1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 05:11:46 +02:00

broadcom-diag: add support for some new devices

There is still no Ethernet driver for these devices in trunk.

Thanks George Kashperko for the patch.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29735 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
hauke 2012-01-13 20:21:15 +00:00
parent 01cb3619d3
commit 288c968dab

View File

@ -59,6 +59,8 @@ enum {
WRT600N,
WRT600NV11,
WRT610N,
WRT610NV2,
E3000V1,
/* ASUS */
WLHDD,
@ -74,6 +76,7 @@ enum {
WL520GU,
ASUS_4702,
WL700GE,
RTN16,
/* Buffalo */
WBR2_G54,
@ -107,6 +110,7 @@ enum {
/* Belkin */
BELKIN_UNKNOWN,
BELKIN_F7D4301,
/* Netgear */
WGT634U,
@ -364,6 +368,34 @@ static struct platform_t __initdata platforms[] = {
{ .name = "ses_blue", .gpio = 1 << 9, .polarity = REVERSE }, // WiFi protected setup LED blue
},
},
[WRT610NV2] = {
.name = "Linksys WRT610N V2",
.buttons = {
{ .name = "reset", .gpio = 1 << 6 },
{ .name = "ses", .gpio = 1 << 4 },
},
.leds = {
{ .name = "power", .gpio = 1 << 5, .polarity = NORMAL }, // Power LED
{ .name = "usb", .gpio = 1 << 7, .polarity = NORMAL }, // USB LED
{ .name = "ses_amber", .gpio = 1 << 0, .polarity = REVERSE }, // WiFi protected setup LED amber
{ .name = "ses_blue", .gpio = 1 << 3, .polarity = REVERSE }, // WiFi protected setup LED blue
{ .name = "wlan", .gpio = 1 << 1, .polarity = NORMAL }, // Wireless LED
},
},
[E3000V1] = {
.name = "Linksys E3000 V1",
.buttons = {
{ .name = "reset", .gpio = 1 << 6 },
{ .name = "ses", .gpio = 1 << 4 },
},
.leds = {
{ .name = "power", .gpio = 1 << 5, .polarity = NORMAL }, // Power LED
{ .name = "usb", .gpio = 1 << 7, .polarity = NORMAL }, // USB LED
{ .name = "ses_amber", .gpio = 1 << 0, .polarity = REVERSE }, // WiFi protected setup LED amber
{ .name = "ses_blue", .gpio = 1 << 3, .polarity = REVERSE }, // WiFi protected setup LED blue
{ .name = "wlan", .gpio = 1 << 1, .polarity = NORMAL }, // Wireless LED
},
},
/* Asus */
[WLHDD] = {
.name = "ASUS WL-HDD",
@ -503,6 +535,17 @@ static struct platform_t __initdata platforms[] = {
},
.platform_init = bcm4780_init,
},
[RTN16] = {
.name = "ASUS RT-N16",
.buttons = {
{ .name = "reset", .gpio = 1 << 8 },
{ .name = "ses", .gpio = 1 << 5 },
},
.leds = {
{ .name = "power", .gpio = 1 << 1, .polarity = REVERSE },
{ .name = "wlan", .gpio = 1 << 7, .polarity = NORMAL },
},
},
/* Buffalo */
[WHR_G54S] = {
.name = "Buffalo WHR-G54S",
@ -749,6 +792,19 @@ static struct platform_t __initdata platforms[] = {
{ .name = "connected", .gpio = 1 << 0, .polarity = NORMAL },
},
},
[BELKIN_F7D4301] = {
.name = "Belkin PlayMax F7D4301",
.buttons = {
{ .name = "reset", .gpio = 1 << 6 },
{ .name = "wps", .gpio = 1 << 8 },
},
.leds = {
{ .name = "power", .gpio = 1 << 11, .polarity = REVERSE },
{ .name = "wlan", .gpio = 1 << 13, .polarity = REVERSE },
{ .name = "led0", .gpio = 1 << 14, .polarity = REVERSE },
{ .name = "led1", .gpio = 1 << 15, .polarity = REVERSE },
},
},
/* Netgear */
[WGT634U] = {
.name = "Netgear WGT634U",
@ -962,6 +1018,10 @@ static struct platform_t __init *platform_detect(void)
return &platforms[WL520GU];
if (startswith(buf,"WL330GE-")) /* WL330GE-* */
return &platforms[WL330GE];
if (startswith(buf,"RT-N16-")) /* RT-N16-* */
return &platforms[RTN16];
if (startswith(buf,"F7D4301")) /* F7D4301* */
return &platforms[BELKIN_F7D4301];
}
/* Based on "ModelId" */
@ -1011,6 +1071,19 @@ static struct platform_t __init *platform_detect(void)
return &platforms[WRT600N];
}
/*
* Normally, these would go inside the "CFE based - newer hardware" block below; however, during early init, the
* "pmon_ver" variable is not available on the E3000v1 (and probably the WRT610Nv2 also). Until this is figured out,
* these will need to remain here in order for platform detection to work.
*/
if (!strcmp(boardnum, "42")) { /* Linksys */
if (!strcmp(boardtype, "0x04cf") && !strcmp(getvar("boot_hw_model"), "E300") && !strcmp(getvar("boot_hw_ver"), "1.0"))
return &platforms[E3000V1];
if (!strcmp(boardtype, "0x04cf") && !strcmp(getvar("boot_hw_model"), "WRT610N") && !strcmp(getvar("boot_hw_ver"), "2.0"))
return &platforms[WRT610NV2];
}
if (startswith(getvar("pmon_ver"), "CFE")) {
/* CFE based - newer hardware */
if (!strcmp(boardnum, "42")) { /* Linksys */