mirror of
git://projects.qi-hardware.com/nn-usb-fpga.git
synced 2025-01-05 23:40:15 +02:00
Update SAKC kernel.
This commit is contained in:
Juan64Bits
parent
ed551e41bd
commit
f494635faf
@ -0,0 +1,35 @@
|
||||
/*
|
||||
* Copyright (c) 2009 Qi Hardware Inc.,
|
||||
* Author: Xiangfu Liu <xiangfu@qi-hardware.com>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_JZ4725_SAKC_H__
|
||||
#define __ASM_JZ4725_SAKC_H__
|
||||
|
||||
#include <linux/gpio.h>
|
||||
/*
|
||||
* Frequencies of on-board oscillators
|
||||
*/
|
||||
#define JZ_EXTAL 12000000 /* Main extal freq: 12 MHz */
|
||||
#define JZ_EXTAL_RTC 32768 /* RTC extal freq: 32.768 KHz */
|
||||
|
||||
/*
|
||||
* GPIO
|
||||
*/
|
||||
|
||||
#define GPIO_SD_CD_N JZ_GPIO_PORTC(27)
|
||||
|
||||
#endif /* __ASM_JZ4725_SAKC_H__ */
|
||||
@ -0,0 +1,42 @@
|
||||
/*
|
||||
* linux/include/asm-mips/mach-jz4740/jz4740.h
|
||||
*
|
||||
* JZ4740 common definition.
|
||||
*
|
||||
* Copyright (C) 2006 - 2007 Ingenic Semiconductor Inc.
|
||||
*
|
||||
* Author: <lhhuang@ingenic.cn>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_JZ4740_H__
|
||||
#define __ASM_JZ4740_H__
|
||||
|
||||
#include <asm/mach-jz4740/regs.h>
|
||||
#include <asm/mach-jz4740/dma.h>
|
||||
|
||||
/*------------------------------------------------------------------
|
||||
* Platform definitions
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_JZ4740_QI_LB60
|
||||
#include <asm/mach-jz4740/board-qi_lb60.h>
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_JZ4725_SAKC
|
||||
#include <asm/mach-jz4740/board-sakc.h>
|
||||
#endif
|
||||
|
||||
/* Add other platform definition here ... */
|
||||
|
||||
|
||||
/*------------------------------------------------------------------
|
||||
* Follows are related to platform definitions
|
||||
*/
|
||||
|
||||
#include <asm/mach-jz4740/serial.h>
|
||||
|
||||
#endif /* __ASM_JZ4740_H__ */
|
||||
40
linux-2.6.32.7_sakc/arch/mips/jz4740/Kconfig
Normal file
40
linux-2.6.32.7_sakc/arch/mips/jz4740/Kconfig
Normal file
@ -0,0 +1,40 @@
|
||||
choice
|
||||
prompt "Machine type"
|
||||
depends on MACH_JZ
|
||||
default JZ4740_QI_LB60
|
||||
|
||||
config JZ4740_QI_LB60
|
||||
bool "Qi Hardware Ben NanoNote"
|
||||
select DMA_NONCOHERENT
|
||||
select SOC_JZ4740
|
||||
|
||||
config JZ4725_SAKC
|
||||
bool "Qi Hardware SAKC FPGA board"
|
||||
select DMA_NONCOHERENT
|
||||
select SOC_JZ4740
|
||||
|
||||
config JZ4740_N526
|
||||
bool "Hanvon n526 eBook reader"
