Until now, everything used the bounding box of the root frame which
contains all the packages, visible or not. We now also record what
ends up in which package, allowing inst_get_bbox to return the
bounding box of a specific package.
This is mainly useful for scaling Postscript output where only one
package is printed per sheet and there is not much point in reserving
space for any other packages that may be generated from the same
footprint definition.
Before, they were silently ignored but still included in output.
This produced invalid Postscript (attempts to fit the pad name into
the zero-sized pad failed) and may also have produced artefacts
that could confuse KiCad.
If the package whose name is produced by the active variable values
is active and the variables change, then make the newly active
package the one whose name is produced by the changed variables.
This way, iterating through a table or a loop will automatically
switch to the right package, with the exception that, if the user
choses to explicitly select a different package (by clicking on
its name in the packages line), then that selection takes priority.
Explicit selection loses its priority when active package and active
variables coincide again. I.e., one can simply "catch" the active
package by activating the corresponding values.
Instances of measurements referencing vectors not instantiated were
only partially initialized (because only inst_meas_hint was called
on them but never inst_meas) but still left in the list of instances.
They were thus displayed, producing confusing results.
We now trace a measurement instance's validity and remove all invalid
instances at the end of instantiate_meas.
using frames to encapsulate building blocks, e.g., like macros or functions in
a programming language. Since measurements only know about the frame containing
a vector but not the frames containing that frame, invocations of this frame
from different places can only be distinguished within the min/next/max scheme.
(See the example in README.)
To eliminate this limitation, one needs a way to tell fped to consider a point
only if it has been instantiated through a certain path, e.g., by requiring
some other frames to be visited in its instantiation. This increases the number
of distinct points available for measurements.
The mechanism chosen is to qualify a measurement point with frames that lead to
it. This list of outer frames does not have to include all frames. Without
qualifying, the old behaviour results.
Note that this doesn't cover all possible ways in which a point can appear in
different roles. Multiple frame references can also result from repeating the
same frame reference in the same parent frame. The current qualification
mechanism does not allow such paths to be distinguished. However, one can
always introduce intermediate frames for this purpose.
Furthermore, repetitions create multiple instances of a point, although in what
should be considered the same role.
- fpd.l: make scanner support free-format a little better by switching back to
keyword mode after frame braces. This way, one can write a simple frame in a
single line, which is useful for regression tests.
- fpd.l, fpd.y, README, test/dbg_meas: added %meas directive to print the
result of a measurement
- fpd.y, README: measurements can now be labeled. Note that, due to limitations
of the grammar, the first measurement cannot be labeled.
- error.h, error.c (yywarn): new function for non-fatal diagnostics that always
get reported to standard error
- bitset.h, bitset.c: functions to manipulate variable-size bit sets
- meas.h, fpd.y, README, test/meas_qual: added the means to specify qualifiers
for points used in measurements
- dump.c (print_meas_base, print_meas): dump qualifiers
- delete.c (delete_references, test/del_frame): delete measurements that
reference a frame being deleted in their qualifiers
- obj.h, obj.c (enumerate_frames, instantiate): enumerate all frames so that we
have an index into the bit vector of visited frames
- meas.h, meas.c (reset_samples, meas_post), obj.c (generate_vecs,
generate_frame, instantiate): record the set of frames visited for each
sample
- meas.c (meas_post): only treat two instances of a point as equivalent if the
set of frames visited of one of them is a superset of set of the other. In
this case, keep the union of the two sets.
- meas.h, meas.c (meas_find_min, meas_find_next, meas_find_max),
test/meas_qual: instantiate_meas_pkg only select points for which all frames
in the qualification have been visited
- gui_meas.c (is_min, is_next, is_max, is_a_next): updated for above change
- inst.h, inst.c (curr_frame, propagate_bbox, add_inst, inst_begin_frame,
inst_end_frame, inst_start): renamed curr_frame to frame_instantiating to
avoid clash with curr_frame in fpd.y
- inst.h, inst.c (find_meas_hint): make global
- test/structure, test/del_vec, test/del_frame: fped now warns if a measurement
is in an unlinked frame. Changed regressions tests to avoid this warning.
- test/Common: new function expect_grep to compare only part of the output
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5967 99fdad57-331a-0410-800a-d7fa5415bdb3
- removed root_frame. "frames" now takes its place.
