mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-24 05:11:46 +02:00
restructure; cleanup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@120 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
parent
59c30bc41c
commit
1dfdb01703
@ -15,7 +15,7 @@ BUSYBOX_SOURCE:=busybox-1.00-pre8.tar.bz2
|
||||
BUSYBOX_SITE:=http://www.busybox.net/downloads
|
||||
endif
|
||||
BUSYBOX_UNZIP=bzcat
|
||||
BUSYBOX_CONFIG:=$(SOURCE_DIR)/busybox.config
|
||||
BUSYBOX_CONFIG:=$(SOURCE_DIR)/openwrt/busybox/busybox.config
|
||||
|
||||
$(DL_DIR)/$(BUSYBOX_SOURCE):
|
||||
$(WGET) -P $(DL_DIR) $(BUSYBOX_SITE)/$(BUSYBOX_SOURCE)
|
||||
@ -25,7 +25,7 @@ busybox-source: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_CONFIG)
|
||||
$(BUSYBOX_DIR)/.configured: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_CONFIG)
|
||||
$(BUSYBOX_UNZIP) $(DL_DIR)/$(BUSYBOX_SOURCE) | tar -C $(BUILD_DIR) -xvf -
|
||||
# Allow busybox patches.
|
||||
$(SOURCE_DIR)/patch-kernel.sh $(BUSYBOX_DIR) $(SOURCE_DIR) busybox-*.patch
|
||||
$(SOURCE_DIR)/patch-kernel.sh $(BUSYBOX_DIR) $(SOURCE_DIR)/openwrt/busybox/patches
|
||||
cp $(BUSYBOX_CONFIG) $(BUSYBOX_DIR)/.config
|
||||
$(SED) "s,^CROSS.*,CROSS=$(TARGET_CROSS)\n\
|
||||
PREFIX=$(TARGET_DIR),;" $(BUSYBOX_DIR)/Rules.mak
|
||||
|
@ -93,15 +93,15 @@ $(OPENSSH_IPK_DIR)/usr/bin/ssh: $(OPENSSH_DIR)/ssh
|
||||
$(OPENSSH_SERVER_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
|
||||
rm -rf $(OPENSSH_IPK_DIR)/build
|
||||
mkdir -p $(OPENSSH_IPK_DIR)/build/CONTROL
|
||||
cp $(SOURCE_DIR)/openssh.server.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
|
||||
cp $(SOURCE_DIR)/openssh.server.conffiles $(OPENSSH_IPK_DIR)/build/CONTROL/conffiles
|
||||
cp $(SOURCE_DIR)/openssh.server.preinst $(OPENSSH_IPK_DIR)/build/CONTROL/preinst
|
||||
cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.server.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
|
||||
cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.server.conffiles $(OPENSSH_IPK_DIR)/build/CONTROL/conffiles
|
||||
cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.server.preinst $(OPENSSH_IPK_DIR)/build/CONTROL/preinst
|
||||
chmod a+x $(OPENSSH_IPK_DIR)/build/CONTROL/preinst
|
||||
cp $(SOURCE_DIR)/openssh.server.postinst $(OPENSSH_IPK_DIR)/build/CONTROL/postinst
|
||||
cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.server.postinst $(OPENSSH_IPK_DIR)/build/CONTROL/postinst
|
||||
chmod a+x $(OPENSSH_IPK_DIR)/build/CONTROL/postinst
|
||||
mkdir -p $(OPENSSH_IPK_DIR)/build/etc/init.d
|
||||
cp $(SOURCE_DIR)/openssh.server.sshd_config $(OPENSSH_IPK_DIR)/build/etc/sshd_config
|
||||
cp $(SOURCE_DIR)/openssh.server.S50sshd-ipk $(OPENSSH_IPK_DIR)/build/etc/init.d/S50sshd
|
||||
cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.server.sshd_config $(OPENSSH_IPK_DIR)/build/etc/sshd_config
|
||||
cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.server.S50sshd-ipk $(OPENSSH_IPK_DIR)/build/etc/init.d/S50sshd
|
||||
chmod a+x $(OPENSSH_IPK_DIR)/build/etc/init.d/S50sshd
|
||||
mkdir -p $(OPENSSH_IPK_DIR)/build/usr/sbin
|
||||
cp $(OPENSSH_IPK_DIR)/usr/sbin/sshd $(OPENSSH_IPK_DIR)/build/usr/sbin
|
||||
@ -113,12 +113,12 @@ $(OPENSSH_SERVER_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
|
||||
$(OPENSSH_CLIENT_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
|
||||
rm -rf $(OPENSSH_IPK_DIR)/build
|
||||
mkdir -p $(OPENSSH_IPK_DIR)/build/CONTROL
|
||||
cp $(SOURCE_DIR)/openssh.client.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
|
||||
cp $(SOURCE_DIR)/openssh.client.conffiles $(OPENSSH_IPK_DIR)/build/CONTROL/conffiles
|
||||
cp $(SOURCE_DIR)/openssh.client.preinst $(OPENSSH_IPK_DIR)/build/CONTROL/preinst
|
||||
cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.client.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
|
||||
cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.client.conffiles $(OPENSSH_IPK_DIR)/build/CONTROL/conffiles
|
||||
cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.client.preinst $(OPENSSH_IPK_DIR)/build/CONTROL/preinst
|
||||
chmod a+x $(OPENSSH_IPK_DIR)/build/CONTROL/preinst
|
||||
mkdir -p $(OPENSSH_IPK_DIR)/build/etc
|
||||
cp $(SOURCE_DIR)/openssh.client.ssh_config $(OPENSSH_IPK_DIR)/build/etc/ssh_config
|
||||
cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.client.ssh_config $(OPENSSH_IPK_DIR)/build/etc/ssh_config
|
||||
mkdir -p $(OPENSSH_IPK_DIR)/build/usr/bin
|
||||
cp $(OPENSSH_IPK_DIR)/usr/bin/ssh $(OPENSSH_IPK_DIR)/build/usr/bin
|
||||
cp $(OPENSSH_IPK_DIR)/usr/bin/scp $(OPENSSH_IPK_DIR)/build/usr/bin
|
||||
@ -128,7 +128,7 @@ $(OPENSSH_CLIENT_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
|
||||
$(OPENSSH_SFTP_SERVER_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
|
||||
rm -rf $(OPENSSH_IPK_DIR)/build
|
||||
mkdir -p $(OPENSSH_IPK_DIR)/build/CONTROL
|
||||
cp $(SOURCE_DIR)/openssh.sftp-server.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
|
||||
cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.sftp-server.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
|
||||
mkdir -p $(OPENSSH_IPK_DIR)/build/usr/sbin
|
||||
cp $(OPENSSH_IPK_DIR)/usr/sbin/sftp-server $(OPENSSH_IPK_DIR)/build/usr/sbin
|
||||
cd $(BUILD_DIR); $(STAGING_DIR)/bin/ipkg-build -c -o root -g root $(OPENSSH_IPK_DIR)/build
|
||||
@ -137,7 +137,7 @@ $(OPENSSH_SFTP_SERVER_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
|
||||
$(OPENSSH_SFTP_CLIENT_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
|
||||
rm -rf $(OPENSSH_IPK_DIR)/build
|
||||
mkdir -p $(OPENSSH_IPK_DIR)/build/CONTROL
|
||||
cp $(SOURCE_DIR)/openssh.sftp-client.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
|
||||
cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.sftp-client.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
|
||||
mkdir -p $(OPENSSH_IPK_DIR)/build/usr/bin
|
||||
cp $(OPENSSH_IPK_DIR)/usr/bin/sftp $(OPENSSH_IPK_DIR)/build/usr/bin
|
||||
cd $(BUILD_DIR); $(STAGING_DIR)/bin/ipkg-build -c -o root -g root $(OPENSSH_IPK_DIR)/build
|
||||
@ -146,7 +146,7 @@ $(OPENSSH_SFTP_CLIENT_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
|
||||
$(OPENSSH_CLIENT_EX_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
|
||||
rm -rf $(OPENSSH_IPK_DIR)/build
|
||||
mkdir -p $(OPENSSH_IPK_DIR)/build/CONTROL
|
||||
cp $(SOURCE_DIR)/openssh.client.ex.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
|
||||
cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.client.ex.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
|
||||
mkdir -p $(OPENSSH_IPK_DIR)/build/usr/bin
|
||||
cp $(OPENSSH_IPK_DIR)/usr/bin/ssh-add $(OPENSSH_IPK_DIR)/build/usr/bin
|
||||
cp $(OPENSSH_IPK_DIR)/usr/bin/ssh-agent $(OPENSSH_IPK_DIR)/build/usr/bin
|
||||
|
@ -70,7 +70,7 @@ openssl: uclibc $(TARGET_DIR)/usr/lib/libcrypto.so.0.9.7
|
||||
|
||||
$(LIBSSL_IPK): uclibc $(STAGING_DIR)/usr/lib/libcrypto.a
|
||||
mkdir -p $(OPENSSL_IPK_DIR)/CONTROL
|
||||
cp $(SOURCE_DIR)/libssl.control $(OPENSSL_IPK_DIR)/CONTROL/control
|
||||
cp $(SOURCE_DIR)/openwrt/openssl/control $(OPENSSL_IPK_DIR)/CONTROL/control
|
||||
mkdir -p $(OPENSSL_IPK_DIR)/usr/lib
|
||||
cp -fa $(STAGING_DIR)/lib/libcrypto.so* $(OPENSSL_IPK_DIR)/usr/lib/
|
||||
cp -fa $(STAGING_DIR)/lib/libssl.so* $(OPENSSL_IPK_DIR)/usr/lib/
|
||||
|
@ -36,22 +36,10 @@ openwrt-base: $(OPENWRT_TARGETS)
|
||||
|
||||
ifneq ($(filter $(TARGETS),openwrt-base),)
|
||||
|
||||
# WRT54G_SOURCE=wrt54gv2.2.02.2.tgz
|
||||
# WRT54G_SITE=http://www.linksys.com/support/opensourcecode/wrt54gv2/2.02.2
|
||||
|
||||
# WRT54G_SOURCE=wrt54g.2.02.7.tgz
|
||||
# WRT54G_SITE=http://www.linksys.com/support/opensourcecode/wrt54gv2/2.02.7
|
||||
# WRT54G_DIR=$(BUILD_DIR)/WRT54G
|
||||
|
||||
WRT54G_SOURCE=wrt54gs.2.07.1.tgz
|
||||
WRT54G_SITE=http://www.linksys.com/support/opensourcecode/wrt54gs/2.07.1
|
||||
|
||||
WRT54G_DIR=$(BUILD_DIR)/WRT54GS
|
||||
|
||||
# OPENWRT_ROOT=openwrt-root.tar.bz2
|
||||
# OPENWRT_SITE=http://127.0.0.1
|
||||
# OPENWRT_DIR=$(BUILD_DIR)/openwrt
|
||||
|
||||
LINUX_DIR=$(WRT54G_DIR)/release/src/linux/linux
|
||||
LINUX_FORMAT=zImage
|
||||
LINUX_BINLOC=arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz
|
||||
@ -63,17 +51,14 @@ $(LINUX_DIR)/.unpacked: $(WRT54G_DIR)/.prepared
|
||||
touch $(LINUX_DIR)/.unpacked
|
||||
|
||||
$(LINUX_DIR)/.patched: $(WRT54G_DIR)/.prepared
|
||||
$(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR)/../.. $(SOURCE_DIR) openwrt-linux-netfilter.patch
|
||||
$(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR)/../.. $(SOURCE_DIR) openwrt-linux-sch_htb.patch
|
||||
$(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR)/../.. $(SOURCE_DIR) openwrt-wrt54g-linux.patch
|
||||
$(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR)/../.. $(SOURCE_DIR) openwrt-wrt54g-nfsswap.patch
|
||||
$(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR)/../.. $(SOURCE_DIR)/openwrt/kernel/patches
|
||||
# use replacement diag module code
|
||||
cp -f $(SOURCE_DIR)/openwrt-diag.c $(LINUX_DIR)/drivers/net/diag/diag_led.c
|
||||
cp -f $(SOURCE_DIR)/openwrt-wrt54g-linux.config $(LINUX_DIR)/.config
|
||||
cp -f $(SOURCE_DIR)/openwrt/kernel/diag.c $(LINUX_DIR)/drivers/net/diag/diag_led.c
|
||||
cp -f $(SOURCE_DIR)/openwrt/kernel/linux.config $(LINUX_DIR)/.config
|
||||
-(cd $(BUILD_DIR); ln -sf $(LINUX_DIR) linux)
|
||||
-(cd $(LINUX_DIR)/arch/mips/brcm-boards/bcm947xx/; \
|
||||
rm -rf compressed; \
|
||||
tar jxvf $(SOURCE_DIR)/compressed-20040531.tar.bz2; \
|
||||
tar jxvf $(SOURCE_DIR)/openwrt/kernel/compressed-20040531.tar.bz2; \
|
||||
)
|
||||
touch $(LINUX_DIR)/.patched
|
||||
|
||||
@ -107,8 +92,7 @@ $(WRT54G_DIR)/.source: $(DL_DIR)/$(WRT54G_SOURCE)
|
||||
touch $(WRT54G_DIR)/.source
|
||||
|
||||
$(WRT54G_DIR)/.prepared: $(WRT54G_DIR)/.source
|
||||
$(SOURCE_DIR)/patch-kernel.sh $(WRT54G_DIR) $(SOURCE_DIR) openwrt-wrt54g-router.patch
|
||||
$(SOURCE_DIR)/patch-kernel.sh $(WRT54G_DIR) $(SOURCE_DIR) openwrt-wrt54g-shared.patch
|
||||
$(SOURCE_DIR)/patch-kernel.sh $(WRT54G_DIR) $(SOURCE_DIR)/openwrt/patches
|
||||
touch $(WRT54G_DIR)/.prepared
|
||||
|
||||
######################################################################
|
||||
@ -236,8 +220,8 @@ openwrt-prune:
|
||||
######################################################################
|
||||
|
||||
wrt-tools:
|
||||
$(CC) -o $(WRT54G_DIR)/release/tools/trx $(SOURCE_DIR)/trx.c
|
||||
$(CC) -o $(WRT54G_DIR)/release/tools/addpattern $(SOURCE_DIR)/addpattern.c
|
||||
$(CC) -o $(WRT54G_DIR)/release/tools/trx $(SOURCE_DIR)/openwrt/tools/trx.c
|
||||
$(CC) -o $(WRT54G_DIR)/release/tools/addpattern $(SOURCE_DIR)/openwrt/tools/addpattern.c
|
||||
|
||||
openwrt-linux.trx: openwrt-prune squashfsroot wrt-tools
|
||||
$(WRT54G_DIR)/release/tools/trx -o openwrt-linux.trx \
|
||||
@ -253,24 +237,4 @@ openwrt-g-code.bin: openwrt-gs-code.bin
|
||||
openwrt-code.bin: openwrt-gs-code.bin openwrt-g-code.bin
|
||||
|
||||
######################################################################
|
||||
|
||||
openwrt-sourceball:
|
||||
tar cjf buildroot-openwrt.tar.bz2 \
|
||||
README.openwrt \
|
