Werner Almesberger
f48754e067
cameo/path.c: make path_is_closed global
2012-06-12 14:24:50 -03:00
Werner Almesberger
382d14dcbb
cameo/path.c: move assert(path_is_closed) into function and improve diagnostic
...
It's often hard to find an offending path. To help with this, we
now print the start and end coordinates.
2012-06-12 14:01:55 -03:00
Werner Almesberger
e69fa24133
cameo/: new commands "remove" and "keep" for path filtering (untested)
2012-06-12 12:32:08 -03:00
Werner Almesberger
1c11f4d201
cameo/: use libpoly2d for area fills
2012-05-08 01:06:45 -03:00
Werner Almesberger
c2bfbd5a5e
cameo: add two test cases (exhibiting brokenness)
2012-05-01 23:48:32 -03:00
Werner Almesberger
fcb508f1ef
cameo/test/: move to cameo/test/1/
2012-05-01 23:28:49 -03:00
Werner Almesberger
8ce420b10b
cameo/excellon.c: recognize G90 code (absolute mode)
...
Recent KiCad emits this. We're in absolute mode anyway, so we simply
ignore it.
2012-04-01 19:26:46 -03:00
Werner Almesberger
479ae41070
cameo/README: added warning that "area" still has bugs
2012-03-29 18:44:14 -03:00
Werner Almesberger
c59e39356b
cameo: new command "reverse" to reverse all paths
...
Experimentally used to reverse tool direction in the smoothing pass.
2012-03-21 20:31:29 -03:00
Werner Almesberger
3e7fca45b3
cameo/fped2d2z.pl: outpout a dummy point at Z=0 (experimental)
...
This is signal for genpiece.pl to generate the top layer.
2012-03-21 01:02:43 -03:00
Werner Almesberger
6d70656ab2
cameo/path.c (path_offset): handle also degenerate polygons of only one point
...
To do: use a square, not a circle. Also, extend this to degenerate
polygons consisting of two points.
2012-03-21 01:00:12 -03:00
Werner Almesberger
079608ba6c
cameo/zstack.pl: don't output lower layers at higher Z
...
We leave this to the designer :-)
2012-03-20 23:13:35 -03:00
Werner Almesberger
340fb2cf8b
cameo: consider inside/outside also when checking corner points
2012-03-20 23:05:42 -03:00
Werner Almesberger
7a61482a04
cameo/area.c: move handling of left/right from hit_path to hit_segment
...
For future extensions.
2012-03-20 19:30:03 -03:00
Werner Almesberger
ebcdfd52ca
cameo/area.c (hit_segment): clean up entry/exit handling
2012-03-20 19:18:08 -03:00
Werner Almesberger
d79424d9ae
cameo/area.c: move equation solving from "intersect", for future sharing
2012-03-20 19:02:50 -03:00
Werner Almesberger
19bc92aa79
cameo/area.c (do_line): shorten segments to avoid duplicating outline cuts
...
We considered the outlines for dropping entire segments but not for
calculating their start and end points.
2012-03-19 19:46:40 -03:00
Werner Almesberger
4ea94e72dc
cameo/fped2d2z.pl: added Z position substitution
...
We need this to add overshoot for milling through a piece.
2012-03-19 15:59:24 -03:00
Werner Almesberger
9f5751aaa9
cameo/fped2d2z.pl: added option -r, like in zstack.pl
2012-03-19 15:29:57 -03:00
Werner Almesberger
ce243b6a79
cameo/zstack.pl (usage): describe option -r
...
Also show usage on unknown option.
2012-03-19 15:29:57 -03:00
Werner Almesberger
fb117b20e5
cameo/area.c (subordinates): fix trimming of list of subordinates
2012-03-19 01:02:19 -03:00
Werner Almesberger
18c9477137
cameo: "area" now works on Z layers individually (untested)
2012-03-19 00:26:41 -03:00
Werner Almesberger
5ecce7de9e
cameo/zstack.pl: option -r to reverse the stack
2012-03-18 23:20:27 -03:00
Werner Almesberger
219e0a5c2d
cameo/fped2d2z.pl: convert fped 2D stacks into 2.5D paths with Z information
2012-03-18 23:05:40 -03:00
Werner Almesberger
085754f931
cameo/zstack.pl: convert 2.5D paths into a stack with limited Z steps
2012-03-18 21:45:56 -03:00
Werner Almesberger
489ca9c24d
cameo: documented "area"; miscellaneous cleanup
...
