qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 05:42:59 +02:00
Code

[ar71xx] add support for the Atheros AP113 reference board

Browse Source 
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29935 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
florian 2012-01-28 13:19:49 +00:00
parent ccc47d58db
commit ebbec463c7
14 changed files with 316 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
target/linux/ar71xx/base-files/etc/uci-defaults/leds
View File

@ -106,7 +106,10 @@ alfa-nx)
set_led_netdev "lan" "LAN" "alfa:green:led_3" "eth1"
;;
rb-750)
ap113)
set_led_usbdev "usb" "USB" "ap113:green:usb" "1-1"
;;
rb750)
set_led_default "act" "act" "rb750:green:act" "1"
set_led_netdev "port1" "port1" "rb750:green:port1" "eth1"
set_led_switch "port2" "port2" "rb750:green:port2" "switch0" "0x10"

3
target/linux/ar71xx/base-files/etc/uci-defaults/network
View File

@ -67,7 +67,8 @@ rb-493g)
;;
wzr-hp-g300nh2 |\
pb92)
pb92 |\
ap113)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0t 1 3 4 5"

3
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -136,6 +136,9 @@ ar71xx_board_detect() {
*ALL0258N)
name="all0258n"
;;
*AP113)
name="ap113"
;;
*AP121)
name="ap121"
;;

1
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -79,6 +79,7 @@ platform_check_image() {
;;
alfa-ap96 | \
alfa-nx | \
ap113 | \
ap121 | \
ap121-mini | \
ap96 | \

1
target/linux/ar71xx/config-2.6.39
View File

@ -16,6 +16,7 @@ CONFIG_AR71XX_DEV_USB=y
CONFIG_AR71XX_MACH_ALFA_AP96=y
CONFIG_AR71XX_MACH_ALFA_NX=y
CONFIG_AR71XX_MACH_ALL0258N=y
CONFIG_AR71XX_MACH_AP113=y
CONFIG_AR71XX_MACH_AP121=y
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y

1
target/linux/ar71xx/config-3.2
View File

@ -25,6 +25,7 @@ CONFIG_ATH79_DEV_WMAC=y
CONFIG_ATH79_MACH_ALFA_AP96=y
CONFIG_ATH79_MACH_ALFA_NX=y
CONFIG_ATH79_MACH_ALL0258N=y
CONFIG_ATH79_MACH_AP113=y
CONFIG_ATH79_MACH_AP121=y
CONFIG_ATH79_MACH_AP81=y
CONFIG_ATH79_MACH_AP83=y

9
target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig
View File

@ -59,6 +59,15 @@ config AR71XX_MACH_AP96
select AR71XX_DEV_LEDS_GPIO
select AR71XX_DEV_USB
config AR71XX_MACH_AP113
bool "Atheros AP113 board support"
select SOC_AR724X
select AR71XX_DEV_M25P80
select AR71XX_DEV_PB9X_PCI if PCI
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
select AR71XX_DEV_USB
config AR71XX_MACH_AP121
bool "Atheros AP121 board support"
select AR71XX_DEV_M25P80

1
target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile
View File

@ -31,6 +31,7 @@ obj-$(CONFIG_AR71XX_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o
obj-$(CONFIG_AR71XX_MACH_ALFA_AP96) += mach-alfa-ap96.o
obj-$(CONFIG_AR71XX_MACH_ALFA_NX) += mach-alfa-nx.o
obj-$(CONFIG_AR71XX_MACH_ALL0258N) += mach-all0258n.o
obj-$(CONFIG_AR71XX_MACH_AP113) += mach-ap113.o
obj-$(CONFIG_AR71XX_MACH_AP121) += mach-ap121.o
obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o

129
target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap113.c Normal file
View File