||||
Makefile \
|
||||
Makefile-openwrt \
|
||||
make/openwrt.mk \
|
||||
make/uclibc.mk \
|
||||
make/busybox.mk \
|
||||
sources/uClibc.config \
|
||||
sources/uClibc.config-openwrt \
|
||||
sources/busybox-openwrt-*.patch \
|
||||
sources/busybox.config \
|
||||
sources/busybox.config-openwrt \
|
||||
sources/dnsmasq1-openwrt.patch \
|
||||
sources/iptables-openwrt-extensions.patch \
|
||||
sources/openwrt-wrt54g-linux.config \
|
||||
sources/openwrt-wrt54g-*.patch \
|
||||
sources/openwrt-diag.c
|
||||
|
||||
endif
|
||||
|
@ -66,7 +66,7 @@ zlib: uclibc $(TARGET_DIR)/lib/libz.so.1.1.4
|
||||
|
||||
$(ZLIB_IPK): uclibc $(STAGING_DIR)/lib/libz.so.1.1.4
|
||||
mkdir -p $(ZLIB_IPK_DIR)/CONTROL
|
||||
cp $(SOURCE_DIR)/zlib.control $(ZLIB_IPK_DIR)/CONTROL/control
|
||||
cp $(SOURCE_DIR)/openwrt/ipkg/zlib/control $(ZLIB_IPK_DIR)/CONTROL/control
|
||||
mkdir -p $(ZLIB_IPK_DIR)/lib
|
||||
cp -dpf $(STAGING_DIR)/lib/libz.so* $(ZLIB_IPK_DIR)/lib;
|
||||
-$(STRIP) --strip-unneeded $(ZLIB_IPK_DIR)/lib/libz.so*
|
||||
|
@ -1,129 +0,0 @@
|
||||
diff -urN busybox-dist/networking/udhcp/dumpleases.c busybox/networking/udhcp/dumpleases.c
|
||||
--- busybox-dist/networking/udhcp/dumpleases.c 2004-03-15 02:29:00.000000000 -0600
|
||||
+++ busybox/networking/udhcp/dumpleases.c 2004-03-16 09:52:32.000000000 -0600
|
||||
@@ -42,7 +42,7 @@
|
||||
#endif
|
||||
{
|
||||
FILE *fp;
|
||||
- int i, c, mode = REMAINING;
|
||||
+ int i, c, mode = ABSOLUTE;
|
||||
long expires;
|
||||
const char *file = LEASES_FILE;
|
||||
struct dhcpOfferedAddr lease;
|
||||
@@ -73,7 +73,7 @@
|
||||
|
||||
fp = xfopen(file, "r");
|
||||
|
||||
- printf("Mac Address IP-Address Expires %s\n", mode == REMAINING ? "in" : "at");
|
||||
+ printf("Mac Address IP-Address Hostname Expires %s\n", mode == REMAINING ? "in" : "at");
|
||||
/* "00:00:00:00:00:00 255.255.255.255 Wed Jun 30 21:49:08 1993" */
|
||||
while (fread(&lease, sizeof(lease), 1, fp)) {
|
||||
|
||||
@@ -84,7 +84,8 @@
|
||||
addr.s_addr = lease.yiaddr;
|
||||
printf(" %-15s", inet_ntoa(addr));
|
||||
expires = ntohl(lease.expires);
|
||||
- printf(" ");
|
||||
+ //expires = lease.expires;
|
||||
+ printf(" %-15s ",lease.hostname);
|
||||
if (mode == REMAINING) {
|
||||
if (!expires) printf("expired\n");
|
||||
else {
|
||||
diff -urN busybox-dist/networking/udhcp/files.c busybox/networking/udhcp/files.c
|
||||
--- busybox-dist/networking/udhcp/files.c 2004-03-15 02:29:00.000000000 -0600
|
||||
+++ busybox/networking/udhcp/files.c 2004-03-16 09:50:04.000000000 -0600
|
||||
@@ -281,7 +281,7 @@
|
||||
if (lease.yiaddr >= server_config.start && lease.yiaddr <= server_config.end) {
|
||||
lease.expires = ntohl(lease.expires);
|
||||
if (!server_config.remaining) lease.expires -= time(0);
|
||||
- if (!(add_lease(lease.chaddr, lease.yiaddr, lease.expires))) {
|
||||
+ if (!(add_lease(lease.hostname, lease.chaddr, lease.yiaddr, lease.expires))) {
|
||||
LOG(LOG_WARNING, "Too many leases while loading %s\n", file);
|
||||
break;
|
||||
}
|
||||
diff -urN busybox-dist/networking/udhcp/leases.c busybox/networking/udhcp/leases.c
|
||||
--- busybox-dist/networking/udhcp/leases.c 2004-03-15 02:29:00.000000000 -0600
|
||||
+++ busybox/networking/udhcp/leases.c 2004-03-16 09:50:04.000000000 -0600
|
||||
@@ -35,7 +35,7 @@
|
||||
|
||||
|
||||
/* add a lease into the table, clearing out any old ones */
|
||||
-struct dhcpOfferedAddr *add_lease(uint8_t *chaddr, uint32_t yiaddr, unsigned long lease)
|
||||
+struct dhcpOfferedAddr *add_lease(uint8_t *hostname, uint8_t *chaddr, uint32_t yiaddr, unsigned long lease)
|
||||
{
|
||||
struct dhcpOfferedAddr *oldest;
|
||||
|
||||
@@ -45,6 +45,13 @@
|
||||
oldest = oldest_expired_lease();
|
||||
|
||||
if (oldest) {
|
||||
+ if (hostname) {
|
||||
+ uint8_t length = *(hostname-1);
|
||||
+ if (length>15) length=15;
|
||||
+ memcpy(oldest->hostname,hostname,length);
|
||||
+ oldest->hostname[length]=0;
|
||||
+ }
|
||||
+
|
||||
memcpy(oldest->chaddr, chaddr, 16);
|
||||
oldest->yiaddr = yiaddr;
|
||||
oldest->expires = time(0) + lease;
|
||||
@@ -112,7 +119,7 @@
|
||||
temp.s_addr = addr;
|
||||
LOG(LOG_INFO, "%s belongs to someone, reserving it for %ld seconds",
|
||||
inet_ntoa(temp), server_config.conflict_time);
|
||||
- add_lease(blank_chaddr, addr, server_config.conflict_time);
|
||||
+ add_lease(blank_chaddr, blank_chaddr, addr, server_config.conflict_time);
|
||||
return 1;
|
||||
} else return 0;
|
||||
}
|
||||
diff -urN busybox-dist/networking/udhcp/leases.h busybox/networking/udhcp/leases.h
|
||||
--- busybox-dist/networking/udhcp/leases.h 2004-01-30 17:45:12.000000000 -0600
|
||||
+++ busybox/networking/udhcp/leases.h 2004-03-16 09:50:04.000000000 -0600
|
||||
@@ -4,6 +4,7 @@
|
||||
|
||||
|
||||
struct dhcpOfferedAddr {
|
||||
+ uint8_t hostname[16];
|
||||
uint8_t chaddr[16];
|
||||
uint32_t yiaddr; /* network order */
|
||||
uint32_t expires; /* host order */
|
||||
@@ -12,7 +13,7 @@
|
||||
extern uint8_t blank_chaddr[];
|
||||
|
||||
void clear_lease(uint8_t *chaddr, uint32_t yiaddr);
|
||||
-struct dhcpOfferedAddr *add_lease(uint8_t *chaddr, uint32_t yiaddr, unsigned long lease);
|
||||
+struct dhcpOfferedAddr *add_lease(uint8_t *hostname, uint8_t *chaddr, uint32_t yiaddr, unsigned long lease);
|
||||
int lease_expired(struct dhcpOfferedAddr *lease);
|
||||
struct dhcpOfferedAddr *oldest_expired_lease(void);
|
||||
struct dhcpOfferedAddr *find_lease_by_chaddr(uint8_t *chaddr);
|
||||
diff -urN busybox-dist/networking/udhcp/serverpacket.c busybox/networking/udhcp/serverpacket.c
|
||||
--- busybox-dist/networking/udhcp/serverpacket.c 2004-03-15 02:29:01.000000000 -0600
|
||||
+++ busybox/networking/udhcp/serverpacket.c 2004-03-16 09:51:36.000000000 -0600
|
||||
@@ -29,6 +29,7 @@
|
||||
#include "dhcpd.h"
|
||||
#include "options.h"
|
||||
#include "common.h"
|
||||
+#include "files.h"
|
||||
|
||||
/* send a packet to giaddr using the kernel ip stack */
|
||||
static int send_packet_to_relay(struct dhcpMessage *payload)
|
||||
@@ -152,7 +153,7 @@
|
||||
return -1;
|
||||
}
|
||||
|
||||
- if (!add_lease(packet.chaddr, packet.yiaddr, server_config.offer_time)) {
|
||||
+ if (!add_lease(get_option(oldpacket, DHCP_HOST_NAME), packet.chaddr, packet.yiaddr, server_config.offer_time)) {
|
||||
LOG(LOG_WARNING, "lease pool is full -- OFFER abandoned");
|
||||
return -1;
|
||||
}
|
||||
@@ -233,7 +234,9 @@
|
||||
if (send_packet(&packet, 0) < 0)
|
||||
return -1;
|
||||
|
||||
- add_lease(packet.chaddr, packet.yiaddr, lease_time_align);
|
||||
+ add_lease(get_option(oldpacket, DHCP_HOST_NAME), packet.chaddr, packet.yiaddr, lease_time_align);
|
||||
+
|
||||
+ write_leases();
|
||||
|
||||
return 0;
|
||||
}
|
File diff suppressed because it is too large
Load Diff
@ -1,163 +0,0 @@
|
||||
# When building a target filesystem, it is desirable to not have to
|
||||
# become root and then run 'mknod' a thousand times. Using a device
|
||||
# table you can create device nodes and directories "on the fly".
|
||||
#
|
||||
# This is a sample device table file for use with genext2fs. You can
|
||||
# do all sorts of interesting things with a device table file. For
|
||||
# example, if you want to adjust the permissions on a particular file
|
||||
# you can just add an entry like:
|
||||
# /sbin/foobar f 2755 0 0 - - - - -
|
||||
# and (assuming the file /sbin/foobar exists) it will be made setuid
|
||||
# root (regardless of what its permissions are on the host filesystem.
|
||||
# Furthermore, you can use a single table entry to create a many device
|
||||
# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15]
|
||||
# I could just use the following two table entries:
|
||||
# /dev/hda b 640 0 0 3 0 0 0 -
|
||||
# /dev/hda b 640 0 0 3 1 1 1 15
|
||||
#
|
||||
# Device table entries take the form of:
|
||||
# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
|
||||
# where name is the file name, type can be one of:
|
||||
# f A regular file
|
||||
# d Directory
|
||||
# c Character special device file
|
||||
# b Block special device file
|
||||
# p Fifo (named pipe)
|
||||
# uid is the user id for the target file, gid is the group id for the
|
||||
# target file. The rest of the entries (major, minor, etc) apply only
|
||||
# to device special files.
|
||||
|
||||
# Have fun
|
||||
# -Erik Andersen <andersen@codepoet.org>
|
||||
#
|
||||
|
||||
#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
|
||||
/dev d 755 0 0 - - - - -
|
||||
/dev d 755 0 0 - - - - -
|
||||
/dev/pts d 755 0 0 - - - - -
|
||||
/tmp d 1777 0 0 - - - - -
|
||||
/etc d 755 0 0 - - - - -
|
||||
/home/default d 2755 1000 1000 - - - - -
|
||||
/etc/network/if-up.d d 755 0 0 - - - - -
|
||||
/etc/network/if-pre-up.d d 755 0 0 - - - - -
|
||||
/etc/network/if-down.d d 755 0 0 - - - - -
|
||||
/etc/network/if-post-down.d d 755 0 0 - - - - -
|
||||
# Adjust permissions on some normal files
|
||||
/etc/shadow f 600 0 0 - - - - -
|
||||
/etc/passwd f 644 0 0 - - - - -
|
||||
/bin/busybox f 4755 0 0 - - - - -
|
||||
# uncomment this to allow starting x as non-root
|
||||
#/usr/X11R6/bin/Xfbdev f 4755 0 0 - - - - -
|
||||
|
||||
# Normal system devices
|
||||
/dev/mem c 640 0 0 1 1 0 0 -
|
||||
/dev/kmem c 640 0 0 1 2 0 0 -
|
||||
/dev/null c 666 0 0 1 3 0 0 -
|
||||
/dev/zero c 666 0 0 1 5 0 0 -
|
||||
/dev/random c 666 0 0 1 8 0 0 -
|
||||
/dev/urandom c 666 0 0 1 9 0 0 -
|
||||
/dev/ram b 640 0 0 1 1 0 0 -
|
||||
/dev/ram b 640 0 0 1 0 0 1 4
|
||||
/dev/loop b 640 0 0 7 0 0 1 2
|
||||
/dev/rtc c 640 0 0 10 135 - - -
|
||||
/dev/console c 666 0 0 5 1 - - -
|
||||
/dev/tty c 666 0 0 5 0 - - -
|
||||
/dev/tty c 666 0 0 4 0 0 1 8
|
||||
/dev/ttyp c 666 0 0 3 0 0 1 10
|
||||
/dev/ptyp c 666 0 0 2 0 0 1 10
|
||||
/dev/ptmx c 666 0 0 5 2 - - -
|
||||
/dev/ttyP c 666 0 0 57 0 0 1 4
|
||||
/dev/ttyS c 666 0 0 4 64 0 1 4
|
||||
/dev/fb c 640 0 5 29 0 0 32 4
|
||||
#/dev/ttySA c 666 0 0 204 5 0 1 3
|
||||
/dev/psaux c 666 0 0 10 1 0 0 -
|
||||
#/dev/ppp c 666 0 0 108 0 - - -
|
||||
|
||||
# MTD stuff
|
||||
/dev/mtd c 640 0 0 90 0 0 2 4
|
||||
/dev/mtdblock b 640 0 0 31 0 0 1 4
|
||||
|
||||
#Tun/tap driver
|
||||
/dev/net d 755 0 0 - - - - -
|
||||
/dev/net/tun c 660 0 0 10 200 - - -
|
||||
|
||||
# Audio stuff
|
||||
#/dev/audio c 666 0 29 14 4 - - -
|
||||
#/dev/audio1 c 666 0 29 14 20 - - -
|
||||
#/dev/dsp c 666 0 29 14 3 - - -
|
||||
#/dev/dsp1 c 666 0 29 14 19 - - -
|
||||
#/dev/sndstat c 666 0 29 14 6 - - -
|
||||
|
||||
# User-mode Linux stuff
|
||||
/dev/ubda b 640 0 0 98 0 0 0 -
|
||||
/dev/ubda b 640 0 0 98 1 1 1 15
|
||||
|
||||
# IDE Devices
|
||||
/dev/hda b 640 0 0 3 0 0 0 -
|
||||
/dev/hda b 640 0 0 3 1 1 1 15
|
||||
/dev/hdb b 640 0 0 3 64 0 0 -
|
||||
/dev/hdb b 640 0 0 3 65 1 1 15
|
||||
#/dev/hdc b 640 0 0 22 0 0 0 -
|
||||
#/dev/hdc b 640 0 0 22 1 1 1 15
|
||||
#/dev/hdd b 640 0 0 22 64 0 0 -
|
||||
#/dev/hdd b 640 0 0 22 65 1 1 15
|
||||
#/dev/hde b 640 0 0 33 0 0 0 -
|
||||
#/dev/hde b 640 0 0 33 1 1 1 15
|
||||
#/dev/hdf b 640 0 0 33 64 0 0 -
|
||||
#/dev/hdf b 640 0 0 33 65 1 1 15
|
||||
#/dev/hdg b 640 0 0 34 0 0 0 -
