remove ethernet bonding updates

git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@3545 3c298f89-4303-0410-b956-a3cf2f4a3e73
2024-11-24 05:48:05 +02:00 · 2006-03-29 12:35:35 +00:00 · 2006-03-29 12:35:35 +00:00 · 2e6c477190
commit 2e6c477190
parent fee25cd0ec
1 changed files with 111 additions and 46 deletions
--- a/target/linux/brcm-2.6/patches/005-bcm43xx-dscape-060328.patch
+++ b/target/linux/brcm-2.6/patches/005-bcm43xx-dscape-060328.patch
@ -1,3 +1,109 @@
+diff -Nur linux-2.6.16/Documentation/networking/bcm43xx-d80211-HOWTO.txt linux-2.6.16-bcm43xx/Documentation/networking/bcm43xx-d80211-HOWTO.txt
+--- linux-2.6.16/Documentation/networking/bcm43xx-d80211-HOWTO.txt	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.16-bcm43xx/Documentation/networking/bcm43xx-d80211-HOWTO.txt	2006-03-28 22:16:14.000000000 +0200
+@@ -0,0 +1,67 @@
+****                                    ****
+****  HOWTO get bcm43xx-dscape running  ****
+****                                    ****
+
+This is a port of the bcm43xx driver for the devicescape ieee802.11
+stack. The devicescape ieee802.11 stack is an advanced out-of-mainline
+802.11 protocol module.
+I will call the "devicescape ieee802.11 stack" simply "dscape" in the
+following text.
+
+
+*** Setting up the bcm43xx driver with dscape is currently non-trivial,
+*** as several modifications to the kernel and the userland
+*** wpa_supplicant tool are required. We are working on it...
+
+
+1)  You need to patch the kernel with the ieee80211-devicescape stack
+    and the bcm43xx-dscape port.
+    Both are available in one cummulative at:
+    ftp://ftp.bu3sch.de/bcm43xx-snapshots/all-in-one/bcm43xx-dscape/
+    Read the instructions on http://bcm43xx.berlios.de/ for how to apply
+    this patch.
+
+    Patch the kernel, compile and install it.
+    When configuring, enable
+    "Networking/Generic IEEE 802.11 Networking Stack (dscape)"
+    and
+    "Device Drivers/Network device support/Wireless LAN (non-hamradio)/Broadcom BCM43xx wireless support (DeviceScape stack)"
+    Reboot.
+
+2)  Set up a wpa_supplicant config file in /etc/wpa_supplicant.conf
+    Here is an example for an AES WPA encrypted network:
+
+	# WPA AES encryption
+	ctrl_interface=/var/run/wpa_supplicant
+	network={
+		ssid="ACCESSPOINT_SSID"
+		key_mgmt=WPA-PSK
+		proto=WPA
+		pairwise=CCMP TKIP
+		group=CCMP TKIP
+		psk="MY PASSPHRASE"
+		priority=3
+	}
+
+3)  Take a bottle of your favourite beer, open it and take a swallow.
+
+4)  Now it's time to bring the driver up.
+    Do modprobe bcm43xx-d80211 to load the driver.
+    There is an ugly bash script to bring the driver up after insmod.
+    It is found in the "scripts" subdirectory of the patched kernel
+    tree and is called "bcm43xx-d80211-sta_up.sh".
+    Call scripts/bcm43xx-d80211-sta_up.sh --help to get some usage information.
+    It may suffice to call scripts/bcm43xx-d80211-sta_up.sh without any parameters. See
+    the help. Default parameters, which are used when called without parameters,
+    are explained there.
+
+5)  If you want to access the internet, make sure your default route
+    is correctly set up with your gateway's IP:
+    route add default gw 192.168.xxx.xxx
+
+6)  Take another swallow from your bottle of beer and test if it works:
+    ping www.kernel.org
+
+7)  If it works, drink the rest of your beer. Otherwise read this HOWTO again,
+    and again and again. Complain to bcm43xx-dev@lists.berlios.de, if it still
+    does not work.
+diff -Nur linux-2.6.16/Documentation/networking/bcm43xx-d80211.txt linux-2.6.16-bcm43xx/Documentation/networking/bcm43xx-d80211.txt
+--- linux-2.6.16/Documentation/networking/bcm43xx-d80211.txt	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.16-bcm43xx/Documentation/networking/bcm43xx-d80211.txt	2006-03-28 22:16:14.000000000 +0200
+@@ -0,0 +1,31 @@
+
+			BCM43xx Linux Driver Project
+			============================
+
+About this software
+-------------------
+
+The goal of this project is to develop a linux driver for Broadcom
+BCM43xx chips, based on the specification at 
+http://bcm-specs.sipsolutions.net/
+
+The project page is http://bcm43xx.berlios.de/
+
+This is a port of the bcm43xx driver for the devicescape ieee802.11
+stack.  
+
+Requirements
+------------
+
+1)	Linux Kernel 2.6.16 or later
+	http://www.kernel.org/
+
+	See Documentation/networking/bcm43xx-d80211-HOWTO.txt for further 
+	instructions. 
+
+2)	Firmware Files
+
+	Please try bcm43xx-fwcutter. It can extract the firmware from various 
+	binary driver files and supports driver files from Windows, MacOS and 
+	Linux. You can get bcm43xx-fwcutter from http://bcm43xx.berlios.de/.
+	Also, bcm43xx-fwcutter comes with a README file for further instructions.
 diff -Nur linux-2.6.16/drivers/net/wireless/bcm43xx-d80211/bcm43xx_debugfs.c linux-2.6.16-bcm43xx/drivers/net/wireless/bcm43xx-d80211/bcm43xx_debugfs.c
 --- linux-2.6.16/drivers/net/wireless/bcm43xx-d80211/bcm43xx_debugfs.c	1970-01-01 01:00:00.000000000 +0100
 +++ linux-2.6.16-bcm43xx/drivers/net/wireless/bcm43xx-d80211/bcm43xx_debugfs.c	2006-03-28 22:16:14.000000000 +0200
@ -16609,61 +16715,20 @@ diff -Nur linux-2.6.16/include/net/sock.h linux-2.6.16-bcm43xx/include/net/sock.
 
