1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 03:01:09 +02:00

[ar71xx] nuke 2.6.25 specific patches

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12625 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg 2008-09-18 12:40:42 +00:00
parent 2fba571951
commit 3bb46aedde
12 changed files with 0 additions and 506 deletions

View File

@ -1,61 +0,0 @@
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -593,6 +593,13 @@
cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx
load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
+#
+# Atheros AR71xx
+#
+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/
+cflags-$(CONFIG_ATHEROS_AR71XX) += -Iinclude/asm-mips/mach-ar71xx
+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000
+
# temporary until string.h is fixed
cflags-y += -ffreestanding
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -79,6 +79,15 @@
#define MACH_LASAT_200 1 /* Masquerade PRO/SP200 */
/*
+ * Valid machtype for Atheros AR71xx based boards
+ */
+#define MACH_AR71XX_GENERIC 0
+#define MACH_AR71XX_WP543 1 /* Compex WP543 */
+#define MACH_AR71XX_RB_411 2 /* MikroTik RouterBOARD 411 */
+#define MACH_AR71XX_RB_433 3 /* MikroTik RouterBOARD 433/433AH */
+#define MACH_AR71XX_RB_450 4 /* MikroTik RouterBOARD 450 */
+
+/*
* Valid machtype for group NEC EMMA2RH
*/
#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -21,6 +21,24 @@
config MACH_ALCHEMY
bool "Alchemy processor based machines"
+config ATHEROS_AR71XX
+ bool "Atheros AR71xx based boards"
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select GENERIC_GPIO
+ select HAVE_GPIO_LIB
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
+ select MIPS_MACHINE
+ help
+ Support for Atheros AR71xx based boards.
+
config BASLER_EXCITE
bool "Basler eXcite smart camera"
select CEVT_R4K

View File

@ -1,10 +0,0 @@
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -15,6 +15,7 @@
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o
#
# These are still pretty much in the old state, watch, go blind.

View File

@ -1,60 +0,0 @@
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -260,3 +260,15 @@
To compile this driver as a module, choose M here: the
module will be called r8a66597-hcd.
+config USB_OHCI_AR71XX
+ bool "USB OHCI support for Atheros AR71xx"
+ depends on ATHEROS_AR71XX && USB_OHCI_HCD
+ help
+ Support for Atheros AR71xx built-in OHCI controller
+
+config USB_EHCI_AR71XX
+ bool "USB EHCI support for AR71xx"
+ depends on ATHEROS_AR71XX && USB_EHCI_HCD
+ help
+ Support for Atheros AR71xx built-in EHCI controller
+
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1043,6 +1043,11 @@
#define PLATFORM_DRIVER ixp4xx_ehci_driver
#endif
+#ifdef CONFIG_USB_EHCI_AR71XX
+#include "ehci-ar71xx.c"
+#define PLATFORM_DRIVER ehci_hcd_ar71xx_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
#error "missing bus glue for ehci-hcd"
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -538,6 +538,11 @@
#define writel_be(val, addr) out_be32((__force unsigned *)addr, val)
#endif
+#if defined(CONFIG_ATHEROS_AR71XX)
+#define readl_be(addr) __raw_readl(addr)
+#define writel_be(val, addr) __raw_writel(addr, val)
+#endif
+
static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci,
__hc32 __iomem * regs)
{
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1057,6 +1057,11 @@
#define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
#endif
+#ifdef CONFIG_USB_OHCI_AR71XX
+#include "ohci-ar71xx.c"
+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver
+#endif
+
#if !defined(PCI_DRIVER) && \
!defined(PLATFORM_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \

View File

@ -1,26 +0,0 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -52,6 +52,13 @@
comment "SPI Master Controller Drivers"
depends on SPI_MASTER
+config SPI_AR71XX
+ tristate "Atheros AR71xx SPI Controller"
+ depends on SPI_MASTER && ATHEROS_AR71XX
+ select SPI_BITBANG
+ help
+ This is the SPI contoller driver for Atheros AR71xx.
+
config SPI_ATMEL
tristate "Atmel SPI Controller"
depends on (ARCH_AT91 || AVR32) && SPI_MASTER
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -11,6 +11,7 @@
obj-$(CONFIG_SPI_MASTER) += spi.o
# SPI master controller drivers (bus)
+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o