|
||||
#/dev/hdg b 640 0 0 34 1 1 1 15
|
||||
#/dev/hdh b 640 0 0 34 64 0 0 -
|
||||
#/dev/hdh b 640 0 0 34 65 1 1 15
|
||||
|
||||
# SCSI Devices
|
||||
#/dev/sda b 640 0 0 8 0 0 0 -
|
||||
#/dev/sda b 640 0 0 8 1 1 1 15
|
||||
#/dev/sdb b 640 0 0 8 16 0 0 -
|
||||
#/dev/sdb b 640 0 0 8 17 1 1 15
|
||||
#/dev/sdc b 640 0 0 8 32 0 0 -
|
||||
#/dev/sdc b 640 0 0 8 33 1 1 15
|
||||
#/dev/sdd b 640 0 0 8 48 0 0 -
|
||||
#/dev/sdd b 640 0 0 8 49 1 1 15
|
||||
#/dev/sde b 640 0 0 8 64 0 0 -
|
||||
#/dev/sde b 640 0 0 8 65 1 1 15
|
||||
#/dev/sdf b 640 0 0 8 80 0 0 -
|
||||
#/dev/sdf b 640 0 0 8 81 1 1 15
|
||||
#/dev/sdg b 640 0 0 8 96 0 0 -
|
||||
#/dev/sdg b 640 0 0 8 97 1 1 15
|
||||
#/dev/sdh b 640 0 0 8 112 0 0 -
|
||||
#/dev/sdh b 640 0 0 8 113 1 1 15
|
||||
#/dev/sg c 640 0 0 21 0 0 1 15
|
||||
#/dev/scd b 640 0 0 11 0 0 1 15
|
||||
#/dev/st c 640 0 0 9 0 0 1 8
|
||||
#/dev/nst c 640 0 0 9 128 0 1 8
|
||||
#/dev/st c 640 0 0 9 32 1 1 4
|
||||
#/dev/st c 640 0 0 9 64 1 1 4
|
||||
#/dev/st c 640 0 0 9 96 1 1 4
|
||||
|
||||
# Floppy disk devices
|
||||
#/dev/fd b 640 0 0 2 0 0 1 2
|
||||
#/dev/fd0d360 b 640 0 0 2 4 0 0 -
|
||||
#/dev/fd1d360 b 640 0 0 2 5 0 0 -
|
||||
#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
|
||||
#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
|
||||
#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
|
||||
#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
|
||||
#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
|
||||
#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
|
||||
|
||||
# All the proprietary cdrom devices in the world
|
||||
#/dev/aztcd b 640 0 0 29 0 0 0 -
|
||||
#/dev/bpcd b 640 0 0 41 0 0 0 -
|
||||
#/dev/capi20 c 640 0 0 68 0 0 1 2
|
||||
#/dev/cdu31a b 640 0 0 15 0 0 0 -
|
||||
#/dev/cdu535 b 640 0 0 24 0 0 0 -
|
||||
#/dev/cm206cd b 640 0 0 32 0 0 0 -
|
||||
#/dev/sjcd b 640 0 0 18 0 0 0 -
|
||||
#/dev/sonycd b 640 0 0 15 0 0 0 -
|
||||
#/dev/gscd b 640 0 0 16 0 0 0 -
|
||||
#/dev/sbpcd b 640 0 0 25 0 0 0 -
|
||||
#/dev/sbpcd b 640 0 0 25 0 0 1 4
|
||||
#/dev/mcd b 640 0 0 23 0 0 0 -
|
||||
#/dev/optcd b 640 0 0 17 0 0 0 -
|
||||
|
@ -1,219 +0,0 @@
|
||||
diff -x CVS -urN dnsmasq-1.18/dhcp.c dnsmasq.old/dhcp.c
|
||||
--- dnsmasq-1.18/dhcp.c 2003-11-05 08:30:20.000000000 -0600
|
||||
+++ dnsmasq.old/dhcp.c 2004-01-05 23:40:11.000000000 -0600
|
||||
@@ -15,14 +15,20 @@
|
||||
|
||||
#include "dnsmasq.h"
|
||||
|
||||
-static int next_token (char *token, int buffsize, FILE * fp);
|
||||
+struct dhcpOfferedAddr {
|
||||
+ u_int8_t hostname[16];
|
||||
+ u_int8_t chaddr[16];
|
||||
+ u_int32_t yiaddr; /* network order */
|
||||
+ u_int32_t expires; /* host order */
|
||||
+};
|
||||
|
||||
void load_dhcp(char *file, char *suffix, time_t now, char *hostname)
|
||||
{
|
||||
- char token[MAXTOK], *dot;
|
||||
+ char *dot;
|
||||
struct all_addr host_address;
|
||||
- time_t ttd, tts;
|
||||
+ time_t ttd;
|
||||
FILE *fp = fopen (file, "r");
|
||||
+ struct dhcpOfferedAddr lease;
|
||||
|
||||
if (!fp)
|
||||
{
|
||||
@@ -34,154 +40,45 @@
|
||||
|
||||
/* remove all existing DHCP cache entries */
|
||||
cache_unhash_dhcp();
|
||||
-
|
||||
- while ((next_token(token, MAXTOK, fp)))
|
||||
- {
|
||||
- if (strcmp(token, "lease") == 0)
|
||||
- {
|
||||
- hostname[0] = '\0';
|
||||
- ttd = tts = (time_t)(-1);
|
||||
-#ifdef HAVE_IPV6
|
||||
- if (next_token(token, MAXTOK, fp) &&
|
||||
- inet_pton(AF_INET, token, &host_address))
|
||||
-#else
|
||||
- if (next_token(token, MAXTOK, fp) &&
|
||||
- (host_address.addr4.s_addr = inet_addr(token)) != (in_addr_t) -1)
|
||||
-#endif
|
||||
- {
|
||||
- if (next_token(token, MAXTOK, fp) && *token == '{')
|
||||
- {
|
||||
- while (next_token(token, MAXTOK, fp) && *token != '}')
|
||||
+
|
||||
+ while (fread(&lease, sizeof(lease), 1, fp)) {
|
||||
+ host_address.addr.addr4.s_addr = lease.yiaddr;
|
||||
+
|
||||
+ strcpy(hostname,lease.hostname);
|
||||
+ if (lease.expires>(unsigned)now)
|
||||
+ ttd = lease.expires;
|
||||
+ else
|
||||
+ ttd = -1;
|
||||
+ dot = strchr(hostname, '.');
|
||||
+ if (suffix)
|
||||
{
|
||||
- if ((strcmp(token, "client-hostname") == 0) ||
|
||||
- (strcmp(token, "hostname") == 0))
|
||||
- {
|
||||
- if (next_token(hostname, MAXDNAME, fp))
|
||||
- if (!canonicalise(hostname))
|
||||
- {
|
||||
- *hostname = 0;
|
||||
- syslog(LOG_ERR, "bad name in %s", file);
|
||||
- }
|
||||
- }
|
||||
- else if ((strcmp(token, "ends") == 0) ||
|
||||
- (strcmp(token, "starts") == 0))
|
||||
- {
|
||||
- struct tm lease_time;
|
||||
- int is_ends = (strcmp(token, "ends") == 0);
|
||||
- if (next_token(token, MAXTOK, fp) && /* skip weekday */
|
||||
- next_token(token, MAXTOK, fp) && /* Get date from lease file */
|
||||
- sscanf (token, "%d/%d/%d",
|
||||
- &lease_time.tm_year,
|
||||
- &lease_time.tm_mon,
|
||||
- &lease_time.tm_mday) == 3 &&
|
||||
- next_token(token, MAXTOK, fp) &&
|
||||
- sscanf (token, "%d:%d:%d:",
|
||||
- &lease_time.tm_hour,
|
||||
- &lease_time.tm_min,
|
||||
- &lease_time.tm_sec) == 3)
|
||||
- {
|
||||
- /* There doesn't seem to be a universally available library function
|
||||
- which converts broken-down _GMT_ time to seconds-in-epoch.
|
||||
- The following was borrowed from ISC dhcpd sources, where
|
||||
- it is noted that it might not be entirely accurate for odd seconds.
|
||||
- Since we're trying to get the same answer as dhcpd, that's just
|
||||
- fine here. */
|
||||
- static int months [11] = { 31, 59, 90, 120, 151, 181,
|
||||
- 212, 243, 273, 304, 334 };
|
||||
- time_t time = ((((((365 * (lease_time.tm_year - 1970) + /* Days in years since '70 */
|
||||
- (lease_time.tm_year - 1969) / 4 + /* Leap days since '70 */
|
||||
- (lease_time.tm_mon > 1 /* Days in months this year */
|
||||
- ? months [lease_time.tm_mon - 2]
|
||||
- : 0) +
|
||||
- (lease_time.tm_mon > 2 && /* Leap day this year */
|
||||
- !((lease_time.tm_year - 1972) & 3)) +
|
||||
- lease_time.tm_mday - 1) * 24) + /* Day of month */
|
||||
- lease_time.tm_hour) * 60) +
|
||||
- lease_time.tm_min) * 60) + lease_time.tm_sec;
|
||||
- if (is_ends)
|
||||
- ttd = time;
|
||||
- else
|
||||
- tts = time; }
|
||||
+ if (dot)
|
||||
+ { /* suffix and lease has ending: must match */
|
||||
+ if (strcmp(dot+1, suffix) != 0)
|
||||
+ syslog(LOG_WARNING,
|
||||
+ "Ignoring DHCP lease for %s because it has an illegal domain part", hostname);
|
||||
+ else
|
||||
+ cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
|
||||
}
|
||||
- }
|
||||
-
|
||||
- /* missing info? */
|
||||
- if (!*hostname)
|
||||
- continue;
|
||||
- if (ttd == (time_t)(-1))
|
||||
- continue;
|
||||
-
|
||||
- /* infinite lease to is represented by -1 */
|
||||
- /* This makes is to the lease file as
|
||||
- start time one less than end time. */
|
||||
- /* We use -1 as infinite in ttd */
|
||||
- if ((tts != -1) && (ttd == tts - 1))
|
||||
- ttd = (time_t)(-1);
|
||||
- else if (ttd < now)
|
||||
- continue;
|
||||
-
|
||||
- dot = strchr(hostname, '.');
|
||||
- if (suffix)
|
||||
- {
|
||||
- if (dot)
|
||||
- { /* suffix and lease has ending: must match */
|
||||
- if (strcmp(dot+1, suffix) != 0)
|
||||
- syslog(LOG_WARNING,
|
||||
- "Ignoring DHCP lease for %s because it has an illegal domain part", hostname);
|
||||
- else
|
||||
- cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
|
||||
- }
|
||||
- else
|
||||
- { /* suffix exists but lease has no ending - add lease and lease.suffix */
|
||||
- cache_add_dhcp_entry(hostname, &host_address, ttd, 0);
|
||||
- strncat(hostname, ".", MAXDNAME);
|
||||
- strncat(hostname, suffix, MAXDNAME);
|
||||
- hostname[MAXDNAME-1] = 0; /* in case strncat hit limit */
|
||||
- /* Make FQDN canonical for reverse lookups */
|
||||
- cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
|
||||
- }
|
||||
- }
|
||||
- else
|
||||
- { /* no suffix */
|
||||
- if (dot) /* no lease ending allowed */
|
||||
- syslog(LOG_WARNING,
|
||||
- "Ignoring DHCP lease for %s because it has a domain part", hostname);
|
||||
- else
|
||||
- cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
|
||||
- }
|
||||
- }
|
||||
- }
|
||||
- }
|
||||
- }
|
||||
+ else
|
||||
+ { /* suffix exists but lease has no ending - add lease and lease.suffix */
|
||||
+ cache_add_dhcp_entry(hostname, &host_address, ttd, 0);
|
||||
+ strncat(hostname, ".", MAXDNAME);
|
||||
+ strncat(hostname, suffix, MAXDNAME);
|
||||
+ hostname[MAXDNAME-1] = 0; /* in case strncat hit limit */
|
||||
+ /* Make FQDN canonical for reverse lookups */
|
||||
+ cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
|
||||
+ }
|
||||
+ }
|
||||
+ else
|
||||
+ { /* no suffix */
|
||||
+ if (dot) /* no lease ending allowed */
|
||||
+ syslog(LOG_WARNING,
|
||||
+ "Ignoring DHCP lease for %s because it has a domain part", hostname);
|
||||
+ else
|
||||
+ cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
|
||||
+ }
|
||||
+ }
|
||||
fclose(fp);
|
||||
|
||||
}
|
||||
-
|
||||
-static int next_token (char *token, int buffsize, FILE * fp)
|
||||
-{
|
||||
- int c, count = 0;
|
||||
- char *cp = token;
|
||||
-
|
||||
- while((c = getc(fp)) != EOF)
|
||||
- {
|
||||
- if (c == '#')
|
||||
- do { c = getc(fp); } while (c != '\n' && c != EOF);
|
||||
-
|
||||
- if (c == ' ' || c == '\t' || c == '\n' || c == ';')
|
||||
- {
|
||||
- if (count)
|
||||
- break;
|
||||
- }
|
||||
- else if ((c != '"') && (count<buffsize-1))
|
||||
- {
|
||||
- *cp++ = c;
|
||||
- count++;
|
||||
- }
|
||||
- }
|
||||
-
|
||||
- *cp = 0;
|
||||
- return count ? 1 : 0;
|
||||
-}
|
||||
-
|
||||
-
|
||||
-
|
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -1,877 +0,0 @@
|
||||
#
|
||||
# Automatically generated make config: don't edit
|
||||
#
|
||||
CONFIG_X86=y
|
||||
# CONFIG_SBUS is not set
|
||||
CONFIG_UID16=y
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
CONFIG_KMOD=y
|
||||
|
||||
#
|
||||
# Processor type and features
|
||||
#
|
||||
# CONFIG_M386 is not set
|
||||
# CONFIG_M486 is not set
|
||||
# CONFIG_M586 is not set
|
||||
# CONFIG_M586TSC is not set
|
||||
# CONFIG_M586MMX is not set
|
||||
# CONFIG_M686 is not set
|
||||
# CONFIG_MPENTIUMIII is not set
|
||||
# CONFIG_MPENTIUM4 is not set
|
||||
# CONFIG_MK6 is not set
|
||||
# CONFIG_MK7 is not set
|
||||
# CONFIG_MK8 is not set
|
||||
CONFIG_MELAN=y
|
||||
# CONFIG_MCRUSOE is not set
|
||||
# CONFIG_MWINCHIPC6 is not set
|
||||
# CONFIG_MWINCHIP2 is not set
|
||||
# CONFIG_MWINCHIP3D is not set
|
||||
# CONFIG_MCYRIXIII is not set
|
||||
# CONFIG_MVIAC3_2 is not set
|
||||
CONFIG_X86_WP_WORKS_OK=y
|
||||
CONFIG_X86_INVLPG=y
|
||||
CONFIG_X86_CMPXCHG=y
|
||||
CONFIG_X86_XADD=y
|
||||
CONFIG_X86_BSWAP=y
|
||||
CONFIG_X86_POPAD_OK=y
|
||||
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
|
||||
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||
CONFIG_X86_L1_CACHE_SHIFT=4
|
||||
CONFIG_X86_USE_STRING_486=y
|
||||
CONFIG_X86_ALIGNMENT_16=y
|
||||
CONFIG_X86_F00F_WORKS_OK=y
|
||||
# CONFIG_X86_MCE is not set
|
||||
# CONFIG_TOSHIBA is not set
|
||||
# CONFIG_I8K is not set
|
||||