 diff -Nur linux-2.6.16/net/core/dev.c linux-2.6.16-bcm43xx/net/core/dev.c
 --- linux-2.6.16/net/core/dev.c	2006-03-20 06:53:29.000000000 +0100
-+++ linux-2.6.16-bcm43xx/net/core/dev.c	2006-03-28 22:16:14.000000000 +0200
+++ linux-2.6.16-bcm43xx/net/core/dev.c	2006-03-29 14:12:58.000000000 +0200
@@ -110,10 +110,8 @@
 #include <linux/netpoll.h>
 #include <linux/rcupdate.h>
 #include <linux/delay.h>
 -#ifdef CONFIG_NET_RADIO
 -#include <linux/wireless.h>		/* Note : will define WIRELESS_EXT */
-+#include <linux/wireless.h>
+#include <linux/wireless.h>		/* Note : will define CONFIG_WIRELESS_EXT */
 #include <net/iw_handler.h>
 -#endif	/* CONFIG_NET_RADIO */
 #include <asm/current.h>
 
 /*
-@@ -1448,8 +1446,29 @@
- {
- 	struct net_device *dev = skb->dev;
- 
-	if (dev->master)
-+	if (dev->master) {
-+		/*
-+		 * On bonding slaves other than the currently active
-+		 * slave, suppress duplicates except for 802.3ad
-+		 * ETH_P_SLOW and alb non-mcast/bcast.
-+		 */
-+		if (dev->priv_flags & IFF_SLAVE_INACTIVE) {
-+			if (dev->master->priv_flags & IFF_MASTER_ALB) {
-+				if (skb->pkt_type != PACKET_BROADCAST &&
-+				    skb->pkt_type != PACKET_MULTICAST)
-+					goto keep;
-+			}
-+
-+			if (dev->master->priv_flags & IFF_MASTER_8023AD &&
-+			    skb->protocol == __constant_htons(ETH_P_SLOW))
-+				goto keep;
-+		
-+			kfree_skb(skb);
-+			return NULL;
-+		}
-+keep:
- 		skb->dev = dev->master;
-+	}
- 
- 	return dev;
- }
-@@ -1593,6 +1612,9 @@
- 
- 	orig_dev = skb_bond(skb);
- 
-+	if (!orig_dev)
-+		return NET_RX_DROP;
-+
- 	__get_cpu_var(netdev_rx_stat).total++;
- 
- 	skb->h.raw = skb->nh.raw = skb->data;
-@@ -2028,7 +2050,7 @@
+@@ -2028,7 +2026,7 @@
 	.release = seq_release,
 };
 
@ -16672,7 +16737,7 @@ diff -Nur linux-2.6.16/net/core/dev.c linux-2.6.16-bcm43xx/net/core/dev.c
 extern int wireless_proc_init(void);
 #else
 #define wireless_proc_init() 0
-@@ -2582,7 +2604,7 @@
+@@ -2582,7 +2580,7 @@
 					ret = -EFAULT;
 				return ret;
 			}
@ -16681,7 +16746,7 @@ diff -Nur linux-2.6.16/net/core/dev.c linux-2.6.16-bcm43xx/net/core/dev.c
 			/* Take care of Wireless Extensions */
 			if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) {
 				/* If command is `set a parameter', or
-@@ -2603,7 +2625,7 @@
+@@ -2603,7 +2601,7 @@
 					ret = -EFAULT;
 				return ret;
 			}