board-n526: Add very basic n526 support.

target/linux/xburst/files-2.6.31/arch/mips/jz4740/Kconfig

@@ -8,6 +8,12 @@ config JZ4740_QI_LB60
 	select DMA_NONCOHERENT
 	select SOC_JZ4740
 
+config JZ4740_N526
+	bool "Hanvon n526 eBook reader"
+	select DMA_NONCOHERENT
+	select SOC_JZ4740
+
+
 endchoice
 
 config SOC_JZ4740

target/linux/xburst/files-2.6.31/arch/mips/jz4740/Makefile

@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y += prom.o irq.o time.o reset.o setup.o dma.o \
+obj-y += prom.o irq.o time2.o reset.o setup.o dma.o \
 	gpio.o clock.o platform.o
 
 obj-$(CONFIG_PROC_FS)		+= proc.o
@@ -17,6 +17,7 @@ obj-$(CONFIG_JZ4740_LYRA)	+= board-lyra.o
 obj-$(CONFIG_JZ4725_DIPPER)	+= board-dipper.o
 obj-$(CONFIG_JZ4720_VIRGO)	+= board-virgo.o
 obj-$(CONFIG_JZ4740_QI_LB60)	+= board-qi_lb60.o
+obj-$(CONFIG_JZ4740_N526)	+= board-n526.o
 
 # PM support
 

target/linux/xburst/files-2.6.31/arch/mips/jz4740/board-n526.c

@@ -0,0 +1,158 @@
+/*
+ *  Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ *  	N526 eBook reader support
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-jz4740/platform.h>
+
+#include <linux/mtd/jz4740_nand.h>
+#include <linux/jz4740_fb.h>
+#include <linux/power_supply.h>
+#include <linux/power/jz4740-battery.h>
+#include <linux/mmc/jz4740_mmc.h>
+
+/* NAND */
+static struct nand_ecclayout n526_ecclayout = {
+	.eccbytes = 36,
+	.eccpos = {
+		6,  7,  8,  9,  10, 11, 12, 13,
+		14, 15, 16, 17, 18, 19, 20, 21,
+		22, 23, 24, 25, 26, 27, 28, 29,
+		30, 31, 32, 33, 34, 35, 36, 37,
+		38, 39, 40, 41},
+	.oobfree = {
+		{.offset = 2,
+		 .length = 4},
+		{.offset = 42,
+		 .length = 22}}
+};
+
+static struct mtd_partition n526_partitions[] = {
+	{ .name = "NAND BOOT partition",
+	  .offset = 0 * 0x100000,
+	  .size = 4 * 0x100000,
+ 	},
+	{ .name = "NAND KERNEL partition",
+	  .offset = 4 * 0x100000,
+	  .size = 4 * 0x100000,
+ 	},
+	{ .name = "NAND ROOTFS partition",
+	  .offset = 8 * 0x100000,
+	  .size = 504 * 0x100000,
+ 	},
+	{ .name = "NAND DATA partition",
+	  .offset = 512 * 0x100000,
+	  .size = 512 * 0x100000,
+ 	},
+};
+
+static struct jz_nand_platform_data n526_nand_pdata = {
+	.ecc_layout = &n526_ecclayout,
+	.partitions = n526_partitions,
+	.num_partitions = ARRAY_SIZE(n526_partitions),
+	.busy_gpio = 94,
+};
+
+
+/* Battery */
+/*static struct jz_batt_info n526_battery_pdata = {
+	.dc_dect_gpio	= GPIO_DC_DETE_N,
+	.usb_dect_gpio	= GPIO_USB_DETE,
+	.charg_stat_gpio  = GPIO_CHARG_STAT_N,
+
+	.min_voltag	= 3600000,
+	.max_voltag	= 4200000,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
+};*/
+
+
+static struct jz4740_mmc_platform_data n526_mmc_pdata = {
+	.gpio_card_detect	= JZ_GPIO_PORTD(7),
+	.card_detect_active_low = 1,
+	.gpio_read_only		= -1,
+	.gpio_power		= JZ_GPIO_PORTD(17),
+	.power_active_low = 1,
+};
+
+static struct gpio_led n526_leds[] = {
+	{
+		.name = "n526:blue:power",
+		.gpio = JZ_GPIO_PORTD(28),
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	}
+};
+
+static struct gpio_led_platform_data n526_leds_pdata = {
+	.leds = n526_leds,
+	.num_leds = ARRAY_SIZE(n526_leds),
+};
+
+static struct platform_device n526_leds_device = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = &n526_leds_pdata,
+	},
+};
+
+static struct platform_device *jz_platform_devices[] __initdata = {
+	&jz4740_usb_ohci_device,
+	&jz4740_usb_gdt_device,
+	&jz4740_mmc_device,
+	&jz4740_nand_device,
+	&jz4740_i2s_device,
+	&jz4740_codec_device,
+	&jz4740_rtc_device,
+	&n526_leds_device,
+};
+
+static void __init board_gpio_setup(void)
+{
+	/* We only need to enable/disable pullup here for pins used in generic
+	 * drivers. Everything else is done by the drivers themselfs. */
+	jz_gpio_disable_pullup(JZ_GPIO_PORTD(17));
+	jz_gpio_enable_pullup(JZ_GPIO_PORTD(7));
+}
+
+static int __init n526_init_platform_devices(void)
+{
+	jz4740_nand_device.dev.platform_data = &n526_nand_pdata;
+/*	jz4740_battery_device.dev.platform_data = &n526_battery_pdata;*/
+	jz4740_mmc_device.dev.platform_data = &n526_mmc_pdata;
+
+	return platform_add_devices(jz_platform_devices,
+					ARRAY_SIZE(jz_platform_devices));
+
+}
+extern int jz_gpiolib_init(void);
+extern int jz_init_clocks(unsigned long extal);
+
+static int __init n526_board_setup(void)
+{
+	if (jz_gpiolib_init())
+		panic("Failed to initalize jz gpio\n");
+	jz_init_clocks(12000000);
+
+	board_gpio_setup();
+
+	if (n526_init_platform_devices())
+		panic("Failed to initalize platform devices\n");
+
+	return 0;
+}
+
+arch_initcall(n526_board_setup);