Move platform-specific boot loader configuration into macros.

- fw/boot/boot.c (boot_loader): moved GTA-specific pull-up disable and
  I2C_SDA_PULL enable into macro PLATFORM_SETUP
- fw/boot/boot.c (run_payload): moved GTA-specific pull-up enable and
  I2C_SDA_PULL disable into macro PLATFORM_EXIT
- fw/boot/boot.c (boot_loader): moved GTA-specific I2C_SDA probe into macro
  PLATFORM_TEST
- fw/common/Makefile.common: removed all references to dependencies on
  .target. The caller is now responsible for these.
- fw/boot/dfu.c: don't include idbg/usb-ids.h; USB_VENDOR and USB_PRODUCT
  are now passed via macros

fw/boot/boot.c

@@ -27,22 +27,44 @@
 #include "dfu.h"
 
 
+/*
+ * GTA example:
+ *
+
+#define PLATFORM_SETUP		\
+	GPIOCN |= WEAKPUD;	\
+	I2C_SDA_PULL = 0;	\
+	delay();
+
+// Re-enable pull-ups
+// Don't waste power in pull-down
+#define	PLATFORM_EXIT		\
+	GPIOCN &= ~WEAKPUD;	\
+	I2C_SDA_PULL = 1;
+
+#define	PLATFORM_TEST		\
+	(!I2C_SDA || dfu.state != dfuIDLE)
+ */
+
+#ifndef PLATFORM_SETUP
+#define	PLATFORM_SETUP
+#endif
+
+#ifndef PLATFORM_EXIT
+#define	PLATFORM_EXIT
+#endif
+
+
 void run_payload(void)
 {
+	PLAYFORM_EXIT;
+
 	/* No interrupts while jumping between worlds */
 	EA = 0;
 
 	/* Restart USB */
 	USB0XCN = 0;
 
-	/* Re-enable pull-ups */
-	GPIOCN &= ~WEAKPUD;
-
-#ifdef GTA
-	/* Don't waste power in pull-down */
-	I2C_SDA_PULL = 1;
-#endif
-
 	debug("launching payload\n");
 
 	__asm
@@ -182,21 +204,17 @@ static void boot_loader(void)
 	 * the GTA01/02, once the system is powered up, IDBG exits this loop.
 	 */
 
-	GPIOCN |= WEAKPUD;
-#ifdef GTA
-	I2C_SDA_PULL = 0;
-#endif
-	delay();
+	BOOT_SETUP;
 
 	dfu_init();
 	usb_init();
 
-#ifdef GTA
+#ifdef PLATFORM_TEST
 
-	while (!I2C_SDA || dfu.state != dfuIDLE)
+	while (PLATFORM_TEST)
 		usb_poll();
 
-#else /* GTA */
+#else /* PLATFORM_TEST */
 
 #define	MS_TO_LOOPS(ms)	((uint32_t) (ms)*190)
 
@@ -211,7 +229,7 @@ static void boot_loader(void)
 				loop = 0;
 		}
 	}
-#endif /* !GTA */
+#endif /* !PLATFORM_TEST */
 }
 
 

fw/boot/dfu.c

@@ -31,7 +31,6 @@
 #include "uart.h"
 #include "usb.h"
 #include "dfu.h"
-#include "idbg/usb-ids.h"
 
 
 #ifndef NULL

fw/common/Makefile.common

@@ -13,8 +13,7 @@
 
 CC=sdcc
 CFLAGS=--std-c99 -I. -I../common \
-       -DPAYLOAD_START=$(PAYLOAD_START) -DPAYLOAD_SIZE=$(PAYLOAD_SIZE) \
-       -D`cat ../.target`
+       -DPAYLOAD_START=$(PAYLOAD_START) -DPAYLOAD_SIZE=$(PAYLOAD_SIZE)
 LDFLAGS=--xram-size 1024
 
 
@@ -68,8 +67,6 @@ $(MAIN).ihx:	$(OBJS:%=%.rel)
 .c.rel:
 		$(CC) $(CFLAGS) -c $<
 
-$(OBJS:%=%.rel): ../.target
-
 # below, set dummy UART speed to make dependencies build without error
 
 depend .depend:	
@@ -81,8 +78,6 @@ depend .depend:
 		      { rm -f .depend; exit 1; }; \
 		done
 
-.depend:	../.target
-
 ifeq (.depend,$(wildcard .depend))
 include .depend
 endif