Werner Almesberger
e83674a65a
modules/HIERARCHY: added more sub-caregories for Connector/{SMT, TH}
...
For USB, uSD, and batteries
2014-06-01 02:19:23 -03:00
Werner Almesberger
b7d32fa1aa
modules/1059.fpd (1059, 1060): Keystone CR2032 battery holders (TH and SMT)
2014-06-01 02:10:34 -03:00
Werner Almesberger
bd3663707e
modules/stdpass.fpd (xtal2-3.2mmx1.5mm): add crystal footprint
...
Not really a standard footprint, but since it fits the general pattern
so well ...
2014-05-20 14:49:00 -03:00
Werner Almesberger
083e2b0943
modules/sod.fpd: added SOD-323
...
Based on:
http://www.nxp.com/documents/reflow_soldering/sod323_fr.pdf
file:///home/root/Downloads/SOD-323PD.pdf
http://www.diodes.com/datasheets/ZLLS400.pdf
http://www.infineon.com/cms/packages/SMD_-_Surface_Mounted_Devices/SOD/SOD323_xSC76x.html
2014-05-13 10:45:01 -03:00
Werner Almesberger
a89a1d5caf
modules/spacer.fpd: add 7.5 mm clearance (bare screw/nut)
2014-01-31 14:41:06 -03:00
Werner Almesberger
63e8c0d205
modules/HIERARCHY: move FIDUCIAL from "Mechanical" to "Structure"
2014-01-31 14:17:37 -03:00
Werner Almesberger
feb85080b2
modules/HIERARCHY: give switches their own top-level category
2014-01-31 14:17:37 -03:00
Werner Almesberger
384ad5ec08
modules/pogo.fpd: add Mill-Max 09xx series TH pogo pins
2014-01-31 14:17:37 -03:00
Werner Almesberger
d83737d636
modules/usb_a_rcpt_mid.fpd: enlarge 48458 bay by tolerance
2014-01-18 16:09:33 -03:00
Werner Almesberger
76039af549
modules/pads.fpd: add -NOSILK variants; add silk measurements for rectangular pads
2014-01-17 20:20:56 -03:00
Werner Almesberger
5bfda4d341
modules/meander-2450MHz.fpd: 1.6 mm variant from CC-Antenna-DK, board #15
...
Discussion:
http://e2e.ti.com/support/low_power_rf/f/155/p/146031/528211.aspx
Design Note DN031:
http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=swra328&fileType=pdf
Layout:
http://www.ti.com/lit/zip/swrr070
The antenna layout is in the file "CC-Antenna-DK - EtchLayer1Top.gdo"
2014-01-16 12:53:16 -03:00
Werner Almesberger
b0352b4259
modules/usb_a_rcpt_mid.fpd: remove solder paste from through-holes
2014-01-15 21:59:07 -03:00
Werner Almesberger
83fc1ab657
modules/qfn.fpd (QFN32-CC2543): experimental footprint with large center hole (for DIY)
2014-01-15 21:54:05 -03:00
Werner Almesberger
6b825eb872
modules/qfn.fpd (QFN32-Freescale): make pads round to increase clearance
2014-01-14 03:30:09 -03:00
Werner Almesberger
fc2d104008
modules/sw-spdt-smt.fpd: add SW-CUS12B (for Copal CUS-12B and C&K PCM12SMTR)
2014-01-07 21:07:59 -03:00
Werner Almesberger
065199a87e
modules/qfn.fpd (QFN32-Freescale): add footprint for KL25 in 32QFN package
2014-01-05 16:53:49 -03:00
Werner Almesberger
62c90e2bf3
modules/lp2032sm.fpd: MPD Surface Mount Battery Holders for CR2032 (draft)
...
The data sheets don't seem very reliable. Check against real parts.
2014-01-05 16:12:05 -03:00
Werner Almesberger
1b997b80eb
modules/usb_a_rcpt_mid.fpd: correct 48258 drill hole; make pin pads oval
...
By making the pin pads slightly oval (1.85:2) the clearance between pins
2 and 3 is now about 0.296 mm / 11.6 mil.
2014-01-05 15:30:48 -03:00
Werner Almesberger
b19e249644
modules/usb_a_rcpt_mid.fpd: Molex 48258-0002/0001, TE 1746311
2014-01-05 12:09:57 -03:00
Werner Almesberger
bcb5563136
modules/usb_a_rcpt_smt.fpd: USB A receptacle
...
CnC Tech 1002-002-01100, Assmann AU-Y1006-2-R, etc.
