mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-25 03:13:20 +02:00
ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to
ValXdater) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18621 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
parent
9152c5c793
commit
9e412c9b2e
@ -0,0 +1,16 @@
|
||||
config interface loopback
|
||||
option ifname lo
|
||||
option proto static
|
||||
option ipaddr 127.0.0.1
|
||||
option netmask 255.0.0.0
|
||||
|
||||
config interface lan
|
||||
option ifname eth0
|
||||
option type bridge
|
||||
option proto static
|
||||
option ipaddr 192.168.1.1
|
||||
option netmask 255.255.255.0
|
||||
|
||||
config interface wan
|
||||
option ifname eth1
|
||||
option proto dhcp
|
@ -42,6 +42,9 @@ get_status_led() {
|
||||
bullet-m | rocket-m | nano-m)
|
||||
status_led="ubnt:green:link4"
|
||||
;;
|
||||
dir825b1)
|
||||
status_led="dir825b1:orange:power"
|
||||
;;
|
||||
ls-sr71)
|
||||
status_led="ubnt:green:d22"
|
||||
;;
|
||||
|
@ -19,6 +19,9 @@ ar71xx_board_name() {
|
||||
*AW-NR580)
|
||||
name="aw-nr580"
|
||||
;;
|
||||
*DIR825B1)
|
||||
name="dir825b1"
|
||||
;;
|
||||
*"Bullet M")
|
||||
name="bullet-m"
|
||||
;;
|
||||
|
@ -68,7 +68,7 @@ platform_check_image() {
|
||||
[ "$ARGC" -gt 1 ] && return 1
|
||||
|
||||
case "$board" in
|
||||
ap83 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m)
|
||||
ap83 | dir825b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m)
|
||||
[ "$magic" != "2705" ] && {
|
||||
echo "Invalid image type."
|
||||
return 1
|
||||
|
@ -6,6 +6,7 @@ CONFIG_AG71XX=y
|
||||
CONFIG_AR71XX_MACH_AP81=y
|
||||
CONFIG_AR71XX_MACH_AP83=y
|
||||
CONFIG_AR71XX_MACH_AW_NR580=y
|
||||
CONFIG_AR71XX_MACH_DIR825B1=y
|
||||
CONFIG_AR71XX_MACH_GENERIC=y
|
||||
CONFIG_AR71XX_MACH_MZK_W04NU=y
|
||||
CONFIG_AR71XX_MACH_MZK_W300NH=y
|
||||
|
@ -7,6 +7,7 @@ CONFIG_AG71XX=y
|
||||
CONFIG_AR71XX_MACH_AP81=y
|
||||
CONFIG_AR71XX_MACH_AP83=y
|
||||
CONFIG_AR71XX_MACH_AW_NR580=y
|
||||
CONFIG_AR71XX_MACH_DIR825B1=y
|
||||
CONFIG_AR71XX_MACH_GENERIC=y
|
||||
CONFIG_AR71XX_MACH_MZK_W04NU=y
|
||||
CONFIG_AR71XX_MACH_MZK_W300NH=y
|
||||
|
@ -10,6 +10,10 @@ config AR71XX_MACH_AP83
|
||||
bool "Atheros AP83 board support"
|
||||
default y
|
||||
|
||||
config AR71XX_MACH_DIR825B1
|
||||
bool "D-Link DIR-825 rev. B1 board support"
|
||||
default y
|
||||
|
||||
config AR71XX_MACH_PB42
|
||||
bool "Atheros PB42 board support"
|
||||
default y
|
||||
|
@ -16,6 +16,7 @@ obj-$(CONFIG_PCI) += pci.o
|
||||
obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o
|
||||
obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o
|
||||
obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o
|
||||
obj-$(CONFIG_AR71XX_MACH_DIR825B1) += mach-dir825b1.o
|
||||
obj-$(CONFIG_AR71XX_MACH_GENERIC) += mach-generic.o
|
||||
obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o
|
||||
obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o
|
||||
|
317
target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c
Normal file
317
target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c
Normal file
@ -0,0 +1,317 @@
|
||||
/*
|
||||
* D-Link DIR-825 rev. B1 board support
|
||||
*
|
||||
* Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o.
