mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-07-07 20:31:10 +03:00
Add support for Atheros AP96 reference board
This is still preliminary and not really tested much. Anyway, this version seems to be enough to get both wired and wireless interfaces working. Buttons and leds are also working. mach-ap96.c is based on mach-wndr3700.c. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
nbd
parent
67ffd14387
commit
4fa1e52b3a
16
target/linux/ar71xx/base-files/etc/defconfig/ap96/network
Normal file
16
target/linux/ar71xx/base-files/etc/defconfig/ap96/network
Normal file
|
|
@ -0,0 +1,16 @@
|
|||
config interface loopback
|
||||
option ifname lo
|
||||
option proto static
|
||||
option ipaddr 127.0.0.1
|
||||
option netmask 255.0.0.0
|
||||
|
||||
config interface lan
|
||||
option ifname eth0
|
||||
option type bridge
|
||||
option proto static
|
||||
option ipaddr 192.168.1.1
|
||||
option netmask 255.255.255.0
|
||||
|
||||
config interface wan
|
||||
option ifname eth1
|
||||
option proto dhcp
|
||||
|
|
@ -36,6 +36,9 @@ get_status_led() {
|
|||
ap83)
|
||||
status_led="ap83:green:power"
|
||||
;;
|
||||
ap96)
|
||||
status_led="ap96:green:led2"
|
||||
;;
|
||||
aw-nr580)
|
||||
status_led="aw-nr580:green:ready"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -16,6 +16,9 @@ ar71xx_board_name() {
|
|||
*AP83)
|
||||
name="ap83"
|
||||
;;
|
||||
*AP96)
|
||||
name="ap96"
|
||||
;;
|
||||
*AW-NR580)
|
||||
name="aw-nr580"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -19,6 +19,7 @@ CONFIG_AR71XX_DEV_PB9X_PCI=y
|
|||
CONFIG_AR71XX_DEV_USB=y
|
||||
CONFIG_AR71XX_MACH_AP81=y
|
||||
CONFIG_AR71XX_MACH_AP83=y
|
||||
CONFIG_AR71XX_MACH_AP96=y
|
||||
CONFIG_AR71XX_MACH_AW_NR580=y
|
||||
CONFIG_AR71XX_MACH_DIR_600_A1=y
|
||||
CONFIG_AR71XX_MACH_DIR_615_C1=y
|
||||
|
|
|
|||
|
|
@ -19,6 +19,7 @@ CONFIG_AR71XX_DEV_PB9X_PCI=y
|
|||
CONFIG_AR71XX_DEV_USB=y
|
||||
CONFIG_AR71XX_MACH_AP81=y
|
||||
CONFIG_AR71XX_MACH_AP83=y
|
||||
CONFIG_AR71XX_MACH_AP96=y
|
||||
CONFIG_AR71XX_MACH_AW_NR580=y
|
||||
CONFIG_AR71XX_MACH_DIR_600_A1=y
|
||||
CONFIG_AR71XX_MACH_DIR_615_C1=y
|
||||
|
|
|
|||
|
|
@ -19,6 +19,7 @@ CONFIG_AR71XX_DEV_PB9X_PCI=y
|
|||
CONFIG_AR71XX_DEV_USB=y
|
||||
CONFIG_AR71XX_MACH_AP81=y
|
||||
CONFIG_AR71XX_MACH_AP83=y
|
||||
CONFIG_AR71XX_MACH_AP96=y
|
||||
CONFIG_AR71XX_MACH_AW_NR580=y
|
||||
CONFIG_AR71XX_MACH_DIR_600_A1=y
|
||||
CONFIG_AR71XX_MACH_DIR_615_C1=y
|
||||
|
|
|
|||
|
|
@ -19,6 +19,7 @@ CONFIG_AR71XX_DEV_PB9X_PCI=y
|
|||
CONFIG_AR71XX_DEV_USB=y
|
||||
CONFIG_AR71XX_MACH_AP81=y
|
||||
CONFIG_AR71XX_MACH_AP83=y
|
||||
CONFIG_AR71XX_MACH_AP96=y
|
||||
CONFIG_AR71XX_MACH_AW_NR580=y
|
||||
CONFIG_AR71XX_MACH_DIR_600_A1=y
|
||||
CONFIG_AR71XX_MACH_DIR_615_C1=y
|
||||
|
|
|
|||
|
|
@ -19,6 +19,15 @@ config AR71XX_MACH_AP83
|
|||
select AR71XX_DEV_USB
|
||||
default n
|
||||
|
||||
config AR71XX_MACH_AP96
|
||||
bool "Atheros AP96 board support"
|
||||
select AR71XX_DEV_M25P80
|
||||
select AR71XX_DEV_AP94_PCI if PCI
|
||||
select AR71XX_DEV_GPIO_BUTTONS
|
||||
select AR71XX_DEV_LEDS_GPIO
|
||||
select AR71XX_DEV_USB
|
||||
default n
|
||||
|
||||
config AR71XX_MACH_DIR_600_A1
|
||||
bool "D-Link DIR-600 rev. A1 support"