|
||||
select DMA_NONCOHERENT
|
||||
select SOC_JZ4740
|
||||
|
||||
|
||||
endchoice
|
||||
|
||||
config SOC_JZ4740
|
||||
bool
|
||||
select JZSOC
|
||||
select GENERIC_GPIO
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select SYS_HAS_EARLY_PRINTK
|
||||
select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
select IRQ_CPU
|
||||
|
||||
config JZSOC
|
||||
bool
|
||||
select JZRISC
|
||||
select SYS_HAS_CPU_MIPS32_R1
|
||||
select SYS_SUPPORTS_32BIT_KERNEL
|
||||
|
||||
config JZRISC
|
||||
bool
|
||||
21
linux-2.6.32.7_sakc/arch/mips/jz4740/Makefile
Normal file
21
linux-2.6.32.7_sakc/arch/mips/jz4740/Makefile
Normal file
@ -0,0 +1,21 @@
|
||||
#
|
||||
# Makefile for the Ingenic JZ4740.
|
||||
#
|
||||
|
||||
# Object file lists.
|
||||
|
||||
obj-y += prom.o irq.o time.o reset.o setup.o dma.o \
|
||||
gpio.o clock.o platform.o
|
||||
|
||||
obj-$(CONFIG_DEBUG_FS) += clock-debugfs.o
|
||||
|
||||
# board specific support
|
||||
|
||||
obj-$(CONFIG_JZ4740_QI_LB60) += board-qi_lb60.o
|
||||
obj-$(CONFIG_JZ4740_N526) += board-n526.o
|
||||
obj-$(CONFIG_JZ4725_SAKC) += board-sakc.o
|
||||
|
||||
# PM support
|
||||
|
||||
obj-$(CONFIG_PM) +=pm.o
|
||||
|
||||
245
linux-2.6.32.7_sakc/arch/mips/jz4740/board-sakc.c
Normal file
245
linux-2.6.32.7_sakc/arch/mips/jz4740/board-sakc.c
Normal file
@ -0,0 +1,245 @@
|
||||
/*
|
||||
* linux/arch/mips/jz4740/board-sakc.c
|
||||
*
|
||||
* SAKC setup routines, based on QI_LB60
|
||||
*
|
||||
* Copyright (c) 2009 Qi Hardware inc.,
|
||||
* Author: Xiangfu Liu <xiangfu@qi-hardware.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 or later
|
||||
* as published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/gpio.h>
|
||||
|
||||
#include <asm/mach-jz4740/board-sakc.h>
|
||||
#include <asm/mach-jz4740/platform.h>
|
||||
|
||||
#include <linux/input.h>
|
||||
//#include <linux/gpio_keys.h>
|
||||
#include <linux/mtd/jz4740_nand.h>
|
||||
#include <linux/jz4740_fb.h>
|
||||
//#include <linux/input/matrix_keypad.h>
|
||||
#include <linux/mtd/jz4740_nand.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/spi_gpio.h>
|
||||
//#include <linux/power_supply.h>
|
||||
//#include <linux/power/jz4740-battery.h>
|
||||
//#include <linux/power/gpio-charger.h>
|
||||
#include <linux/mmc/jz4740_mmc.h>
|
||||
|
||||
|
||||
/* NAND */
|
||||
static struct nand_ecclayout sakc_ecclayout_1gb = {
|
||||
.eccbytes = 36,
|
||||
.eccpos = {
|
||||
6, 7, 8, 9, 10, 11, 12, 13,
|
||||
14, 15, 16, 17, 18, 19, 20, 21,
|
||||
22, 23, 24, 25, 26, 27, 28, 29,
|
||||
30, 31, 32, 33, 34, 35, 36, 37,
|
||||
38, 39, 40, 41},
|
||||
.oobfree = {
|
||||
{.offset = 2,
|
||||
.length = 4},
|
||||
{.offset = 42,
|
||||
.length = 22}}
|
||||
};
|
||||
|
||||
static struct mtd_partition sakc_partitions_1gb[] = {
|
||||
{ .name = "NAND BOOT partition",
|
||||
.offset = 0 * 0x100000,
|
||||
.size = 4 * 0x100000,
|
||||
},
|
||||
{ .name = "NAND KERNEL partition",
|
||||
.offset = 4 * 0x100000,
|
||||
.size = 4 * 0x100000,
|
||||
},
|
||||
{ .name = "NAND ROOTFS partition",
|
||||
.offset = 8 * 0x100000,
|
||||
.size = (504 + 512) * 0x100000,
|
||||
},
|
||||
};
|
||||
|
||||
static struct nand_ecclayout sakc_ecclayout_2gb = {
|
||||
.eccbytes = 72,
|
||||
.eccpos = {
|
