier
...
Excellon and Gerber store the file name there.
2011-09-05 05:46:25 -03:00
Werner Almesberger
75c3a7d1d2
cameo/: added option "any" to "mill", to accept paths irrespective of tool size
2011-08-31 21:32:29 -03:00
Werner Almesberger
57b4e276e5
cameo: added optimization of movements between tool paths
...
- ops.h, ops.c (optimize_paths): reorder toolpaths to reduce the distance
between them
- lang.l, lang.y: added command "optimize"
- README: documented "optimize"
2010-12-16 14:19:46 -03:00
Werner Almesberger
ed6bbff7f8
cameo/ops.c (tool_comp_paths): inside/outside logic was reversed for outer path
2010-12-16 02:38:11 -03:00
Werner Almesberger
b1652fc50a
cameo: adding support for dril/mill substitutions (in progress)
...
- Makefile (OBJS): added shape.o
- README: added section for drill/mill substitutions
- lang.l, lang.y: added commands "drill", "empty", "mill", "remainder", and
"reset"
- lang.y (clear_paths): moved freeing of all paths from "clean" to shared
function clear_paths
- ops.h, ops.c (try_drill, try_mill): helper functions for "drill" and
"mill" commands
- shape.h. shape.c (slot, circle): functions to generate toolpaths for
basic shapes
2010-12-15 04:56:58 -03:00
Werner Almesberger
3ae3d6cdd3
cameo: cleaned up and documented the tool compensation
...
- README, lang.l, lang.y: renamed the "tool" command to "offset"
- README: documented "offset"
- ops.h, ops.c (tool_comp_paths), cameo.c (main), lang.y: added
parameter to tool_comp_paths to treat all paths as internal
- lang.l, lang.y: added option "inside" to the "offset" command
- lang.y: "offset" can now take multiple options in any order
2010-12-14 23:37:31 -03:00
Werner Almesberger
2bf4559f3f
cameo: moved tool compensation from cameo.c to ops.c
...
- Makefile (OBJS): added ops.o
- cameo.c, ops.h, ops.c (process_path, process_paths): moved from cameo.c
to ops.c
- ops.h, ops.c (process_paths), cameo.c (main): renamed process_paths to
tool_comp_paths
- ops.c (process_path, tool_comp_paths): renamed process_path to
tool_comp_1
2010-12-14 14:15:52 -03:00