|
||||
*
|
||||
* based on mach-wndr3700.c
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/flash.h>
|
||||
#include <linux/input.h>
|
||||
|
||||
#include <asm/mips_machine.h>
|
||||
#include <asm/mach-ar71xx/ar71xx.h>
|
||||
#include <asm/mach-ar71xx/pci.h>
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#include "devices.h"
|
||||
|
||||
|
||||
#define DIR825B1_GPIO_LED_BLUE_USB 0
|
||||
#define DIR825B1_GPIO_LED_ORANGE_POWER 1
|
||||
#define DIR825B1_GPIO_LED_BLUE_POWER 2
|
||||
#define DIR825B1_GPIO_LED_BLUE_POWERSAVE 4
|
||||
#define DIR825B1_GPIO_LED_ORANGE_PLANET 6
|
||||
#define DIR825B1_GPIO_LED_BLUE_PLANET 11
|
||||
|
||||
#define DIR825B1_GPIO_BTN_RESET 3
|
||||
#define DIR825B1_GPIO_BTN_POWERSAVE 8
|
||||
|
||||
#define DIR825B1_BUTTONS_POLL_INTERVAL 20
|
||||
|
||||
|
||||
#define DIR825B1_CAL_LOCATION_0 0xbf661000
|
||||
#define DIR825B1_CAL_LOCATION_1 0xbf665000
|
||||
|
||||
#define DIR825B1_MAC_LOCATION_0 0x2ffa81b8
|
||||
#define DIR825B1_MAC_LOCATION_1 0x2ffa8370
|
||||
|
||||
|
||||
static struct ath9k_platform_data dir825b1_wmac0_data;
|
||||
static struct ath9k_platform_data dir825b1_wmac1_data;
|
||||
static char dir825b1_wmac0_mac[6];
|
||||
static char dir825b1_wmac1_mac[6];
|
||||
|
||||
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
static struct mtd_partition dir825b1_partitions[] = {
|
||||
{
|
||||
.name = "uboot",
|
||||
.offset = 0,
|
||||
.size = 0x040000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
} , {
|
||||
.name = "config",
|
||||
.offset = 0x040000,
|
||||
.size = 0x010000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
} , {
|
||||
.name = "firmware",
|
||||
.offset = 0x050000,
|
||||
.size = 0x610000,
|
||||
} , {
|
||||
.name = "caldata",
|
||||
.offset = 0x660000,
|
||||
.size = 0x010000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}
|
||||
};
|
||||
#endif /* CONFIG_MTD_PARTITIONS */
|
||||
|
||||
|
||||
static struct flash_platform_data dir825b1_flash_data = {
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
.parts = dir825b1_partitions,
|
||||
.nr_parts = ARRAY_SIZE(dir825b1_partitions),
|
||||
#endif
|
||||
};
|
||||
|
||||
|
||||
static struct spi_board_info dir825b1_spi_info[] = {
|
||||
{
|
||||
.bus_num = 0,
|
||||
.chip_select = 0,
|
||||
.max_speed_hz = 25000000,
|
||||
.modalias = "m25p80",
|
||||
.platform_data = &dir825b1_flash_data,
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
static struct gpio_led dir825b1_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "dir825b1:blue:usb",
|
||||
.gpio = DIR825B1_GPIO_LED_BLUE_USB,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "dir825b1:orange:power",
|
||||
.gpio = DIR825B1_GPIO_LED_ORANGE_POWER,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "dir825b1:blue:power",
|
||||
.gpio = DIR825B1_GPIO_LED_BLUE_POWER,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "dir825b1:blue:powersave",
|
||||
.gpio = DIR825B1_GPIO_LED_BLUE_POWERSAVE,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "dir825b1:orange:planet",
|
||||
.gpio = DIR825B1_GPIO_LED_ORANGE_PLANET,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "dir825b1:blue:planet",
|
||||
.gpio = DIR825B1_GPIO_LED_BLUE_PLANET,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