||||
12, 13, 14, 15, 16, 17, 18, 19,
|
||||
20, 21, 22, 23, 24, 25, 26, 27,
|
||||
28, 29, 30, 31, 32, 33, 34, 35,
|
||||
36, 37, 38, 39, 40, 41, 42, 43,
|
||||
44, 45, 46, 47, 48, 49, 50, 51,
|
||||
52, 53, 54, 55, 56, 57, 58, 59,
|
||||
60, 61, 62, 63, 64, 65, 66, 67,
|
||||
68, 69, 70, 71, 72, 73, 74, 75,
|
||||
76, 77, 78, 79, 80, 81, 82, 83},
|
||||
.oobfree = {
|
||||
{.offset = 2,
|
||||
.length = 10},
|
||||
{.offset = 84,
|
||||
.length = 44}}
|
||||
};
|
||||
|
||||
static struct mtd_partition sakc_partitions_2gb[] = {
|
||||
{ .name = "NAND BOOT partition",
|
||||
.offset = 0 * 0x100000,
|
||||
.size = 4 * 0x100000,
|
||||
},
|
||||
{ .name = "NAND KERNEL partition",
|
||||
.offset = 4 * 0x100000,
|
||||
.size = 4 * 0x100000,
|
||||
},
|
||||
{ .name = "NAND ROOTFS partition",
|
||||
.offset = 8 * 0x100000,
|
||||
.size = (504 + 512 + 1024) * 0x100000,
|
||||
},
|
||||
};
|
||||
|
||||
static void sakc_nand_ident(struct platform_device *pdev,
|
||||
struct nand_chip *chip,
|
||||
struct mtd_partition **partitions,
|
||||
int *num_partitions)
|
||||
{
|
||||
if (chip->page_shift == 12) {
|
||||
chip->ecc.layout = &sakc_ecclayout_2gb;
|
||||
*partitions = sakc_partitions_2gb;
|
||||
*num_partitions = ARRAY_SIZE(sakc_partitions_2gb);
|
||||
} else {
|
||||
chip->ecc.layout = &sakc_ecclayout_1gb;
|
||||
*partitions = sakc_partitions_1gb;
|
||||
*num_partitions = ARRAY_SIZE(sakc_partitions_1gb);
|
||||
}
|
||||
}
|
||||
|
||||
static struct jz_nand_platform_data sakc_nand_pdata = {
|
||||
.ident_callback = sakc_nand_ident,
|
||||
.busy_gpio = 94,
|
||||
};
|
||||
|
||||
|
||||
/* Display */
|
||||
static struct fb_videomode sakc_video_modes[] = {
|
||||
{
|
||||
.name = "320x240",
|
||||
.xres = 320,
|
||||
.yres = 240,
|
||||
.pixclock = 700000,
|
||||
.left_margin = 140,
|
||||
.right_margin = 273,
|
||||
.upper_margin = 20,
|
||||
.lower_margin = 2,
|
||||
.hsync_len = 1,
|
||||
.vsync_len = 1,
|
||||
.sync = 0,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
},
|
||||
};
|
||||
|
||||
static struct jz4740_fb_platform_data sakc_fb_pdata = {
|
||||
.width = 60,
|
||||
.height = 45,
|
||||
.num_modes = ARRAY_SIZE(sakc_video_modes),
|
||||
.modes = sakc_video_modes,
|
||||
.bpp = 24,
|
||||
.lcd_type = JZ_LCD_TYPE_8BIT_SERIAL,
|
||||
};
|
||||
|
||||
|
||||
struct spi_gpio_platform_data spigpio_platform_data = {
|
||||
.sck = JZ_GPIO_PORTC(23),
|
||||
.mosi = JZ_GPIO_PORTC(22),
|
||||
.miso = JZ_GPIO_PORTC(22),
|
||||
.num_chipselect = 1,
|
||||
};
|
||||
|
||||
static struct platform_device spigpio_device = {
|
||||
.name = "spi_gpio",
|
||||
.id = 1,
|
||||
.dev = {
|
||||
.platform_data = &spigpio_platform_data,
|
||||
},
|
||||
};
|
||||
|
||||
static struct spi_board_info sakc_spi_board_info[] = {
|
||||
{
|
||||
.modalias = "gpm940b0",
|
||||
.controller_data = (void*)JZ_GPIO_PORTC(21),
|
||||
.chip_select = 0,
|
||||
.bus_num = 1,
|
||||
.max_speed_hz = 30 * 1000,
|
||||
},
|
||||
};
|
||||
|
||||
/* MMC */
|
||||
|
||||
static struct jz4740_mmc_platform_data sakc_mmc_pdata = {
|
||||
.gpio_card_detect = JZ_GPIO_PORTC(27),
|
||||
.gpio_read_only = -1,
|
||||
.gpio_power = -1,
|
||||
.power_active_low = 1,
|
||||
.data_1bit = 1,
|
||||
};
|
||||
|
||||