Also removed the tool diameter argument. We use the diameter from the
path, like "offset" does. In the long run, this convention probably
doesn't make sense, though.
2012-03-18 21:00:08 -03:00
Werner Almesberger
6811df57b6
cameo/area.c: removed debugging and obsolete code
2012-03-18 20:25:16 -03:00
Werner Almesberger
6fbdfd7120
cameo/area.c (touch): also consider whether we're looking for entry/exit
2012-03-18 20:15:50 -03:00
Werner Almesberger
b607816f95
cameo/area (hit_segment): only consider vectors pointing in the right direction
...
This way we avoid false positives, such as exit points while looking
for an entry.
2012-03-18 19:47:02 -03:00
Werner Almesberger
5a599e14f6
cameo: don't duplicate paths already cleared by the outline
...
Also pass information on whether we're about to enter or leave a
polygon.
2012-03-18 17:57:04 -03:00
Werner Almesberger
35c0624dc5
cameo: "area" now also adds the outline cuts
...
"offset" wasn't suitable for alternating inside and outside anyway.
2012-03-18 17:02:43 -03:00
Werner Almesberger
8c4dfc55b6
cameo/test/: test scenario for area fill
2012-03-18 13:19:13 -03:00
Werner Almesberger
2530a11c80
cameo: an attempt at area fill (WIP)
2012-03-18 13:16:26 -03:00
Werner Almesberger
90254ef0bc
cameo: also connect paths from gnuplot files
...
We only did this for Gerber.
2011-12-16 04:36:17 -03:00
Werner Almesberger
639b0fa2d6
cameo/: make tool_comp_paths output paths in the order processed
2011-09-05 07:54:29 -03:00
Werner Almesberger
828763b747
cameo/path.c (path_replace): free the old ID
2011-09-05 06:20:12 -03:00
Werner Almesberger
a67d0b447e
cameo/shape.c: removed global "path" variable (where did that madness come from ?)
2011-09-05 05:49:23 -03:00
Werner Almesberger
a42a18fef3
cameo/: new gnuplot tag #%id= with generator-assigned identifier
...
Excellon and Gerber store the file name there.
2011-09-05 05:46:25 -03:00
Werner Almesberger
41bffa8f79
cameo/excellon.c: increased MAX_TOOL from 10 to 20
2011-09-01 12:03:32 -03:00
Werner Almesberger
98b0e961ae
mkmk-simple: exit with an error code if "gp2rml" fails
2011-09-01 12:02:37 -03:00
Werner Almesberger
5651a40230
mkmk-simple: new option CLEARANCE (default: 2mm)
2011-09-01 12:00:58 -03:00
Werner Almesberger
50918a26fd
mkmk-simple: changed path to gp2rml from ...openmoko... to ...qi/cae-tools...
2011-09-01 03:38:27 -03:00
Werner Almesberger
afa7460b45
mkmk-simple: added variable ANY (usage: ANY=any) to set "mill any"
2011-08-31 21:32:29 -03:00
Werner Almesberger
75c3a7d1d2
cameo/: added option "any" to "mill", to accept paths irrespective of tool size
2011-08-31 21:32:29 -03:00
Werner Almesberger
54101eaaf4
mkmk-simple: exit with an error code if "cameo" fails
2011-08-31 21:32:29 -03:00
Werner Almesberger
6795057567
cameo/templates/mkmk-simple: added optional BOARD_Z parameter for board thickness
2011-08-31 14:53:56 -03:00
Werner Almesberger
4ae218c6dc
mkmk-simple: oops, should be executable
2011-02-15 02:10:44 -03:00
Werner Almesberger
b0eb0178ee
cameo/templates/mkmk-simple: template for milling simple boards
2011-02-15 02:06:26 -03:00
Werner Almesberger
0826d5b35e
cameo: allow comma between parameters of "drill" (makes use in scripts easier)
...
- lang.y: allow an optional comma between the parameters of "drill"
- README: explain the new syntax of "drill"
2011-02-15 02:06:10 -03:00
Werner Almesberger
dfc53c781a
cameo: new command "stats" to print path statistics
...
- README: documented the "stats" command
- lang.l, lang.y: added "stats" command
- path.h (path_stats), path.c (path_stats): calculate and print path
statistics
2011-02-13 02:25:32 -03:00
