restructure; cleanup

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@120 3c298f89-4303-0410-b956-a3cf2f4a3e73

obsolete-buildroot/make/busybox.mk

@@ -15,7 +15,7 @@ BUSYBOX_SOURCE:=busybox-1.00-pre8.tar.bz2
 BUSYBOX_SITE:=http://www.busybox.net/downloads
 endif
 BUSYBOX_UNZIP=bzcat
-BUSYBOX_CONFIG:=$(SOURCE_DIR)/busybox.config
+BUSYBOX_CONFIG:=$(SOURCE_DIR)/openwrt/busybox/busybox.config
 
 $(DL_DIR)/$(BUSYBOX_SOURCE):
 	 $(WGET) -P $(DL_DIR) $(BUSYBOX_SITE)/$(BUSYBOX_SOURCE)
@@ -25,7 +25,7 @@ busybox-source: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_CONFIG)
 $(BUSYBOX_DIR)/.configured: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_CONFIG)
 	$(BUSYBOX_UNZIP) $(DL_DIR)/$(BUSYBOX_SOURCE) | tar -C $(BUILD_DIR) -xvf -
 	# Allow busybox patches.
-	$(SOURCE_DIR)/patch-kernel.sh $(BUSYBOX_DIR) $(SOURCE_DIR) busybox-*.patch
+	$(SOURCE_DIR)/patch-kernel.sh $(BUSYBOX_DIR) $(SOURCE_DIR)/openwrt/busybox/patches
 	cp $(BUSYBOX_CONFIG) $(BUSYBOX_DIR)/.config
 	$(SED) "s,^CROSS.*,CROSS=$(TARGET_CROSS)\n\
 		PREFIX=$(TARGET_DIR),;" $(BUSYBOX_DIR)/Rules.mak

obsolete-buildroot/make/openssh.mk

@@ -93,15 +93,15 @@ $(OPENSSH_IPK_DIR)/usr/bin/ssh: $(OPENSSH_DIR)/ssh
 $(OPENSSH_SERVER_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
 	rm -rf $(OPENSSH_IPK_DIR)/build
 	mkdir -p $(OPENSSH_IPK_DIR)/build/CONTROL
-	cp $(SOURCE_DIR)/openssh.server.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
-	cp $(SOURCE_DIR)/openssh.server.conffiles $(OPENSSH_IPK_DIR)/build/CONTROL/conffiles
-	cp $(SOURCE_DIR)/openssh.server.preinst $(OPENSSH_IPK_DIR)/build/CONTROL/preinst
+	cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.server.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
+	cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.server.conffiles $(OPENSSH_IPK_DIR)/build/CONTROL/conffiles
+	cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.server.preinst $(OPENSSH_IPK_DIR)/build/CONTROL/preinst
 	chmod a+x $(OPENSSH_IPK_DIR)/build/CONTROL/preinst
-	cp $(SOURCE_DIR)/openssh.server.postinst $(OPENSSH_IPK_DIR)/build/CONTROL/postinst
+	cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.server.postinst $(OPENSSH_IPK_DIR)/build/CONTROL/postinst
 	chmod a+x $(OPENSSH_IPK_DIR)/build/CONTROL/postinst
 	mkdir -p $(OPENSSH_IPK_DIR)/build/etc/init.d
-	cp $(SOURCE_DIR)/openssh.server.sshd_config $(OPENSSH_IPK_DIR)/build/etc/sshd_config
-	cp $(SOURCE_DIR)/openssh.server.S50sshd-ipk $(OPENSSH_IPK_DIR)/build/etc/init.d/S50sshd
+	cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.server.sshd_config $(OPENSSH_IPK_DIR)/build/etc/sshd_config
+	cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.server.S50sshd-ipk $(OPENSSH_IPK_DIR)/build/etc/init.d/S50sshd
 	chmod a+x $(OPENSSH_IPK_DIR)/build/etc/init.d/S50sshd
 	mkdir -p $(OPENSSH_IPK_DIR)/build/usr/sbin
 	cp $(OPENSSH_IPK_DIR)/usr/sbin/sshd $(OPENSSH_IPK_DIR)/build/usr/sbin
@@ -113,12 +113,12 @@ $(OPENSSH_SERVER_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
 $(OPENSSH_CLIENT_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
 	rm -rf $(OPENSSH_IPK_DIR)/build
 	mkdir -p $(OPENSSH_IPK_DIR)/build/CONTROL
-	cp $(SOURCE_DIR)/openssh.client.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
-	cp $(SOURCE_DIR)/openssh.client.conffiles $(OPENSSH_IPK_DIR)/build/CONTROL/conffiles
-	cp $(SOURCE_DIR)/openssh.client.preinst $(OPENSSH_IPK_DIR)/build/CONTROL/preinst
+	cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.client.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
+	cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.client.conffiles $(OPENSSH_IPK_DIR)/build/CONTROL/conffiles
+	cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.client.preinst $(OPENSSH_IPK_DIR)/build/CONTROL/preinst
 	chmod a+x $(OPENSSH_IPK_DIR)/build/CONTROL/preinst
 	mkdir -p $(OPENSSH_IPK_DIR)/build/etc
-	cp $(SOURCE_DIR)/openssh.client.ssh_config $(OPENSSH_IPK_DIR)/build/etc/ssh_config
+	cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.client.ssh_config $(OPENSSH_IPK_DIR)/build/etc/ssh_config
 	mkdir -p $(OPENSSH_IPK_DIR)/build/usr/bin
 	cp $(OPENSSH_IPK_DIR)/usr/bin/ssh $(OPENSSH_IPK_DIR)/build/usr/bin
 	cp $(OPENSSH_IPK_DIR)/usr/bin/scp $(OPENSSH_IPK_DIR)/build/usr/bin
@@ -128,7 +128,7 @@ $(OPENSSH_CLIENT_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
 $(OPENSSH_SFTP_SERVER_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
 	rm -rf $(OPENSSH_IPK_DIR)/build
 	mkdir -p $(OPENSSH_IPK_DIR)/build/CONTROL
-	cp $(SOURCE_DIR)/openssh.sftp-server.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
+	cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.sftp-server.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
 	mkdir -p $(OPENSSH_IPK_DIR)/build/usr/sbin
 	cp $(OPENSSH_IPK_DIR)/usr/sbin/sftp-server $(OPENSSH_IPK_DIR)/build/usr/sbin
 	cd $(BUILD_DIR); $(STAGING_DIR)/bin/ipkg-build -c -o root -g root $(OPENSSH_IPK_DIR)/build
@@ -137,7 +137,7 @@ $(OPENSSH_SFTP_SERVER_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
 $(OPENSSH_SFTP_CLIENT_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
 	rm -rf $(OPENSSH_IPK_DIR)/build
 	mkdir -p $(OPENSSH_IPK_DIR)/build/CONTROL
-	cp $(SOURCE_DIR)/openssh.sftp-client.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
+	cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.sftp-client.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
 	mkdir -p $(OPENSSH_IPK_DIR)/build/usr/bin
 	cp $(OPENSSH_IPK_DIR)/usr/bin/sftp $(OPENSSH_IPK_DIR)/build/usr/bin
 	cd $(BUILD_DIR); $(STAGING_DIR)/bin/ipkg-build -c -o root -g root $(OPENSSH_IPK_DIR)/build
@@ -146,7 +146,7 @@ $(OPENSSH_SFTP_CLIENT_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
 $(OPENSSH_CLIENT_EX_IPK): $(OPENSSH_IPK_DIR)/usr/bin/ssh
 	rm -rf $(OPENSSH_IPK_DIR)/build
 	mkdir -p $(OPENSSH_IPK_DIR)/build/CONTROL
-	cp $(SOURCE_DIR)/openssh.client.ex.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
+	cp $(SOURCE_DIR)/openwrt/ipkg/openssh/openssh.client.ex.control $(OPENSSH_IPK_DIR)/build/CONTROL/control
 	mkdir -p $(OPENSSH_IPK_DIR)/build/usr/bin
 	cp $(OPENSSH_IPK_DIR)/usr/bin/ssh-add $(OPENSSH_IPK_DIR)/build/usr/bin
 	cp $(OPENSSH_IPK_DIR)/usr/bin/ssh-agent $(OPENSSH_IPK_DIR)/build/usr/bin

obsolete-buildroot/make/openssl.mk

@@ -70,7 +70,7 @@ openssl: uclibc $(TARGET_DIR)/usr/lib/libcrypto.so.0.9.7
 
 $(LIBSSL_IPK): uclibc $(STAGING_DIR)/usr/lib/libcrypto.a
 	mkdir -p $(OPENSSL_IPK_DIR)/CONTROL
-	cp $(SOURCE_DIR)/libssl.control $(OPENSSL_IPK_DIR)/CONTROL/control
+	cp $(SOURCE_DIR)/openwrt/openssl/control $(OPENSSL_IPK_DIR)/CONTROL/control
 	mkdir -p $(OPENSSL_IPK_DIR)/usr/lib
 	cp -fa $(STAGING_DIR)/lib/libcrypto.so* $(OPENSSL_IPK_DIR)/usr/lib/
 	cp -fa $(STAGING_DIR)/lib/libssl.so* $(OPENSSL_IPK_DIR)/usr/lib/

obsolete-buildroot/make/openwrt.mk

@@ -36,22 +36,10 @@ openwrt-base: $(OPENWRT_TARGETS)
 
 ifneq ($(filter $(TARGETS),openwrt-base),)
 
-# WRT54G_SOURCE=wrt54gv2.2.02.2.tgz
-# WRT54G_SITE=http://www.linksys.com/support/opensourcecode/wrt54gv2/2.02.2
-
-# WRT54G_SOURCE=wrt54g.2.02.7.tgz
-# WRT54G_SITE=http://www.linksys.com/support/opensourcecode/wrt54gv2/2.02.7
-# WRT54G_DIR=$(BUILD_DIR)/WRT54G
-
 WRT54G_SOURCE=wrt54gs.2.07.1.tgz
 WRT54G_SITE=http://www.linksys.com/support/opensourcecode/wrt54gs/2.07.1
-
 WRT54G_DIR=$(BUILD_DIR)/WRT54GS
 
-# OPENWRT_ROOT=openwrt-root.tar.bz2
-# OPENWRT_SITE=http://127.0.0.1
-# OPENWRT_DIR=$(BUILD_DIR)/openwrt
-
 LINUX_DIR=$(WRT54G_DIR)/release/src/linux/linux
 LINUX_FORMAT=zImage
 LINUX_BINLOC=arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz
@@ -63,17 +51,14 @@ $(LINUX_DIR)/.unpacked: $(WRT54G_DIR)/.prepared
 	touch $(LINUX_DIR)/.unpacked
 