- removed frame->prev. In those few cases where we need the previous frame (for
deletion and dumping), we walk the list or recurse.
- the list of frames is now in GUI order, not file order.
- when reading the .fpd file, put the root frame first and leave it there.
- instead of walking the frames list and excluding the root frame by testing
frame->name, just start at frames->next
- likewise, instead of testing !frame->name just use frame == frames
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5948 99fdad57-331a-0410-800a-d7fa5415bdb3
- gui_style.c (gc_rim): slightly increased brightness when inactive
- kicad.c (kicad_pad): move coordinate transform to new function kicad_centric
- kicad.c: added pads with holes and mechanical holes
- inst.h (struct inst.u.hole), inst.c (inst_hole): added "layers" field, like
for pads
- layer.c (LAYER_COPPER, LAYER_PASTE, LAYER_MASK): renamed to LAYER_*_TOP and
added macros for corresponding bottom layers
- layer.c (refine_layers): mirror top layers of through-hole pads
- layer.h, layer.c (mech_hole_layers): return the layer set for mechanical
layers
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5941 99fdad57-331a-0410-800a-d7fa5415bdb3
infrastructure for hole objects. (Postscript and KiCad output are still
missing, and so does sanity checking.)
- gui_tool.c (new_obj_unconnected): set obj->name to NULL
- added hole objects to tool bar, all the various GUI routines, the .fpd
parser, and the .fpd dumper
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5939 99fdad57-331a-0410-800a-d7fa5415bdb3
were taken from the bounding box and thus included silk width and other
confusing things.
- inst.c (rect_status_sort): wrapper for rect_status that sorts the coordinates
(min/max)
- inst.c (line_op_select, rect_op_select, meas_op_select): display the
characteristics of the diagonal of the ideal line(s), not of the bounding box
- inst.c (pad_op_select, rpad_op_select): normalize the diagonal by using
rect_status_sort instead of rect_status. This makes pads behave like silk
screen objects.
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5924 99fdad57-331a-0410-800a-d7fa5415bdb3
of README.
- fpd.l, fpd.y, README: added debugging directives %del, %move, %print, %dump,
and %exit
- obj.h, fpd.y (find_obj, find_label, new_obj): objects can now be labeled
- obj.c (obj_anchors), inst.c (inst_anchors): gathering the list of anchors is
now a per-object function, not an instance "method". inst_anchors implements
the vector vs. object switch.
- inst.h, inst.c: removed all *_op_anchors functions
- expr.c (str_unit): in the past, we returned a malloc'ed string, but these
times are long gone. Thus, don't stralloc("").
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5919 99fdad57-331a-0410-800a-d7fa5415bdb3
safety, this only works if used directly, not through variables.)
- gui_status.c (edit_any_expr): replaced with dist_expr_store, which changes
values of "0" to "0mm"
- gui_status.c, gui_status.h (edit_dist_expr): new function to edit distance
expressions
- inst.c (obj_line_edit, obj_rect_edit, obj_arc_edit, obj_meas_edit): changed
edit_expr to edit_dist_expr
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5844 99fdad57-331a-0410-800a-d7fa5415bdb3
of the corresponding object but didn't change any table or loop selection to
make it active. (It did already change the frame reference.) This meant that,
upon clicking on an instance, often a different instance of the same object
would be selected. This was confusing at best.
With the below changes, table rows and loop iterations are adjusted such that
the instance that was clicked on becomes active. If the algorithm fails, fped
will print "__inst_select: tries exhausted" and fail safely. Please report if
this happens.
- obj.c (search_inst, find_inst, instantiate): added mechanism to search for
instances matching a previous instance
- obj.c (run_loops, iterate_tables): record matches in found_* elements of the
object's struct
- obj.c (reset_found, activate_found): helper functions to initialize and apply
the activation leading to the instance found
- inst.c (activate_item): added comment explaining how activate_item is
supposed to work and the fallacies of that logic
- inst.c (inst_select): added tries counter to avoid infinite recursion when
results don't converge
- inst.c (__inst_select): when selecting an instance in the same frame, adjust
tables and loops such that the instance becomes active
- inst.c: added call to find_inst after most instance creations (add_inst)
- obj.h: documented the meaning of the curr[ent]*, active*, and found* fields
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5792 99fdad57-331a-0410-800a-d7fa5415bdb3
- gui_status.h, gui_status.c (edit_*): edit functions now accept a tooltip
- added tooltips for editable status area items
- tooltips on setup_set_type_* looked strange. Show them only for the value
field next to the type field.
