openwrt-xburst/target/linux/ar71xx/base-files/etc/defconfig/dir-825-b1/network

config interface loopback
	option ifname	lo
	option proto	static
	option ipaddr	127.0.0.1
	option netmask	255.0.0.0

config interface lan
	option ifname	eth0
	option type	bridge
	option proto	static
	option ipaddr	192.168.1.1
	option netmask	255.255.255.0

config interface wan
	option ifname	eth1
	option proto	dhcp

config switch
	option name	rtl8366-smi
	option reset	1
	option enable_vlan 1

config switch_vlan
	option device	rtl8366-smi
	option vlan 	0
	option ports	"0 1 2 3 5"
ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to ValXdater) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18621 3c298f89-4303-0410-b956-a3cf2f4a3e73 2009-12-03 15:07:34 +00:00			`config interface loopback`
			`option ifname lo`
			`option proto static`
			`option ipaddr 127.0.0.1`
			`option netmask 255.0.0.0`

			`config interface lan`
			`option ifname eth0`
			`option type bridge`
			`option proto static`
			`option ipaddr 192.168.1.1`
			`option netmask 255.255.255.0`

			`config interface wan`
			`option ifname eth1`
			`option proto dhcp`
ar71xx: update default network configuration for the WNDR3700/DIR-825-B1 Also drop the default network configuration of the TL-WR1043ND, because the RTL8366RB switch is not yet supported by the rtl8366-smi driver. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19217 3c298f89-4303-0410-b956-a3cf2f4a3e73 2010-01-18 09:01:47 +00:00
			`config switch`
			`option name rtl8366-smi`
			`option reset 1`
			`option enable_vlan 1`

			`config switch_vlan`
			`option device rtl8366-smi`
			`option vlan 0`
			`option ports "0 1 2 3 5"`