 $(LINUX_DIR)/.patched: $(WRT54G_DIR)/.prepared
-	$(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR)/../.. $(SOURCE_DIR) openwrt-linux-netfilter.patch
-	$(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR)/../.. $(SOURCE_DIR) openwrt-linux-sch_htb.patch
-	$(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR)/../.. $(SOURCE_DIR) openwrt-wrt54g-linux.patch
-	$(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR)/../.. $(SOURCE_DIR) openwrt-wrt54g-nfsswap.patch
+	$(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR)/../.. $(SOURCE_DIR)/openwrt/kernel/patches
 	# use replacement diag module code
-	cp -f $(SOURCE_DIR)/openwrt-diag.c $(LINUX_DIR)/drivers/net/diag/diag_led.c
-	cp -f $(SOURCE_DIR)/openwrt-wrt54g-linux.config $(LINUX_DIR)/.config
+	cp -f $(SOURCE_DIR)/openwrt/kernel/diag.c $(LINUX_DIR)/drivers/net/diag/diag_led.c
+	cp -f $(SOURCE_DIR)/openwrt/kernel/linux.config $(LINUX_DIR)/.config
 	-(cd $(BUILD_DIR); ln -sf $(LINUX_DIR) linux)
 	-(cd $(LINUX_DIR)/arch/mips/brcm-boards/bcm947xx/; \
 	rm -rf compressed; \
-	tar jxvf $(SOURCE_DIR)/compressed-20040531.tar.bz2; \
+	tar jxvf $(SOURCE_DIR)/openwrt/kernel/compressed-20040531.tar.bz2; \
 	)
 	touch $(LINUX_DIR)/.patched
 
@@ -107,8 +92,7 @@ $(WRT54G_DIR)/.source: $(DL_DIR)/$(WRT54G_SOURCE)
 	touch $(WRT54G_DIR)/.source
 
 $(WRT54G_DIR)/.prepared: $(WRT54G_DIR)/.source
-	$(SOURCE_DIR)/patch-kernel.sh $(WRT54G_DIR) $(SOURCE_DIR) openwrt-wrt54g-router.patch
-	$(SOURCE_DIR)/patch-kernel.sh $(WRT54G_DIR) $(SOURCE_DIR) openwrt-wrt54g-shared.patch
+	$(SOURCE_DIR)/patch-kernel.sh $(WRT54G_DIR) $(SOURCE_DIR)/openwrt/patches
 	touch $(WRT54G_DIR)/.prepared
 
 ######################################################################
@@ -236,8 +220,8 @@ openwrt-prune:
 ######################################################################
 
 wrt-tools:
-	$(CC) -o $(WRT54G_DIR)/release/tools/trx $(SOURCE_DIR)/trx.c
-	$(CC) -o $(WRT54G_DIR)/release/tools/addpattern $(SOURCE_DIR)/addpattern.c
+	$(CC) -o $(WRT54G_DIR)/release/tools/trx $(SOURCE_DIR)/openwrt/tools/trx.c
+	$(CC) -o $(WRT54G_DIR)/release/tools/addpattern $(SOURCE_DIR)/openwrt/tools/addpattern.c
 
 openwrt-linux.trx:  openwrt-prune squashfsroot wrt-tools
 	$(WRT54G_DIR)/release/tools/trx -o openwrt-linux.trx \
@@ -253,24 +237,4 @@ openwrt-g-code.bin: openwrt-gs-code.bin
 openwrt-code.bin: openwrt-gs-code.bin openwrt-g-code.bin
 
 ######################################################################
-
-openwrt-sourceball:
-	tar cjf buildroot-openwrt.tar.bz2 \
-		README.openwrt \
-		Makefile \
-		Makefile-openwrt \
-		make/openwrt.mk \
-		make/uclibc.mk \
-		make/busybox.mk \
-		sources/uClibc.config \
-		sources/uClibc.config-openwrt \
-		sources/busybox-openwrt-*.patch \
-		sources/busybox.config \
-		sources/busybox.config-openwrt \
-		sources/dnsmasq1-openwrt.patch \
-		sources/iptables-openwrt-extensions.patch \
-		sources/openwrt-wrt54g-linux.config \
-		sources/openwrt-wrt54g-*.patch \
-		sources/openwrt-diag.c
-
 endif

obsolete-buildroot/make/zlib.mk

@@ -66,7 +66,7 @@ zlib: uclibc $(TARGET_DIR)/lib/libz.so.1.1.4
 
 $(ZLIB_IPK): uclibc $(STAGING_DIR)/lib/libz.so.1.1.4
 	mkdir -p $(ZLIB_IPK_DIR)/CONTROL
-	cp $(SOURCE_DIR)/zlib.control $(ZLIB_IPK_DIR)/CONTROL/control
+	cp $(SOURCE_DIR)/openwrt/ipkg/zlib/control $(ZLIB_IPK_DIR)/CONTROL/control
 	mkdir -p $(ZLIB_IPK_DIR)/lib
 	cp -dpf $(STAGING_DIR)/lib/libz.so* $(ZLIB_IPK_DIR)/lib;
 	-$(STRIP) --strip-unneeded $(ZLIB_IPK_DIR)/lib/libz.so*

obsolete-buildroot/sources/busybox-openwrt-120-udhcp.patch

@@ -1,129 +0,0 @@
-diff -urN busybox-dist/networking/udhcp/dumpleases.c busybox/networking/udhcp/dumpleases.c
---- busybox-dist/networking/udhcp/dumpleases.c	2004-03-15 02:29:00.000000000 -0600
-+++ busybox/networking/udhcp/dumpleases.c	2004-03-16 09:52:32.000000000 -0600
-@@ -42,7 +42,7 @@
- #endif
- {
- 	FILE *fp;
--	int i, c, mode = REMAINING;
-+	int i, c, mode = ABSOLUTE;
- 	long expires;
- 	const char *file = LEASES_FILE;
- 	struct dhcpOfferedAddr lease;
-@@ -73,7 +73,7 @@
- 
- 	fp = xfopen(file, "r");
- 
--	printf("Mac Address       IP-Address      Expires %s\n", mode == REMAINING ? "in" : "at");
-+	printf("Mac Address       IP-Address      Hostname        Expires %s\n", mode == REMAINING ? "in" : "at");
- 	/*     "00:00:00:00:00:00 255.255.255.255 Wed Jun 30 21:49:08 1993" */
- 	while (fread(&lease, sizeof(lease), 1, fp)) {
- 
-@@ -84,7 +84,8 @@
- 		addr.s_addr = lease.yiaddr;
- 		printf(" %-15s", inet_ntoa(addr));
- 		expires = ntohl(lease.expires);
--		printf(" ");
-+		//expires = lease.expires;
-+		printf(" %-15s ",lease.hostname);
- 		if (mode == REMAINING) {
- 			if (!expires) printf("expired\n");
- 			else {
-diff -urN busybox-dist/networking/udhcp/files.c busybox/networking/udhcp/files.c
---- busybox-dist/networking/udhcp/files.c	2004-03-15 02:29:00.000000000 -0600
-+++ busybox/networking/udhcp/files.c	2004-03-16 09:50:04.000000000 -0600
-@@ -281,7 +281,7 @@
- 		if (lease.yiaddr >= server_config.start && lease.yiaddr <= server_config.end) {
- 			lease.expires = ntohl(lease.expires);
- 			if (!server_config.remaining) lease.expires -= time(0);
--			if (!(add_lease(lease.chaddr, lease.yiaddr, lease.expires))) {
-+			if (!(add_lease(lease.hostname, lease.chaddr, lease.yiaddr, lease.expires))) {
- 				LOG(LOG_WARNING, "Too many leases while loading %s\n", file);
- 				break;
- 			}
-diff -urN busybox-dist/networking/udhcp/leases.c busybox/networking/udhcp/leases.c
---- busybox-dist/networking/udhcp/leases.c	2004-03-15 02:29:00.000000000 -0600
-+++ busybox/networking/udhcp/leases.c	2004-03-16 09:50:04.000000000 -0600
-@@ -35,7 +35,7 @@
- 
- 
- /* add a lease into the table, clearing out any old ones */
--struct dhcpOfferedAddr *add_lease(uint8_t *chaddr, uint32_t yiaddr, unsigned long lease)
-+struct dhcpOfferedAddr *add_lease(uint8_t *hostname, uint8_t *chaddr, uint32_t yiaddr, unsigned long lease)
- {
- 	struct dhcpOfferedAddr *oldest;
- 
-@@ -45,6 +45,13 @@
- 	oldest = oldest_expired_lease();
- 
- 	if (oldest) {
-+		if (hostname) {
-+			uint8_t length = *(hostname-1);
-+			if (length>15) length=15;
-+			memcpy(oldest->hostname,hostname,length);
-+			oldest->hostname[length]=0;
-+		}
-+		
- 		memcpy(oldest->chaddr, chaddr, 16);
- 		oldest->yiaddr = yiaddr;
- 		oldest->expires = time(0) + lease;
-@@ -112,7 +119,7 @@
- 		temp.s_addr = addr;
- 		LOG(LOG_INFO, "%s belongs to someone, reserving it for %ld seconds",
- 			inet_ntoa(temp), server_config.conflict_time);
--		add_lease(blank_chaddr, addr, server_config.conflict_time);
-+		add_lease(blank_chaddr, blank_chaddr, addr, server_config.conflict_time);
- 		return 1;
- 	} else return 0;
- }
-diff -urN busybox-dist/networking/udhcp/leases.h busybox/networking/udhcp/leases.h
---- busybox-dist/networking/udhcp/leases.h	2004-01-30 17:45:12.000000000 -0600
-+++ busybox/networking/udhcp/leases.h	2004-03-16 09:50:04.000000000 -0600
-@@ -4,6 +4,7 @@
- 
- 
- struct dhcpOfferedAddr {
-+	uint8_t hostname[16];
- 	uint8_t chaddr[16];
- 	uint32_t yiaddr;	/* network order */
- 	uint32_t expires;	/* host order */
-@@ -12,7 +13,7 @@
- extern uint8_t blank_chaddr[];
- 
- void clear_lease(uint8_t *chaddr, uint32_t yiaddr);
--struct dhcpOfferedAddr *add_lease(uint8_t *chaddr, uint32_t yiaddr, unsigned long lease);
-+struct dhcpOfferedAddr *add_lease(uint8_t *hostname, uint8_t *chaddr, uint32_t yiaddr, unsigned long lease);
- int lease_expired(struct dhcpOfferedAddr *lease);
- struct dhcpOfferedAddr *oldest_expired_lease(void);
- struct dhcpOfferedAddr *find_lease_by_chaddr(uint8_t *chaddr);
-diff -urN busybox-dist/networking/udhcp/serverpacket.c busybox/networking/udhcp/serverpacket.c
---- busybox-dist/networking/udhcp/serverpacket.c	2004-03-15 02:29:01.000000000 -0600
-+++ busybox/networking/udhcp/serverpacket.c	2004-03-16 09:51:36.000000000 -0600
-@@ -29,6 +29,7 @@
- #include "dhcpd.h"
- #include "options.h"
- #include "common.h"
-+#include "files.h"
- 
- /* send a packet to giaddr using the kernel ip stack */
- static int send_packet_to_relay(struct dhcpMessage *payload)
-@@ -152,7 +153,7 @@
- 		return -1;
- 	}
- 
--	if (!add_lease(packet.chaddr, packet.yiaddr, server_config.offer_time)) {
-+	if (!add_lease(get_option(oldpacket, DHCP_HOST_NAME), packet.chaddr, packet.yiaddr, server_config.offer_time)) {
- 		LOG(LOG_WARNING, "lease pool is full -- OFFER abandoned");
- 		return -1;
- 	}
-@@ -233,7 +234,9 @@
- 	if (send_packet(&packet, 0) < 0)
- 		return -1;
- 
--	add_lease(packet.chaddr, packet.yiaddr, lease_time_align);
-+	add_lease(get_option(oldpacket, DHCP_HOST_NAME), packet.chaddr, packet.yiaddr, lease_time_align);
-+
-+	write_leases();
- 
- 	return 0;
- }

