openwrt-xburst/target/linux/ar71xx/base-files/etc/defconfig/ap96/network

config interface loopback
	option ifname	lo
	option proto	static
	option ipaddr	127.0.0.1
	option netmask	255.0.0.0

config interface lan
	option ifname	eth0
	option type	bridge
	option proto	static
	option ipaddr	192.168.1.1
	option netmask	255.255.255.0

config interface wan
	option ifname	eth1
	option proto	dhcp

config switch
	option name	eth0
	option reset	1
	option enable_vlan 1

config switch_vlan
	option device	eth0
	option vlan	1
	option ports	"0 1 2 3 4"
Add support for Atheros AP96 reference board This is still preliminary and not really tested much. Anyway, this version seems to be enough to get both wired and wireless interfaces working. Buttons and leds are also working. mach-ap96.c is based on mach-wndr3700.c. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73 2010-09-27 11:59:53 +03:00			`config interface loopback`
			`option ifname lo`
			`option proto static`
			`option ipaddr 127.0.0.1`
			`option netmask 255.0.0.0`

			`config interface lan`
			`option ifname eth0`
			`option type bridge`
			`option proto static`
			`option ipaddr 192.168.1.1`
			`option netmask 255.255.255.0`

			`config interface wan`
			`option ifname eth1`
			`option proto dhcp`
ar71xx: add default configuration for the switch on AP96 Enables forwarding of frames between the switch ports (eth0). Patch by Jouni Malinen git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26180 3c298f89-4303-0410-b956-a3cf2f4a3e73 2011-03-15 21:51:42 +02:00
			`config switch`
			`option name eth0`
			`option reset 1`
			`option enable_vlan 1`

			`config switch_vlan`
			`option device eth0`
			`option vlan 1`
			`option ports "0 1 2 3 4"`