Werner Almesberger
247b1de23f
components/cc2543.lib: increase pin spacing by 1.5x
2014-01-09 01:25:51 -03:00
Werner Almesberger
66f316b873
components/switch.lib: add SW-SPDT-S4 (on-on switch with four shell pads)
2014-01-08 22:54:50 -03:00
Werner Almesberger
573eb8141c
components/kl25-32.lib: Freescale Kinetis KL25 in 32 pin package
2014-01-05 14:56:18 -03:00
Werner Almesberger
ca42a06c03
components/usb-a-s4.lib: USB A connector with four ground contacts
2014-01-05 14:27:02 -03:00
Werner Almesberger
c4a877ab3f
components/Makefile (missing): also check components.pro
2014-01-05 13:56:26 -03:00
Werner Almesberger
85ae339ae6
components/components.pro: add aat1217, attiny87-dual, cc2543, dc_jack, testpoint, zener
...
Forgot them before.
2014-01-05 13:31:38 -03:00
Werner Almesberger
8f98ab74f8
components/cc2543.lib: TI CC2543 2.4 GHz RF SoC
2014-01-03 19:42:53 -03:00
Werner Almesberger
b32bd32227
components/kl25-48.lib: add pin 49 for the center pad
2013-09-16 06:55:50 -03:00
Werner Almesberger
18ed84d831
add C&K JS102011SAQN SPDT SMT switch (symbol and footprint)
2013-09-16 06:45:21 -03:00
Werner Almesberger
c5278c5845
components/er-oled-fpc30.lib: change pin 30 from NC to GND
...
The documentation says it's not used but should be connected to GND for
ESD protection.
2013-09-16 05:17:46 -03:00
Werner Almesberger
dc5ce7a31a
components/aat1217.lib: Skyworks AAT1217 step-up converter
2013-09-15 21:41:29 -03:00
Werner Almesberger
3f1b978b2b
add C&K TSWA series switch with 22 mm wheel
2013-09-15 16:15:06 -03:00
Werner Almesberger
2aa3233623
flip er-oled-fpc30.fpd; add new footprints to Makefile; fix comp ref in kl25-48.lib
2013-09-15 15:43:46 -03:00
Werner Almesberger
4a9b06e741
components/memcard8.lib: add MEMCARD8-SHIELD3-SW1 for Amphenol 10100660
2013-09-15 10:18:48 -03:00
Werner Almesberger
2c26373d24
add EastRising OLED FPC-30 connector (symbol and footprint)
2013-09-15 10:13:16 -03:00
Werner Almesberger
38cb8de06d
components/: add Freescale Kinetis KL25 in 48 pin package
2013-09-15 10:02:25 -03:00
Werner Almesberger
435a339dce
components/tps6216x.lib: add 9th pin for center pad (AGND)
2012-12-26 20:57:27 -03:00
Werner Almesberger
0b75a76ea3
components/inductor.lib: general inductor, reusing filter.lib by Adam Wang
2012-12-22 23:12:56 -03:00
Werner Almesberger
a50f086b6c
components/memcard8.lib: MEMCARD8 variants MEMCARD8-SHIELD4 and MEMCARD8-SHIELD4-SW
...
For Amphenol 101-00303 and 114-00841-68
2012-12-22 19:58:47 -03:00
Werner Almesberger
8881356864
components/lis3dh.lib: ST LIS3DH 3-axis acceleration sensor
2012-12-22 16:30:39 -03:00
Werner Almesberger
2e07473015
include common/Makefile after "all", so that it won't override the default
2012-12-21 20:27:39 -03:00
Werner Almesberger
21513c1c61
title page: always generate title.ps when generating the catalog
...
In order to keep "phony" title.ps from triggering a catalog rebuild when
nothing has changed, we also have to remove it as a dependency from
"catalog", and just invoke "make" explicitly.
2012-12-21 20:25:35 -03:00
Werner Almesberger
a841da7f79
components/: TI TPS6216x series 3V-17V 1A Step-Down Converters
2012-12-21 19:28:12 -03:00
Werner Almesberger
e324adc35a
add title pages to the catalogs, with useful information like the creation date
2012-12-21 00:51:20 -03:00
Werner Almesberger
1f0d15cc80
components/lpc1100-qfn33.lib: remove dubious "R" (reserved) pin function
...
NXP put "R" as the first name of some pins, e.g., R/PIO1_2/AD3/CT32B1_MAT
This is meant to indicate that it may have a possible extra function
which doesn't exist in the present implementation.
