| .. |
|
8_10-card.fpd
|
8_10-card.fpd: set pad type to "bare", so the we don't get solder paste on them
|
2011-01-17 22:14:25 -03:00 |
|
bat-clip-aa-th.fpd
|
modules/bat-clip-aa-th.fpd: open clip for AA batteries, through-hole
|
2012-06-06 19:08:46 -03:00 |
|
bga.fpd
|
bga.fpd: added module for Altera 484-FineLine BGA(FBGA) and Xilinx FG(G)484 Fine-Pitch BGA, 1.00 mm pitch
|
2012-06-05 14:27:02 +08:00 |
|
dip4of6.fpd
|
dip.fpd, dip4of6.fpd: copied both from /labsw/modules
|
2012-05-22 11:34:50 +08:00 |
|
dip.fpd
|
dip.fpd, dip4of6.fpd: copied both from /labsw/modules
|
2012-05-22 11:34:50 +08:00 |
|
do-214.fpd
|
do-214.fpd: added DO-214AA package
|
2012-06-06 15:57:00 +08:00 |
|
eus.fpd
|
eus.fpd: smarter codes from Werner Almesberger
|
2012-06-01 16:24:01 +08:00 |
|
fiducial.fpd
|
modules/INFO, modules/Makefile, modules/fiducial.fpd, AUTHORS: added fiducial
|
2011-03-23 12:33:40 -03:00 |
|
INFO
|
xtal-4.fpd:
|
2012-06-07 10:33:19 +08:00 |
|
ir.fpd
|
ir.fpd: added front edge silkscreen
|
2012-05-29 08:39:07 +08:00 |
|
ledsmd.fpd
|
ledsmd.fpd: added LEDSMD-0603R for right angle LED land pattern. Not include light shadow area.
|
2012-06-06 16:59:41 +08:00 |
|
Makefile
|
modules/sot.fpd: experimental "generic" SOT footprint
|
2011-08-16 15:58:26 -03:00 |
|
mdip.fpd
|
mdip.fpd: 1) set mil unit 2) added measurements 3) set width = 355 mil
|
2012-05-23 17:28:22 +08:00 |
|
mini-usb.fpd
|
Moved mini-usb.fpd and usb_a_plug_smt.fpd from ben-wpan to kicad-libs (incoming)
|
2011-08-14 03:06:15 -03:00 |
|
pads.fpd
|
modules/pads.fpd: added 80 mil / 2 mm circular pad "PAD_80x80"
|
2011-02-03 13:47:08 -03:00 |
|
qfn.fpd
|
modules/qfn.fpd (QFN28-MCHP-ML): footprint for Microchip 0.65 mm 28QFN package
|
2011-08-16 12:29:18 -03:00 |
|
qfp-gen.fpd
|
modules/qfp-gen.fpd: further improvements (WIP)
|
2012-05-29 21:52:30 -03:00 |
|
qfp.fpd
|
qfp.fpd: added QFP64 variant
|
2012-06-04 16:46:19 +08:00 |
|
soic.fpd
|
added SOIC footprints: 8, 14 and 16 pins.
|
2012-05-28 13:53:41 +08:00 |
|
sot23.fpd
|
sot23.fpd: added measurement for max. distance between pads.
|
2012-06-06 11:05:40 +08:00 |
|
sot-323.fpd
|
Moved sot-323.fpd from ben-wpan to kicad-libs (incoming)
|
2011-08-14 04:49:36 -03:00 |
|
sot.fpd
|
modules/sot.fpd: experimental "generic" SOT footprint
|
2011-08-16 15:58:26 -03:00 |
|
ssop.fpd
|
ssop.fpd: added TSSOP14 variant and move marker placed at outside of left lower corner.
|
2012-06-04 15:51:29 +08:00 |
|
stdpass.fpd
|
stdpass.fpd: added a cathode for polarized variants(xxxxP) started from 0603
|
2012-06-07 09:08:32 +08:00 |
|
to.fpd
|
to.fpd: added TO-263 variant
|
2012-06-04 10:22:24 +08:00 |
|
tsop.fpd
|
tsop.fpd: changed measurements and moved marker to be close to pin1's left side.
|
2012-06-05 22:19:26 +08:00 |
|
tssop5.fpd
|
tssop5.fpd: TSSOP5 for NXP
|
2012-06-06 10:32:33 +08:00 |
|
usb_a_plug_smt.fpd
|
Moved mini-usb.fpd and usb_a_plug_smt.fpd from ben-wpan to kicad-libs (incoming)
|
2011-08-14 03:06:15 -03:00 |
|
usb-a-pcb.fpd
|
Moved usb-a-pcb.fpd from f32xbase/c2usb to kicad-libs (incoming)
|
2011-08-14 04:02:18 -03:00 |
|
xtal-4.fpd
|
xtal-4.fpd:
|
2012-06-07 10:33:19 +08:00 |
|
zx62m-b-5p.fpd
|
modules/zx62m-b-5p.fpd: Hirose ZX62M-B-5P Micro-USB receptacle (mid-mount)
|
2012-04-01 20:12:02 -03:00 |
3baf66a3de