static struct gpio_button dir825b1_gpio_buttons[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = BTN_0,
|
||||
.threshold = 5,
|
||||
.gpio = DIR825B1_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
} , {
|
||||
.desc = "powersave",
|
||||
.type = EV_KEY,
|
||||
.code = BTN_1,
|
||||
.threshold = 5,
|
||||
.gpio = DIR825B1_GPIO_BTN_POWERSAVE,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
static struct ar71xx_pci_irq dir825b1_pci_irqs[] __initdata = {
|
||||
{
|
||||
.slot = 0,
|
||||
.pin = 1,
|
||||
.irq = AR71XX_PCI_IRQ_DEV0,
|
||||
}, {
|
||||
.slot = 1,
|
||||
.pin = 1,
|
||||
.irq = AR71XX_PCI_IRQ_DEV1,
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
static int dir825b1_pci_plat_dev_init(struct pci_dev *dev)
|
||||
{
|
||||
switch(PCI_SLOT(dev->devfn))
|
||||
{
|
||||
case 17:
|
||||
dev->dev.platform_data = &dir825b1_wmac0_data;
|
||||
break;
|
||||
|
||||
case 18:
|
||||
dev->dev.platform_data = &dir825b1_wmac1_data;
|
||||
break;
|
||||
}
|
||||
|
||||
return(0);
|
||||
}
|
||||
|
||||
|
||||
static void dir825b1_pci_fixup(struct pci_dev *dev)
|
||||
{
|
||||
void __iomem *mem;
|
||||
u16 *cal_data;
|
||||
u16 cmd;
|
||||
u32 bar0;
|
||||
u32 val;
|
||||
|
||||
if (ar71xx_mach != AR71XX_MACH_DIR825B1) return;
|
||||
|
||||
dir825b1_pci_plat_dev_init(dev);
|
||||
cal_data = dev->dev.platform_data;
|
||||
|
||||
if (*cal_data != 0xa55a)
|
||||
{
|
||||
printk(KERN_ERR "PCI: no calibration data found for %s\n",
|
||||
pci_name(dev));
|
||||
return;
|
||||
}
|
||||
|
||||
mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
|
||||
if (!mem)
|
||||
{
|
||||
printk(KERN_ERR "PCI: ioremap error for device %s\n",
|
||||
pci_name(dev));
|
||||
return;
|
||||
}
|
||||
|
||||
printk(KERN_INFO "PCI: fixup device %s\n", pci_name(dev));
|
||||
|
||||
pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
|
||||
|
||||
/* Setup the PCI device to allow access to the internal registers */
|
||||
pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, AR71XX_PCI_MEM_BASE);
|
||||
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
||||
cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
||||
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
||||
|
||||
/* set pointer to first reg address */
|
||||
cal_data += 3;
|
||||
while (*cal_data != 0xffff)
|
||||
{
|
||||
u32 reg;
|
||||
reg = *cal_data++;
|
||||
val = *cal_data++;
|
||||
val |= (*cal_data++) << 16;
|
||||
|
||||
__raw_writel(val, mem + reg);
|
||||
udelay(100);
|
||||
}
|
||||
|
||||
pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
|
||||
dev->vendor = val & 0xffff;
|
||||
dev->device = (val >> 16) & 0xffff;
|
||||
|
||||
pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
|
||||
dev->revision = val & 0xff;
|
||||
dev->class = val >> 8; /* upper 3 bytes */
|
||||
|
||||
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
||||
cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
|
||||
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
||||
|
||||
pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
|
||||
|
||||
iounmap(mem);
|
||||
}
|
||||
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID,
|
||||
dir825b1_pci_fixup);
|
||||
|
||||
|
||||