2013-10-25 20:45:38 -03:00
Werner Almesberger
e15d2b546b
modules/sw-spdt-smt.fpd: draw complete outline of case
2013-09-30 04:51:48 -03:00
Werner Almesberger
2f412033e4
modules/zx62-b-5pa.fpd: add ZX62R-B-5P (Micro-USB B reversed) footprint
2013-09-25 13:17:57 -03:00
Werner Almesberger
4e10389041
modules/tswa.fpd: add more measurements
2013-09-20 20:30:33 -03:00
Werner Almesberger
1bed1223a0
modules/er-oled-fpc30.fpd: make pads 0.06 mm wider, 0.1 mm longer
2013-09-20 15:01:29 -03:00
Werner Almesberger
18ed84d831
add C&K JS102011SAQN SPDT SMT switch (symbol and footprint)
2013-09-16 06:45:21 -03:00
Werner Almesberger
784f0e6221
modules/sot.fpd: add 236 (23-6) footprint
2013-09-15 21:42:04 -03:00
Werner Almesberger
2cf146cce3
modules/stdpass.fpd: add 1008 (for Samsung CIG22L4R7MNE inductor)
2013-09-15 21:22:23 -03:00
Werner Almesberger
a808cc1486
modules/tswa.fpd: add hole to through-hole pads
2013-09-15 21:21:43 -03:00
Werner Almesberger
a6aca6ef9a
HIERARCHY: change QFN32-Freescale to QFN48-Freescale
2013-09-15 16:16:56 -03:00
Werner Almesberger
3f1b978b2b
add C&K TSWA series switch with 22 mm wheel
2013-09-15 16:15:06 -03:00
Werner Almesberger
2aa3233623
flip er-oled-fpc30.fpd; add new footprints to Makefile; fix comp ref in kl25-48.lib
2013-09-15 15:43:46 -03:00
Werner Almesberger
81c2a48461
modules/memcard8-amp-10100660.fpd: Amphenol 10100660 footprint (draft)
2013-09-15 11:26:47 -03:00
Werner Almesberger
2c26373d24
add EastRising OLED FPC-30 connector (symbol and footprint)
2013-09-15 10:13:16 -03:00
Werner Almesberger
e8e6813724
modules/qfn.fpd: add QFN48-Freescale for KL25 chips (draft)
2013-09-14 23:16:22 -03:00
Werner Almesberger
b3d76021a0
modules/inductor-2p.fpd: footprints for 2-SMD inductors (3mmx3mm for now)
2012-12-22 22:22:41 -03:00
Werner Almesberger
6b6eaf674c
modules/8_10-socket-ra-push-pull.fpd: Amphenol 114-00841-68 push-pull uSD
2012-12-22 22:01:06 -03:00
Werner Almesberger
5c3043affc
modules/lga.fpd: LGA-16-3x3 package, for LIS3DH
2012-12-22 18:50:44 -03:00
Werner Almesberger
72b0c31f3e
Merge branch 'master' of projects.qi-hardware.com:kicad-libs
2012-12-21 20:35:09 -03:00
Werner Almesberger
2e07473015
include common/Makefile after "all", so that it won't override the default
2012-12-21 20:27:39 -03:00
Werner Almesberger
21513c1c61
title page: always generate title.ps when generating the catalog
...
In order to keep "phony" title.ps from triggering a catalog rebuild when
nothing has changed, we also have to remove it as a dependency from
"catalog", and just invoke "make" explicitly.
2012-12-21 20:25:35 -03:00
Werner Almesberger
694cebf972
modules/dfn.fpd: DFN-8 (aka TI's WSON-8) package, for TPS6216x
2012-12-21 20:22:17 -03:00
Xiangfu
b3fcc764f5
bga: use the nominal size
2012-12-21 22:32:53 +08:00
Werner Almesberger
e324adc35a
add title pages to the catalogs, with useful information like the creation date
2012-12-21 00:51:20 -03:00
Werner Almesberger
cce90811d9
modules/: "make brd" opens pcbnew for footprint examination
...
The profile is automatically generated from the list of modules.
2012-12-20 22:42:55 -03:00
Werner Almesberger
94f902495c
modules/: add QFN32-HVQFN (e.g., for NXP LPC1xxx parts)
2012-12-20 22:13:13 -03:00
Werner Almesberger
3ae4978fe8
modules/HIERARCHY: add BGA-256
2012-12-20 22:12:30 -03:00
Werner Almesberger
d9727bbc35
modules/qfn.fpd: NXP "HVQFN33" footprint (without the vias)
...
This is just the basic geometry. The fancy vias need an extension of the
QFN model.
2012-12-20 20:18:49 -03:00
Xiangfu
43aba44c9c
bga.fpd: add ft256
2012-11-22 22:00:20 +08:00
Werner Almesberger
2ed2889fe1
add Panasonic EVQQ7 "joystick" switch
...
Footprint is just draft quality for now.
2012-11-05 17:47:12 -03:00
Werner Almesberger
a82eb0b3f6
modules/ssop.fpd: add TSSOP-16
2012-11-02 23:34:45 -03:00