# CONFIG_MICROCODE is not set
|
||||
# CONFIG_X86_MSR is not set
|
||||
# CONFIG_X86_CPUID is not set
|
||||
# CONFIG_EDD is not set
|
||||
CONFIG_NOHIGHMEM=y
|
||||
# CONFIG_HIGHMEM4G is not set
|
||||
# CONFIG_HIGHMEM64G is not set
|
||||
# CONFIG_HIGHMEM is not set
|
||||
CONFIG_MATH_EMULATION=y
|
||||
CONFIG_MTRR=y
|
||||
# CONFIG_SMP is not set
|
||||
# CONFIG_X86_UP_APIC is not set
|
||||
# CONFIG_X86_UP_IOAPIC is not set
|
||||
# CONFIG_X86_TSC_DISABLE is not set
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_NET=y
|
||||
CONFIG_PCI=y
|
||||
# CONFIG_PCI_GOBIOS is not set
|
||||
# CONFIG_PCI_GODIRECT is not set
|
||||
CONFIG_PCI_GOANY=y
|
||||
CONFIG_PCI_BIOS=y
|
||||
CONFIG_PCI_DIRECT=y
|
||||
CONFIG_ISA=y
|
||||
CONFIG_PCI_NAMES=y
|
||||
CONFIG_EISA=y
|
||||
CONFIG_MCA=y
|
||||
CONFIG_HOTPLUG=y
|
||||
|
||||
#
|
||||
# PCMCIA/CardBus support
|
||||
#
|
||||
CONFIG_PCMCIA=m
|
||||
CONFIG_CARDBUS=y
|
||||
CONFIG_TCIC=y
|
||||
CONFIG_I82092=y
|
||||
CONFIG_I82365=y
|
||||
|
||||
#
|
||||
# PCI Hotplug Support
|
||||
#
|
||||
CONFIG_HOTPLUG_PCI=y
|
||||
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
|
||||
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
CONFIG_SYSCTL=y
|
||||
CONFIG_KCORE_ELF=y
|
||||
# CONFIG_KCORE_AOUT is not set
|
||||
# CONFIG_BINFMT_AOUT is not set
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
# CONFIG_OOM_KILLER is not set
|
||||
CONFIG_PM=y
|
||||
CONFIG_APM=y
|
||||
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
|
||||
CONFIG_APM_DO_ENABLE=y
|
||||
# CONFIG_APM_CPU_IDLE is not set
|
||||
# CONFIG_APM_DISPLAY_BLANK is not set
|
||||
CONFIG_APM_RTC_IS_GMT=y
|
||||
CONFIG_APM_ALLOW_INTS=y
|
||||
CONFIG_APM_REAL_MODE_POWER_OFF=y
|
||||
|
||||
#
|
||||
# ACPI Support
|
||||
#
|
||||
# CONFIG_ACPI is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
# CONFIG_MTD is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play configuration
|
||||
#
|
||||
# CONFIG_PNP is not set
|
||||
# CONFIG_ISAPNP is not set
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_DEV_FD is not set
|
||||
# CONFIG_BLK_DEV_PS2 is not set
|
||||
# CONFIG_BLK_DEV_XD is not set
|
||||
# CONFIG_PARIDE is not set
|
||||
# CONFIG_BLK_CPQ_DA is not set
|
||||
# CONFIG_BLK_CPQ_CISS_DA is not set
|
||||
# CONFIG_CISS_SCSI_TAPE is not set
|
||||
# CONFIG_CISS_MONITOR_THREAD is not set
|
||||
# CONFIG_BLK_DEV_DAC960 is not set
|
||||
# CONFIG_BLK_DEV_UMEM is not set
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
# CONFIG_BLK_STATS is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
# CONFIG_BLK_DEV_MD is not set
|
||||
# CONFIG_MD_LINEAR is not set
|
||||
# CONFIG_MD_RAID0 is not set
|
||||
# CONFIG_MD_RAID1 is not set
|
||||
# CONFIG_MD_RAID5 is not set
|
||||
# CONFIG_MD_MULTIPATH is not set
|
||||
# CONFIG_BLK_DEV_LVM is not set
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
CONFIG_PACKET=y
|
||||
# CONFIG_PACKET_MMAP is not set
|
||||
CONFIG_NETLINK_DEV=y
|
||||
CONFIG_NETFILTER=y
|
||||
# CONFIG_NETFILTER_DEBUG is not set
|
||||
CONFIG_FILTER=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
CONFIG_IP_ADVANCED_ROUTER=y
|
||||
CONFIG_IP_MULTIPLE_TABLES=y
|
||||
CONFIG_IP_ROUTE_FWMARK=y
|
||||
CONFIG_IP_ROUTE_NAT=y
|
||||
CONFIG_IP_ROUTE_MULTIPATH=y
|
||||
CONFIG_IP_ROUTE_TOS=y
|
||||
# CONFIG_IP_ROUTE_VERBOSE is not set
|
||||
# CONFIG_IP_PNP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
CONFIG_INET_ECN=y
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
|
||||
#
|
||||
# IP: Netfilter Configuration
|
||||
#
|
||||
CONFIG_IP_NF_CONNTRACK=y
|
||||
CONFIG_IP_NF_FTP=y
|
||||
# CONFIG_IP_NF_AMANDA is not set
|
||||
CONFIG_IP_NF_TFTP=y
|
||||
CONFIG_IP_NF_IRC=y
|
||||
CONFIG_IP_NF_QUEUE=y
|
||||
CONFIG_IP_NF_IPTABLES=y
|
||||
CONFIG_IP_NF_MATCH_LIMIT=y
|
||||
CONFIG_IP_NF_MATCH_MAC=y
|
||||
CONFIG_IP_NF_MATCH_PKTTYPE=y
|
||||
CONFIG_IP_NF_MATCH_MARK=y
|
||||
CONFIG_IP_NF_MATCH_MULTIPORT=y
|
||||
CONFIG_IP_NF_MATCH_TOS=y
|
||||
CONFIG_IP_NF_MATCH_RECENT=y
|
||||
CONFIG_IP_NF_MATCH_ECN=y
|
||||
CONFIG_IP_NF_MATCH_DSCP=y
|
||||
CONFIG_IP_NF_MATCH_AH_ESP=y
|
||||
CONFIG_IP_NF_MATCH_LENGTH=y
|
||||
CONFIG_IP_NF_MATCH_TTL=y
|
||||
CONFIG_IP_NF_MATCH_TCPMSS=y
|
||||
CONFIG_IP_NF_MATCH_HELPER=y
|
||||
CONFIG_IP_NF_MATCH_STATE=y
|
||||
CONFIG_IP_NF_MATCH_CONNTRACK=y
|
||||
CONFIG_IP_NF_MATCH_UNCLEAN=y
|
||||
CONFIG_IP_NF_MATCH_OWNER=y
|
||||
CONFIG_IP_NF_FILTER=y
|
||||
CONFIG_IP_NF_TARGET_REJECT=y
|
||||
CONFIG_IP_NF_TARGET_MIRROR=y
|
||||
CONFIG_IP_NF_NAT=y
|
||||
CONFIG_IP_NF_NAT_NEEDED=y
|
||||
CONFIG_IP_NF_TARGET_MASQUERADE=y
|
||||
CONFIG_IP_NF_TARGET_REDIRECT=y
|
||||
CONFIG_IP_NF_NAT_LOCAL=y
|
||||
CONFIG_IP_NF_NAT_SNMP_BASIC=y
|
||||
CONFIG_IP_NF_NAT_IRC=y
|
||||
CONFIG_IP_NF_NAT_FTP=y
|
||||
CONFIG_IP_NF_NAT_TFTP=y
|
||||
CONFIG_IP_NF_MANGLE=y
|
||||
CONFIG_IP_NF_TARGET_TOS=y
|
||||
CONFIG_IP_NF_TARGET_ECN=y
|
||||
CONFIG_IP_NF_TARGET_DSCP=y
|
||||
CONFIG_IP_NF_TARGET_MARK=y
|
||||
CONFIG_IP_NF_TARGET_LOG=y
|
||||
CONFIG_IP_NF_TARGET_ULOG=y
|
||||
CONFIG_IP_NF_TARGET_TCPMSS=y
|
||||
CONFIG_IP_NF_ARPTABLES=y
|
||||
CONFIG_IP_NF_ARPFILTER=y
|
||||
CONFIG_IP_NF_ARP_MANGLE=y
|
||||
|
||||
#
|
||||
# IP: Virtual Server Configuration
|
||||
#
|
||||
# CONFIG_IP_VS is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_KHTTPD is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
CONFIG_IPV6_SCTP__=y
|
||||
# CONFIG_IP_SCTP is not set
|
||||
# CONFIG_SCTP_HMAC_NONE is not set
|
||||
CONFIG_SCTP_HMAC_SHA1=y
|
||||
# CONFIG_SCTP_HMAC_MD5 is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
|
||||
#
|
||||
#
|
||||
#
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
|
||||
#
|
||||
# Appletalk devices
|
||||
#
|
||||
# CONFIG_DEV_APPLETALK is not set
|
||||
# CONFIG_DECNET is not set
|
||||
CONFIG_BRIDGE=y
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_LLC is not set
|
||||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
# CONFIG_NET_FASTROUTE is not set
|
||||
# CONFIG_NET_HW_FLOWCONTROL is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
CONFIG_NET_SCHED=y
|
||||
CONFIG_NET_SCH_CBQ=y
|
||||
CONFIG_NET_SCH_HTB=y
|
||||
CONFIG_NET_SCH_CSZ=y
|
||||
CONFIG_NET_SCH_HFSC=y
|
||||
CONFIG_NET_SCH_PRIO=y
|
||||
CONFIG_NET_SCH_RED=y
|
||||
CONFIG_NET_SCH_SFQ=y
|
||||
CONFIG_NET_SCH_TEQL=y
|
||||
CONFIG_NET_SCH_TBF=y
|
||||
CONFIG_NET_SCH_GRED=y
|
||||
CONFIG_NET_SCH_DSMARK=y
|
||||
CONFIG_NET_SCH_INGRESS=y
|
||||
CONFIG_NET_QOS=y
|
||||
CONFIG_NET_ESTIMATOR=y
|
||||
CONFIG_NET_CLS=y
|
||||
CONFIG_NET_CLS_TCINDEX=y
|
||||
CONFIG_NET_CLS_ROUTE4=y
|
||||
CONFIG_NET_CLS_ROUTE=y
|
||||
CONFIG_NET_CLS_FW=y
|
||||
CONFIG_NET_CLS_U32=y
|
||||
CONFIG_NET_CLS_RSVP=y
|
||||
CONFIG_NET_CLS_RSVP6=y
|
||||
CONFIG_NET_CLS_POLICE=y
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
|
||||
#
|
||||
# Telephony Support
|
||||
#
|
||||
# CONFIG_PHONE is not set
|
||||
# CONFIG_PHONE_IXJ is not set
|
||||
# CONFIG_PHONE_IXJ_PCMCIA is not set
|
||||
|
||||
#
|
||||
# ATA/IDE/MFM/RLL support
|
||||
#
|
||||
CONFIG_IDE=y
|
||||
|
||||
#
|
||||
# IDE, ATA and ATAPI Block devices
|
||||
#
|
||||
CONFIG_BLK_DEV_IDE=y
|
||||
|
||||
#
|
||||
# Please see Documentation/ide.txt for help/info on IDE drives
|
||||
#
|
||||
# CONFIG_BLK_DEV_HD_IDE is not set
|
||||
# CONFIG_BLK_DEV_HD is not set
|
||||
CONFIG_BLK_DEV_IDEDISK=y
|
||||
CONFIG_IDEDISK_MULTI_MODE=y
|
||||
CONFIG_IDEDISK_STROKE=y
|
||||
CONFIG_BLK_DEV_IDECS=m
|
||||
# CONFIG_BLK_DEV_IDECD is not set
|
||||
# CONFIG_BLK_DEV_IDETAPE is not set
|
||||
# CONFIG_BLK_DEV_IDEFLOPPY is not set
|
||||
# CONFIG_BLK_DEV_IDESCSI is not set
|
||||
# CONFIG_IDE_TASK_IOCTL is not set
|
||||
|
||||
#
|
||||
# IDE chipset support/bugfixes
|
||||
#
|
||||
# CONFIG_BLK_DEV_CMD640 is not set
|
||||
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
|
||||
# CONFIG_BLK_DEV_ISAPNP is not set
|
||||
CONFIG_BLK_DEV_IDEPCI=y
|
||||
CONFIG_BLK_DEV_GENERIC=y
|
||||
CONFIG_IDEPCI_SHARE_IRQ=y
|
||||
CONFIG_BLK_DEV_IDEDMA_PCI=y
|
||||
# CONFIG_BLK_DEV_OFFBOARD is not set
|
||||
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
|
||||
CONFIG_IDEDMA_PCI_AUTO=y
|
||||
# CONFIG_IDEDMA_ONLYDISK is not set
|
||||
CONFIG_BLK_DEV_IDEDMA=y
|
||||
CONFIG_IDEDMA_PCI_WIP=y
|
||||
# CONFIG_BLK_DEV_ADMA100 is not set
|
||||
# CONFIG_BLK_DEV_AEC62XX is not set
|
||||
# CONFIG_BLK_DEV_ALI15X3 is not set
|
||||
# CONFIG_WDC_ALI15X3 is not set
|
||||
# CONFIG_BLK_DEV_AMD74XX is not set
|
||||
# CONFIG_AMD74XX_OVERRIDE is not set
|
||||
# CONFIG_BLK_DEV_CMD64X is not set
|
||||
# CONFIG_BLK_DEV_TRIFLEX is not set
|
||||
# CONFIG_BLK_DEV_CY82C693 is not set
|
||||
# CONFIG_BLK_DEV_CS5530 is not set
|
||||
# CONFIG_BLK_DEV_HPT34X is not set
|
||||
# CONFIG_HPT34X_AUTODMA is not set
|
||||
# CONFIG_BLK_DEV_HPT366 is not set
|
||||
# CONFIG_BLK_DEV_PIIX is not set
|
||||
# CONFIG_BLK_DEV_NS87415 is not set
|
||||
# CONFIG_BLK_DEV_OPTI621 is not set
|
||||
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
|
||||
# CONFIG_PDC202XX_BURST is not set
|
||||
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
|
||||
# CONFIG_BLK_DEV_RZ1000 is not set
|
||||
# CONFIG_BLK_DEV_SC1200 is not set
|
||||
# CONFIG_BLK_DEV_SVWKS is not set
|
||||
# CONFIG_BLK_DEV_SIIMAGE is not set
|
||||
# CONFIG_BLK_DEV_SIS5513 is not set
|
||||
# CONFIG_BLK_DEV_SLC90E66 is not set
|
||||
# CONFIG_BLK_DEV_TRM290 is not set
|
||||
# CONFIG_BLK_DEV_VIA82CXXX is not set
|
||||
# CONFIG_IDE_CHIPSETS is not set
|
||||
CONFIG_IDEDMA_AUTO=y
|
||||
# CONFIG_IDEDMA_IVB is not set
|
||||
# CONFIG_DMA_NONPCI is not set
|
||||
# CONFIG_BLK_DEV_ATARAID is not set
|
||||
# CONFIG_BLK_DEV_ATARAID_PDC is not set
|
||||
# CONFIG_BLK_DEV_ATARAID_HPT is not set
|
||||
# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
|
||||
# CONFIG_BLK_DEV_ATARAID_SII is not set
|
||||
|
||||
#
|
||||
# SCSI support
|
||||
#
|
||||
# CONFIG_SCSI is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
# CONFIG_FUSION is not set
|
||||
# CONFIG_FUSION_BOOT is not set
|
||||
# CONFIG_FUSION_ISENSE is not set
|
||||
# CONFIG_FUSION_CTL is not set
|
||||
# CONFIG_FUSION_LAN is not set
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IEEE1394 is not set
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
# CONFIG_I2O is not set
|
||||
# CONFIG_I2O_PCI is not set
|
||||
# CONFIG_I2O_BLOCK is not set
|
||||
# CONFIG_I2O_LAN is not set
|
||||
# CONFIG_I2O_SCSI is not set
|
||||
# CONFIG_I2O_PROC is not set
|
||||
|
||||
#
|
||||
# Network device support
|
||||
#
|
||||
CONFIG_NETDEVICES=y
|
||||
|
||||
#
|
||||
# ARCnet devices
|
||||
#
|
||||
# CONFIG_ARCNET is not set
|
||||
CONFIG_DUMMY=m
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
CONFIG_TUN=y
|
||||
# CONFIG_ETHERTAP is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
# CONFIG_SUNLANCE is not set
|
||||
# CONFIG_HAPPYMEAL is not set
|
||||
# CONFIG_SUNBMAC is not set
|
||||
# CONFIG_SUNQE is not set
|
||||
# CONFIG_SUNGEM is not set
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
# CONFIG_LANCE is not set
|
||||
# CONFIG_NET_VENDOR_SMC is not set
|
||||
