qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-31 00:52:05 +02:00
Code
efe78d1eeb
openwrt-xburst/target/linux/ar71xx/base-files/etc/uci-defaults/leds

241 lines
5.5 KiB
Plaintext
Raw Normal View History

ar71xx: combine LEDs setup in one file git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 13:20:49 +02:00
#!/bin/sh
#
# Copyright (C) 2011 OpenWrt.org
#
COMMIT_SYSTEM=0
set_led_netdev() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local dev=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='netdev'
set system.$cfg.dev='$dev'
set system.$cfg.mode='link tx rx'
EOF
COMMIT_SYSTEM=1
}
set_led_usbdev() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local dev=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='usbdev'
set system.$cfg.dev='$dev'
set system.$cfg.interval='50'
EOF
COMMIT_SYSTEM=1
}
set_led_wlan() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local trigger=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
EOF
COMMIT_SYSTEM=1
}
ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 17:02:46 +02:00
set_led_switch() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local trigger=$4
local port_mask=$5
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
set system.$cfg.port_mask='$port_mask'
EOF
COMMIT_SYSTEM=1
}
ar71xx: combine LEDs setup in one file git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 13:20:49 +02:00
set_led_default() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local default=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.default='$default'
EOF
COMMIT_SYSTEM=1
}
. /lib/ar71xx.sh
board=$(ar71xx_board_name)
case "$board" in
ar71xx: add support for the ALFA Network N2/N5 boards git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01 21:30:25 +02:00
alfa-nx)
set_led_netdev "wan" "WAN" "alfa:green:led_2" "eth0"
set_led_netdev "lan" "LAN" "alfa:green:led_3" "eth1"
;;
[ar71xx] add support for the Atheros AP113 reference board This reference board is equipped with: - AR7242 SoC - AR9580 on-board Wi-Fi - AR8316 switch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-28 15:19:49 +02:00
ap113)
set_led_usbdev "usb" "USB" "ap113:green:usb" "1-1"
;;
rb750)
ar71xx: combine LEDs setup in one file git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 13:20:49 +02:00
set_led_default "act" "act" "rb750:green:act" "1"
set_led_netdev "port1" "port1" "rb750:green:port1" "eth1"
ar71xx: fix LED configuration on the RB-750 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-05 20:08:28 +02:00
set_led_switch "port2" "port2" "rb750:green:port2" "switch0" "0x10"
set_led_switch "port3" "port3" "rb750:green:port3" "switch0" "0x08"
set_led_switch "port4" "port4" "rb750:green:port4" "switch0" "0x04"
set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02"
ar71xx: combine LEDs setup in one file git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 13:20:49 +02:00
;;
ar71xx: fix ethernet LEDs on the DIR-600-A1 board git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 20:37:24 +02:00
dir-600-a1|\
ar71xx: support for D-LINK DIR-615 rev. E4 This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 20:37:09 +02:00
dir-615-e4)
ar71xx: unify LED names on D-Link boards git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 20:37:15 +02:00
set_led_netdev "wan" "WAN" "d-link:green:wan" "eth1"
set_led_switch "lan1" "LAN1" "d-link:green:lan1" "switch0" "0x02"
set_led_switch "lan2" "LAN2" "d-link:green:lan2" "switch0" "0x04"
set_led_switch "lan3" "LAN3" "d-link:green:lan3" "switch0" "0x08"
set_led_switch "lan4" "LAN4" "d-link:green:lan4" "switch0" "0x10"
ar71xx: support for D-LINK DIR-615 rev. E4 This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 20:37:09 +02:00
;;
ar71xx: combine LEDs setup in one file git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 13:20:49 +02:00
dir-825-b1)
ar71xx: unify LED names on D-Link boards git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 20:37:15 +02:00
set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1"
ar71xx: combine LEDs setup in one file git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 13:20:49 +02:00
;;
ar71xx: add support for ALFA Network's Hornet-UB board git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 22:54:10 +02:00
hornet-ub)
set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0"
set_led_netdev "wan" "WAN" "alfa:blue:wan" "eth1"
set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt"
set_led_usbdev "usb" "USB" "alfa:blue:usb" "1-1"
;;
ar71xx: combine LEDs setup in one file git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 13:20:49 +02:00
mzk-w04u)
set_led_usbdev "usb" "USB" "planex:green:usb" "1-1"
;;
ar71xx: preset WLAN LED config on MZK-W300NH git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 20:40:36 +02:00
mzk-w300nh)