|
||||
select AR71XX_DEV_AP91_ETH
|
||||
|
|
|
|||
|
|
@ -29,6 +29,7 @@ obj-$(CONFIG_AR71XX_NVRAM) += nvram.o
|
|||
|
||||
obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o
|
||||
obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o
|
||||
obj-$(CONFIG_AR71XX_MACH_AP96) += mach-ap96.o
|
||||
obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o
|
||||
obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o
|
||||
obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o
|
||||
|
|
|
|||
175
target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap96.c
Normal file
175
target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap96.c
Normal file
|
|
@ -0,0 +1,175 @@
|
|||
/*
|
||||
* Atheros AP96 board support
|
||||
*
|
||||
* Copyright (C) 2009 Marco Porsch
|
||||
* Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
|
||||
* Copyright (C) 2010 Atheros Communications
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#include <asm/mach-ar71xx/ar71xx.h>
|
||||
|
||||
#include "machtype.h"
|
||||
#include "devices.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-ap94-pci.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-usb.h"
|
||||
|
||||
#define AP96_GPIO_LED_12_GREEN 0
|
||||
#define AP96_GPIO_LED_3_GREEN 1
|
||||
#define AP96_GPIO_LED_2_GREEN 2
|
||||
#define AP96_GPIO_LED_WPS_GREEN 4
|
||||
#define AP96_GPIO_LED_5_GREEN 5
|
||||
#define AP96_GPIO_LED_4_ORANGE 6
|
||||
|
||||
/* Reset button - next to the power connector */
|
||||
#define AP96_GPIO_BTN_RESET 3
|
||||
/* WPS button - next to a led on right */
|
||||
#define AP96_GPIO_BTN_WPS 8
|
||||
|
||||
#define AP96_BUTTONS_POLL_INTERVAL 20
|
||||
|
||||
#define AP96_WMAC0_MAC_OFFSET 0x120c
|
||||
#define AP96_WMAC1_MAC_OFFSET 0x520c
|
||||
#define AP96_CALDATA0_OFFSET 0x1000
|
||||
#define AP96_CALDATA1_OFFSET 0x5000
|
||||
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
static struct mtd_partition ap96_partitions[] = {
|
||||
{
|
||||
.name = "uboot",
|
||||
.offset = 0,
|
||||
.size = 0x030000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
} , {
|
||||
.name = "env",
|
||||
.offset = 0x030000,
|
||||
.size = 0x010000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
} , {
|
||||
.name = "rootfs",
|
||||
.offset = 0x040000,
|
||||
.size = 0x600000,
|
||||
} , {
|
||||
.name = "uImage",
|
||||
.offset = 0x640000,
|
||||
.size = 0x1b0000,
|
||||
} , {
|
||||
.name = "caldata",
|
||||
.offset = 0x7f0000,
|
||||
.size = 0x010000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}
|
||||
};
|
||||
#endif /* CONFIG_MTD_PARTITIONS */
|
||||
|
||||
static struct flash_platform_data ap96_flash_data = {
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
.parts = ap96_partitions,
|
||||
.nr_parts = ARRAY_SIZE(ap96_partitions),
|
||||
#endif
|
||||
};
|
||||
|
||||
/*
|
||||
* AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12
|
||||
* below (from left to right on the board). Led 1 seems to be on whenever the
|
||||
* board is powered. Led 11 shows LAN link activity actity. Led 3 is orange;
|
||||
* others are green.
|
||||
*
|
||||
* In addition, there is one led next to a button on the right side for WPS.
