Cleaned up command-line parsing. Added option -n to disable target power.

- f32x/c2-ben.c: removed #include <stdio.h> left over from debugging
- f32x/f32x.c (main): command-line parsing now uses getopt() and is done
  before trying to talk to the target
- f32x/c2-drv.h (c2_ops), f32x/c2.h (c2_init), f32x/c2.c (c2_init),
  f32x/c2-om.c (om_init): pass "power" argument along the init call chain
- f32x/c2-ben.c (ben_init): added target power switching
- f32x/f32x.c (usage, main): new option -n to disable target power

f32x/c2-ben.c

@@ -9,7 +9,6 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-#include <stdio.h>
 
 
 #include "gpio-xburst.h"
@@ -24,10 +23,13 @@
 #include "c2-bitbang.c"
 
 
-static void ben_init(void)
+static void ben_init(int power)
 {
 	gpio_init();
+	if (power)
 		gpio_low(POWER_OFF);
+	else
+		gpio_high(POWER_OFF);
 	c2_init();
 	
 }

f32x/c2-drv.h

@@ -25,7 +25,7 @@
 
 
 struct c2_ops {
-	void (*init)(void);
+	void (*init)(int power);
 	void (*reset)(void);
 	void (*addr_write)(uint8_t addr);
 	uint8_t (*addr_read)(void);

f32x/c2-om.c

@@ -27,7 +27,7 @@
 #include "c2-bitbang.c"
 
 
-static void om_init(void)
+static void om_init(int power)
 {
 	gpio_init();
 	c2_init();

f32x/c2.c

@@ -50,13 +50,13 @@ uint32_t c2_data_read(int bytes)
 /* ----- C2 initialization ------------------------------------------------- */
 
 
-void c2_init(void)
+void c2_init(int power)
 {
 	extern struct c2_ops DRIVER;
 
 	c2_ops = &DRIVER;
 	if (c2_ops->init)
-		c2_ops->init();
+		c2_ops->init(power);
 }
 
 

f32x/c2.h

@@ -1,8 +1,8 @@
 /*
  * f32x/c2.h - Basic C2 messages
  *
- * Written 2008 by Werner Almesberger
+ * Written 2008, 2010 by Werner Almesberger
- * Copyright 2008 Werner Almesberger
+ * Copyright 2008, 2010 Werner Almesberger
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -23,7 +23,7 @@ uint8_t c2_addr_read(void);
 void c2_data_write(uint32_t data, int bytes);
 uint32_t c2_data_read(int bytes) ;
 
-void c2_init(void);
+void c2_init(int power);
 void c2_reset(void);
 
 #endif /* !C2_H */

f32x/f32x.c

@@ -1,8 +1,8 @@
 /*
  * f32x/f32x.c - Simple C8051F326/7 Flash programmer
  *
- * Written 2008, 2009 by Werner Almesberger
+ * Written 2008-2010 by Werner Almesberger
- * Copyright 2008, 2009 Werner Almesberger
+ * Copyright 2008-2010 Werner Almesberger
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,6 +14,7 @@
 #include <stdint.h>
 #include <stdlib.h>
 #include <stdio.h>
+#include <unistd.h>
 #include <string.h>
 #include <sys/types.h>
 
@@ -164,11 +165,11 @@ static void protect(void)
 static void usage(const char *name)
 {
 	fprintf(stderr,
-"usage: %s [-p] file\n"
+"usage: %s [-n] [-p] file\n"
-"       %s -d\n"
+"       %s [-n] -d\n"
-"       %s -e\n"
+"       %s [-n] -e\n"
-"       %s -b pin_setup\n"
+"       %s [-n] -b pin_setup\n"
-"       %s\n\n"
+"       %s [-n]\n\n"
 "  -b pin_setup\n"
 "    Perform a boundary scan. pin_setup sets all 14 pins in this order:\n"
 "    P0_0, P0_1, ..., P0_7, P2_0, ..., P2_5.\n"
@@ -177,7 +178,8 @@ static void usage(const char *name)
 "    order, with a dot between P0 and P2.\n"
 "  -d  dump Flash content\n"
 "  -e  erase whole Flash\n"
-"  -p  Protect the data after writing\n"
+"  -n  do not provide power to the target (default: do provide power)\n"
+"  -p  protect the data after writing\n"
 "Invocation without argument resets the F32x.\n"
   , name, name, name, name, name);
 	exit(1);
@@ -186,41 +188,91 @@ static void usage(const char *name)
 
 int main(int argc, char **argv)
 {
-	c2_init();
+	enum {
-	identify();
+		mode_default = 0,
+		mode_flash,
+		mode_dump,
+		mode_erase,
+		mode_scan,
+	} mode = mode_default;
+	int do_protect = 0, power = 1;
+	int c;
 
-	switch (argc) {
+	while ((c = getopt(argc, argv, "bdenp")) != EOF)
-	case 1:
+		switch (c) {
-		/* just reset */
+		case 'd':
-		break;
+			if (mode)
-	case 2:
-		if (!strcmp(argv[1], "-d"))
-			dump_flash(0x4000);
-		else if (!strcmp(argv[1], "-e"))
-			erase_flash();
-		else if (*argv[1] == '-')
 				usage(*argv);
-		else {
+			mode = mode_dump;
-			do_flash(argv[1]);
-			identify();
-		}
 			break;
-	case 3:
+		case 'e':
-		if (!strcmp(argv[1], "-p")) {
+			if (mode)
-			if (*argv[2] == '-')
 				usage(*argv);
-		    	do_flash(argv[2]);
+			mode = mode_erase;;
-		    	protect();
-		    	identify();
 			break;
-		}
+		case 'b':
-		if (strcmp(argv[1], "-b"))
+			if (mode)
 				usage(*argv);
-		boundary(argv[2]);
+			mode = mode_scan;;
+			break;
+		case 'n':
+			power = 0;
+			break;
+		case 'p':
+			do_protect = 1;
 			break;
 		default:
 			usage(*argv);
 		}
+
+	switch (mode) {
+	case mode_default:
+		switch (argc-optind) {
+		case 0:
+			break;
+		case 1:
+			mode = mode_flash;
+			break;
+		default:
+			usage(*argv);
+		}
+		break;
+	case mode_scan:
+		if (argc != optind+1)
+			usage(*argv);
+		break;
+	default:
+		if (argc != optind)
+			usage(*argv);
+		break;
+	}
+
+	c2_init(power);
+	identify();
+
+	switch (mode) {
+	case mode_default:
+		/* just reset */
+		break;
+	case mode_dump:
+		dump_flash(0x4000);
+		break;
+	case mode_erase:
+		erase_flash();
+		break;
+	case mode_flash:
+		do_flash(argv[optind]);
+		if (do_protect)
+			protect();
+		identify();
+		break;
+	case mode_scan:
+		boundary(argv[optind]);
+		break;
+	default:
+		abort();
+	}
+
 	c2_reset();
 
 	return 0;