View File

@ -1,21 +0,0 @@
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2067,6 +2067,8 @@
The safe and default value for this is N.
+source drivers/net/ag71xx/Kconfig
+
config DL2K
tristate "DL2000/TC902x-based Gigabit Ethernet support"
depends on PCI
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -2,6 +2,7 @@
# Makefile for the Linux network (ethercard) device drivers.
#
+obj-$(CONFIG_AG71XX) += ag71xx/
obj-$(CONFIG_E1000) += e1000/
obj-$(CONFIG_E1000E) += e1000e/
obj-$(CONFIG_IBM_EMAC) += ibm_emac/

View File

@ -1,13 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -441,6 +441,10 @@
{ "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
{ "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },
+ /* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ { "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
+ { "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
+
/* Spansion -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
*/

View File

@ -1,23 +0,0 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -76,6 +76,11 @@
---help---
Currently supports the Marvell 88E6060 switch.
+config MICREL_PHY
+ tristate "Drivers for Micrel/Kendin PHYs"
+ ---help---
+ Currently has a driver for the KSZ8041
+
config FIXED_PHY
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -15,5 +15,6 @@
obj-$(CONFIG_ADM6996_PHY) += adm6996.o
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o

View File

@ -1,54 +0,0 @@
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -59,31 +59,32 @@
static char nullstring[] = "unallocated";
#endif
+ buf = vmalloc(master->erasesize);
+ if (!buf)
+ return -ENOMEM;
+
+ restart:
if ( directory < 0 ) {
offset = master->size + directory * master->erasesize;
- while (master->block_isbad &&
+ while (master->block_isbad &&
master->block_isbad(master, offset)) {
if (!offset) {
nogood:
printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
+ vfree(buf);
return -EIO;
}
offset -= master->erasesize;
}
} else {
offset = directory * master->erasesize;
- while (master->block_isbad &&
+ while (master->block_isbad &&
master->block_isbad(master, offset)) {
offset += master->erasesize;
if (offset == master->size)
goto nogood;
}
}
- buf = vmalloc(master->erasesize);
-
- if (!buf)
- return -ENOMEM;
-
printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
master->name, offset);
@@ -155,6 +156,11 @@
}
if (i == numslots) {
/* Didn't find it */
+ if (offset + master->erasesize < master->size) {
+ /* not at the end of the flash yet, maybe next block :) */
+ directory++;
+ goto restart;
+ }
printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
master->name);
ret = 0;

View File

@ -1,21 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -330,4 +330,8 @@
Enabling this option will enable you to use this to control
external NAND devices.
+config MTD_NAND_RB4XX
+ tristate "NAND flash driver for RouterBoard 4xx series"
+ depends on MTD_NAND && ATHEROS_AR71XX
+
endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -28,6 +28,7 @@
obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o