static void __init dir825b1_pci_init(void)
|
||||
{
|
||||
memcpy(dir825b1_wmac0_data.eeprom_data,
|
||||
(u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0),
|
||||
sizeof(dir825b1_wmac0_data.eeprom_data));
|
||||
|
||||
memcpy(dir825b1_wmac1_data.eeprom_data,
|
||||
(u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1),
|
||||
sizeof(dir825b1_wmac1_data.eeprom_data));
|
||||
|
||||
memcpy(dir825b1_wmac0_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_0), 6);
|
||||
dir825b1_wmac0_data.macaddr = dir825b1_wmac0_mac;
|
||||
memcpy(dir825b1_wmac1_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6);
|
||||
dir825b1_wmac1_data.macaddr = dir825b1_wmac1_mac;
|
||||
|
||||
ar71xx_pci_plat_dev_init = dir825b1_pci_plat_dev_init;
|
||||
ar71xx_pci_init(ARRAY_SIZE(dir825b1_pci_irqs), dir825b1_pci_irqs);
|
||||
}
|
||||
#else
|
||||
static void __init dir825b1_pci_init(void) { }
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
|
||||
static void __init dir825b1_setup(void)
|
||||
{
|
||||
u8 mac[6], i;
|
||||
|
||||
memcpy(mac, (u8*)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6);
|
||||
for(i = 5; i >= 3; i--)
|
||||
if(++mac[i] != 0x00) break;
|
||||
|
||||
ar71xx_set_mac_base(mac);
|
||||
|
||||
ar71xx_add_device_mdio(0x0);
|
||||
|
||||
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ar71xx_eth0_data.phy_mask = 0x1E;
|
||||
ar71xx_eth0_data.speed = SPEED_1000;
|
||||
ar71xx_eth0_data.duplex = DUPLEX_FULL;
|
||||
ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
|
||||
|
||||
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ar71xx_eth1_data.phy_mask = 0xC0;
|
||||
ar71xx_eth1_data.speed = SPEED_1000;
|
||||
ar71xx_eth1_data.duplex = DUPLEX_FULL;
|
||||
ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
|
||||
|
||||
ar71xx_add_device_eth(0);
|
||||
ar71xx_add_device_eth(1);
|
||||
|
||||
ar71xx_add_device_spi(NULL, dir825b1_spi_info,
|
||||
ARRAY_SIZE(dir825b1_spi_info));
|
||||
|
||||
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
|
||||
dir825b1_leds_gpio);
|
||||
|
||||
ar71xx_add_device_gpio_buttons(-1, DIR825B1_BUTTONS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(dir825b1_gpio_buttons),
|
||||
dir825b1_gpio_buttons);
|
||||
|
||||
ar71xx_add_device_usb();
|
||||
|
||||
dir825b1_pci_init();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(AR71XX_MACH_DIR825B1, "D-Link DIR825B1", dir825b1_setup);
|
@ -58,6 +58,9 @@ static struct board_rec boards[] __initdata = {
|
||||
}, {
|
||||
.name = "AW-NR580",
|
||||
.mach_type = AR71XX_MACH_AW_NR580,
|
||||
}, {
|
||||
.name = "DIR825B1",
|
||||
.mach_type = AR71XX_MACH_DIR825B1,
|
||||
}, {
|
||||
.name = "TEW-632BRP",
|
||||
.mach_type = AR71XX_MACH_TEW_632BRP,
|
||||
|
@ -124,6 +124,7 @@ enum ar71xx_mach_type {
|
||||
AR71XX_MACH_AP81, /* Atheros AP81 */
|
||||
AR71XX_MACH_AP83, /* Atheros AP83 */
|
||||
AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */
|
||||
AR71XX_MACH_DIR825B1, /* D-Link DIR-825 rev. B1 */
|
||||
AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
|
||||
AR71XX_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
|
||||
AR71XX_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
|
||||
|
@ -77,6 +77,23 @@ define Image/Build/WRT400N
|
||||
fi; fi
|
||||
endef