@ -0,0 +1,129 @@
/*
* Atheros AP113 board support
*
* Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/flash.h>
#include "machtype.h"
#include "devices.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-pb9x-pci.h"
#include "dev-usb.h"
#define AP113_GPIO_LED_USB 0
#define AP113_GPIO_LED_STATUS 1
#define AP113_GPIO_LED_ST 11
#define AP113_GPIO_BTN_JUMPSTART 12
#define AP113_KEYS_POLL_INTERVAL 20 /* msecs */
#define AP113_KEYS_DEBOUNCE_INTERVAL (3 * AP113_KEYS_POLL_INTERVAL)
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition ap113_parts[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "rootfs",
.offset = 0x010000,
.size = 0x300000,
},
{
.name = "uImage",
.offset = 0x300000,
.size = 0x3e0000,
},
{
.name = "NVRAM",
.offset = 0x3e0000,
.size = 0x010000,
},
{
.name = "ART",
.offset = 0x3f0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
},
};
#define ap113_nr_parts ARRAY_SIZE(ap113_parts)
#else
#define ap113_parts NULL
#define ap113_nr_parts 0
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data ap113_flash_data = {
.parts = ap113_parts,
.nr_parts = ap113_nr_parts,
};
static struct gpio_led ap113_leds_gpio[] __initdata = {
{
.name = "ap113:green:usb",
.gpio = AP113_GPIO_LED_USB,
.active_low = 1,
},
{
.name = "ap113:green:status",
.gpio = AP113_GPIO_LED_STATUS,
.active_low = 1,
},
{
.name = "ap113:green:st",
.gpio = AP113_GPIO_LED_ST,
.active_low = 1,
}
};
static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
{
.desc = "jumpstart button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
.gpio = AP113_GPIO_BTN_JUMPSTART,
.active_low = 1,
},
};
static void __init ap113_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
ar71xx_add_device_m25p80(&ap113_flash_data);
ar71xx_add_device_mdio(0, ~BIT(0));
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.phy_mask = BIT(0);
ar71xx_add_device_eth(0);
ar71xx_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ap113_gpio_keys),
ap113_gpio_keys);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
ap113_leds_gpio);
ar71xx_add_device_usb();
pb9x_pci_init();
}
MIPS_MACHINE(AR71XX_MACH_AP113, "AP113", "Atheros AP113",
ap113_setup);

1
target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h
View File

@ -19,6 +19,7 @@ enum ar71xx_mach_type {
AR71XX_MACH_ALFA_AP96, /* ALFA Network AP96 board */
AR71XX_MACH_ALFA_NX, /* ALFA Network N2/N5 board */
AR71XX_MACH_ALL0258N, /* Allnet ALL0258N */
AR71XX_MACH_AP113, /* Atheros AP113 */
AR71XX_MACH_AP121, /* Atheros AP121 */
AR71XX_MACH_AP121_MINI, /* Atheros AP121-MINI */
AR71XX_MACH_AP81, /* Atheros AP81 */

124
target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap113.c Normal file
View File

@ -0,0 +1,124 @@
/*
* Atheros AP113 board support
*
* Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/flash.h>
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "pci.h"
#include "dev-usb.h"
#include "machtypes.h"
#define AP113_GPIO_LED_USB 0
#define AP113_GPIO_LED_STATUS 1
#define AP113_GPIO_LED_ST 11
#define AP113_GPIO_BTN_JUMPSTART 12
#define AP113_KEYS_POLL_INTERVAL 20 /* msecs */
#define AP113_KEYS_DEBOUNCE_INTERVAL (3 * AP113_KEYS_POLL_INTERVAL)
static struct mtd_partition ap113_parts[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "rootfs",
.offset = 0x010000,
.size = 0x300000,
},
{
.name = "uImage",
.offset = 0x300000,
.size = 0x3e0000,
},
{
.name = "NVRAM",
.offset = 0x3e0000,
.size = 0x010000,
},
{
.name = "ART",
.offset = 0x3f0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
},
};
#define ap113_nr_parts ARRAY_SIZE(ap113_parts)
static struct flash_platform_data ap113_flash_data = {
.parts = ap113_parts,
.nr_parts = ap113_nr_parts,
};
static struct gpio_led ap113_leds_gpio[] __initdata = {
{
.name = "ap113:green:usb",
.gpio = AP113_GPIO_LED_USB,
.active_low = 1,
},
{
.name = "ap113:green:status",
.gpio = AP113_GPIO_LED_STATUS,
.active_low = 1,
},
{
.name = "ap113:green:st",
.gpio = AP113_GPIO_LED_ST,
.active_low = 1,
}
};
static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
{
.desc = "jumpstart button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
.gpio = AP113_GPIO_BTN_JUMPSTART,
.active_low = 1,
},
};
static void __init ap113_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(&ap113_flash_data);
ath79_register_mdio(0, ~BIT(0));
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(0);
ath79_register_eth(0);
ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ap113_gpio_keys),
ap113_gpio_keys);
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
ap113_leds_gpio);
ath79_register_pci();
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113",
ap113_setup);