set_led_wlan "wlan" "WLAN" "planex:green:wlan" "phy0tpt"
;;
ar71xx: combine LEDs setup in one file git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 13:20:49 +02:00
nbg460n_550n_550nh)
set_led_wlan "wlan" "WLAN" "nbg460n:green:wlan" "phy0tpt"
;;
ar71xx: configure default led behavior for the OM2P Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-02 00:48:59 +02:00
om2p)
set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0"
set_led_netdev "port2" "port2" "om2p:blue:lan" "eth1"
;;
ar71xx: add support for TP-Link TL-MR11U Adds support for TL-MR11U, a portable router with very similar hardware to the TL-WR703N and TL-MR3020, but with an onboard 2000mAh battery. Tested, working: All interfaces (Ethernet, 802.11n, USB) WPS & Reset switches (Power appears to be a hardware slider) Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled) Sysupgrade [juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch breakage] Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 20:37:01 +02:00
tl-mr11u | \
ar71xx: add default LED configuration for the TL-MR3020 Also use the system LED for diagnostic. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 19:30:49 +02:00
tl-mr3020)
set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour This patch fixes the board detection of the TL-MR3020. The LED behaviour has also been modified: * The WPS LED is the diag LED now. * A netdev trigger for the LAN LED has been added. The profile of the TL-MR3020 has been updated because the needed package "kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev trigger for the 3G/USB LED. [juhosg: the board name changes has been removed, and the kernel files has been changed instead.] Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-25 09:44:45 +02:00
set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
ar71xx: add default LED configuration for the TL-MR3020 Also use the system LED for diagnostic. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 19:30:49 +02:00
;;
ar71xx: combine LEDs setup in one file git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 13:20:49 +02:00
tl-mr3220 | \
tl-mr3420 )
set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
;;
ar71xx: allow to use LAN LED on the TL-WA901N/ND boards git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 19:30:50 +02:00
tl-wa901nd)
set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 17:02:46 +02:00
tl-wr741nd)
set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02"
set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x04"
set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08"
set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10"
;;
tl-wr741nd-v4)
set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
;;
ar71xx: combine LEDs setup in one file git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 13:20:49 +02:00
tl-wr941nd)
set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
tl-wr1043nd)
set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
ar71xx: add initial support for the TL-WR2543N/ND board The WLAN LEDs are not working yet. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 21:36:35 +02:00
tl-wr2543n)
set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
;;
ar71xx: combine LEDs setup in one file git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 13:20:49 +02:00
wrt160nl)
set_led_wlan "wlan" "WLAN" "wrt160nl:blue:wlan" "phy0tpt"
;;
ar71xx: rewrite WNDR3700/3800 handling git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 15:03:54 +02:00
wndr3700)
ar71xx: combine LEDs setup in one file git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 13:20:49 +02:00
set_led_default "wan" "WAN LED (green)" "wndr3700:green:wan" "0"
set_led_usbdev "usb" "USB" "wndr3700:green:usb" "1-1"
;;
ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 22:49:34 +02:00
whr-g301n |\
whr-hp-g300n |\
whr-hp-gn)
set_led_netdev "wan" "WAN" "buffalo:green:wan" "eth1"
set_led_switch "lan1" "LAN1" "buffalo:green:lan1" "switch0" "0x02"
set_led_switch "lan2" "LAN2" "buffalo:green:lan2" "switch0" "0x04"
set_led_switch "lan3" "LAN3" "buffalo:green:lan3" "switch0" "0x08"
set_led_switch "lan4" "LAN4" "buffalo:green:lan4" "switch0" "0x10"
;;
ar71xx: combine LEDs setup in one file git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01 13:20:49 +02:00
wzr-hp-g300nh)
set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt"
set_led_netdev "router" "Router" "buffalo:green:router" "eth1"
set_led_usbdev "usb" "USB" "buffalo:blue:usb" "1-1"
;;
zcn-1523h-2)
set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0"
;;
zcn-1523h-5)
set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0"
set_led_netdev "lan2" "lan2" "zcn-1523h:green:lan2" "eth1"
;;
esac
[ "$COMMIT_SYSTEM" == "1" ] && uci commit system
exit 0
Copy Permalink