# CONFIG_NET_VENDOR_RACAL is not set
|
||||
# CONFIG_AT1700 is not set
|
||||
# CONFIG_DEPCA is not set
|
||||
# CONFIG_HP100 is not set
|
||||
# CONFIG_NET_ISA is not set
|
||||
# CONFIG_SKMC is not set
|
||||
# CONFIG_NE2_MCA is not set
|
||||
# CONFIG_IBMLANA is not set
|
||||
CONFIG_NET_PCI=y
|
||||
# CONFIG_PCNET32 is not set
|
||||
# CONFIG_AMD8111_ETH is not set
|
||||
# CONFIG_ADAPTEC_STARFIRE is not set
|
||||
# CONFIG_AC3200 is not set
|
||||
# CONFIG_APRICOT is not set
|
||||
# CONFIG_B44 is not set
|
||||
# CONFIG_CS89x0 is not set
|
||||
# CONFIG_TULIP is not set
|
||||
# CONFIG_DE4X5 is not set
|
||||
# CONFIG_DGRS is not set
|
||||
# CONFIG_DM9102 is not set
|
||||
# CONFIG_EEPRO100 is not set
|
||||
# CONFIG_EEPRO100_PIO is not set
|
||||
# CONFIG_E100 is not set
|
||||
# CONFIG_LNE390 is not set
|
||||
# CONFIG_FEALNX is not set
|
||||
CONFIG_NATSEMI=y
|
||||
# CONFIG_NE2K_PCI is not set
|
||||
# CONFIG_FORCEDETH is not set
|
||||
# CONFIG_NE3210 is not set
|
||||
# CONFIG_ES3210 is not set
|
||||
# CONFIG_8139CP is not set
|
||||
# CONFIG_8139TOO is not set
|
||||
# CONFIG_8139TOO_PIO is not set
|
||||
# CONFIG_8139TOO_TUNE_TWISTER is not set
|
||||
# CONFIG_8139TOO_8129 is not set
|
||||
# CONFIG_8139_OLD_RX_RESET is not set
|
||||
# CONFIG_SIS900 is not set
|
||||
# CONFIG_EPIC100 is not set
|
||||
# CONFIG_SUNDANCE is not set
|
||||
# CONFIG_SUNDANCE_MMIO is not set
|
||||
# CONFIG_TLAN is not set
|
||||
# CONFIG_VIA_RHINE is not set
|
||||
# CONFIG_VIA_RHINE_MMIO is not set
|
||||
# CONFIG_WINBOND_840 is not set
|
||||
# CONFIG_NET_POCKET is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
# CONFIG_ACENIC is not set
|
||||
# CONFIG_DL2K is not set
|
||||
# CONFIG_E1000 is not set
|
||||
# CONFIG_MYRI_SBUS is not set
|
||||
# CONFIG_NS83820 is not set
|
||||
# CONFIG_HAMACHI is not set
|
||||
# CONFIG_YELLOWFIN is not set
|
||||
# CONFIG_R8169 is not set
|
||||
# CONFIG_SK98LIN is not set
|
||||
# CONFIG_TIGON3 is not set
|
||||
# CONFIG_FDDI is not set
|
||||
# CONFIG_HIPPI is not set
|
||||
# CONFIG_PLIP is not set
|
||||
# CONFIG_PPP is not set
|
||||
# CONFIG_SLIP is not set
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
#
|
||||
CONFIG_NET_RADIO=y
|
||||
# CONFIG_STRIP is not set
|
||||
# CONFIG_WAVELAN is not set
|
||||
# CONFIG_ARLAN is not set
|
||||
# CONFIG_AIRONET4500 is not set
|
||||
# CONFIG_AIRONET4500_NONCS is not set
|
||||
# CONFIG_AIRONET4500_PROC is not set
|
||||
# CONFIG_AIRO is not set
|
||||
CONFIG_HERMES=m
|
||||
CONFIG_HOSTAP=m
|
||||
# CONFIG_PLX_HERMES is not set
|
||||
# CONFIG_TMD_HERMES is not set
|
||||
# CONFIG_PCI_HERMES is not set
|
||||
# CONFIG_HOSTAP_PLX is not set
|
||||
# CONFIG_HOSTAP_PCI is not set
|
||||
|
||||
#
|
||||
# Wireless Pcmcia cards support
|
||||
#
|
||||
CONFIG_PCMCIA_HERMES=m
|
||||
CONFIG_HOSTAP_CS=m
|
||||
# CONFIG_AIRO_CS is not set
|
||||
# CONFIG_PCMCIA_ATMEL is not set
|
||||
CONFIG_NET_WIRELESS=y
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
# CONFIG_TR is not set
|
||||
# CONFIG_NET_FC is not set
|
||||
# CONFIG_RCPCI is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
|
||||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
# CONFIG_WAN is not set
|
||||
|
||||
#
|
||||
# PCMCIA network device support
|
||||
#
|
||||
# CONFIG_NET_PCMCIA is not set
|
||||
|
||||
#
|
||||
# Amateur Radio support
|
||||
#
|
||||
# CONFIG_HAMRADIO is not set
|
||||
|
||||
#
|
||||
# IrDA (infrared) support
|
||||
#
|
||||
# CONFIG_IRDA is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Old CD-ROM drivers (not SCSI, not IDE)
|
||||
#
|
||||
# CONFIG_CD_NO_IDESCSI is not set
|
||||
|
||||
#
|
||||
# Input core support
|
||||
#
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_INPUT_KEYBDEV is not set
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_UINPUT is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_SERIAL=y
|
||||
CONFIG_SERIAL_CONSOLE=y
|
||||
# CONFIG_SERIAL_EXTENDED is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_UNIX98_PTY_COUNT=256
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
#
|
||||
# Mice
|
||||
#
|
||||
# CONFIG_BUSMOUSE is not set
|
||||
# CONFIG_MOUSE is not set
|
||||
|
||||
#
|
||||
# Joysticks
|
||||
#
|
||||
# CONFIG_INPUT_GAMEPORT is not set
|
||||
|
||||
#
|
||||
# Input core support is needed for gameports
|
||||
#
|
||||
|
||||
#
|
||||
# Input core support is needed for joysticks
|
||||
#
|
||||
# CONFIG_QIC02_TAPE is not set
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
# CONFIG_IPMI_PANIC_EVENT is not set
|
||||
# CONFIG_IPMI_DEVICE_INTERFACE is not set
|
||||
# CONFIG_IPMI_KCS is not set
|
||||
# CONFIG_IPMI_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_SCx200 is not set
|
||||
# CONFIG_SCx200_GPIO is not set
|
||||
CONFIG_AMD_RNG=y
|
||||
# CONFIG_INTEL_RNG is not set
|
||||
CONFIG_HW_RANDOM=y
|
||||
# CONFIG_AMD_PM768 is not set
|
||||
# CONFIG_NVRAM is not set
|
||||
CONFIG_RTC=y
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
# CONFIG_APPLICOM is not set
|
||||
# CONFIG_SONYPI is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_FTAPE is not set
|
||||
# CONFIG_AGP is not set
|
||||
|
||||
#
|
||||
# Direct Rendering Manager (XFree86 DRI support)
|
||||
#
|
||||
# CONFIG_DRM is not set
|
||||
|
||||
#
|
||||
# PCMCIA character devices
|
||||
#
|
||||
# CONFIG_PCMCIA_SERIAL_CS is not set
|
||||
# CONFIG_SYNCLINK_CS is not set
|
||||
# CONFIG_MWAVE is not set
|
||||
# CONFIG_OBMOUSE is not set
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
# CONFIG_QUOTA is not set
|
||||
# CONFIG_QFMT_V2 is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_REISERFS_CHECK is not set
|
||||
# CONFIG_REISERFS_PROC_INFO is not set
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_ADFS_FS_RW is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BEFS_DEBUG is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_JBD=y
|
||||
# CONFIG_JBD_DEBUG is not set
|
||||
CONFIG_FAT_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
# CONFIG_UMSDOS_FS is not set
|
||||
CONFIG_VFAT_FS=y
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_JFFS_FS is not set
|
||||
# CONFIG_JFFS2_FS is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_RAMFS=y
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_JOLIET is not set
|
||||
# CONFIG_ZISOFS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
# CONFIG_JFS_DEBUG is not set
|
||||
# CONFIG_JFS_STATISTICS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_NTFS_FS is not set
|
||||
# CONFIG_NTFS_RW is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
CONFIG_PROC_FS=y
|
||||
# CONFIG_DEVFS_FS is not set
|
||||
# CONFIG_DEVFS_MOUNT is not set
|
||||
# CONFIG_DEVFS_DEBUG is not set
|
||||
CONFIG_DEVPTS_FS=y
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_QNX4FS_RW is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
# CONFIG_EXT2_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
# CONFIG_UDF_RW is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
# CONFIG_UFS_FS_WRITE is not set
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_XFS_QUOTA is not set
|
||||
# CONFIG_XFS_RT is not set
|
||||
# CONFIG_XFS_TRACE is not set
|
||||
# CONFIG_XFS_DEBUG is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_INTERMEZZO_FS is not set
|
||||
# CONFIG_NFS_FS is not set
|
||||
# CONFIG_NFS_V3 is not set
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
# CONFIG_ROOT_NFS is not set
|
||||
# CONFIG_NFSD is not set
|
||||
# CONFIG_NFSD_V3 is not set
|
||||
# CONFIG_NFSD_TCP is not set
|
||||
# CONFIG_SUNRPC is not set
|
||||
# CONFIG_LOCKD is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_NCPFS_PACKET_SIGNING is not set
|
||||
# CONFIG_NCPFS_IOCTL_LOCKING is not set
|
||||
# CONFIG_NCPFS_STRONG is not set
|
||||
# CONFIG_NCPFS_NFS_NS is not set
|
||||
# CONFIG_NCPFS_OS2_NS is not set
|
||||
# CONFIG_NCPFS_SMALLDOS is not set
|
||||
# CONFIG_NCPFS_NLS is not set
|
||||
# CONFIG_NCPFS_EXTRAS is not set
|
||||
# CONFIG_ZISOFS_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
# CONFIG_SMB_NLS is not set
|
||||
CONFIG_NLS=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
# CONFIG_NLS_CODEPAGE_437 is not set
|
||||
# CONFIG_NLS_CODEPAGE_737 is not set
|
||||
# CONFIG_NLS_CODEPAGE_775 is not set
|
||||
# CONFIG_NLS_CODEPAGE_850 is not set
|
||||
# CONFIG_NLS_CODEPAGE_852 is not set
|
||||
# CONFIG_NLS_CODEPAGE_855 is not set
|
||||
# CONFIG_NLS_CODEPAGE_857 is not set
|
||||
# CONFIG_NLS_CODEPAGE_860 is not set
|
||||
# CONFIG_NLS_CODEPAGE_861 is not set
|
||||
# CONFIG_NLS_CODEPAGE_862 is not set
|
||||
# CONFIG_NLS_CODEPAGE_863 is not set
|
||||
# CONFIG_NLS_CODEPAGE_864 is not set
|
||||
# CONFIG_NLS_CODEPAGE_865 is not set
|
||||
# CONFIG_NLS_CODEPAGE_866 is not set
|
||||
# CONFIG_NLS_CODEPAGE_869 is not set
|
||||
# CONFIG_NLS_CODEPAGE_936 is not set
|
||||
# CONFIG_NLS_CODEPAGE_950 is not set
|
||||
# CONFIG_NLS_CODEPAGE_932 is not set
|
||||
# CONFIG_NLS_CODEPAGE_949 is not set
|
||||
# CONFIG_NLS_CODEPAGE_874 is not set
|
||||
# CONFIG_NLS_ISO8859_8 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1250 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1251 is not set
|
||||
# CONFIG_NLS_ISO8859_1 is not set
|
||||
# CONFIG_NLS_ISO8859_2 is not set
|
||||
# CONFIG_NLS_ISO8859_3 is not set
|
||||
# CONFIG_NLS_ISO8859_4 is not set
|
||||
# CONFIG_NLS_ISO8859_5 is not set
|
||||
# CONFIG_NLS_ISO8859_6 is not set
|
||||
# CONFIG_NLS_ISO8859_7 is not set
|
||||
# CONFIG_NLS_ISO8859_9 is not set
|
||||
# CONFIG_NLS_ISO8859_13 is not set
|
||||
# CONFIG_NLS_ISO8859_14 is not set
|
||||
# CONFIG_NLS_ISO8859_15 is not set
|
||||
# CONFIG_NLS_KOI8_R is not set
|
||||
# CONFIG_NLS_KOI8_U is not set
|
||||
# CONFIG_NLS_UTF8 is not set
|
||||
|
||||
#
|
||||
# Console drivers
|
||||
#
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
# CONFIG_VIDEO_SELECT is not set
|
||||
# CONFIG_MDA_CONSOLE is not set
|
||||
|
||||
#
|
||||
# Frame-buffer support
|
||||
#
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
# CONFIG_USB is not set
|
||||
|
||||
#
|
||||
# Support for USB gadgets
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# Bluetooth support
|
||||
#
|
||||
# CONFIG_BLUEZ is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
CONFIG_LOG_BUF_SHIFT=0
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
CONFIG_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CRC32=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
# CONFIG_FW_LOADER is not set
|
@ -0,0 +1,5 @@
|
||||
#!/bin/sh
|
||||
|
||||
killall pppoecd
|
||||
sleep 3
|
||||
killall -9 pppoecd
|
10
obsolete-buildroot/sources/openwrt/ipkg/zlib/control
Normal file
10
obsolete-buildroot/sources/openwrt/ipkg/zlib/control
Normal file
@ -0,0 +1,10 @@
|
||||
Package: zlib
|
||||
Priority: optional
|
||||
Version: 1.1.4-1
|
||||
Architecture: mipsel
|
||||
Maintainer: below0
|
||||
Section: libs
|
||||
Source: Embedded in the main OpenWrt buildroot
|
||||
Description: zlib is a library implementing the 'deflate' compression system used by many programs.