The whole concept seems bogus. First of all, there are several pins with
supposedly different roles but all with a common name. Second, one isn't
even supposed to set the pin configuration register to a value selecting
this "reserved" function. Third, there are several other pins that also
have unused codepoints in their function settings, e.g., PIO0_3 or
PIO0_4/SCL but there's no "R" in evidence there.
So that "R" doesnt seem to make any sense, may cause confusion, and
makes the symbol more crowded.
2012-12-20 19:45:19 -03:00
Werner Almesberger
ecba9a3874
components/lpc1100-qfn33.lib: NXP LPC11xx series in HVQFN33 package
2012-12-20 18:26:23 -03:00
Werner Almesberger
e10d1e92a0
components/HIERARCHY: add XC6SLX9-CSG324
2012-12-20 18:01:54 -03:00
Xiangfu
4d435f3782
xc6slx9-csg324: fix the P13 pin label
2012-11-07 16:01:15 +08:00
Xiangfu
2dd276847d
xc6slx9-csg324: add all other pins
2012-11-07 15:39:52 +08:00
Xiangfu
1c03185f1b
xc6slx9-csg324: add dedicate pins (jtag etc)
2012-11-07 14:34:28 +08:00
Xiangfu
e99a94769a
xc6slx9-csg324: add power/gnd pins
2012-11-07 14:25:34 +08:00
Xiangfu
aa255fbcc0
add xc6slx9-csg324 base on ftg256
2012-11-07 12:05:54 +08:00
Werner Almesberger
2ed2889fe1
add Panasonic EVQQ7 "joystick" switch
...
Footprint is just draft quality for now.
2012-11-05 17:47:12 -03:00
Werner Almesberger
169136f47d
components/con.lib: fix typo "CD/DAT2" vs. "CD/DAT3"
2012-11-05 16:34:06 -03:00
Werner Almesberger
a1f4f815c0
add nmosfet-gsd (N-Channel MOSFET, G-S-D pin order) component
2012-11-03 00:10:08 -03:00
Werner Almesberger
fde85af34e
add 74x585 (shift register with latch and 3-state output) component
2012-11-02 23:22:00 -03:00
Werner Almesberger
01a34a85d6
components/: add ATtiny87/167 (in dual-in-line packages, i.e., TSSOP and SIOC)
2012-08-03 21:05:43 -03:00
Werner Almesberger
937d55f452
components/HIERARCHY: add XC6SLXN-TQG144
2012-08-03 21:04:04 -03:00
Werner Almesberger
1e22d3e260
components/EXPAND: rename to HIERARCHY
2012-08-03 21:01:37 -03:00
Xiangfu
dd67cef439
add AUTHOR/pro info about xc6slx9-tqg144
2012-07-20 11:28:52 +08:00
Xiangfu
880f009c07
copy cx6slx9 from azonenberg lib
2012-07-20 11:28:52 +08:00
Werner Almesberger
8114d1d93f
track "gencat" to "genkicat" name change
2012-07-12 20:15:12 -03:00
Werner Almesberger
41befc98a9
components/Makefile: change name of "genex" to "gencat"
2012-07-11 12:32:52 -03:00
Werner Almesberger
6ecb8514fd
componens/adxl32x.lib: add pin for pad; put into components.pro
...
Removed "gencon" from components.pro since the latter shouldn't be
edited manually. We may still want to have it temporarily for
debugging, but this can be done ad hoc.
2012-06-11 07:19:12 -03:00
Werner Almesberger
49fa1abace
components/Makefile: "make" now generates instead of running "make sch"
...
At the moment, we generate gencon.lib, but there may be more in the
future.
2012-06-11 07:10:45 -03:00
Werner Almesberger
96c7eb392c
components/adxl32x.lib: Analog Devices ADXL321, ... accelerometers
...
http://www.analog.com/static/imported-files/data_sheets/ADXL321.pdf
2012-06-10 11:32:13 -03:00
Werner Almesberger
78640707f4
components/: generate for connectors CONN_1 to CONN_40X2 (in gencon.lib)
...
This creates name collisions with manually created connectors in
con.lib, which we may want to resolve.
2012-06-09 22:28:58 -03:00
Adam Wang
c912dfdee1
AP21X2A: more spacing between text lines
2012-05-17 10:44:22 +08:00
Adam Wang
25bc402d2c
6N138: added arrows
2012-05-17 10:13:52 +08:00
Adam Wang
541d4dbb4c
CONN_10X2: set pin name invisible.
2012-05-17 09:50:25 +08:00