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5776 99fdad57-331a-0410-800a-d7fa5415bdb3
- gui_status.h: use macro to generate status_set_* delarations, just as we use
a macro for their definitions
- added tooltips for all non-editable fields in the status area
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5773 99fdad57-331a-0410-800a-d7fa5415bdb3
pointer position relative to the user origin in the radius/angle fields.
This helps to make quick manual measurements, e.g., of clearances.
This also fixes the following bug:
- gui_canvas.c (refresh_pos): showed canvas coordinates instead of model
coordinates
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5755 99fdad57-331a-0410-800a-d7fa5415bdb3
variable name" error was never cleared.
- inst.c (validate_pad_name): call status_begin_reporting before expanding the
string, to clear any previous error
- expr.c (expand): if the last character in the name is a dollar sign, print
"incomplete variable name" instead of "invalid character [...]"
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5731 99fdad57-331a-0410-800a-d7fa5415bdb3
but there's another problem in the dumping code that still spoils the fun.
- inst.c (do_move_to_vec): marking algorithm propagated an uninitialized value
- inst.c (do_move_to_vec): we have to clear the marks of vectors that are
before the vector being moved, because they will still be visited and
propagated
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5714 99fdad57-331a-0410-800a-d7fa5415bdb3
segfault, failure to update the screen content, and assigning of invalid
references.
- gui_tools.c: removed duplicate (harmless) line
- inst.c: when moving a vector to a new base, we may have to reorder the list
so that the assertion vectors always follow their bases is still maintained.
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5713 99fdad57-331a-0410-800a-d7fa5415bdb3
- changed pad classification in instances from bare/other to copper/special
- moved LAYER_* definitions from layer.h to layer.c
- after instantiation, we perform sanity checks on pads and remove layers from
coppery pads that are handled by a special layer
- fped.y: the line number in objects was never set
- overlap.c: fixed overlap calculations
- gui_tool.c: end_new_pad didn't initialize the pad type
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5635 99fdad57-331a-0410-800a-d7fa5415bdb3
make adjustments when removing layers provided by specialized pads
- gui_inst.c: moved gc construction from gui_draw_pad and gui_draw_rpad to
shared pad_gc
- layer.h: new home of all definitions related to pads and layers
- layer.c:
- overlap.c: functions to test for overlaps of pad shapes (in progress)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5634 99fdad57-331a-0410-800a-d7fa5415bdb3
- gui_status.c: the x entry are is now a vbox with variable content
- the pad type is now shown in the x entry area and can be changed by clicking
on it
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5633 99fdad57-331a-0410-800a-d7fa5415bdb3
solder mask pattern
- postscript.c: don't scale fonts down to nothing to make measurement text fit
(in progress)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5626 99fdad57-331a-0410-800a-d7fa5415bdb3
- vectors now have their own struct in inst.u and don't share inst.u.rect.end
- when selecting points for measurements, use the highlighting we've already
done and don't redo all the O(n^3) searching for each mouse pointer movement
- removed debug code that printed what new measurements are like. We can now
use the code view for that.
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5552 99fdad57-331a-0410-800a-d7fa5415bdb3
- .fpd file format: new directive "unit" to set the default unit
- new selection was too aggressive - make it only rearrange settings if we also
fail the second vector search
- gui_draw_pad_text: calculation of height vs. width lost too much precision,
causing pad text to be rotated arbitrarily
- drag_new_vec: display distance in mil if unit is mil
- end_new_raw_vec: store distance in mil if unit is mil
- gridify: use a 10 mil grid if unit is mil
- ps_hline: corrected gsave/grestore mismatch
- Makefile: made "all" a prerequisite of "install"
- Postscript output now mentions the default unit (if set)
- ps_package: height and width were swapped, oopsie !