obsolete-buildroot/sources/device_table.txt

@@ -1,163 +0,0 @@
-# When building a target filesystem, it is desirable to not have to
-# become root and then run 'mknod' a thousand times.  Using a device 
-# table you can create device nodes and directories "on the fly".
-#
-# This is a sample device table file for use with genext2fs.  You can
-# do all sorts of interesting things with a device table file.  For
-# example, if you want to adjust the permissions on a particular file
-# you can just add an entry like:
-#   /sbin/foobar        f       2755    0       0       -       -       -       -       -
-# and (assuming the file /sbin/foobar exists) it will be made setuid
-# root (regardless of what its permissions are on the host filesystem.
-# Furthermore, you can use a single table entry to create a many device
-# minors.  For example, if I wanted to create /dev/hda and /dev/hda[0-15]
-# I could just use the following two table entries:
-#   /dev/hda    b       640     0       0       3       0       0       0       -
-#   /dev/hda    b       640     0       0       3       1       1       1       15
-# 
-# Device table entries take the form of:
-# <name>    <type>      <mode>  <uid>   <gid>   <major> <minor> <start> <inc>   <count>
-# where name is the file name,  type can be one of: 
-#       f       A regular file
-#       d       Directory
-#       c       Character special device file
-#       b       Block special device file
-#       p       Fifo (named pipe)
-# uid is the user id for the target file, gid is the group id for the
-# target file.  The rest of the entries (major, minor, etc) apply only 
-# to device special files.
-
-# Have fun
-# -Erik Andersen <andersen@codepoet.org>
-#
-
-#<name>		<type>	<mode>	<uid>	<gid>	<major>	<minor>	<start>	<inc>	<count>
-/dev		d	755	0	0	-	-	-	-	-
-/dev		d	755	0	0	-	-	-	-	-
-/dev/pts	d	755	0	0	-	-	-	-	-
-/tmp		d	1777	0	0	-	-	-	-	-
-/etc		d	755	0	0	-	-	-	-	-
-/home/default	d	2755	1000	1000	-	-	-	-	-
-/etc/network/if-up.d		d	755	0	0	-	-	-	-	-
-/etc/network/if-pre-up.d	d	755	0	0	-	-	-	-	-
-/etc/network/if-down.d		d	755	0	0	-	-	-	-	-
-/etc/network/if-post-down.d	d	755	0	0	-	-	-	-	-
-# Adjust permissions on some normal files
-/etc/shadow	f	600	0	0	-	-	-	-	-
-/etc/passwd	f	644	0	0	-	-	-	-	-
-/bin/busybox	f	4755	0	0	-	-	-	-	-
-# uncomment this to allow starting x as non-root
-#/usr/X11R6/bin/Xfbdev		f	4755	0	0	-	-	-	-	-
-
-# Normal system devices
-/dev/mem	c	640	0	0	1	1	0	0	-
-/dev/kmem	c	640	0	0	1	2	0	0	-
-/dev/null	c	666	0	0	1	3	0	0	-
-/dev/zero	c	666	0	0	1	5	0	0	-
-/dev/random	c	666	0	0	1	8	0	0	-
-/dev/urandom	c	666	0	0	1	9	0	0	-
-/dev/ram	b	640	0	0	1	1	0	0	-
-/dev/ram	b	640	0	0	1	0	0	1	4
-/dev/loop	b	640	0	0	7	0	0	1	2
-/dev/rtc	c	640	0	0	10	135	-	-	-
-/dev/console	c	666	0	0	5	1	-	-	-
-/dev/tty	c	666	0	0	5	0	-	-	-
-/dev/tty	c	666	0	0	4	0	0	1	8
-/dev/ttyp	c	666	0	0	3	0	0	1	10
-/dev/ptyp	c       666     0       0       2       0       0       1       10
-/dev/ptmx	c	666	0	0	5	2	-	-	-
-/dev/ttyP	c	666	0	0	57	0	0	1	4
-/dev/ttyS	c	666	0	0	4	64	0	1	4
-/dev/fb		c	640	0	5	29	0	0	32	4
-#/dev/ttySA	c	666	0	0	204	5	0	1	3
-/dev/psaux	c	666	0	0	10	1	0	0	-
-#/dev/ppp	c	666	0	0	108	0	-	-	-
-
-# MTD stuff
-/dev/mtd	c	640	0	0	90	0	0	2	4
-/dev/mtdblock	b	640	0	0	31	0	0	1	4
-
-#Tun/tap driver
-/dev/net	d	755	0	0	-	-	-	-	-
-/dev/net/tun	c	660	0	0	10	200	-	-	-
-
-# Audio stuff
-#/dev/audio	c	666	0	29	14	4	-	-	-
-#/dev/audio1	c	666	0	29	14	20	-	-	-
-#/dev/dsp	c	666	0	29	14	3	-	-	-
-#/dev/dsp1	c	666	0	29	14	19	-	-	-
-#/dev/sndstat	c	666	0	29	14	6	-	-	-
-
-# User-mode Linux stuff
-/dev/ubda	b	640	0	0	98	0	0	0	-
-/dev/ubda	b	640	0	0	98	1	1	1	15
-
-# IDE Devices
-/dev/hda	b	640	0	0	3	0	0	0	-
-/dev/hda	b	640	0	0	3	1	1	1	15
-/dev/hdb	b	640	0	0	3	64	0	0	-
-/dev/hdb	b	640	0	0	3	65	1	1	15
-#/dev/hdc	b	640	0	0	22	0	0	0	-
-#/dev/hdc	b	640	0	0	22	1	1	1	15
-#/dev/hdd	b	640	0	0	22	64	0	0	-
-#/dev/hdd	b	640	0	0	22	65	1	1	15
-#/dev/hde	b	640	0	0	33	0	0	0	-
-#/dev/hde	b	640	0	0	33	1	1	1	15
-#/dev/hdf	b	640	0	0	33	64	0	0	-
-#/dev/hdf	b	640	0	0	33	65	1	1	15
-#/dev/hdg	b	640	0	0	34	0	0	0	-
-#/dev/hdg	b	640	0	0	34	1	1	1	15
-#/dev/hdh	b	640	0	0	34	64	0	0	-
-#/dev/hdh	b	640	0	0	34	65	1	1	15
-
-# SCSI Devices
-#/dev/sda	b	640	0	0	8	0	0	0	-
-#/dev/sda	b	640	0	0	8	1	1	1	15
-#/dev/sdb	b	640	0	0	8	16	0	0	-
-#/dev/sdb	b	640	0	0	8	17	1	1	15
-#/dev/sdc	b	640	0	0	8	32	0	0	-
-#/dev/sdc	b	640	0	0	8	33	1	1	15
-#/dev/sdd	b	640	0	0	8	48	0	0	-
-#/dev/sdd	b	640	0	0	8	49	1	1	15
-#/dev/sde	b	640	0	0	8	64	0	0	-
-#/dev/sde	b	640	0	0	8	65	1	1	15
-#/dev/sdf	b	640	0	0	8	80	0	0	-
-#/dev/sdf	b	640	0	0	8	81	1	1	15
-#/dev/sdg	b	640	0	0	8	96	0	0	-
-#/dev/sdg	b	640	0	0	8	97	1	1	15
-#/dev/sdh	b	640	0	0	8	112	0	0	-
-#/dev/sdh	b	640	0	0	8	113	1	1	15
-#/dev/sg	c	640	0	0	21	0	0	1	15
-#/dev/scd	b	640	0	0	11	0	0	1	15
-#/dev/st	c	640	0	0	9	0	0	1	8
-#/dev/nst	c	640	0	0	9	128	0	1	8
-#/dev/st	c	640	0	0	9	32	1	1	4
-#/dev/st	c	640	0	0	9	64	1	1	4
-#/dev/st	c	640	0	0	9	96	1	1	4
-
-# Floppy disk devices
-#/dev/fd	b	640	0	0	2	0	0	1	2
-#/dev/fd0d360	b	640	0	0	2	4	0	0	-
-#/dev/fd1d360	b	640	0	0	2	5	0	0	-
-#/dev/fd0h1200	b	640	0	0	2	8	0	0	-
-#/dev/fd1h1200	b	640	0	0	2	9	0	0	-
-#/dev/fd0u1440	b	640	0	0	2	28	0	0	-
-#/dev/fd1u1440	b	640	0	0	2	29	0	0	-
-#/dev/fd0u2880	b	640	0	0	2	32	0	0	-
-#/dev/fd1u2880	b	640	0	0	2	33	0	0	-
-
-# All the proprietary cdrom devices in the world
-#/dev/aztcd	b	640	0	0	29	0	0	0	-
-#/dev/bpcd	b	640	0	0	41	0	0	0	-
-#/dev/capi20	c	640	0	0	68	0	0	1	2
-#/dev/cdu31a	b	640	0	0	15	0	0	0	-
-#/dev/cdu535	b	640	0	0	24	0	0	0	-
-#/dev/cm206cd	b	640	0	0	32	0	0	0	-
-#/dev/sjcd	b	640	0	0	18	0	0	0	-
-#/dev/sonycd	b	640	0	0	15	0	0	0	-
-#/dev/gscd	b	640	0	0	16	0	0	0	-
-#/dev/sbpcd	b	640	0	0	25	0	0	0	-
-#/dev/sbpcd	b	640	0	0	25	0	0	1	4
-#/dev/mcd	b	640	0	0	23	0	0	0	-
-#/dev/optcd	b	640	0	0	17	0	0	0	-
-