|
||||
|
||||
|
@ -351,6 +351,7 @@ CONFIG_IP_NF_MATCH_CONNTRACK=m
|
||||
CONFIG_IP_NF_MATCH_UNCLEAN=m
|
||||
CONFIG_IP_NF_MATCH_STRING=m
|
||||
# CONFIG_IP_NF_MATCH_OWNER is not set
|
||||
CONFIG_IP_NF_MATCH_PHYSDEV=m
|
||||
CONFIG_IP_NF_FILTER=y
|
||||
CONFIG_IP_NF_TARGET_REJECT=y
|
||||
CONFIG_IP_NF_TARGET_NETLINK=m
|
||||
@ -432,6 +433,25 @@ CONFIG_VLAN_8021Q=y
|
||||
# CONFIG_DEV_APPLETALK is not set
|
||||
# CONFIG_DECNET is not set
|
||||
CONFIG_BRIDGE=y
|
||||
CONFIG_BRIDGE_NF_EBTABLES=m
|
||||
CONFIG_BRIDGE_EBT_T_FILTER=m
|
||||
CONFIG_BRIDGE_EBT_T_NAT=m
|
||||
CONFIG_BRIDGE_EBT_BROUTE=m
|
||||
CONFIG_BRIDGE_EBT_LOG=m
|
||||
CONFIG_BRIDGE_EBT_IPF=m
|
||||
CONFIG_BRIDGE_EBT_ARPF=m
|
||||
CONFIG_BRIDGE_EBT_AMONG=m
|
||||
CONFIG_BRIDGE_EBT_LIMIT=m
|
||||
CONFIG_BRIDGE_EBT_VLANF=m
|
||||
CONFIG_BRIDGE_EBT_802_3=m
|
||||
CONFIG_BRIDGE_EBT_PKTTYPE=m
|
||||
CONFIG_BRIDGE_EBT_STP=m
|
||||
CONFIG_BRIDGE_EBT_MARKF=m
|
||||
CONFIG_BRIDGE_EBT_ARPREPLY=m
|
||||
CONFIG_BRIDGE_EBT_SNAT=m
|
||||
CONFIG_BRIDGE_EBT_DNAT=m
|
||||
CONFIG_BRIDGE_EBT_REDIRECT=m
|
||||
CONFIG_BRIDGE_EBT_MARK_T=m
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_LLC is not set
|
316
obsolete-buildroot/sources/openwrt/tools/trx.c
Normal file
316
obsolete-buildroot/sources/openwrt/tools/trx.c
Normal file
@ -0,0 +1,316 @@
|
||||
/*
|
||||
* Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/* July 29, 2004
|
||||
*
|
||||
* This is a hacked replacement for the 'trx' utility used to create
|
||||
* wrt54g .trx firmware files. It isn't pretty, but it does the job
|
||||
* for me.
|
||||
*
|
||||
* As an extension, you can specify a larger maximum length for the
|
||||
* .trx file using '-m'. It will be rounded up to be a multiple of 4K.
|
||||
* NOTE: This space will be malloc()'d.
|
||||
*
|
||||
* TODO: Support '-b' option to specify offsets for each file.
|
||||
*/
|
||||
|
||||
#include <stdio.h>
|
||||
#include <stdlib.h>
|
||||
#include <stddef.h>
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
#include <errno.h>
|
||||
#include <unistd.h>
|
||||
|
||||
uint32_t crc32buf(char *buf, size_t len);
|
||||
|
||||
/**********************************************************************/
|
||||
/* from trxhdr.h */
|
||||
|
||||
#define TRX_MAGIC 0x30524448 /* "HDR0" */
|
||||
#define TRX_VERSION 1
|
||||
#define TRX_MAX_LEN 0x3A0000
|
||||
#define TRX_NO_HEADER 1 /* Do not write TRX header */
|
||||
|
||||
struct trx_header {
|
||||
uint32_t magic; /* "HDR0" */
|
||||
uint32_t len; /* Length of file including header */
|
||||
uint32_t crc32; /* 32-bit CRC from flag_version to end of file */
|
||||
uint32_t flag_version; /* 0:15 flags, 16:31 version */
|
||||
uint32_t offsets[3]; /* Offsets of partitions from start of header */
|
||||
};
|
||||
|
||||
/**********************************************************************/
|
||||
|
||||
void usage(void) __attribute__ (( __noreturn__ ));
|
||||
|
||||
void usage(void)
|
||||
{
|
||||
fprintf(stderr, "Usage: trx [-o outfile] [-m maxlen] file [file [file]]\n");
|
||||
exit(EXIT_FAILURE);
|
||||
}
|
||||
|
||||
int main(int argc, char **argv)
|
||||
{
|
||||
FILE *out = stdout;
|
||||
FILE *in;
|
||||
char *ofn = NULL;
|
||||
char *buf;
|
||||
char *e;
|
||||
int c, i;
|
||||
size_t n;
|
||||
unsigned long maxlen = TRX_MAX_LEN;
|
||||
struct trx_header *p;
|
||||
|
||||
fprintf(stderr, "mjn3's trx replacement - v0.80\n");
|
||||
|
||||
while ((c = getopt(argc, argv, "o:m:")) != -1) {
|
||||
switch (c) {
|
||||
case 'o':
|
||||
ofn = optarg;
|
||||
break;
|
||||
case 'm':
|
||||
errno = 0;
|
||||
maxlen = strtoul(optarg, &e, 0);
|
||||
if (errno || (e == optarg) || *e) {
|
||||
fprintf(stderr, "illegal numeric string\n");
|
||||
usage();
|
||||
}
|
||||
#undef ROUND
|
||||
#define ROUND 0x1000
|
||||
if (maxlen & (ROUND-1)) {
|
||||
maxlen += (ROUND - (maxlen & (ROUND-1)));
|
||||
}
|
||||
if (maxlen < ROUND) {
|
||||
fprintf(stderr, "maxlen too small (or wrapped)\n");
|
||||
usage();
|
||||
}
|
||||
break;
|
||||
default:
|
||||
usage();
|
||||
}
|
||||
}
|
||||
|
||||
if (ofn && !(out = fopen(ofn, "w"))) {
|
||||
fprintf(stderr, "can not open \"%s\" for writing\n", ofn);
|
||||
usage();
|
||||
}
|
||||
|
||||
if (optind == argc) {
|
||||
fprintf(stderr, "we require at least one arg\n");
|
||||
usage();
|
||||
}
|
||||
|
||||
if (argc - optind > 3) {
|
||||
fprintf(stderr, "too many args: %d > 3\n", argc - optind);
|
||||
usage();
|
||||
}
|
||||
|
||||
if (maxlen > TRX_MAX_LEN) {
|
||||
fprintf(stderr, "WARNING: maxlen exceeds default maximum! Beware of overwriting nvram!\n");
|
||||
}
|
||||
|
||||
if (!(buf = malloc(maxlen))) {
|
||||
fprintf(stderr, "malloc failed\n");
|
||||
return EXIT_FAILURE;
|
||||
}
|
||||
|
||||
p = (struct trx_header *) buf;
|
||||
|
||||
p->magic = TRX_MAGIC;
|
||||
p->len = sizeof(struct trx_header);
|
||||
p->flag_version = (TRX_VERSION << 16);
|
||||
|
||||
i = 0;
|
||||
|
||||
while (optind < argc) {
|
||||
p->offsets[i++] = p->len;
|
||||
|
||||
if (!(in = fopen(argv[optind], "r"))) {
|
||||
fprintf(stderr, "can not open \"%s\" for reading\n", argv[optind]);
|
||||
usage();
|
||||
}
|
||||
|
||||
n = fread(buf + p->len, 1, maxlen - p->len, in);
|
||||
if (!feof(in)) {
|
||||
fprintf(stderr, "fread failure or file \"%s\" too large\n",
|
||||
argv[optind]);
|
||||
fclose(in);
|
||||
return EXIT_FAILURE;
|
||||
}
|
||||
|
||||
fclose(in);
|
||||
|
||||
++optind;
|
||||
|
||||
if (optind < argc) {
|
||||
#undef ROUND
|
||||
#define ROUND 4
|
||||
if (n & (ROUND-1)) {
|
||||
memset(buf + p->len + n, 0, ROUND - (n & (ROUND-1)));
|
||||
n += ROUND - (n & (ROUND-1));
|
||||
}
|
||||
}
|
||||
|
||||
p->len += n;
|
||||
}
|
||||
|
||||
#undef ROUND
|
||||
#define ROUND 0x1000
|
||||
n = p->len & (ROUND-1);
|
||||
if (n) {
|
||||
memset(buf + p->len, 0, ROUND - n);
|
||||
p->len += ROUND - n;
|
||||
}
|
||||
|
||||
p->crc32 = crc32buf((char *) &p->flag_version,
|
||||
p->len - offsetof(struct trx_header, flag_version));
|
||||
|
||||
if (!fwrite(buf, p->len, 1, out) || fflush(out)) {
|
||||
fprintf(stderr, "fwrite failed\n");
|
||||
return EXIT_FAILURE;
|
||||
}
|
||||
|
||||
fclose(out);
|
||||
|
||||
return EXIT_SUCCESS;
|
||||
}
|
||||
|
||||
/**********************************************************************/
|
||||
/* The following was grabbed and tweaked from the old snippets collection
|
||||
* of public domain C code. */
|
||||
|
||||
/**********************************************************************\
|
||||
|* Demonstration program to compute the 32-bit CRC used as the frame *|
|
||||
|* check sequence in ADCCP (ANSI X3.66, also known as FIPS PUB 71 *|
|
||||
|* and FED-STD-1003, the U.S. versions of CCITT's X.25 link-level *|
|
||||
|* protocol). The 32-bit FCS was added via the Federal Register, *|
|
||||
|* 1 June 1982, p.23798. I presume but don't know for certain that *|
|
||||
|* this polynomial is or will be included in CCITT V.41, which *|
|
||||
|* defines the 16-bit CRC (often called CRC-CCITT) polynomial. FIPS *|
|
||||
|* PUB 78 says that the 32-bit FCS reduces otherwise undetected *|
|
||||
|* errors by a factor of 10^-5 over 16-bit FCS. *|
|
||||
\**********************************************************************/
|
||||
|
||||
/* Copyright (C) 1986 Gary S. Brown. You may use this program, or
|
||||
code or tables extracted from it, as desired without restriction.*/
|
||||
|
||||
/* First, the polynomial itself and its table of feedback terms. The */
|
||||
/* polynomial is */
|
||||
/* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */
|
||||
/* Note that we take it "backwards" and put the highest-order term in */
|
||||
/* the lowest-order bit. The X^32 term is "implied"; the LSB is the */
|
||||
/* X^31 term, etc. The X^0 term (usually shown as "+1") results in */
|
||||
/* the MSB being 1. */
|
||||
|
||||
/* Note that the usual hardware shift register implementation, which */
|
||||
/* is what we're using (we're merely optimizing it by doing eight-bit */
|
||||
/* chunks at a time) shifts bits into the lowest-order term. In our */
|
||||
/* implementation, that means shifting towards the right. Why do we */
|
||||
/* do it this way? Because the calculated CRC must be transmitted in */
|
||||
/* order from highest-order term to lowest-order term. UARTs transmit */
|
||||
/* characters in order from LSB to MSB. By storing the CRC this way, */
|
||||
/* we hand it to the UART in the order low-byte to high-byte; the UART */
|
||||
/* sends each low-bit to hight-bit; and the result is transmission bit */
|
||||
/* by bit from highest- to lowest-order term without requiring any bit */
|
||||
/* shuffling on our part. Reception works similarly. */
|
||||
|
||||
/* The feedback terms table consists of 256, 32-bit entries. Notes: */
|
||||
/* */
|
||||
/* 1. The table can be generated at runtime if desired; code to do so */
|
||||
/* is shown later. It might not be obvious, but the feedback */
|
||||
/* terms simply represent the results of eight shift/xor opera- */
|
||||
/* tions for all combinations of data and CRC register values. */
|
||||
/* */
|
||||
/* 2. The CRC accumulation logic is the same for all CRC polynomials, */
|
||||
/* be they sixteen or thirty-two bits wide. You simply choose the */
|
||||
/* appropriate table. Alternatively, because the table can be */
|
||||
/* generated at runtime, you can start by generating the table for */
|
||||
/* the polynomial in question and use exactly the same "updcrc", */
|
||||
/* if your application needn't simultaneously handle two CRC */
|
||||
/* polynomials. (Note, however, that XMODEM is strange.) */
|
||||
/* */
|
||||
/* 3. For 16-bit CRCs, the table entries need be only 16 bits wide; */
|
||||
/* of course, 32-bit entries work OK if the high 16 bits are zero. */
|
||||
/* */
|
||||
/* 4. The values must be right-shifted by eight bits by the "updcrc" */
|
||||
/* logic; the shift must be unsigned (bring in zeroes). On some */
|
||||
/* hardware you could probably optimize the shift in assembler by */
|
||||
/* using byte-swap instructions. */
|
||||
|
||||
static const uint32_t crc_32_tab[] = { /* CRC polynomial 0xedb88320 */
|
||||
0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f,
|
||||
0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
|
||||
0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2,
|
||||
0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
|
||||
0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
|
||||
0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
|
||||
0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c,
|
||||
0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
|
||||
0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423,
|
||||
0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
|
||||
0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106,
|
||||
0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
|
||||
0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d,
|
||||
0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
|
||||
0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
|
||||
0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
|
||||
0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7,
|
||||
0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
|
||||
0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa,
|
||||
0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
|
||||
0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81,
|
||||
0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
|
||||
0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84,
|
||||
0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
|
||||
0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
|
||||
0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
|
||||
0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e,
|
||||
0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
|
||||
0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55,
|
||||
0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
|
||||
0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28,
|
||||
0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
|
||||
0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f,
|
||||
0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
|
||||
0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
|
||||
0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
|
||||
0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69,
|
||||
0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
|
||||
0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc,
|
||||
0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
|
||||
0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693,
|
||||
0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
|
||||
0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
|
||||
};
|
||||
|
||||
#define UPDC32(octet,crc) (crc_32_tab[((crc) ^ (octet)) & 0xff] ^ ((crc) >> 8))
|
||||
|
||||
uint32_t crc32buf(char *buf, size_t len)
|
||||
{
|
||||
uint32_t crc;
|
||||
|
||||
crc = 0xFFFFFFFF;
|
||||
|
||||
for ( ; len; --len, ++buf)
|
||||
{
|
||||
crc = UPDC32(*buf, crc);
|
||||
}
|
||||
|
||||
return crc;
|
||||
}
|
@ -1 +0,0 @@
|
||||
MST7MDT
|
@ -1,8 +0,0 @@
|
||||
# /etc/fstab: static file system information.
|
||||
#
|
||||
# <file system> <mount pt> <type> <options> <dump> <pass>
|
||||
/dev/root / ext2 rw,noauto 0 1
|
||||
proc /proc proc defaults 0 0
|
||||
devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
|
||||
tmpfs /tmp tmpfs defaults 0 0
|
||||
|
@ -1,10 +0,0 @@
|
||||
root:x:0:
|
||||
daemon:x:1:
|
||||
bin:x:2:
|
||||
sys:x:3:
|
||||
adm:x:4:
|
||||
tty:x:5:
|
||||
disk:x:6:
|
||||
utmp:x:43:
|
||||
staff:x:50:
|
||||
default:x:1000:
|
@ -1 +0,0 @@
|
||||
uclibc
|
@ -1 +0,0 @@
|
||||
127.0.0.1 localhost
|
@ -1,44 +0,0 @@
|
||||
#! /bin/sh
|
||||
#
|
||||
# urandom This script saves the random seed between reboots.
|
||||
# It is called from the boot, halt and reboot scripts.
|
||||
#
|
||||
# Version: @(#)urandom 1.33 22-Jun-1998 miquels@cistron.nl
|
||||
#
|
||||
|
||||
[ -c /dev/urandom ] || exit 0
|
||||
#. /etc/default/rcS
|
||||
|
||||
case "$1" in
|
||||
start|"")
|
||||
if [ "$VERBOSE" != no ]
|
||||
then
|
||||
echo -n "Initializing random number generator... "
|
||||
fi
|
||||
# Load and then save 512 bytes,
|
||||
# which is the size of the entropy pool
|
||||
if [ -f /etc/random-seed ]
|
||||
then
|
||||
cat /etc/random-seed >/dev/urandom
|
||||
fi
|
||||
rm -f /etc/random-seed
|
||||
umask 077
|
||||
dd if=/dev/urandom of=/etc/random-seed count=1 \
|
||||
>/dev/null 2>&1 || echo "urandom start: failed."
|
||||
umask 022
|
||||
[ "$VERBOSE" != no ] && echo "done."