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5525 99fdad57-331a-0410-800a-d7fa5415bdb3
- postscript.c: started adding generation of object-level frames (on-going)
- gui_canvas.c: moved call to inst_deselect into inst_select, so that
inst_select can keep track of the previous selection (if any)
- inst_select: if clicking on the location of the previous selection, try to
select the next matching item
- inst_select: if we can't find an active item, try to see if we can get
something by changing active references or - if all else fails - by
activating a different frame
- end_new_frame: reset the tool after placing the frame
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5522 99fdad57-331a-0410-800a-d7fa5415bdb3
length of the part of the diagonal that's on the pad. In the case of a
circle (BGA), this is just the diameter.
- changed label for diagonals from "r" to "d"
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5515 99fdad57-331a-0410-800a-d7fa5415bdb3
instantiation and create a partially formed instance. During measurement
instantiation, we complete that instance.
- leak.supp: finally figured out how to write a valgrind suppression file
- fped.c: we don't need the FPED_NO_GUI kludge anymore
- fped.c: moved gui_cleanup_style to gui_main
- dereference icons (seems that this doesn't deallocate everything, though)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5514 99fdad57-331a-0410-800a-d7fa5415bdb3
- deallocate all our data structures on exit (to help find memory leaks, bad
pointers, and general logic errors)
- fixed memory leak when allocating pad names in instantiation
- added "magic" environment variable FPED_NO_GUI to run fped without
initializing Gtk+
- added valgrind wrapper "leakcheck"
- delete.c: destroy() now requires a deletion to exist
- vacate_op: free string expressions
- destroy_obj: free measurement labels
- delete_references: use do_delete_obj so the we don't bump the group number
- delete_frame: delete references after deleting the frame itself, so they end
up on the stack above the frame and get destroyed first
- do_delete_vec: like above, even though it doesn't matter here
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5506 99fdad57-331a-0410-800a-d7fa5415bdb3
- removed in_path logic (never missed not having it) and made selected vectors
a little brighter
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5484 99fdad57-331a-0410-800a-d7fa5415bdb3
FOR_ALL_INSTS
- several functions only walked the active package instances, so we couldn't
access the origin of the root frame
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5482 99fdad57-331a-0410-800a-d7fa5415bdb3
- we freed a package's samples list after recalculating the number of samples,
which caused a crash after adding a new vector. We now record the original
list length in the package structure.
- when dragging a circle, offer the end point first, so that it becomes an arc
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5480 99fdad57-331a-0410-800a-d7fa5415bdb3
- README: added build prerequisites
- "part name" is now more correctly called "package name"
- changed keyword "part" to "package"
- removed inst_debug and struct inst_ops.debug functions - never really used
them anyway
- we can now generate multiple packages from a single file
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5478 99fdad57-331a-0410-800a-d7fa5415bdb3
- we can now scroll-wheel through table rows
- added menu branch "View" with zoom and var/code display controls
- commented out is_min_of_next until its fate is decided, so that we don't get
a warning
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5462 99fdad57-331a-0410-800a-d7fa5415bdb3
- Makfile: added "install" and "uninstall" targets
- when deleting the currently active frame reference, reset active_ref of the
frame, so that it can be set to a new value later
- during instantiation, circles were classified as arcs
- end point of KiCad circle didn't mirror the Y axis
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5457 99fdad57-331a-0410-800a-d7fa5415bdb3
- added unit status and selection (in lower right corner)
- added automatic unit selection
- pointer coordinates are now shown with their unit
- updated display of X, Y, width, offset, and radius for unit selection
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5454 99fdad57-331a-0410-800a-d7fa5415bdb3
is still connected. This prevents surprises when making extensive changes
during instantiation failure.
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5445 99fdad57-331a-0410-800a-d7fa5415bdb3
instance is found. This allows recovery from mistakes where a failing item
never gets instantiated.
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5434 99fdad57-331a-0410-800a-d7fa5415bdb3
- having variables and items on the screen at the same time was too much. We
can now toggle with "/" while the canvas has the focus. (This needs better
controls.)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5425 99fdad57-331a-0410-800a-d7fa5415bdb3
- active items can now be selected from the item list (selecting inactive items
will be a little harder)
git-svn-id: http://svn.openmoko.org/trunk/eda/fped@5424 99fdad57-331a-0410-800a-d7fa5415bdb3