obsolete-buildroot/sources/dnsmasq1-openwrt.patch

@@ -1,219 +0,0 @@
-diff -x CVS -urN dnsmasq-1.18/dhcp.c dnsmasq.old/dhcp.c
---- dnsmasq-1.18/dhcp.c	2003-11-05 08:30:20.000000000 -0600
-+++ dnsmasq.old/dhcp.c	2004-01-05 23:40:11.000000000 -0600
-@@ -15,14 +15,20 @@
- 
- #include "dnsmasq.h"
- 
--static int next_token (char *token, int buffsize, FILE * fp);
-+struct dhcpOfferedAddr {
-+        u_int8_t hostname[16];
-+        u_int8_t chaddr[16];
-+        u_int32_t yiaddr;       /* network order */
-+        u_int32_t expires;      /* host order */
-+};
- 
- void load_dhcp(char *file, char *suffix, time_t now, char *hostname)
- {
--  char token[MAXTOK], *dot;
-+  char *dot;
-   struct all_addr host_address;
--  time_t ttd, tts;
-+  time_t ttd;
-   FILE *fp = fopen (file, "r");
-+  struct dhcpOfferedAddr lease;
-   
-   if (!fp)
-     {
-@@ -34,154 +40,45 @@
- 
-   /* remove all existing DHCP cache entries */
-   cache_unhash_dhcp();
--  
--  while ((next_token(token, MAXTOK, fp)))
--    {
--      if (strcmp(token, "lease") == 0)
--        {
--          hostname[0] = '\0';
--	  ttd = tts = (time_t)(-1);
--#ifdef HAVE_IPV6
--          if (next_token(token, MAXTOK, fp) && 
--	      inet_pton(AF_INET, token, &host_address))
--#else
--	  if (next_token(token, MAXTOK, fp) && 
--	      (host_address.addr4.s_addr = inet_addr(token)) != (in_addr_t) -1)
--#endif
--            {
--              if (next_token(token, MAXTOK, fp) && *token == '{')
--                {
--                  while (next_token(token, MAXTOK, fp) && *token != '}')
-+
-+  while (fread(&lease, sizeof(lease), 1, fp)) {  
-+	  host_address.addr.addr4.s_addr = lease.yiaddr;
-+
-+	strcpy(hostname,lease.hostname);
-+	if (lease.expires>(unsigned)now)
-+	ttd = lease.expires;
-+	else
-+	ttd = -1;
-+                  dot = strchr(hostname, '.');
-+                  if (suffix)
-                     {
--                      if ((strcmp(token, "client-hostname") == 0) ||
--			  (strcmp(token, "hostname") == 0))
--			{
--			  if (next_token(hostname, MAXDNAME, fp))
--			    if (!canonicalise(hostname))
--			      {
--				*hostname = 0;
--				syslog(LOG_ERR, "bad name in %s", file); 
--			      }
--			}
--                      else if ((strcmp(token, "ends") == 0) ||
--			       (strcmp(token, "starts") == 0))
--                        {
--                          struct tm lease_time;
--			  int is_ends = (strcmp(token, "ends") == 0);
--			  if (next_token(token, MAXTOK, fp) &&  /* skip weekday */
--			      next_token(token, MAXTOK, fp) &&  /* Get date from lease file */
--			      sscanf (token, "%d/%d/%d", 
--				      &lease_time.tm_year,
--				      &lease_time.tm_mon,
--				      &lease_time.tm_mday) == 3 &&
--			      next_token(token, MAXTOK, fp) &&
--			      sscanf (token, "%d:%d:%d:", 
--				      &lease_time.tm_hour,
--				      &lease_time.tm_min, 
--				      &lease_time.tm_sec) == 3)
--			    {
--			      /* There doesn't seem to be a universally available library function
--				 which converts broken-down _GMT_ time to seconds-in-epoch.
--				 The following was borrowed from ISC dhcpd sources, where
--                                 it is noted that it might not be entirely accurate for odd seconds.
--				 Since we're trying to get the same answer as dhcpd, that's just
--				 fine here. */
--			      static int months [11] = { 31, 59, 90, 120, 151, 181,
--							 212, 243, 273, 304, 334 };
--			      time_t time = ((((((365 * (lease_time.tm_year - 1970) + /* Days in years since '70 */
--						  (lease_time.tm_year - 1969) / 4 +   /* Leap days since '70 */
--						  (lease_time.tm_mon > 1                /* Days in months this year */
--						   ? months [lease_time.tm_mon - 2]
--						   : 0) +
--						  (lease_time.tm_mon > 2 &&         /* Leap day this year */
--						   !((lease_time.tm_year - 1972) & 3)) +
--						  lease_time.tm_mday - 1) * 24) +   /* Day of month */
--						lease_time.tm_hour) * 60) +
--					      lease_time.tm_min) * 60) + lease_time.tm_sec;
--			      if (is_ends)
--				ttd = time;
--			      else
--				tts = time;			    }
-+                      if (dot)
-+                        { /* suffix and lease has ending: must match */
-+                          if (strcmp(dot+1, suffix) != 0)
-+                            syslog(LOG_WARNING,
-+                                   "Ignoring DHCP lease for %s because it has an illegal domain part", hostname);
-+                          else
-+                            cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
-                         }
--		    }
--		  
--		  /* missing info? */
--		  if (!*hostname)
--		    continue;
--		  if (ttd == (time_t)(-1))
--		    continue;
--		  
--		  /* infinite lease to is represented by -1 */
--		  /* This makes is to the lease file as 
--		     start time one less than end time. */
--		  /* We use -1 as infinite in ttd */
--		  if ((tts != -1) && (ttd == tts - 1))
--		    ttd = (time_t)(-1);
--		  else if (ttd < now)
--		    continue;
--
--		  dot = strchr(hostname, '.');
--		  if (suffix)
--		    { 
--		      if (dot) 
--			{ /* suffix and lease has ending: must match */
--			  if (strcmp(dot+1, suffix) != 0)
--			    syslog(LOG_WARNING, 
--				   "Ignoring DHCP lease for %s because it has an illegal domain part", hostname);
--			  else
--			    cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
--			}
--		      else
--			{ /* suffix exists but lease has no ending - add lease and lease.suffix */
--			  cache_add_dhcp_entry(hostname, &host_address, ttd, 0);
--			  strncat(hostname, ".", MAXDNAME);
--			  strncat(hostname, suffix, MAXDNAME);
--			  hostname[MAXDNAME-1] = 0; /* in case strncat hit limit */
--			  /* Make FQDN canonical for reverse lookups */
--			  cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
--			}
--		    }
--		  else
--		    { /* no suffix */
--		      if (dot) /* no lease ending allowed */
--			syslog(LOG_WARNING, 
--			       "Ignoring DHCP lease for %s because it has a domain part", hostname);
--		      else
--			cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
--		    }
--		}
--	    }
--	}
--    }
-+                      else
-+                        { /* suffix exists but lease has no ending - add lease and lease.suffix */
-+                          cache_add_dhcp_entry(hostname, &host_address, ttd, 0);
-+                          strncat(hostname, ".", MAXDNAME);
-+                          strncat(hostname, suffix, MAXDNAME);
-+                          hostname[MAXDNAME-1] = 0; /* in case strncat hit limit */
-+                          /* Make FQDN canonical for reverse lookups */
-+                          cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
-+                        }
-+                    }
-+                  else
-+                    { /* no suffix */
-+                      if (dot) /* no lease ending allowed */
-+                        syslog(LOG_WARNING,
-+                               "Ignoring DHCP lease for %s because it has a domain part", hostname);
-+                      else
-+                        cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
-+                    }
-+  }
-   fclose(fp);
-   
- }
--
--static int next_token (char *token, int buffsize, FILE * fp)
--{
--  int c, count = 0;
--  char *cp = token;
--  
--  while((c = getc(fp)) != EOF)
--    {
--      if (c == '#')
--	do { c = getc(fp); } while (c != '\n' && c != EOF);
--      
--      if (c == ' ' || c == '\t' || c == '\n' || c == ';')
--	{
--	  if (count)
--	    break;
--	}
--      else if ((c != '"') && (count<buffsize-1))
--	{
--	  *cp++ = c;
--	  count++;
--	}
--    }
--  
--  *cp = 0;
--  return count ? 1 : 0;
--}
--
--
--