|
||||
;;
|
||||
stop)
|
||||
# Carry a random seed from shut-down to start-up;
|
||||
# see documentation in linux/drivers/char/random.c
|
||||
[ "$VERBOSE" != no ] && echo -n "Saving random seed... "
|
||||
umask 077
|
||||
dd if=/dev/urandom of=/etc/random-seed count=1 \
|
||||
>/dev/null 2>&1 || echo "urandom stop: failed."
|
||||
[ "$VERBOSE" != no ] && echo "done."
|
||||
;;
|
||||
*)
|
||||
echo "Usage: urandom {start|stop}" >&2
|
||||
exit 1
|
||||
;;
|
||||
esac
|
@ -1,35 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Start the network....
|
||||
#
|
||||
|
||||
start() {
|
||||
echo "Starting network..."
|
||||
/sbin/ifup -a
|
||||
}
|
||||
stop() {
|
||||
echo -n "Stopping network..."
|
||||
/sbin/ifdown -a
|
||||
}
|
||||
restart() {
|
||||
stop
|
||||
start
|
||||
}
|
||||
|
||||
case "$1" in
|
||||
start)
|
||||
start
|
||||
;;
|
||||
stop)
|
||||
stop
|
||||
;;
|
||||
restart|reload)
|
||||
restart
|
||||
;;
|
||||
*)
|
||||
echo $"Usage: $0 {start|stop|restart}"
|
||||
exit 1
|
||||
esac
|
||||
|
||||
exit $?
|
||||
|
@ -1,27 +0,0 @@
|
||||
#!/bin/sh
|
||||
|
||||
|
||||
# Start all init scripts in /etc/init.d
|
||||
# executing them in numerical order.
|
||||
#
|
||||
for i in /etc/init.d/S??* ;do
|
||||
|
||||
# Ignore dangling symlinks (if any).
|
||||
[ ! -f "$i" ] && continue
|
||||
|
||||
case "$i" in
|
||||
*.sh)
|
||||
# Source shell script for speed.
|
||||
(
|
||||
trap - INT QUIT TSTP
|
||||
set start
|
||||
. $i
|
||||
)
|
||||
;;
|
||||
*)
|
||||
# No sh extension, so fork subprocess.
|
||||
$i start
|
||||
;;
|
||||
esac
|
||||
done
|
||||
|
@ -1,47 +0,0 @@
|
||||
# /etc/inittab
|
||||
#
|
||||
# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
|
||||
#
|
||||
# Note: BusyBox init doesn't support runlevels. The runlevels field is
|
||||
# completely ignored by BusyBox init. If you want runlevels, use
|
||||
# sysvinit.
|
||||
#
|
||||
# Format for each entry: <id>:<runlevels>:<action>:<process>
|
||||
#
|
||||
# id == tty to run on, or empty for /dev/console
|
||||
# runlevels == ignored
|
||||
# action == one of sysinit, respawn, askfirst, wait, and once
|
||||
# process == program to run
|
||||
|
||||
# Startup the system
|
||||
null::sysinit:/bin/mount -o remount,rw /
|
||||
null::sysinit:/bin/mount -t proc proc /proc
|
||||
null::sysinit:/bin/mount -a
|
||||
null::sysinit:/bin/hostname -F /etc/hostname
|
||||
null::sysinit:/sbin/ifconfig lo 127.0.0.1 up
|
||||
null::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
|
||||
# now run any rc scripts
|
||||
::sysinit:/etc/init.d/rcS
|
||||
|
||||
# Set up a couple of getty's
|
||||
tty1::respawn:/sbin/getty 38400 tty1
|
||||
tty2::respawn:/sbin/getty 38400 tty2
|
||||
|
||||
# Put a getty on the serial port
|
||||
#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
|
||||
|
||||
# Logging junk
|
||||
null::sysinit:/bin/touch /var/log/messages
|
||||
null::respawn:/sbin/syslogd -n -m 0
|
||||
null::respawn:/sbin/klogd -n
|
||||
tty3::respawn:/usr/bin/tail -f /var/log/messages
|
||||
|
||||
# Stuff to do for the 3-finger salute
|
||||
::ctrlaltdel:/sbin/reboot
|
||||
|
||||
# Stuff to do before rebooting
|
||||
null::shutdown:/usr/bin/killall klogd
|
||||
null::shutdown:/usr/bin/killall syslogd
|
||||
null::shutdown:/bin/umount -a -r
|
||||
null::shutdown:/sbin/swapoff -a
|
||||
|
@ -1,44 +0,0 @@
|
||||
# /etc/inputrc - global inputrc for libreadline
|
||||
# See readline(3readline) and `info readline' for more information.
|
||||
|
||||
# Be 8 bit clean.
|
||||
set input-meta on
|
||||
set output-meta on
|
||||
set bell-style visible
|
||||
|
||||
# To allow the use of 8bit-characters like the german umlauts, comment out
|
||||
# the line below. However this makes the meta key not work as a meta key,
|
||||
# which is annoying to those which don't need to type in 8-bit characters.
|
||||
|
||||
# set convert-meta off
|
||||
|
||||
"\e0d": backward-word
|
||||
"\e0c": forward-word
|
||||
"\e[h": beginning-of-line
|
||||
"\e[f": end-of-line
|
||||
"\e[1~": beginning-of-line
|
||||
"\e[4~": end-of-line
|
||||
#"\e[5~": beginning-of-history
|
||||
#"\e[6~": end-of-history
|
||||
"\e[3~": delete-char
|
||||
"\e[2~": quoted-insert
|
||||
|
||||
# Common standard keypad and cursor
|
||||
# (codes courtsey Werner Fink, <werner@suse.de>)
|
||||
#"\e[1~": history-search-backward
|
||||
"\e[2~": yank
|
||||
"\e[3~": delete-char
|
||||
#"\e[4~": set-mark
|
||||
"\e[5~": history-search-backward
|
||||
"\e[6~": history-search-forward
|
||||
# Normal keypad and cursor of xterm
|
||||
"\e[F": end-of-line
|
||||
"\e[H": beginning-of-line
|
||||
# Application keypad and cursor of xterm
|
||||
"\eOA": previous-history
|
||||
"\eOC": forward-char
|
||||
"\eOB": next-history
|
||||
"\eOD": backward-char
|
||||
"\eOF": end-of-line
|
||||
"\eOH": beginning-of-line
|
||||
|
@ -1,4 +0,0 @@
|
||||
|
||||
|
||||
Welcome to the Erik's uClibc development environment.
|
||||
|
@ -1,4 +0,0 @@
|
||||
# Configure Loopback
|
||||
auto lo
|
||||
iface lo inet loopback
|
||||
|
@ -1,13 +0,0 @@
|
||||
root:x:0:0:root:/root:/bin/sh
|
||||
daemon:x:1:1:daemon:/usr/sbin:/bin/sh
|
||||
bin:x:2:2:bin:/bin:/bin/sh
|
||||
sys:x:3:3:sys:/dev:/bin/sh
|
||||
sync:x:4:100:sync:/bin:/bin/sync
|
||||
mail:x:8:8:mail:/var/spool/mail:/bin/sh
|
||||
proxy:x:13:13:proxy:/bin:/bin/sh
|
||||
www-data:x:33:33:www-data:/var/www:/bin/sh
|
||||
backup:x:34:34:backup:/var/backups:/bin/sh
|
||||
operator:x:37:37:Operator:/var:/bin/sh
|
||||
sshd:x:103:99:Operator:/var:/bin/sh
|
||||
nobody:x:99:99:nobody:/home:/bin/sh
|
||||
default:x:1000:1000:Default non-root user:/home/default:/bin/sh
|
@ -1,48 +0,0 @@
|
||||
# ~/.bashrc: executed by bash(1) for non-login interactive shells.
|
||||
|
||||
export PATH=\
|
||||
/bin:\
|
||||
/sbin:\
|
||||
/usr/bin:\
|
||||
/usr/sbin:\
|
||||
/usr/bin/X11:\
|
||||
/usr/local/bin
|
||||
|
||||
# If running interactively, then:
|
||||
if [ "$PS1" ]; then
|
||||
|
||||
if [ "$BASH" ]; then
|
||||
export PS1="[\u@\h \W]\\$ "
|
||||
alias ll='/bin/ls --color=tty -laFh'
|
||||
alias ls='/bin/ls --color=tty -F'
|
||||
export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
|
||||
else
|
||||
if [ "`id -u`" -eq 0 ]; then
|
||||
export PS1='# '
|
||||
else
|
||||
export PS1='$ '
|
||||
fi
|
||||
fi
|
||||
|
||||
export USER=`id -un`
|
||||
export LOGNAME=$USER
|
||||
export HOSTNAME=`/bin/hostname`
|
||||
export HISTSIZE=1000
|
||||
export HISTFILESIZE=1000
|
||||
export PAGER='/bin/more '
|
||||
export EDITOR='/bin/vi'
|
||||
export INPUTRC=/etc/inputrc
|
||||
export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
|
||||
|
||||
### Some aliases
|
||||
alias ps2='ps facux '
|
||||
alias ps1='ps faxo "%U %t %p %a" '
|
||||
alias af='ps af'
|
||||
alias cls='clear'
|
||||
alias df='df -h'
|
||||
alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
|
||||
#alias bc='bc -l'
|
||||
alias minicom='minicom -c on'
|
||||
alias calc='calc -Cd '
|
||||
alias bc='calc -Cd '
|
||||
fi;
|
@ -1,31 +0,0 @@
|
||||
# /etc/protocols:
|
||||
# $Id$
|
||||
#
|
||||
# Internet (IP) protocols
|
||||
#
|
||||
# from: @(#)protocols 5.1 (Berkeley) 4/17/89
|
||||
#
|
||||
# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
|
||||
|
||||
ip 0 IP # internet protocol, pseudo protocol number
|
||||
icmp 1 ICMP # internet control message protocol
|
||||
igmp 2 IGMP # Internet Group Management
|
||||
ggp 3 GGP # gateway-gateway protocol
|
||||
ipencap 4 IP-ENCAP # IP encapsulated in IP (officially ``IP'')
|
||||
st 5 ST # ST datagram mode
|
||||
tcp 6 TCP # transmission control protocol
|
||||
egp 8 EGP # exterior gateway protocol
|
||||
pup 12 PUP # PARC universal packet protocol
|
||||
udp 17 UDP # user datagram protocol
|
||||
hmp 20 HMP # host monitoring protocol
|
||||
xns-idp 22 XNS-IDP # Xerox NS IDP
|
||||
rdp 27 RDP # "reliable datagram" protocol
|
||||
iso-tp4 29 ISO-TP4 # ISO Transport Protocol class 4
|
||||
xtp 36 XTP # Xpress Tranfer Protocol
|
||||
ddp 37 DDP # Datagram Delivery Protocol
|
||||
idpr-cmtp 39 IDPR-CMTP # IDPR Control Message Transport
|
||||
rspf 73 RSPF #Radio Shortest Path First.
|
||||
vmtp 81 VMTP # Versatile Message Transport
|
||||
ospf 89 OSPFIGP # Open Shortest Path First IGP
|
||||
ipip 94 IPIP # Yet Another IP encapsulation
|
||||
encap 98 ENCAP # Yet Another IP encapsulation
|
Binary file not shown.
@ -1,2 +0,0 @@
|
||||
domain dev.null
|
||||
nameserver 127.0.0.1
|
@ -1,12 +0,0 @@
|
||||
tty1
|
||||
tty2
|
||||
tty3
|
||||
tty4
|
||||
tty5
|
||||
tty6
|
||||
tty7
|
||||
tty8
|
||||
ttyS0
|
||||
ttyS1
|
||||
ttyS2
|
||||
ttyS3
|
@ -1,302 +0,0 @@
|
||||
# /etc/services:
|
||||
# $Id$
|
||||
#
|
||||
# Network services, Internet style
|
||||
#
|
||||
# Note that it is presently the policy of IANA to assign a single well-known
|
||||
# port number for both TCP and UDP; hence, most entries here have two entries
|
||||
# even if the protocol doesn't support UDP operations.
|
||||
# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports
|
||||
# are included, only the more common ones.
|
||||
|
||||
tcpmux 1/tcp # TCP port service multiplexer
|
||||
echo 7/tcp
|
||||
echo 7/udp
|
||||
discard 9/tcp sink null
|
||||
discard 9/udp sink null
|
||||
systat 11/tcp users
|
||||
daytime 13/tcp
|
||||
daytime 13/udp
|
||||
netstat 15/tcp
|
||||
qotd 17/tcp quote
|
||||
msp 18/tcp # message send protocol
|
||||
msp 18/udp # message send protocol
|
||||
chargen 19/tcp ttytst source
|
||||
chargen 19/udp ttytst source
|
||||
ftp-data 20/tcp
|
||||
ftp 21/tcp
|
||||
fsp 21/udp fspd
|
||||
ssh 22/tcp # SSH Remote Login Protocol
|
||||
ssh 22/udp # SSH Remote Login Protocol
|
||||
telnet 23/tcp
|
||||
# 24 - private
|
||||
smtp 25/tcp mail
|
||||
# 26 - unassigned
|
||||
time 37/tcp timserver
|
||||
time 37/udp timserver
|
||||
rlp 39/udp resource # resource location
|
||||
nameserver 42/tcp name # IEN 116
|
||||
whois 43/tcp nicname
|
||||
re-mail-ck 50/tcp # Remote Mail Checking Protocol
|
||||
re-mail-ck 50/udp # Remote Mail Checking Protocol
|
||||
domain 53/tcp nameserver # name-domain server
|
||||
domain 53/udp nameserver
|
||||
mtp 57/tcp # deprecated
|
||||
bootps 67/tcp # BOOTP server
|
||||
bootps 67/udp
|
||||
bootpc 68/tcp # BOOTP client
|
||||
bootpc 68/udp
|
||||
tftp 69/udp
|
||||
gopher 70/tcp # Internet Gopher
|
||||
gopher 70/udp
|
||||
rje 77/tcp netrjs
|
||||
finger 79/tcp
|
||||
www 80/tcp http # WorldWideWeb HTTP
|
||||
www 80/udp # HyperText Transfer Protocol
|
||||
link 87/tcp ttylink
|
||||
kerberos 88/tcp kerberos5 krb5 # Kerberos v5
|
||||
kerberos 88/udp kerberos5 krb5 # Kerberos v5
|
||||
supdup 95/tcp
|
||||
# 100 - reserved
|
||||
hostnames 101/tcp hostname # usually from sri-nic
|
||||
iso-tsap 102/tcp tsap # part of ISODE.
|
||||
csnet-ns 105/tcp cso-ns # also used by CSO name server
|
||||
csnet-ns 105/udp cso-ns
|
||||
# unfortunately the poppassd (Eudora) uses a port which has already
|
||||
# been assigned to a different service. We list the poppassd as an
|
||||
# alias here. This should work for programs asking for this service.
|
||||
# (due to a bug in inetd the 3com-tsmux line is disabled)
|
||||
#3com-tsmux 106/tcp poppassd
|
||||
#3com-tsmux 106/udp poppassd
|
||||
rtelnet 107/tcp # Remote Telnet
|
||||
rtelnet 107/udp
|
||||
pop-2 109/tcp postoffice # POP version 2
|
||||
pop-2 109/udp
|
||||
pop-3 110/tcp # POP version 3
|
||||
pop-3 110/udp
|
||||
sunrpc 111/tcp portmapper # RPC 4.0 portmapper TCP
|
||||
sunrpc 111/udp portmapper # RPC 4.0 portmapper UDP
|
||||
auth 113/tcp authentication tap ident
|
||||
sftp 115/tcp
|
||||
uucp-path 117/tcp
|
||||
nntp 119/tcp readnews untp # USENET News Transfer Protocol
|
||||
ntp 123/tcp
|
||||
ntp 123/udp # Network Time Protocol
|
||||
netbios-ns 137/tcp # NETBIOS Name Service
|
||||
netbios-ns 137/udp
|
||||
netbios-dgm 138/tcp # NETBIOS Datagram Service
|
||||
netbios-dgm 138/udp
|
||||
netbios-ssn 139/tcp # NETBIOS session service
|
||||
netbios-ssn 139/udp
|
||||
imap2 143/tcp # Interim Mail Access Proto v2
|
||||
imap2 143/udp
|
||||
snmp 161/udp # Simple Net Mgmt Proto
|
||||
snmp-trap 162/udp snmptrap # Traps for SNMP
|
||||
cmip-man 163/tcp # ISO mgmt over IP (CMOT)
|
||||
cmip-man 163/udp
|
||||
cmip-agent 164/tcp
|
||||
cmip-agent 164/udp
|
||||
xdmcp 177/tcp # X Display Mgr. Control Proto
|
||||
xdmcp 177/udp
|
||||
nextstep 178/tcp NeXTStep NextStep # NeXTStep window
|
||||
nextstep 178/udp NeXTStep NextStep # server
|
||||
bgp 179/tcp # Border Gateway Proto.