11
target/linux/ar71xx/generic/profiles/atheros.mk
View File

@ -5,6 +5,17 @@
# See /LICENSE for more information.
#
define Profile/AP113
NAME:=Atheros AP113 reference board
PACKAGES:=kmod-usb-core kmod-usb2
endef
define Profile/AP113/description
Package set optimized for the Atheros AP113 reference board.
endef
$(eval $(call Profile,AP113))
define Profile/AP121
NAME:=Atheros AP121 reference board
PACKAGES:=kmod-usb-core kmod-usb2

7
target/linux/ar71xx/image/Makefile
View File

@ -626,6 +626,12 @@ define Image/Build/Profile/ALFAAP96
$(call Image/Build/Template/$(fs_128k)/$(1),AthLzma,alfa-ap96,$(alfa_ap96_cmdline),alfa_ap96_mtdlayout,2097152,13631488,RKuImage)
endef
ap113_mtd_layout=64k(u-boot),3008k(rootfs),896k(uImage),64k(NVRAM),64k(ART),3904k@0x10000(firmware)
ap113_cmdline=board=AP113 console=ttyS0,115200
define Image/Build/Profile/AP113
$(call Image/Build/Template/$(fs_64k)/$(1),AthLzma,ap113,$(ap113_cmdline),ap113_mtd_layout,917504,3080192,RK)
endef
ap121_mtdlayout_2M=mtdparts=spi0.0:64k(u-boot)ro,1216k(rootfs),704k(kernel),64k(art)ro,1920k@0x10000(firmware)
ap121_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
@ -977,6 +983,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/ALFAAP96,$(1))
$(call Image/Build/Profile/ALFANX,$(1))
$(call Image/Build/Profile/ALL0258N,$(1))
$(call Image/Build/Profile/AP113,$(1))
$(call Image/Build/Profile/AP121,$(1))
$(call Image/Build/Profile/AP121MINI,$(1))
$(call Image/Build/Profile/AP81,$(1))

32
target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
View File

@ -1,12 +1,13 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -16,17 +16,78 @@
@@ -16,17 +16,79 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */
+ ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */
+ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */
+ ATH79_MACH_AP113, /* Atheros AP113 reference board */
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
@ -81,7 +82,7 @@
#endif /* _ATH79_MACHTYPE_H */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -2,6 +2,42 @@ if ATH79
@@ -2,6 +2,52 @@ if ATH79
menu "Atheros AR71XX/AR724X/AR913X machine selection"
@ -120,11 +121,21 @@
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_AP113
+ bool "Atheros AP113 board support"
+ select SOC_AR724X
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_PB9X_PCI if PCI
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_USB
+ select ATH79_DEV_ETH
+
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
@@ -28,6 +64,36 @@ config ATH79_MACH_AP81
@@ -28,6 +74,36 @@ config ATH79_MACH_AP81
Say 'Y' here if you want your kernel to support the
Atheros AP81 reference board.
@ -161,7 +172,7 @@
config ATH79_MACH_DB120
bool "Atheros DB120 reference board"
select SOC_AR934X
@@ -42,6 +108,13 @@ config ATH79_MACH_DB120
@@ -42,6 +118,13 @@ config ATH79_MACH_DB120
Say 'Y' here if you want your kernel to support the
Atheros DB120 reference board.
@ -175,7 +186,7 @@
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
@@ -54,6 +127,359 @@ config ATH79_MACH_PB44
@@ -54,6 +137,359 @@ config ATH79_MACH_PB44
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
@ -535,7 +546,7 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM (rev 1.0) board"
select SOC_AR724X
@@ -67,6 +483,24 @@ config ATH79_MACH_UBNT_XM
@@ -67,6 +503,24 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
@ -560,7 +571,7 @@
endmenu
config SOC_AR71XX
@@ -96,10 +530,6 @@ config SOC_AR934X
@@ -96,10 +550,6 @@ config SOC_AR934X
select PCI_AR724X if PCI
def_bool n
@ -571,7 +582,7 @@
config ATH79_DEV_AP9X_PCI
select ATH79_PCI_ATH9K_FIXUP
def_bool n
@@ -110,7 +540,14 @@ config ATH79_DEV_DSA
@@ -110,7 +560,14 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@ -587,7 +598,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
@@ -135,4 +572,7 @@ config ATH79_NVRAM
@@ -135,4 +592,7 @@ config ATH79_NVRAM
config ATH79_PCI_ATH9K_FIXUP
def_bool n
@ -597,13 +608,14 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -36,8 +36,54 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
@@ -36,8 +36,55 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
#
# Machines
#
+obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o
+obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o
+obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o
+obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
+obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o