1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 05:11:46 +02:00

add documentation fixes from #1285

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6319 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
nbd 2007-02-18 16:46:46 +00:00
parent a7cb17cea9
commit 324d6bc6aa
2 changed files with 10 additions and 10 deletions

View File

@ -121,15 +121,15 @@ Scroll over the firmware to find printable words that can be significant.
\subsubsection{Amount of flash memory}
Linux can hardly fit in a 2MB flash device, once you have open the device and
located the flash chip, try to find other the Internet its characteristics. If
Linux can hardly fit in a 2MB flash device, once you have opened the device and
located the flash chip, try to find its characteristics on the Internet. If
your flash chip is a 2MB or less device, your device is most likely to run a
proprietary OS such as WindRiver VxWorks, or a custom manufacturer OS like Zyxel ZynOS.
OpenWrt does not currently run on devices which have equal or less than 2MB of
flash memory. This limitation will probably not be worked around since those
devices are most of the time micro routers, or Wireless Access Points, which are
not the main OpenWrt target.
OpenWrt does not currently run on devices which have 2MB or less of flash memory.
This limitation will probably not be worked around since those devices are most
of the time micro-routers, or Wireless Access Points, which are not the main
OpenWrt target.
\subsubsection{Pluging a serial port}
@ -140,8 +140,8 @@ easily notice if the device uses a Linux kenrel or something different.
\subsection{Finding and using the manufacturer SDK}
Once you are sure your device run a Linux based firmware, you will be able to start
hacking on it. If the manufacturer respect the GPL, it will have release with the
device, a Sample Development Kit.
hacking on it. If the manufacturer respected the GPL, it will have released a Sample
Development Kit with the device.
\subsubsection{GPL violations}

View File

@ -24,8 +24,8 @@ This is done by the wrapper script \texttt{/etc/rc.common}.
script should provide. \texttt{start()} is called when the user runs \texttt{/etc/init.d/httpd start}
or (if the script is enabled and does not override this behavior) at system boot time.
Enabling and disabling init scripts is done by running \texttt{/etc/init.d/\textit{name} start}
or \texttt{/etc/init.d/\textit{name} stop}. This creates or removes symbolic links to the
Enabling and disabling init scripts is done by running \texttt{/etc/init.d/\textit{name} enable}
or \texttt{/etc/init.d/\textit{name} disable}. This creates or removes symbolic links to the
init script in \texttt{/etc/rc.d}, which is processed by \texttt{/etc/init.d/rcS} at boot time.
The order in which these scripts are run is defined in the variable \texttt{START} in the init