|
||||
bgp 179/udp
|
||||
prospero 191/tcp # Cliff Neuman's Prospero
|
||||
prospero 191/udp
|
||||
irc 194/tcp # Internet Relay Chat
|
||||
irc 194/udp
|
||||
smux 199/tcp # SNMP Unix Multiplexer
|
||||
smux 199/udp
|
||||
at-rtmp 201/tcp # AppleTalk routing
|
||||
at-rtmp 201/udp
|
||||
at-nbp 202/tcp # AppleTalk name binding
|
||||
at-nbp 202/udp
|
||||
at-echo 204/tcp # AppleTalk echo
|
||||
at-echo 204/udp
|
||||
at-zis 206/tcp # AppleTalk zone information
|
||||
at-zis 206/udp
|
||||
qmtp 209/tcp # The Quick Mail Transfer Protocol
|
||||
qmtp 209/udp # The Quick Mail Transfer Protocol
|
||||
z3950 210/tcp wais # NISO Z39.50 database
|
||||
z3950 210/udp wais
|
||||
ipx 213/tcp # IPX
|
||||
ipx 213/udp
|
||||
imap3 220/tcp # Interactive Mail Access
|
||||
imap3 220/udp # Protocol v3
|
||||
ulistserv 372/tcp # UNIX Listserv
|
||||
ulistserv 372/udp
|
||||
https 443/tcp # MCom
|
||||
https 443/udp # MCom
|
||||
snpp 444/tcp # Simple Network Paging Protocol
|
||||
snpp 444/udp # Simple Network Paging Protocol
|
||||
saft 487/tcp # Simple Asynchronous File Transfer
|
||||
saft 487/udp # Simple Asynchronous File Transfer
|
||||
npmp-local 610/tcp dqs313_qmaster # npmp-local / DQS
|
||||
npmp-local 610/udp dqs313_qmaster # npmp-local / DQS
|
||||
npmp-gui 611/tcp dqs313_execd # npmp-gui / DQS
|
||||
npmp-gui 611/udp dqs313_execd # npmp-gui / DQS
|
||||
hmmp-ind 612/tcp dqs313_intercell# HMMP Indication / DQS
|
||||
hmmp-ind 612/udp dqs313_intercell# HMMP Indication / DQS
|
||||
#
|
||||
# UNIX specific services
|
||||
#
|
||||
exec 512/tcp
|
||||
biff 512/udp comsat
|
||||
login 513/tcp
|
||||
who 513/udp whod
|
||||
shell 514/tcp cmd # no passwords used
|
||||
syslog 514/udp
|
||||
printer 515/tcp spooler # line printer spooler
|
||||
talk 517/udp
|
||||
ntalk 518/udp
|
||||
route 520/udp router routed # RIP
|
||||
timed 525/udp timeserver
|
||||
tempo 526/tcp newdate
|
||||
courier 530/tcp rpc
|
||||
conference 531/tcp chat
|
||||
netnews 532/tcp readnews
|
||||
netwall 533/udp # -for emergency broadcasts
|
||||
uucp 540/tcp uucpd # uucp daemon
|
||||
afpovertcp 548/tcp # AFP over TCP
|
||||
afpovertcp 548/udp # AFP over TCP
|
||||
remotefs 556/tcp rfs_server rfs # Brunhoff remote filesystem
|
||||
klogin 543/tcp # Kerberized `rlogin' (v5)
|
||||
kshell 544/tcp krcmd # Kerberized `rsh' (v5)
|
||||
kerberos-adm 749/tcp # Kerberos `kadmin' (v5)
|
||||
#
|
||||
webster 765/tcp # Network dictionary
|
||||
webster 765/udp
|
||||
#
|
||||
# From ``Assigned Numbers'':
|
||||
#
|
||||
#> The Registered Ports are not controlled by the IANA and on most systems
|
||||
#> can be used by ordinary user processes or programs executed by ordinary
|
||||
#> users.
|
||||
#
|
||||
#> Ports are used in the TCP [45,106] to name the ends of logical
|
||||
#> connections which carry long term conversations. For the purpose of
|
||||
#> providing services to unknown callers, a service contact port is
|
||||
#> defined. This list specifies the port used by the server process as its
|
||||
#> contact port. While the IANA can not control uses of these ports it
|
||||
#> does register or list uses of these ports as a convienence to the
|
||||
#> community.
|
||||
#
|
||||
nfsdstatus 1110/tcp
|
||||
nfsd-keepalive 1110/udp
|
||||
|
||||
ingreslock 1524/tcp
|
||||
ingreslock 1524/udp
|
||||
prospero-np 1525/tcp # Prospero non-privileged
|
||||
prospero-np 1525/udp
|
||||
datametrics 1645/tcp old-radius # datametrics / old radius entry
|
||||
datametrics 1645/udp old-radius # datametrics / old radius entry
|
||||
sa-msg-port 1646/tcp old-radacct # sa-msg-port / old radacct entry
|
||||
sa-msg-port 1646/udp old-radacct # sa-msg-port / old radacct entry
|
||||
radius 1812/tcp # Radius
|
||||
radius 1812/udp # Radius
|
||||
radacct 1813/tcp # Radius Accounting
|
||||
radacct 1813/udp # Radius Accounting
|
||||
nfsd 2049/tcp nfs
|
||||
nfsd 2049/udp nfs
|
||||
cvspserver 2401/tcp # CVS client/server operations
|
||||
cvspserver 2401/udp # CVS client/server operations
|
||||
mysql 3306/tcp # MySQL
|
||||
mysql 3306/udp # MySQL
|
||||
rfe 5002/tcp # Radio Free Ethernet
|
||||
rfe 5002/udp # Actually uses UDP only
|
||||
cfengine 5308/tcp # CFengine
|
||||
cfengine 5308/udp # CFengine
|
||||
bbs 7000/tcp # BBS service
|
||||
#
|
||||
#
|
||||
# Kerberos (Project Athena/MIT) services
|
||||
# Note that these are for Kerberos v4, and are unofficial. Sites running
|
||||
# v4 should uncomment these and comment out the v5 entries above.
|
||||
#
|
||||
kerberos4 750/udp kerberos-iv kdc # Kerberos (server) udp
|
||||
kerberos4 750/tcp kerberos-iv kdc # Kerberos (server) tcp
|
||||
kerberos_master 751/udp # Kerberos authentication
|
||||
kerberos_master 751/tcp # Kerberos authentication
|
||||
passwd_server 752/udp # Kerberos passwd server
|
||||
krb_prop 754/tcp # Kerberos slave propagation
|
||||
krbupdate 760/tcp kreg # Kerberos registration
|
||||
kpasswd 761/tcp kpwd # Kerberos "passwd"
|
||||
kpop 1109/tcp # Pop with Kerberos
|
||||
knetd 2053/tcp # Kerberos de-multiplexor
|
||||
zephyr-srv 2102/udp # Zephyr server
|
||||
zephyr-clt 2103/udp # Zephyr serv-hm connection
|
||||
zephyr-hm 2104/udp # Zephyr hostmanager
|
||||
eklogin 2105/tcp # Kerberos encrypted rlogin
|
||||
#
|
||||
# Unofficial but necessary (for NetBSD) services
|
||||
#
|
||||
supfilesrv 871/tcp # SUP server
|
||||
supfiledbg 1127/tcp # SUP debugging
|
||||
#
|
||||
# Datagram Delivery Protocol services
|
||||
#
|
||||
rtmp 1/ddp # Routing Table Maintenance Protocol
|
||||
nbp 2/ddp # Name Binding Protocol
|
||||
echo 4/ddp # AppleTalk Echo Protocol
|
||||
zip 6/ddp # Zone Information Protocol
|
||||
#
|
||||
# Services added for the Debian GNU/Linux distribution
|
||||
poppassd 106/tcp # Eudora
|
||||
poppassd 106/udp # Eudora
|
||||
mailq 174/tcp # Mailer transport queue for Zmailer
|
||||
mailq 174/tcp # Mailer transport queue for Zmailer
|
||||
omirr 808/tcp omirrd # online mirror
|
||||
omirr 808/udp omirrd # online mirror
|
||||
rmtcfg 1236/tcp # Gracilis Packeten remote config server
|
||||
xtel 1313/tcp # french minitel
|
||||
coda_opcons 1355/udp # Coda opcons (Coda fs)
|
||||
coda_venus 1363/udp # Coda venus (Coda fs)
|
||||
coda_auth 1357/udp # Coda auth (Coda fs)
|
||||
coda_udpsrv 1359/udp # Coda udpsrv (Coda fs)
|
||||
coda_filesrv 1361/udp # Coda filesrv (Coda fs)
|
||||
codacon 1423/tcp venus.cmu # Coda Console (Coda fs)
|
||||
coda_aux1 1431/tcp # coda auxiliary service (Coda fs)
|
||||
coda_aux1 1431/udp # coda auxiliary service (Coda fs)
|
||||
coda_aux2 1433/tcp # coda auxiliary service (Coda fs)
|
||||
coda_aux2 1433/udp # coda auxiliary service (Coda fs)
|
||||
coda_aux3 1435/tcp # coda auxiliary service (Coda fs)
|
||||
coda_aux3 1435/udp # coda auxiliary service (Coda fs)
|
||||
cfinger 2003/tcp # GNU Finger
|
||||
afbackup 2988/tcp # Afbackup system
|
||||
afbackup 2988/udp # Afbackup system
|
||||
icp 3130/tcp # Internet Cache Protocol (Squid)
|
||||
icp 3130/udp # Internet Cache Protocol (Squid)
|
||||
postgres 5432/tcp # POSTGRES
|
||||
postgres 5432/udp # POSTGRES
|
||||
fax 4557/tcp # FAX transmission service (old)
|
||||
hylafax 4559/tcp # HylaFAX client-server protocol (new)
|
||||
noclog 5354/tcp # noclogd with TCP (nocol)
|
||||
noclog 5354/udp # noclogd with UDP (nocol)
|
||||
hostmon 5355/tcp # hostmon uses TCP (nocol)
|
||||
hostmon 5355/udp # hostmon uses TCP (nocol)
|
||||
ircd 6667/tcp # Internet Relay Chat
|
||||
ircd 6667/udp # Internet Relay Chat
|
||||
webcache 8080/tcp # WWW caching service
|
||||
webcache 8080/udp # WWW caching service
|
||||
tproxy 8081/tcp # Transparent Proxy
|
||||
tproxy 8081/udp # Transparent Proxy
|
||||
mandelspawn 9359/udp mandelbrot # network mandelbrot
|
||||
amanda 10080/udp # amanda backup services
|
||||
amandaidx 10082/tcp # amanda backup services
|
||||
amidxtape 10083/tcp # amanda backup services
|
||||
isdnlog 20011/tcp # isdn logging system
|
||||
isdnlog 20011/udp # isdn logging system
|
||||
vboxd 20012/tcp # voice box system
|
||||
vboxd 20012/udp # voice box system
|
||||
binkp 24554/tcp # Binkley
|
||||
binkp 24554/udp # Binkley
|
||||
asp 27374/tcp # Address Search Protocol
|
||||
asp 27374/udp # Address Search Protocol
|
||||
tfido 60177/tcp # Ifmail
|
||||
tfido 60177/udp # Ifmail
|
||||
fido 60179/tcp # Ifmail
|
||||
fido 60179/udp # Ifmail
|
||||
|
||||
# Local services
|
||||
|
@ -1,12 +0,0 @@
|
||||
root::10933:0:99999:7:::
|
||||
bin:*:10933:0:99999:7:::
|
||||
daemon:*:10933:0:99999:7:::
|
||||
adm:*:10933:0:99999:7:::
|
||||
lp:*:10933:0:99999:7:::
|
||||
sync:*:10933:0:99999:7:::
|
||||
shutdown:*:10933:0:99999:7:::
|
||||
halt:*:10933:0:99999:7:::
|
||||
uucp:*:10933:0:99999:7:::
|
||||
operator:*:10933:0:99999:7:::
|
||||
nobody:*:10933:0:99999:7:::
|
||||
default::10933:0:99999:7:::
|
@ -1,7 +0,0 @@
|
||||
# ~/.bash_logout: executed by bash(1) when login shell exits.
|
||||
|
||||
# when leaving the console clear the screen to increase privacy
|
||||
|
||||
case "`tty`" in
|
||||
/dev/tty[0-9]*) clear
|
||||
esac
|
@ -1,15 +0,0 @@
|
||||
# .bash_profile
|
||||
|
||||
export PATH=\
|
||||
/bin:\
|
||||
/sbin:\
|
||||
/usr/bin:\
|
||||
/usr/sbin:\
|
||||
/usr/bin/X11:\
|
||||
/usr/local/bin
|
||||
|
||||
umask 022
|
||||
|
||||
if [ -f ~/.bashrc ]; then
|
||||
source ~/.bashrc
|
||||
fi
|
@ -1,48 +0,0 @@
|
||||
# ~/.bashrc: executed by bash(1) for non-login interactive shells.
|
||||
|
||||
export PATH=\
|
||||
/bin:\
|
||||
/sbin:\
|
||||
/usr/bin:\
|
||||
/usr/sbin:\
|
||||
/usr/bin/X11:\
|
||||
/usr/local/bin
|
||||
|
||||
# If running interactively, then:
|
||||
if [ "$PS1" ]; then
|
||||
|
||||
if [ "$BASH" ]; then
|
||||
export PS1="[\u@\h \W]\\$ "
|
||||
else
|
||||
if [ "`id -u`" -eq 0 ]; then
|
||||
export PS1='# '
|
||||
else
|
||||
export PS1='$ '
|
||||
fi
|
||||
fi
|
||||
|
||||
export USER=`id -un`
|
||||
export LOGNAME=$USER
|
||||
export HOSTNAME=`/bin/hostname`
|
||||
export HISTSIZE=1000
|
||||
export HISTFILESIZE=1000
|
||||
export PAGER='/bin/more '
|
||||
export EDITOR='/bin/vi'
|
||||
export INPUTRC=/etc/inputrc
|
||||
export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
|
||||
export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
|
||||
|
||||
### Some aliases
|
||||
alias ps2='ps facux '
|
||||
alias ps1='ps faxo "%U %t %p %a" '
|
||||
alias af='ps af'
|
||||
alias cls='clear'
|
||||
alias ll='/bin/ls --color=tty -laFh'
|
||||
alias ls='/bin/ls --color=tty -F'
|
||||
alias df='df -h'
|
||||
alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
|
||||
#alias bc='bc -l'
|
||||
alias minicom='minicom -c on'
|
||||
alias calc='calc -Cd '
|
||||
alias bc='calc -Cd '
|
||||
fi;
|
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user