obsolete-buildroot/sources/linux.config

@@ -1,877 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_X86=y
-# CONFIG_SBUS is not set
-CONFIG_UID16=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor type and features
-#
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-CONFIG_MELAN=y
-# CONFIG_MCRUSOE is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_XADD=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_POPAD_OK=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_X86_L1_CACHE_SHIFT=4
-CONFIG_X86_USE_STRING_486=y
-CONFIG_X86_ALIGNMENT_16=y
-CONFIG_X86_F00F_WORKS_OK=y
-# CONFIG_X86_MCE is not set
-# CONFIG_TOSHIBA is not set
-# CONFIG_I8K is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_CPUID is not set
-# CONFIG_EDD is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_MATH_EMULATION=y
-CONFIG_MTRR=y
-# CONFIG_SMP is not set
-# CONFIG_X86_UP_APIC is not set
-# CONFIG_X86_UP_IOAPIC is not set
-# CONFIG_X86_TSC_DISABLE is not set
-
-#
-# General setup
-#
-CONFIG_NET=y
-CONFIG_PCI=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_ISA=y
-CONFIG_PCI_NAMES=y
-CONFIG_EISA=y
-CONFIG_MCA=y
-CONFIG_HOTPLUG=y
-
-#
-# PCMCIA/CardBus support
-#
-CONFIG_PCMCIA=m
-CONFIG_CARDBUS=y
-CONFIG_TCIC=y
-CONFIG_I82092=y
-CONFIG_I82365=y
-
-#
-# PCI Hotplug Support
-#
-CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_OOM_KILLER is not set
-CONFIG_PM=y
-CONFIG_APM=y
-# CONFIG_APM_IGNORE_USER_SUSPEND is not set
-CONFIG_APM_DO_ENABLE=y
-# CONFIG_APM_CPU_IDLE is not set
-# CONFIG_APM_DISPLAY_BLANK is not set
-CONFIG_APM_RTC_IS_GMT=y
-CONFIG_APM_ALLOW_INTS=y
-CONFIG_APM_REAL_MODE_POWER_OFF=y
-
-#
-# ACPI Support
-#
-# CONFIG_ACPI is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_PS2 is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_CISS_MONITOR_THREAD is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_STATS is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_FILTER=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_NAT=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_TOS=y
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_INET_ECN=y
-# CONFIG_SYN_COOKIES is not set
-
-#
-#   IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_FTP=y
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_TFTP=y
-CONFIG_IP_NF_IRC=y
-CONFIG_IP_NF_QUEUE=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=y
-CONFIG_IP_NF_MATCH_MAC=y
-CONFIG_IP_NF_MATCH_PKTTYPE=y
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=y
-CONFIG_IP_NF_MATCH_RECENT=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_DSCP=y
-CONFIG_IP_NF_MATCH_AH_ESP=y
-CONFIG_IP_NF_MATCH_LENGTH=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_MATCH_TCPMSS=y
-CONFIG_IP_NF_MATCH_HELPER=y
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=y
-CONFIG_IP_NF_MATCH_UNCLEAN=y
-CONFIG_IP_NF_MATCH_OWNER=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_MIRROR=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_NAT_LOCAL=y
-CONFIG_IP_NF_NAT_SNMP_BASIC=y
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=y
-CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP_NF_TARGET_DSCP=y
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_IP_NF_TARGET_ULOG=y
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_ARPTABLES=y
-CONFIG_IP_NF_ARPFILTER=y
-CONFIG_IP_NF_ARP_MANGLE=y
-
-#
-#   IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
-
-#
-#    SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-CONFIG_SCTP_HMAC_SHA1=y
-# CONFIG_SCTP_HMAC_MD5 is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-
-#
-#  
-#
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_DECNET is not set
-CONFIG_BRIDGE=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_CSZ=y
-CONFIG_NET_SCH_HFSC=y
-CONFIG_NET_SCH_PRIO=y
-CONFIG_NET_SCH_RED=y
-CONFIG_NET_SCH_SFQ=y
-CONFIG_NET_SCH_TEQL=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_NET_SCH_GRED=y
-CONFIG_NET_SCH_DSMARK=y
-CONFIG_NET_SCH_INGRESS=y
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=y
-CONFIG_NET_CLS_U32=y
-CONFIG_NET_CLS_RSVP=y
-CONFIG_NET_CLS_RSVP6=y
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-# CONFIG_PHONE_IXJ is not set
-# CONFIG_PHONE_IXJ_PCMCIA is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-CONFIG_IDEDISK_STROKE=y
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDEDMA_PCI_WIP=y
-# CONFIG_BLK_DEV_ADMA100 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_WDC_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_AMD74XX_OVERRIDE is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_HPT34X_AUTODMA is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_PDC202XX_BURST is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_DMA_NONPCI is not set
-# CONFIG_BLK_DEV_ATARAID is not set
-# CONFIG_BLK_DEV_ATARAID_PDC is not set
-# CONFIG_BLK_DEV_ATARAID_HPT is not set
-# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
-# CONFIG_BLK_DEV_ATARAID_SII is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_BOOT is not set
-# CONFIG_FUSION_ISENSE is not set
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LAN is not set
-
-#
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=y
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_SKMC is not set
-# CONFIG_NE2_MCA is not set
-# CONFIG_IBMLANA is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_TULIP is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_DGRS is not set
-# CONFIG_DM9102 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_LNE390 is not set
-# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=y
-# CONFIG_NE2K_PCI is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_NE3210 is not set
-# CONFIG_ES3210 is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNDANCE_MMIO is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_STRIP is not set
-# CONFIG_WAVELAN is not set
-# CONFIG_ARLAN is not set
-# CONFIG_AIRONET4500 is not set
-# CONFIG_AIRONET4500_NONCS is not set
-# CONFIG_AIRONET4500_PROC is not set
-# CONFIG_AIRO is not set
-CONFIG_HERMES=m
-CONFIG_HOSTAP=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_HOSTAP_PLX is not set
-# CONFIG_HOSTAP_PCI is not set
-
-#
-# Wireless Pcmcia cards support
-#
-CONFIG_PCMCIA_HERMES=m
-CONFIG_HOSTAP_CS=m
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_ATMEL is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-
-#
-# Input core support is needed for gameports
-#
-
-#
-# Input core support is needed for joysticks
-#
-# CONFIG_QIC02_TAPE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPMI_PANIC_EVENT is not set
-# CONFIG_IPMI_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_KCS is not set
-# CONFIG_IPMI_WATCHDOG is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_SCx200 is not set
-# CONFIG_SCx200_GPIO is not set
-CONFIG_AMD_RNG=y
-# CONFIG_INTEL_RNG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_AMD_PM768 is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_SONYPI is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-
-#
-# Direct Rendering Manager (XFree86 DRI support)
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_PCMCIA_SERIAL_CS is not set
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_MWAVE is not set
-# CONFIG_OBMOUSE is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_QFMT_V2 is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BEFS_DEBUG is not set
-# CONFIG_BFS_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-# CONFIG_UMSDOS_FS is not set
-CONFIG_VFAT_FS=y
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_TRACE is not set
-# CONFIG_XFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_LOCKD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SMB_NLS is not set
-CONFIG_NLS=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Console drivers
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_VIDEO_SELECT is not set
-# CONFIG_MDA_CONSOLE is not set
-
-#
-# Frame-buffer support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# Support for USB gadgets
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BLUEZ is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=0
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_OPTIMIZE_FOR_SIZE=y
-CONFIG_CRC32=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-# CONFIG_FW_LOADER is not set

obsolete-buildroot/sources/openwrt/ipkg/pppoecd/CONTROL/prerm

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+killall pppoecd
+sleep 3
+killall -9 pppoecd

obsolete-buildroot/sources/openwrt/ipkg/zlib/control

@@ -0,0 +1,10 @@
+Package: zlib
+Priority: optional
+Version: 1.1.4-1
+Architecture: mipsel
+Maintainer: below0
+Section: libs
+Source: Embedded in the main OpenWrt buildroot
+Description: zlib is a library implementing the 'deflate' compression system used by many programs.
+
+

obsolete-buildroot/sources/openwrt/kernel/linux.config

@@ -351,6 +351,7 @@ CONFIG_IP_NF_MATCH_CONNTRACK=m
 CONFIG_IP_NF_MATCH_UNCLEAN=m
 CONFIG_IP_NF_MATCH_STRING=m
 # CONFIG_IP_NF_MATCH_OWNER is not set
+CONFIG_IP_NF_MATCH_PHYSDEV=m
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
 CONFIG_IP_NF_TARGET_NETLINK=m
@@ -432,6 +433,25 @@ CONFIG_VLAN_8021Q=y
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_DECNET is not set
 CONFIG_BRIDGE=y
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_IPF=m
+CONFIG_BRIDGE_EBT_ARPF=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_VLANF=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_MARKF=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
 # CONFIG_LLC is not set

obsolete-buildroot/sources/openwrt/tools/trx.c

@@ -0,0 +1,316 @@
+/*
+ * Copyright (C) 2004  Manuel Novoa III  <mjn3@codepoet.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* July 29, 2004
+ *
+ * This is a hacked replacement for the 'trx' utility used to create
+ * wrt54g .trx firmware files.  It isn't pretty, but it does the job
+ * for me.
+ *
+ * As an extension, you can specify a larger maximum length for the
+ * .trx file using '-m'.  It will be rounded up to be a multiple of 4K.
+ * NOTE: This space will be malloc()'d.
+ *
+ * TODO: Support '-b' option to specify offsets for each file.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <stdint.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+
+uint32_t crc32buf(char *buf, size_t len);
+
+/**********************************************************************/
+/* from trxhdr.h */
+
+#define TRX_MAGIC	0x30524448	/* "HDR0" */
+#define TRX_VERSION	1
+#define TRX_MAX_LEN	0x3A0000
+#define TRX_NO_HEADER	1		/* Do not write TRX header */	
+
+struct trx_header {
+	uint32_t magic;			/* "HDR0" */
+	uint32_t len;			/* Length of file including header */
+	uint32_t crc32;			/* 32-bit CRC from flag_version to end of file */
+	uint32_t flag_version;	/* 0:15 flags, 16:31 version */
+	uint32_t offsets[3];	/* Offsets of partitions from start of header */
+};
+
+/**********************************************************************/
+
+void usage(void) __attribute__ (( __noreturn__ ));
+
+void usage(void)
+{
+	fprintf(stderr, "Usage: trx [-o outfile] [-m maxlen] file [file [file]]\n");
+	exit(EXIT_FAILURE);
+}
+
+int main(int argc, char **argv)
+{
+	FILE *out = stdout;
+	FILE *in;
+	char *ofn = NULL;
+	char *buf;
+	char *e;
+	int c, i;
+	size_t n;
+	unsigned long maxlen = TRX_MAX_LEN;
+	struct trx_header *p;
+
+	fprintf(stderr, "mjn3's trx replacement - v0.80\n");
+
+	while ((c = getopt(argc, argv, "o:m:")) != -1) {
+		switch (c) {
+			case 'o':
+				ofn = optarg;
+				break;
+			case 'm':
+				errno = 0;
+				maxlen = strtoul(optarg, &e, 0);
+				if (errno || (e == optarg) || *e) {
+					fprintf(stderr, "illegal numeric string\n");
+					usage();
+				}
+#undef  ROUND
+#define ROUND 0x1000
+				if (maxlen & (ROUND-1)) {
+					maxlen += (ROUND - (maxlen & (ROUND-1)));
+				}
+				if (maxlen < ROUND) {
+					fprintf(stderr, "maxlen too small (or wrapped)\n");
+					usage();
+				}
+				break;
+			default:
+				usage();
+		}
+	}
+
+	if (ofn && !(out = fopen(ofn, "w"))) {
+		fprintf(stderr, "can not open \"%s\" for writing\n", ofn);
+		usage();
+	}
+
+	if (optind == argc) {
+		fprintf(stderr, "we require at least one arg\n");
+		usage();
+	}
+
+	if (argc - optind > 3) {
+		fprintf(stderr, "too many args: %d > 3\n", argc - optind);
+		usage();
+	}
+
+	if (maxlen > TRX_MAX_LEN) {
+		fprintf(stderr, "WARNING: maxlen exceeds default maximum!  Beware of overwriting nvram!\n");
+	}
+
+	if (!(buf = malloc(maxlen))) {
+		fprintf(stderr, "malloc failed\n");
+		return EXIT_FAILURE;
+	}
+
+	p = (struct trx_header *) buf;
+
+	p->magic = TRX_MAGIC;
+	p->len = sizeof(struct trx_header);
+	p->flag_version = (TRX_VERSION << 16);
+
+	i = 0;
+
+	while (optind < argc) {
+		p->offsets[i++] = p->len;
+
+		if (!(in = fopen(argv[optind], "r"))) {
+			fprintf(stderr, "can not open \"%s\" for reading\n", argv[optind]);
+			usage();
+		}
+
+		n = fread(buf + p->len, 1, maxlen - p->len, in);
+		if (!feof(in)) {
+			fprintf(stderr, "fread failure or file \"%s\" too large\n",
+					argv[optind]);
+			fclose(in);
+			return EXIT_FAILURE;
+		}
+
+		fclose(in);
+
+		++optind;
+
+		if (optind < argc) {
+#undef  ROUND
+#define ROUND 4
+			if (n & (ROUND-1)) {
+				memset(buf + p->len + n, 0, ROUND - (n & (ROUND-1)));
+				n += ROUND - (n & (ROUND-1));
+			}
+		}
+
+		p->len += n;
+	}
+
+#undef  ROUND
+#define ROUND 0x1000
+	n = p->len & (ROUND-1);
+	if (n) {
+		memset(buf + p->len, 0, ROUND - n);
+		p->len += ROUND - n;
+	}
+
+	p->crc32 = crc32buf((char *) &p->flag_version,
+						p->len - offsetof(struct trx_header, flag_version));
+
+	if (!fwrite(buf, p->len, 1, out) || fflush(out)) {
+		fprintf(stderr, "fwrite failed\n");
+		return EXIT_FAILURE;
+	}
+
+	fclose(out);
+
+	return EXIT_SUCCESS;
+}
+
+/**********************************************************************/
+/* The following was grabbed and tweaked from the old snippets collection
+ * of public domain C code. */
+
+/**********************************************************************\
+|* Demonstration program to compute the 32-bit CRC used as the frame  *|
+|* check sequence in ADCCP (ANSI X3.66, also known as FIPS PUB 71     *|
+|* and FED-STD-1003, the U.S. versions of CCITT's X.25 link-level     *|
+|* protocol).  The 32-bit FCS was added via the Federal Register,     *|
+|* 1 June 1982, p.23798.  I presume but don't know for certain that   *|
+|* this polynomial is or will be included in CCITT V.41, which        *|
+|* defines the 16-bit CRC (often called CRC-CCITT) polynomial.  FIPS  *|
+|* PUB 78 says that the 32-bit FCS reduces otherwise undetected       *|
+|* errors by a factor of 10^-5 over 16-bit FCS.                       *|
+\**********************************************************************/
+
+/* Copyright (C) 1986 Gary S. Brown.  You may use this program, or
+   code or tables extracted from it, as desired without restriction.*/
+
+/* First, the polynomial itself and its table of feedback terms.  The  */
+/* polynomial is                                                       */
+/* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */
+/* Note that we take it "backwards" and put the highest-order term in  */
+/* the lowest-order bit.  The X^32 term is "implied"; the LSB is the   */
+/* X^31 term, etc.  The X^0 term (usually shown as "+1") results in    */
+/* the MSB being 1.                                                    */
+
+/* Note that the usual hardware shift register implementation, which   */
+/* is what we're using (we're merely optimizing it by doing eight-bit  */
+/* chunks at a time) shifts bits into the lowest-order term.  In our   */
+/* implementation, that means shifting towards the right.  Why do we   */
+/* do it this way?  Because the calculated CRC must be transmitted in  */
+/* order from highest-order term to lowest-order term.  UARTs transmit */
+/* characters in order from LSB to MSB.  By storing the CRC this way,  */
+/* we hand it to the UART in the order low-byte to high-byte; the UART */
+/* sends each low-bit to hight-bit; and the result is transmission bit */
+/* by bit from highest- to lowest-order term without requiring any bit */
+/* shuffling on our part.  Reception works similarly.                  */
+
+/* The feedback terms table consists of 256, 32-bit entries.  Notes:   */
+/*                                                                     */
+/*  1. The table can be generated at runtime if desired; code to do so */
+/*     is shown later.  It might not be obvious, but the feedback      */
+/*     terms simply represent the results of eight shift/xor opera-    */
+/*     tions for all combinations of data and CRC register values.     */
+/*                                                                     */
+/*  2. The CRC accumulation logic is the same for all CRC polynomials, */
+/*     be they sixteen or thirty-two bits wide.  You simply choose the */
+/*     appropriate table.  Alternatively, because the table can be     */
+/*     generated at runtime, you can start by generating the table for */
+/*     the polynomial in question and use exactly the same "updcrc",   */
+/*     if your application needn't simultaneously handle two CRC       */
+/*     polynomials.  (Note, however, that XMODEM is strange.)          */
+/*                                                                     */
+/*  3. For 16-bit CRCs, the table entries need be only 16 bits wide;   */
+/*     of course, 32-bit entries work OK if the high 16 bits are zero. */
+/*                                                                     */
+/*  4. The values must be right-shifted by eight bits by the "updcrc"  */
+/*     logic; the shift must be unsigned (bring in zeroes).  On some   */
+/*     hardware you could probably optimize the shift in assembler by  */
+/*     using byte-swap instructions.                                   */
+
+static const uint32_t crc_32_tab[] = { /* CRC polynomial 0xedb88320 */
+0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f,
+0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
+0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2,
+0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
+0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
+0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
+0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c,
+0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
+0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423,
+0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106,
+0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
+0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d,
+0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
+0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
+0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
+0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7,
+0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
+0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa,
+0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81,
+0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
+0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84,
+0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
+0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
+0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
+0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e,
+0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
+0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55,
+0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28,
+0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
+0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f,
+0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
+0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
+0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
+0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69,
+0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
+0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc,
+0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693,
+0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
+0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
+};
+
+#define UPDC32(octet,crc) (crc_32_tab[((crc) ^ (octet)) & 0xff] ^ ((crc) >> 8))
+
+uint32_t crc32buf(char *buf, size_t len)
+{
+      uint32_t crc;
+
+      crc = 0xFFFFFFFF;
+
+      for ( ; len; --len, ++buf)
+      {
+            crc = UPDC32(*buf, crc);
+      }
+
+      return crc;
+}