|
||||
*/
|
||||
static struct gpio_led ap96_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "ap96:green:led2",
|
||||
.gpio = AP96_GPIO_LED_2_GREEN,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "ap96:green:led3",
|
||||
.gpio = AP96_GPIO_LED_3_GREEN,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "ap96:orange:led4",
|
||||
.gpio = AP96_GPIO_LED_4_ORANGE,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "ap96:green:led5",
|
||||
.gpio = AP96_GPIO_LED_5_GREEN,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "ap96:green:led12",
|
||||
.gpio = AP96_GPIO_LED_12_GREEN,
|
||||
.active_low = 1,
|
||||
}, { /* next to a button on right */
|
||||
.name = "ap96:green:wps",
|
||||
.gpio = AP96_GPIO_LED_WPS_GREEN,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_button ap96_gpio_buttons[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.threshold = 3,
|
||||
.gpio = AP96_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.desc = "wps",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.threshold = 3,
|
||||
.gpio = AP96_GPIO_BTN_WPS,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static void __init ap96_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
|
||||
ar71xx_add_device_mdio(0xfffffffe);
|
||||
|
||||
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art, 0);
|
||||
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ar71xx_eth0_data.phy_mask = 0x1;
|
||||
|
||||
ar71xx_add_device_eth(0);
|
||||
|
||||
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art, 1);
|
||||
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ar71xx_eth1_data.speed = SPEED_1000;
|
||||
ar71xx_eth1_data.duplex = DUPLEX_FULL;
|
||||
|
||||
ar71xx_eth1_pll_data.pll_1000 = 0x1f000000;
|
||||
|
||||
ar71xx_add_device_eth(1);
|
||||
|
||||
ar71xx_add_device_usb();
|
||||
|
||||
ar71xx_add_device_m25p80(&ap96_flash_data);
|
||||
|
||||
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio),
|
||||
ap96_leds_gpio);
|
||||
|
||||
ar71xx_add_device_gpio_buttons(-1, AP96_BUTTONS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(ap96_gpio_buttons),
|
||||
ap96_gpio_buttons);
|
||||
|
||||
ap94_pci_init(art + AP96_CALDATA0_OFFSET,
|
||||
art + AP96_WMAC0_MAC_OFFSET,
|
||||
art + AP96_CALDATA1_OFFSET,
|
||||
art + AP96_WMAC1_MAC_OFFSET);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(AR71XX_MACH_AP96, "AP96", "Atheros AP96", ap96_setup);
|
||||
|
|
@ -58,6 +58,7 @@ enum ar71xx_mach_type {
|
|||
AR71XX_MACH_EAP7660D, /* Senao EAP7660D */
|
||||
AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
|
||||
AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */
|
||||
AR71XX_MACH_AP96, /* Atheros AP96 */
|
||||
};
|
||||
|
||||
#endif /* _AR71XX_MACHTYPE_H */
|
||||
|
|
|
|||
|
|
@ -28,6 +28,17 @@ endef
|
|||
|
||||
$(eval $(call Profile,AP83))
|
||||
|
||||
define Profile/AP96
|
||||
NAME:=Atheros AP96 reference board
|
||||
PACKAGES:=wpad-mini kmod-ath9k kmod-usb-core kmod-usb2
|
||||
endef
|
||||
|
||||
define Profile/AP96/Description
|
||||
Package set optimized for the Atheros AP96 reference board.
|
||||
endef
|
||||
|
||||
$(eval $(call Profile,AP96))
|
||||
|
||||
define Profile/PB42
|
||||
NAME:=Atheros PB42 reference board
|
||||
PACKAGES:=wpad-mini kmod-ath9k kmod-usb-core kmod-usb-ohci kmod-usb2
|
||||
|
|
|
|||
|
|
@ -571,6 +571,10 @@ define Image/Build/Profile/WNDR3700
|
|||
$(call Image/Build/Template/$(fs_64k)/$(1),WNDR3700,wndr3700,board=WNDR3700)
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/AP96
|
||||
$(call Image/Build/Template/$(fs_64k)/$(1),AP83,ap96,board=AP96)
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/WRT400N
|
||||
$(call Image/Build/Template/$(fs_64k)/$(1),WRT400N,wrt400n,board=WRT400N)
|
||||
endef
|
||||
|
|
@ -623,6 +627,7 @@ define Image/Build/Profile/Default
|
|||
$(call Image/Build/Profile/UBNT,$(1))
|
||||
$(call Image/Build/Profile/WP543,$(1))
|
||||
$(call Image/Build/Profile/WNDR3700,$(1))
|
||||
$(call Image/Build/Profile/AP96,$(1))
|
||||
$(call Image/Build/Profile/WRT400N,$(1))
|
||||
$(call Image/Build/Profile/WRT160NL,$(1))
|
||||
$(call Image/Build/Profile/WZRHPG300NH,$(1))
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user