View File

@ -1,143 +0,0 @@
--- /dev/null
+++ b/include/asm-mips/mips_machine.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_MIPS_MACHINE_H
+#define __ASM_MIPS_MACHINE_H
+
+#include <linux/init.h>
+#include <linux/list.h>
+
+#include <asm/bootinfo.h>
+
+#define MIPS_MACHINE_NAME_LEN 64
+
+struct mips_machine {
+ unsigned long mach_type;
+ void (*mach_setup)(void);
+ unsigned char mach_name[MIPS_MACHINE_NAME_LEN];
+ struct list_head list;
+};
+
+void mips_machine_register(struct mips_machine *) __init;
+void mips_machine_setup(void) __init;
+
+extern unsigned char mips_machine_name[MIPS_MACHINE_NAME_LEN];
+
+#define MIPS_MACHINE(_type, _name, _setup) \
+static struct mips_machine machine_##_type __initdata = \
+{ \
+ .mach_type = _type, \
+ .mach_name = _name, \
+ .mach_setup = _setup, \
+}; \
+ \
+static int __init register_machine_##_type(void) \
+{ \
+ mips_machine_register(&machine_##_type); \
+ return 0; \
+} \
+ \
+pure_initcall(register_machine_##_type)
+
+#endif /* __ASM_MIPS_MACHINE_H */
+
--- /dev/null
+++ b/arch/mips/kernel/mips_machine.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <asm/mips_machine.h>
+#include <asm/bootinfo.h>
+
+static struct list_head mips_machines __initdata =
+ LIST_HEAD_INIT(mips_machines);
+
+unsigned char mips_machine_name[MIPS_MACHINE_NAME_LEN] = "Unknown";
+
+static struct mips_machine * __init mips_machine_find(unsigned long machtype)
+{
+ struct list_head *this;
+
+ list_for_each(this, &mips_machines) {
+ struct mips_machine *mach;
+
+ mach = list_entry(this, struct mips_machine, list);
+ if (mach->mach_type == machtype)
+ return mach;
+ }
+
+ return NULL;
+}
+
+void __init mips_machine_register(struct mips_machine *mach)
+{
+ list_add_tail(&mach->list, &mips_machines);
+}
+
+void __init mips_machine_setup(void)
+{
+ struct mips_machine *mach;
+
+ mach = mips_machine_find(mips_machtype);
+ if (!mach) {
+ printk(KERN_ALERT "MIPS: no machine registered for "
+ "machtype %lu\n", mips_machtype);
+ return;
+ }
+
+ if (mach->mach_name[0])
+ strncpy(mips_machine_name, mach->mach_name,
+ MIPS_MACHINE_NAME_LEN);
+
+ printk(KERN_INFO "MIPS: machine is %s\n", mips_machine_name);
+
+ if (mach->mach_setup)
+ mach->mach_setup();
+}
+
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -79,6 +79,7 @@
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o
CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -701,6 +701,7 @@
endchoice
+source "arch/mips/ar71xx/Kconfig"
source "arch/mips/au1000/Kconfig"
source "arch/mips/basler/excite/Kconfig"
source "arch/mips/jazz/Kconfig"
@@ -858,6 +859,9 @@
config MIPS_DISABLE_OBSOLETE_IDE
bool
+config MIPS_MACHINE
+ def_bool n
+
config NO_IOPORT
def_bool n

View File

@ -1,29 +0,0 @@
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -42,6 +42,7 @@
#include <asm/mmu_context.h>
#include <asm/types.h>
#include <asm/stacktrace.h>
+#include <asm/time.h>
extern asmlinkage void handle_int(void);
extern asmlinkage void handle_tlbm(void);
@@ -1379,6 +1380,8 @@
*/
if (cpu_has_mips_r2) {
cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
+ if (get_c0_compare_irq)
+ cp0_compare_irq = get_c0_compare_irq();
cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
if (cp0_perfcount_irq == cp0_compare_irq)
cp0_perfcount_irq = -1;
--- a/include/asm-mips/time.h
+++ b/include/asm-mips/time.h
@@ -53,6 +53,7 @@
#ifdef CONFIG_CEVT_R4K
extern int mips_clockevent_init(void);
extern unsigned int __weak get_c0_compare_int(void);
+extern unsigned int __weak get_c0_compare_irq(void);
#else
static inline int mips_clockevent_init(void)
{

View File

@ -1,45 +0,0 @@
--- a/include/asm-mips/hazards.h
+++ b/include/asm-mips/hazards.h
@@ -64,7 +64,7 @@
_ehb
)
ASMMACRO(back_to_back_c0_hazard,
- _ehb
+ _ssnop; _ssnop; _ssnop; _ehb
)
/*
* gcc has a tradition of misscompiling the previous construct using the
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -187,7 +187,7 @@
*/
if (c0_compare_int_pending()) {
write_c0_compare(read_c0_count());
- irq_disable_hazard();
+ back_to_back_c0_hazard();
if (c0_compare_int_pending())
return 0;
}
@@ -196,7 +196,7 @@
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
- irq_disable_hazard();
+ back_to_back_c0_hazard();
if ((int)(read_c0_count() - cnt) < 0)
break;
/* increase delta if the timer was already expired */
@@ -205,11 +205,12 @@
while ((int)(read_c0_count() - cnt) <= 0)
; /* Wait for expiry */
+ back_to_back_c0_hazard();
if (!c0_compare_int_pending())
return 0;
write_c0_compare(read_c0_count());
- irq_disable_hazard();
+ back_to_back_c0_hazard();
if (c0_compare_int_pending())
return 0;