obsolete-buildroot/sources/target_skeleton/etc/TZ

@@ -1 +0,0 @@
-MST7MDT

obsolete-buildroot/sources/target_skeleton/etc/fstab

@@ -1,8 +0,0 @@
-# /etc/fstab: static file system information.
-#
-# <file system> <mount pt>     <type>	<options>         <dump> <pass>
-/dev/root       /              ext2	rw,noauto         0      1
-proc		/proc	       proc     defaults	  0	 0
-devpts		/dev/pts       devpts   defaults,gid=5,mode=620	  0	 0
-tmpfs           /tmp           tmpfs    defaults          0      0
-

obsolete-buildroot/sources/target_skeleton/etc/group

@@ -1,10 +0,0 @@
-root:x:0:
-daemon:x:1:
-bin:x:2:
-sys:x:3:
-adm:x:4:
-tty:x:5:
-disk:x:6:
-utmp:x:43:
-staff:x:50:
-default:x:1000:

obsolete-buildroot/sources/target_skeleton/etc/hostname

@@ -1 +0,0 @@
-uclibc

obsolete-buildroot/sources/target_skeleton/etc/hosts

@@ -1 +0,0 @@
-127.0.0.1	localhost

obsolete-buildroot/sources/target_skeleton/etc/init.d/S20urandom

@@ -1,44 +0,0 @@
-#! /bin/sh
-#
-# urandom	This script saves the random seed between reboots.
-#		It is called from the boot, halt and reboot scripts.
-#
-# Version:	@(#)urandom  1.33  22-Jun-1998  miquels@cistron.nl
-#
-
-[ -c /dev/urandom ] || exit 0
-#. /etc/default/rcS
-
-case "$1" in
-	start|"")
-		if [ "$VERBOSE" != no ]
-		then
-			echo -n "Initializing random number generator... "
-		fi
-		# Load and then save 512 bytes,
-		# which is the size of the entropy pool
-		if [ -f /etc/random-seed ]
-		then
-			cat /etc/random-seed >/dev/urandom
-		fi
-		rm -f /etc/random-seed
-		umask 077
-		dd if=/dev/urandom of=/etc/random-seed count=1 \
-			>/dev/null 2>&1 || echo "urandom start: failed."
-		umask 022
-		[ "$VERBOSE" != no ] && echo "done."
-		;;
-	stop)
-		# Carry a random seed from shut-down to start-up;
-		# see documentation in linux/drivers/char/random.c
-		[ "$VERBOSE" != no ] && echo -n "Saving random seed... "
-		umask 077
-		dd if=/dev/urandom of=/etc/random-seed count=1 \
-			>/dev/null 2>&1 || echo "urandom stop: failed."
-		[ "$VERBOSE" != no ] && echo "done."
-		;;
-	*)
-		echo "Usage: urandom {start|stop}" >&2
-		exit 1
-		;;
-esac

obsolete-buildroot/sources/target_skeleton/etc/init.d/S40network

@@ -1,35 +0,0 @@
-#!/bin/sh
-#
-# Start the network....
-#
-
-start() {
- 	echo "Starting network..."
-	/sbin/ifup -a
-}	
-stop() {
-	echo -n "Stopping network..."
-	/sbin/ifdown -a
-}
-restart() {
-	stop
-	start
-}	
-
-case "$1" in
-  start)
-  	start
-	;;
-  stop)
-  	stop
-	;;
-  restart|reload)
-  	restart
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart}"
-	exit 1
-esac
-
-exit $?
-

obsolete-buildroot/sources/target_skeleton/etc/init.d/rcS

@@ -1,27 +0,0 @@
-#!/bin/sh
-
-
-# Start all init scripts in /etc/init.d
-# executing them in numerical order.
-#
-for i in /etc/init.d/S??* ;do
-
-     # Ignore dangling symlinks (if any).
-     [ ! -f "$i" ] && continue
-
-     case "$i" in
-	*.sh)
-	    # Source shell script for speed.
-	    (
-		trap - INT QUIT TSTP
-		set start
-		. $i
-	    )
-	    ;;
-	*)
-	    # No sh extension, so fork subprocess.
-	    $i start
-	    ;;
-    esac
-done
-

obsolete-buildroot/sources/target_skeleton/etc/inittab

@@ -1,47 +0,0 @@
-# /etc/inittab
-#
-# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
-#
-# Note: BusyBox init doesn't support runlevels.  The runlevels field is
-# completely ignored by BusyBox init. If you want runlevels, use
-# sysvinit.
-#
-# Format for each entry: <id>:<runlevels>:<action>:<process>
-#
-# id        == tty to run on, or empty for /dev/console
-# runlevels == ignored
-# action    == one of sysinit, respawn, askfirst, wait, and once
-# process   == program to run
-
-# Startup the system
-null::sysinit:/bin/mount -o remount,rw /
-null::sysinit:/bin/mount -t proc proc /proc
-null::sysinit:/bin/mount -a
-null::sysinit:/bin/hostname -F /etc/hostname
-null::sysinit:/sbin/ifconfig lo 127.0.0.1 up
-null::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
-# now run any rc scripts
-::sysinit:/etc/init.d/rcS
-
-# Set up a couple of getty's
-tty1::respawn:/sbin/getty 38400 tty1
-tty2::respawn:/sbin/getty 38400 tty2
-
-# Put a getty on the serial port
-#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
-
-# Logging junk
-null::sysinit:/bin/touch /var/log/messages
-null::respawn:/sbin/syslogd -n -m 0
-null::respawn:/sbin/klogd -n
-tty3::respawn:/usr/bin/tail -f /var/log/messages
-
-# Stuff to do for the 3-finger salute
-::ctrlaltdel:/sbin/reboot
-
-# Stuff to do before rebooting
-null::shutdown:/usr/bin/killall klogd
-null::shutdown:/usr/bin/killall syslogd
-null::shutdown:/bin/umount -a -r
-null::shutdown:/sbin/swapoff -a
-

obsolete-buildroot/sources/target_skeleton/etc/inputrc

@@ -1,44 +0,0 @@
-# /etc/inputrc - global inputrc for libreadline
-# See readline(3readline) and `info readline' for more information.
-
-# Be 8 bit clean.
-set input-meta on
-set output-meta on
-set bell-style visible
-
-# To allow the use of 8bit-characters like the german umlauts, comment out
-# the line below. However this makes the meta key not work as a meta key,
-# which is annoying to those which don't need to type in 8-bit characters.
-
-# set convert-meta off
-
-"\e0d": backward-word
-"\e0c": forward-word
-"\e[h": beginning-of-line
-"\e[f": end-of-line
-"\e[1~": beginning-of-line
-"\e[4~": end-of-line
-#"\e[5~": beginning-of-history
-#"\e[6~": end-of-history
-"\e[3~": delete-char
-"\e[2~": quoted-insert
-
-# Common standard keypad and cursor
-# (codes courtsey Werner Fink, <werner@suse.de>)
-#"\e[1~": history-search-backward
-"\e[2~": yank
-"\e[3~": delete-char
-#"\e[4~": set-mark
-"\e[5~": history-search-backward
-"\e[6~": history-search-forward
-# Normal keypad and cursor of xterm
-"\e[F": end-of-line
-"\e[H": beginning-of-line
-# Application keypad and cursor of xterm
-"\eOA": previous-history
-"\eOC": forward-char
-"\eOB": next-history
-"\eOD": backward-char
-"\eOF": end-of-line
-"\eOH": beginning-of-line
-