|
||||
|
||||
dir825b1_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,1024k(kernel),5184k(rootfs),64k(caldata)ro,6208k@0x50000(firmware)
|
||||
define Image/Build/DIR825B1
|
||||
$(call PatchKernelLzma,$(2),$(3) $(dir825b1_mtdlayout))
|
||||
$(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(call imgname,$(1),$(2)).bin)
|
||||
if [ `stat -c%s "$(call imgname,$(1),$(2)).bin"` -gt 1048576 ]; then \
|
||||
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
|
||||
rm -f $(call imgname,$(1),$(2)).bin; \
|
||||
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 5308416 ]; then \
|
||||
echo "Warning: $(KDIR)/root.$(1) is too big"; \
|
||||
rm -f $(call imgname,$(1),$(2)).bin; \
|
||||
else \
|
||||
dd if=$(KDIR)/root.$(1) of=$(call imgname,$(1),$(2)).bin bs=1k seek=1024; \
|
||||
cp $(call imgname,$(1),$(2)).bin $(call imgname,$(1),$(2))-backup-loader.bin; \
|
||||
echo -n "01AP94-AR7161-RT-080619-00" >> $(call imgname,$(1),$(2))-backup-loader.bin; \
|
||||
fi; fi
|
||||
endef
|
||||
|
||||
cameo_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,896k(kernel),2880k(rootfs),64k(art)ro,3776k@0x30000(firmware)
|
||||
define Image/Build/Cameo
|
||||
$(call PatchKernelLzma,$(2),$(3) $(cameo_mtdlayout))
|
||||
@ -268,6 +285,18 @@ define Image/Build/Template/WRT400N/jffs2-64k
|
||||
$(call Image/Build/Template/WRT400N,jffs2-64k,$(1),$(2),$(3))
|
||||
endef
|
||||
|
||||
define Image/Build/Template/DIR825B1
|
||||
$(call Image/Build/DIR825B1,$(1),$(2),$(3),$(4))
|
||||
endef
|
||||
|
||||
define Image/Build/Template/DIR825B1/squashfs
|
||||
$(call Image/Build/Template/DIR825B1,squashfs,$(1),$(2),$(3))
|
||||
endef
|
||||
|
||||
define Image/Build/Template/DIR825B1/jffs2-64k
|
||||
$(call Image/Build/Template/DIR825B1,jffs2-64k,$(1),$(2),$(3))
|
||||
endef
|
||||
|
||||
define Image/Build/Template/CyberTAN
|
||||
$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4))
|
||||
endef
|
||||
@ -453,6 +482,10 @@ define Image/Build/Profile/WRT400N
|
||||
$(call Image/Build/Template/WRT400N/$(1),wrt400n,board=WRT400N)
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/DIR825B1
|
||||
$(call Image/Build/Template/DIR825B1/$(1),dir825b1,board=DIR825B1)
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/WRT160NL
|
||||
$(call Image/Build/Template/CyberTAN/$(1),wrt160nl,board=WRT160NL,1.00.01)
|
||||
endef
|
||||
@ -461,6 +494,7 @@ define Image/Build/Profile/Default
|
||||
$(call Image/Build/Profile/AP83,$(1))
|
||||
$(call Image/Build/Profile/A02RBW300N,$(1))
|
||||
$(call Image/Build/Profile/DIR615C1,$(1))
|
||||
$(call Image/Build/Profile/DIR825B1,$(1))
|
||||
$(call Image/Build/Profile/MZKW04NU,$(1))
|
||||
$(call Image/Build/Profile/MZKW300NH,$(1))
|
||||
$(call Image/Build/Profile/TEW632BRP,$(1))
|
||||
|
@ -15,3 +15,15 @@ define Profile/DIR615C1/Description
|
||||
endef
|
||||
|
||||
$(eval $(call Profile,DIR615C1))
|
||||
|
||||
|
||||
define Profile/DIR825B1
|
||||
NAME:=D-Link DIR-825 rev. B1
|
||||
PACKAGES:=kmod-ath9k hostapd-mini
|
||||
endef
|
||||
|
||||
define Profile/DIR825B1/Description
|
||||
Package set optimized for the D-Link DIR-825 rev. B1.
|
||||
endef
|
||||
|
||||
$(eval $(call Profile,DIR825B1))
|
||||
|
Loading…
Reference in New Issue
Block a user