f32xbase/f32x/README

Targets: C8051F326/C8051F327
Programmer: OpenMoko GTA01/GTA02 with a debug v2 board

To do:
- support C8051F320/1 as well
- port to Ben NanoNote

Signal	DbgV3	Net		GPIO	V0: C2	V1: C2
------	-----	-------		----	------	------
CLK	3	SPI_CLK0	E13	C2CK	C2D
MOSI	4	SPI_MOSI0	E12	C2D	-
MISO	5	SPI_MISO0	E11	-	C2CK
nSS	6	SS0		G2	-	-


On the Ben, the kernel driver has to release the MMC port before it
can be used by f32x:

echo jz4740-mmc.0 >/sys/bus/platform/drivers/jz4740-mmc/unbind
f32x/ - firmware uploader for the C2 protocol. From IDBG. 2010-08-13 14:46:38 +03:00			`Targets: C8051F326/C8051F327`
			`Programmer: OpenMoko GTA01/GTA02 with a debug v2 board`

			`To do:`
			`- support C8051F320/1 as well`
			`- port to Ben NanoNote`

			`Signal DbgV3 Net GPIO V0: C2 V1: C2`
			`------ ----- ------- ---- ------ ------`
			`CLK 3 SPI_CLK0 E13 C2CK C2D`
			`MOSI 4 SPI_MOSI0 E12 C2D -`
			`MISO 5 SPI_MISO0 E11 - C2CK`
			`nSS 6 SS0 G2 - -`
Add DFU to BOOKSHELF. Add MMC driver unloading instructions to f32x/README - BOOKSHELF: added the DFU specification 1.1 as "dfu" - f32x/README: the kernel's MMC driver has to be unloaded before using the uSD interface for bit-banging 2010-11-06 03:00:13 +02:00

			`On the Ben, the kernel driver has to release the MMC port before it`
			`can be used by f32x:`

			`echo jz4740-mmc.0 >/sys/bus/platform/drivers/jz4740-mmc/unbind`