obsolete-buildroot/sources/target_skeleton/etc/issue

@@ -1,4 +0,0 @@
-
-
-Welcome to the Erik's uClibc development environment.
-

obsolete-buildroot/sources/target_skeleton/etc/network/interfaces

@@ -1,4 +0,0 @@
-# Configure Loopback
-auto lo
-iface lo inet loopback
-

obsolete-buildroot/sources/target_skeleton/etc/passwd

@@ -1,13 +0,0 @@
-root:x:0:0:root:/root:/bin/sh
-daemon:x:1:1:daemon:/usr/sbin:/bin/sh
-bin:x:2:2:bin:/bin:/bin/sh
-sys:x:3:3:sys:/dev:/bin/sh
-sync:x:4:100:sync:/bin:/bin/sync
-mail:x:8:8:mail:/var/spool/mail:/bin/sh
-proxy:x:13:13:proxy:/bin:/bin/sh
-www-data:x:33:33:www-data:/var/www:/bin/sh
-backup:x:34:34:backup:/var/backups:/bin/sh
-operator:x:37:37:Operator:/var:/bin/sh
-sshd:x:103:99:Operator:/var:/bin/sh
-nobody:x:99:99:nobody:/home:/bin/sh
-default:x:1000:1000:Default non-root user:/home/default:/bin/sh

obsolete-buildroot/sources/target_skeleton/etc/profile

@@ -1,48 +0,0 @@
-# ~/.bashrc: executed by bash(1) for non-login interactive shells.
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-# If running interactively, then:
-if [ "$PS1" ]; then
-
-    if [ "$BASH" ]; then
-	export PS1="[\u@\h \W]\\$ "
-	alias ll='/bin/ls --color=tty -laFh'
-	alias ls='/bin/ls --color=tty -F'
-	export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
-    else
-      if [ "`id -u`" -eq 0 ]; then 
-	export PS1='# '
-      else
-	export PS1='$ '
-      fi
-    fi
-
-    export USER=`id -un`
-    export LOGNAME=$USER
-    export HOSTNAME=`/bin/hostname`
-    export HISTSIZE=1000
-    export HISTFILESIZE=1000
-    export PAGER='/bin/more '
-    export EDITOR='/bin/vi'
-    export INPUTRC=/etc/inputrc
-    export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
-
-    ### Some aliases
-    alias ps2='ps facux '
-    alias ps1='ps faxo "%U %t %p %a" '
-    alias af='ps af'
-    alias cls='clear'
-    alias df='df -h'
-    alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
-    #alias bc='bc -l'
-    alias minicom='minicom -c on'
-    alias calc='calc -Cd '
-    alias bc='calc -Cd '
-fi;

obsolete-buildroot/sources/target_skeleton/etc/protocols

@@ -1,31 +0,0 @@
-# /etc/protocols:
-# $Id$
-#
-# Internet (IP) protocols
-#
-#	from: @(#)protocols	5.1 (Berkeley) 4/17/89
-#
-# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
-
-ip	0	IP		# internet protocol, pseudo protocol number
-icmp	1	ICMP		# internet control message protocol
-igmp	2	IGMP		# Internet Group Management
-ggp	3	GGP		# gateway-gateway protocol
-ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
-st	5	ST		# ST datagram mode
-tcp	6	TCP		# transmission control protocol
-egp	8	EGP		# exterior gateway protocol
-pup	12	PUP		# PARC universal packet protocol
-udp	17	UDP		# user datagram protocol
-hmp	20	HMP		# host monitoring protocol
-xns-idp	22	XNS-IDP		# Xerox NS IDP
-rdp	27	RDP		# "reliable datagram" protocol
-iso-tp4	29	ISO-TP4		# ISO Transport Protocol class 4
-xtp	36	XTP		# Xpress Tranfer Protocol
-ddp	37	DDP		# Datagram Delivery Protocol
-idpr-cmtp	39	IDPR-CMTP	# IDPR Control Message Transport
-rspf	73	RSPF		#Radio Shortest Path First.
-vmtp	81	VMTP		# Versatile Message Transport
-ospf	89	OSPFIGP		# Open Shortest Path First IGP
-ipip	94	IPIP		# Yet Another IP encapsulation
-encap	98	ENCAP		# Yet Another IP encapsulation

obsolete-buildroot/sources/target_skeleton/etc/resolv.conf

@@ -1,2 +0,0 @@
-domain dev.null
-nameserver 127.0.0.1

obsolete-buildroot/sources/target_skeleton/etc/securetty

@@ -1,12 +0,0 @@
-tty1
-tty2
-tty3
-tty4
-tty5
-tty6
-tty7
-tty8
-ttyS0
-ttyS1
-ttyS2
-ttyS3