static struct platform_device *jz_platform_devices[] __initdata = {
|
||||
&jz4740_usb_ohci_device,
|
||||
&jz4740_usb_gdt_device,
|
||||
&jz4740_mmc_device,
|
||||
&jz4740_nand_device,
|
||||
&spigpio_device,
|
||||
&jz4740_framebuffer_device,
|
||||
&jz4740_i2s_device,
|
||||
&jz4740_codec_device,
|
||||
&jz4740_rtc_device,
|
||||
&jz4740_adc_device,
|
||||
};
|
||||
|
||||
static void __init board_gpio_setup(void)
|
||||
{
|
||||
/* We only need to enable/disable pullup here for pins used in generic
|
||||
* drivers. Everything else is done by the drivers themselfs. */
|
||||
jz_gpio_disable_pullup(GPIO_SD_CD_N);
|
||||
}
|
||||
|
||||
static int __init sakc_init_platform_devices(void)
|
||||
{
|
||||
jz4740_framebuffer_device.dev.platform_data = &sakc_fb_pdata;
|
||||
jz4740_nand_device.dev.platform_data = &sakc_nand_pdata;
|
||||
jz4740_mmc_device.dev.platform_data = &sakc_mmc_pdata;
|
||||
|
||||
spi_register_board_info(sakc_spi_board_info,
|
||||
ARRAY_SIZE(sakc_spi_board_info));
|
||||
|
||||
return platform_add_devices(jz_platform_devices,
|
||||
ARRAY_SIZE(jz_platform_devices));
|
||||
|
||||
}
|
||||
extern int jz_gpiolib_init(void);
|
||||
extern int jz_init_clocks(unsigned long extal);
|
||||
|
||||
static __init int board_sakc(char *str)
|
||||
{
|
||||
sakc_mmc_pdata.card_detect_active_low = 1;
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
__setup("sakc", board_sakc);
|
||||
|
||||
static int __init sakc_board_setup(void)
|
||||
{
|
||||
printk("Qi Hardware JZ4725 SAKC setup\n");
|
||||
if (jz_gpiolib_init())
|
||||
panic("Failed to initalize jz gpio\n");
|
||||
jz_init_clocks(12000000);
|
||||
|
||||
board_gpio_setup();
|
||||
|
||||
if (sakc_init_platform_devices())
|
||||
panic("Failed to initalize platform devices\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
arch_initcall(sakc_board_setup);
|
||||
29
linux-2.6.32.7_sakc/sound/soc/jz4740/Kconfig
Normal file
29
linux-2.6.32.7_sakc/sound/soc/jz4740/Kconfig
Normal file
@ -0,0 +1,29 @@
|
||||
config SND_JZ4740_SOC
|
||||
tristate "SoC Audio for Ingenic JZ4740 SoC"
|
||||
depends on SOC_JZ4740 && SND_SOC
|
||||
help
|
||||
Say Y or M if you want to add support for codecs attached to
|
||||
the Jz4740 AC97, I2S or SSP interface. You will also need
|
||||
to select the audio interfaces to support below.
|
||||
|
||||
config SND_JZ4740_SOC_QI_LB60
|
||||
tristate "SoC Audio support for Qi Hardware Ben Nanonote"
|
||||
depends on SND_JZ4740_SOC && JZ4740_QI_LB60
|
||||
select SND_JZ4740_SOC_I2S
|
||||
select SND_SOC_JZCODEC
|
||||
help
|
||||
Say Y if you want to add support for SoC audio of internal codec on Ingenic Jz4740 QI_LB60 board.
|
||||
|
||||
config SND_JZ4740_SOC_N526
|
||||
tristate "SoC Audio support for Hanvon N526 eBook reader"
|
||||
depends on SND_JZ4740_SOC && JZ4740_N526
|
||||
select SND_JZ4740_SOC_I2S
|
||||
select SND_SOC_JZCODEC
|
||||
help
|
||||
Say Y if you want to enable support for SoC audio on the Hanvon N526.
|
||||
|
||||
config SND_JZ4740_SOC_I2S
|
||||
depends on SND_JZ4740_SOC
|
||||
tristate "SoC Audio (I2S protocol) for Ingenic jz4740 chip"
|
||||
help
|
||||
Say Y if you want to use I2S protocol and I2S codec on Ingenic Jz4740 QI_LB60 board.
|
||||
Loading…
Reference in New Issue
Block a user