obsolete-buildroot/sources/target_skeleton/etc/services

@@ -1,302 +0,0 @@
-# /etc/services:
-# $Id$
-#
-# Network services, Internet style
-#
-# Note that it is presently the policy of IANA to assign a single well-known
-# port number for both TCP and UDP; hence, most entries here have two entries
-# even if the protocol doesn't support UDP operations.
-# Updated from RFC 1700, ``Assigned Numbers'' (October 1994).  Not all ports
-# are included, only the more common ones.
-
-tcpmux		1/tcp				# TCP port service multiplexer
-echo		7/tcp
-echo		7/udp
-discard		9/tcp		sink null
-discard		9/udp		sink null
-systat		11/tcp		users
-daytime		13/tcp
-daytime		13/udp
-netstat		15/tcp
-qotd		17/tcp		quote
-msp		18/tcp				# message send protocol
-msp		18/udp				# message send protocol
-chargen		19/tcp		ttytst source
-chargen		19/udp		ttytst source
-ftp-data	20/tcp
-ftp		21/tcp
-fsp		21/udp		fspd
-ssh		22/tcp				# SSH Remote Login Protocol
-ssh		22/udp				# SSH Remote Login Protocol
-telnet		23/tcp
-# 24 - private
-smtp		25/tcp		mail
-# 26 - unassigned
-time		37/tcp		timserver
-time		37/udp		timserver
-rlp		39/udp		resource	# resource location
-nameserver	42/tcp		name		# IEN 116
-whois		43/tcp		nicname
-re-mail-ck	50/tcp				# Remote Mail Checking Protocol
-re-mail-ck	50/udp				# Remote Mail Checking Protocol
-domain		53/tcp		nameserver	# name-domain server
-domain		53/udp		nameserver
-mtp		57/tcp				# deprecated
-bootps		67/tcp				# BOOTP server
-bootps		67/udp
-bootpc		68/tcp				# BOOTP client
-bootpc		68/udp
-tftp		69/udp
-gopher		70/tcp				# Internet Gopher
-gopher		70/udp
-rje		77/tcp		netrjs
-finger		79/tcp
-www		80/tcp		http		# WorldWideWeb HTTP
-www		80/udp				# HyperText Transfer Protocol
-link		87/tcp		ttylink
-kerberos	88/tcp		kerberos5 krb5	# Kerberos v5
-kerberos	88/udp		kerberos5 krb5	# Kerberos v5
-supdup		95/tcp
-# 100 - reserved
-hostnames	101/tcp		hostname	# usually from sri-nic
-iso-tsap	102/tcp		tsap		# part of ISODE.
-csnet-ns	105/tcp		cso-ns		# also used by CSO name server
-csnet-ns	105/udp		cso-ns
-# unfortunately the poppassd (Eudora) uses a port which has already
-# been assigned to a different service. We list the poppassd as an
-# alias here. This should work for programs asking for this service.
-# (due to a bug in inetd the 3com-tsmux line is disabled)
-#3com-tsmux	106/tcp		poppassd
-#3com-tsmux	106/udp		poppassd
-rtelnet		107/tcp				# Remote Telnet
-rtelnet		107/udp
-pop-2		109/tcp		postoffice	# POP version 2
-pop-2		109/udp
-pop-3		110/tcp				# POP version 3
-pop-3		110/udp
-sunrpc		111/tcp		portmapper	# RPC 4.0 portmapper TCP
-sunrpc		111/udp		portmapper	# RPC 4.0 portmapper UDP
-auth		113/tcp		authentication tap ident
-sftp		115/tcp
-uucp-path	117/tcp
-nntp		119/tcp		readnews untp	# USENET News Transfer Protocol
-ntp		123/tcp
-ntp		123/udp				# Network Time Protocol
-netbios-ns	137/tcp				# NETBIOS Name Service
-netbios-ns	137/udp
-netbios-dgm	138/tcp				# NETBIOS Datagram Service
-netbios-dgm	138/udp
-netbios-ssn	139/tcp				# NETBIOS session service
-netbios-ssn	139/udp
-imap2		143/tcp				# Interim Mail Access Proto v2
-imap2		143/udp
-snmp		161/udp				# Simple Net Mgmt Proto
-snmp-trap	162/udp		snmptrap	# Traps for SNMP
-cmip-man	163/tcp				# ISO mgmt over IP (CMOT)
-cmip-man	163/udp
-cmip-agent	164/tcp
-cmip-agent	164/udp
-xdmcp		177/tcp				# X Display Mgr. Control Proto
-xdmcp		177/udp
-nextstep	178/tcp		NeXTStep NextStep	# NeXTStep window
-nextstep	178/udp		NeXTStep NextStep	# server
-bgp		179/tcp				# Border Gateway Proto.
-bgp		179/udp
-prospero	191/tcp				# Cliff Neuman's Prospero
-prospero	191/udp
-irc		194/tcp				# Internet Relay Chat
-irc		194/udp
-smux		199/tcp				# SNMP Unix Multiplexer
-smux		199/udp
-at-rtmp		201/tcp				# AppleTalk routing
-at-rtmp		201/udp
-at-nbp		202/tcp				# AppleTalk name binding
-at-nbp		202/udp
-at-echo		204/tcp				# AppleTalk echo
-at-echo		204/udp
-at-zis		206/tcp				# AppleTalk zone information
-at-zis		206/udp
-qmtp		209/tcp				# The Quick Mail Transfer Protocol
-qmtp		209/udp				# The Quick Mail Transfer Protocol
-z3950		210/tcp		wais		# NISO Z39.50 database
-z3950		210/udp		wais
-ipx		213/tcp				# IPX
-ipx		213/udp
-imap3		220/tcp				# Interactive Mail Access
-imap3		220/udp				# Protocol v3
-ulistserv	372/tcp				# UNIX Listserv
-ulistserv	372/udp
-https		443/tcp				# MCom
-https		443/udp				# MCom
-snpp		444/tcp				# Simple Network Paging Protocol
-snpp		444/udp				# Simple Network Paging Protocol
-saft		487/tcp				# Simple Asynchronous File Transfer
-saft		487/udp				# Simple Asynchronous File Transfer
-npmp-local	610/tcp		dqs313_qmaster	# npmp-local / DQS
-npmp-local	610/udp		dqs313_qmaster	# npmp-local / DQS
-npmp-gui	611/tcp		dqs313_execd	# npmp-gui / DQS
-npmp-gui	611/udp		dqs313_execd	# npmp-gui / DQS
-hmmp-ind	612/tcp		dqs313_intercell# HMMP Indication / DQS
-hmmp-ind	612/udp		dqs313_intercell# HMMP Indication / DQS
-#
-# UNIX specific services
-#
-exec		512/tcp
-biff		512/udp		comsat
-login		513/tcp
-who		513/udp		whod
-shell		514/tcp		cmd		# no passwords used
-syslog		514/udp
-printer		515/tcp		spooler		# line printer spooler
-talk		517/udp
-ntalk		518/udp
-route		520/udp		router routed	# RIP
-timed		525/udp		timeserver
-tempo		526/tcp		newdate
-courier		530/tcp		rpc
-conference	531/tcp		chat
-netnews		532/tcp		readnews
-netwall		533/udp				# -for emergency broadcasts
-uucp		540/tcp		uucpd		# uucp daemon
-afpovertcp	548/tcp				# AFP over TCP
-afpovertcp	548/udp				# AFP over TCP
-remotefs	556/tcp		rfs_server rfs	# Brunhoff remote filesystem
-klogin		543/tcp				# Kerberized `rlogin' (v5)
-kshell		544/tcp		krcmd		# Kerberized `rsh' (v5)
-kerberos-adm	749/tcp				# Kerberos `kadmin' (v5)
-#
-webster		765/tcp				# Network dictionary
-webster		765/udp
-#
-# From ``Assigned Numbers'':
-#
-#> The Registered Ports are not controlled by the IANA and on most systems
-#> can be used by ordinary user processes or programs executed by ordinary
-#> users.
-#
-#> Ports are used in the TCP [45,106] to name the ends of logical
-#> connections which carry long term conversations.  For the purpose of
-#> providing services to unknown callers, a service contact port is
-#> defined.  This list specifies the port used by the server process as its
-#> contact port.  While the IANA can not control uses of these ports it
-#> does register or list uses of these ports as a convienence to the
-#> community.
-#
-nfsdstatus	1110/tcp
-nfsd-keepalive	1110/udp
-
-ingreslock	1524/tcp
-ingreslock	1524/udp
-prospero-np	1525/tcp			# Prospero non-privileged
-prospero-np	1525/udp
-datametrics	1645/tcp	old-radius	# datametrics / old radius entry
-datametrics	1645/udp	old-radius	# datametrics / old radius entry
-sa-msg-port	1646/tcp	old-radacct	# sa-msg-port / old radacct entry
-sa-msg-port	1646/udp	old-radacct	# sa-msg-port / old radacct entry
-radius		1812/tcp			# Radius
-radius		1812/udp			# Radius
-radacct		1813/tcp			# Radius Accounting
-radacct		1813/udp			# Radius Accounting
-nfsd		2049/tcp	nfs
-nfsd		2049/udp	nfs
-cvspserver	2401/tcp			# CVS client/server operations
-cvspserver	2401/udp			# CVS client/server operations
-mysql		3306/tcp			# MySQL
-mysql		3306/udp			# MySQL
-rfe		5002/tcp			# Radio Free Ethernet
-rfe		5002/udp			# Actually uses UDP only
-cfengine	5308/tcp			# CFengine
-cfengine	5308/udp			# CFengine
-bbs		7000/tcp			# BBS service
-#
-#
-# Kerberos (Project Athena/MIT) services
-# Note that these are for Kerberos v4, and are unofficial.  Sites running
-# v4 should uncomment these and comment out the v5 entries above.
-#
-kerberos4	750/udp		kerberos-iv kdc	# Kerberos (server) udp
-kerberos4	750/tcp		kerberos-iv kdc	# Kerberos (server) tcp
-kerberos_master	751/udp				# Kerberos authentication
-kerberos_master	751/tcp				# Kerberos authentication
-passwd_server	752/udp				# Kerberos passwd server
-krb_prop	754/tcp				# Kerberos slave propagation
-krbupdate	760/tcp		kreg		# Kerberos registration
-kpasswd		761/tcp		kpwd		# Kerberos "passwd"
-kpop		1109/tcp			# Pop with Kerberos
-knetd		2053/tcp			# Kerberos de-multiplexor
-zephyr-srv	2102/udp			# Zephyr server
-zephyr-clt	2103/udp			# Zephyr serv-hm connection
-zephyr-hm	2104/udp			# Zephyr hostmanager
-eklogin		2105/tcp			# Kerberos encrypted rlogin
-#
-# Unofficial but necessary (for NetBSD) services
-#
-supfilesrv	871/tcp				# SUP server
-supfiledbg	1127/tcp			# SUP debugging
-#
-# Datagram Delivery Protocol services
-#
-rtmp		1/ddp				# Routing Table Maintenance Protocol
-nbp		2/ddp				# Name Binding Protocol
-echo		4/ddp				# AppleTalk Echo Protocol
-zip		6/ddp				# Zone Information Protocol
-#
-# Services added for the Debian GNU/Linux distribution
-poppassd	106/tcp				# Eudora
-poppassd	106/udp				# Eudora
-mailq		174/tcp				# Mailer transport queue for Zmailer
-mailq		174/tcp				# Mailer transport queue for Zmailer
-omirr		808/tcp		omirrd		# online mirror
-omirr		808/udp		omirrd		# online mirror
-rmtcfg		1236/tcp			# Gracilis Packeten remote config server
-xtel		1313/tcp			# french minitel
-coda_opcons	1355/udp			# Coda opcons            (Coda fs)
-coda_venus	1363/udp			# Coda venus             (Coda fs)
-coda_auth	1357/udp			# Coda auth              (Coda fs)
-coda_udpsrv	1359/udp			# Coda udpsrv            (Coda fs)
-coda_filesrv	1361/udp			# Coda filesrv           (Coda fs)
-codacon		1423/tcp	venus.cmu	# Coda Console           (Coda fs)
-coda_aux1	1431/tcp			# coda auxiliary service (Coda fs)
-coda_aux1	1431/udp			# coda auxiliary service (Coda fs)
-coda_aux2	1433/tcp			# coda auxiliary service (Coda fs)
-coda_aux2	1433/udp			# coda auxiliary service (Coda fs)
-coda_aux3	1435/tcp			# coda auxiliary service (Coda fs)
-coda_aux3	1435/udp			# coda auxiliary service (Coda fs)
-cfinger		2003/tcp			# GNU Finger
-afbackup	2988/tcp			# Afbackup system
-afbackup	2988/udp			# Afbackup system
-icp		3130/tcp			# Internet Cache Protocol (Squid)
-icp		3130/udp			# Internet Cache Protocol (Squid)
-postgres	5432/tcp			# POSTGRES
-postgres	5432/udp			# POSTGRES
-fax		4557/tcp			# FAX transmission service        (old)
-hylafax		4559/tcp			# HylaFAX client-server protocol  (new)
-noclog		5354/tcp			# noclogd with TCP (nocol)
-noclog		5354/udp			# noclogd with UDP (nocol)
-hostmon		5355/tcp			# hostmon uses TCP (nocol)
-hostmon		5355/udp			# hostmon uses TCP (nocol)
-ircd		6667/tcp			# Internet Relay Chat
-ircd		6667/udp			# Internet Relay Chat
-webcache	8080/tcp			# WWW caching service
-webcache	8080/udp			# WWW caching service
-tproxy		8081/tcp			# Transparent Proxy
-tproxy		8081/udp			# Transparent Proxy
-mandelspawn	9359/udp	mandelbrot	# network mandelbrot
-amanda		10080/udp			# amanda backup services
-amandaidx	10082/tcp			# amanda backup services
-amidxtape	10083/tcp			# amanda backup services
-isdnlog		20011/tcp			# isdn logging system
-isdnlog		20011/udp			# isdn logging system
-vboxd		20012/tcp			# voice box system
-vboxd		20012/udp			# voice box system
-binkp           24554/tcp			# Binkley
-binkp           24554/udp			# Binkley
-asp		27374/tcp			# Address Search Protocol
-asp		27374/udp			# Address Search Protocol
-tfido           60177/tcp			# Ifmail
-tfido           60177/udp			# Ifmail
-fido            60179/tcp			# Ifmail
-fido            60179/udp			# Ifmail
-
-# Local services
-

obsolete-buildroot/sources/target_skeleton/etc/shadow

@@ -1,12 +0,0 @@
-root::10933:0:99999:7:::
-bin:*:10933:0:99999:7:::
-daemon:*:10933:0:99999:7:::
-adm:*:10933:0:99999:7:::
-lp:*:10933:0:99999:7:::
-sync:*:10933:0:99999:7:::
-shutdown:*:10933:0:99999:7:::
-halt:*:10933:0:99999:7:::
-uucp:*:10933:0:99999:7:::
-operator:*:10933:0:99999:7:::
-nobody:*:10933:0:99999:7:::
-default::10933:0:99999:7:::

obsolete-buildroot/sources/target_skeleton/root/.bash_logout

@@ -1,7 +0,0 @@
-# ~/.bash_logout: executed by bash(1) when login shell exits.
-
-# when leaving the console clear the screen to increase privacy
-
-case "`tty`" in
-    /dev/tty[0-9]*) clear
-esac

obsolete-buildroot/sources/target_skeleton/root/.bash_profile

@@ -1,15 +0,0 @@
-# .bash_profile
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-umask 022
-
-if [ -f ~/.bashrc ]; then
-    source ~/.bashrc
-fi

obsolete-buildroot/sources/target_skeleton/root/.bashrc

@@ -1,48 +0,0 @@
-# ~/.bashrc: executed by bash(1) for non-login interactive shells.
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-# If running interactively, then:
-if [ "$PS1" ]; then
-
-    if [ "$BASH" ]; then
-	export PS1="[\u@\h \W]\\$ "
-    else
-      if [ "`id -u`" -eq 0 ]; then 
-	export PS1='# '
-      else
-	export PS1='$ '
-      fi
-    fi
-
-    export USER=`id -un`
-    export LOGNAME=$USER
-    export HOSTNAME=`/bin/hostname`
-    export HISTSIZE=1000
-    export HISTFILESIZE=1000
-    export PAGER='/bin/more '
-    export EDITOR='/bin/vi'
-    export INPUTRC=/etc/inputrc
-    export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
-    export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
-
-    ### Some aliases
-    alias ps2='ps facux '
-    alias ps1='ps faxo "%U %t %p %a" '
-    alias af='ps af'
-    alias cls='clear'
-    alias ll='/bin/ls --color=tty -laFh'
-    alias ls='/bin/ls --color=tty -F'
-    alias df='df -h'
-    alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
-    #alias bc='bc -l'
-    alias minicom='minicom -c on'
-    alias calc='calc -Cd '
-    alias bc='calc -Cd '
-fi;