mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-25 03:32:25 +02:00
[ar71xx] remove 2.6.26 specific stuff
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14493 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
parent
0a23e243d6
commit
3da5343a66
@ -1,266 +0,0 @@
|
||||
CONFIG_32BIT=y
|
||||
# CONFIG_64BIT is not set
|
||||
# CONFIG_8139TOO is not set
|
||||
CONFIG_ADM6996_PHY=y
|
||||
CONFIG_AG71XX=y
|
||||
# CONFIG_AR71XX_EARLY_SERIAL is not set
|
||||
CONFIG_AR71XX_MACH_AP83=y
|
||||
CONFIG_AR71XX_MACH_AW_NR580=y
|
||||
CONFIG_AR71XX_MACH_GENERIC=y
|
||||
CONFIG_AR71XX_MACH_MZK_W04NU=y
|
||||
CONFIG_AR71XX_MACH_MZK_W300NH=y
|
||||
CONFIG_AR71XX_MACH_PB42=y
|
||||
CONFIG_AR71XX_MACH_RB_4XX=y
|
||||
CONFIG_AR71XX_MACH_TEW_632BRP=y
|
||||
CONFIG_AR71XX_MACH_UBNT=y
|
||||
CONFIG_AR71XX_MACH_WNR2000=y
|
||||
CONFIG_AR71XX_MACH_WP543=y
|
||||
CONFIG_AR71XX_WDT=y
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ATHEROS_AR71XX=y
|
||||
CONFIG_BASE_SMALL=0
|
||||
# CONFIG_BCM47XX is not set
|
||||
CONFIG_BITREVERSE=y
|
||||
# CONFIG_BROADCOM_PHY is not set
|
||||
CONFIG_CEVT_R4K=y
|
||||
CONFIG_CLASSIC_RCU=y
|
||||
CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 init=/etc/preinit"
|
||||
CONFIG_CPU_BIG_ENDIAN=y
|
||||
CONFIG_CPU_HAS_LLSC=y
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
# CONFIG_CPU_LITTLE_ENDIAN is not set
|
||||
# CONFIG_CPU_LOONGSON2 is not set
|
||||
CONFIG_CPU_MIPS32=y
|
||||
# CONFIG_CPU_MIPS32_R1 is not set
|
||||
CONFIG_CPU_MIPS32_R2=y
|
||||
# CONFIG_CPU_MIPS64_R1 is not set
|
||||
# CONFIG_CPU_MIPS64_R2 is not set
|
||||
CONFIG_CPU_MIPSR2=y
|
||||
# CONFIG_CPU_NEVADA is not set
|
||||
# CONFIG_CPU_R10000 is not set
|
||||
# CONFIG_CPU_R3000 is not set
|
||||
# CONFIG_CPU_R4300 is not set
|
||||
# CONFIG_CPU_R4X00 is not set
|
||||
# CONFIG_CPU_R5000 is not set
|
||||
# CONFIG_CPU_R5432 is not set
|
||||
# CONFIG_CPU_R6000 is not set
|
||||
# CONFIG_CPU_R8000 is not set
|
||||
# CONFIG_CPU_RM7000 is not set
|
||||
# CONFIG_CPU_RM9000 is not set
|
||||
# CONFIG_CPU_SB1 is not set
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
# CONFIG_CPU_TX39XX is not set
|
||||
# CONFIG_CPU_TX49XX is not set
|
||||
# CONFIG_CPU_VR41XX is not set
|
||||
CONFIG_CSRC_R4K=y
|
||||
CONFIG_DEVPORT=y
|
||||
# CONFIG_DM9000 is not set
|
||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
# CONFIG_E1000E_ENABLED is not set
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_FIXED_PHY is not set
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
# CONFIG_HAVE_DMA_ATTRS is not set
|
||||
CONFIG_HAVE_GPIO_LIB=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
# CONFIG_HAVE_KPROBES is not set
|
||||
# CONFIG_HAVE_KRETPROBES is not set
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
CONFIG_HW_RANDOM=m
|
||||
# CONFIG_I2C is not set
|
||||
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
||||
# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
||||
# CONFIG_IBM_NEW_EMAC_TAH is not set
|
||||
# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
||||
CONFIG_ICPLUS_PHY=y
|
||||
# CONFIG_IDE is not set
|
||||
CONFIG_INITRAMFS_ROOT_GID=0
|
||||
CONFIG_INITRAMFS_ROOT_UID=0
|
||||
CONFIG_INITRAMFS_SOURCE="../../root"
|
||||
CONFIG_IPV6_NDISC_NODETYPE=y
|
||||
CONFIG_IRQ_CPU=y
|
||||
# CONFIG_IWLWIFI_LEDS is not set
|
||||
# CONFIG_LEDS_ALIX is not set
|
||||
CONFIG_LEDS_GPIO=y
|
||||
# CONFIG_LEMOTE_FULONG is not set
|
||||
# CONFIG_M25PXX_USE_FAST_READ is not set
|
||||
# CONFIG_MACH_ALCHEMY is not set
|
||||
# CONFIG_MACH_DECSTATION is not set
|
||||
# CONFIG_MACH_JAZZ is not set
|
||||
# CONFIG_MACH_VR41XX is not set
|
||||
# CONFIG_MDIO_BITBANG is not set
|
||||
CONFIG_MICREL_PHY=y
|
||||
CONFIG_MIPS=y
|
||||
# CONFIG_MIPS_ATLAS is not set
|
||||
# CONFIG_MIPS_COBALT is not set
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
CONFIG_MIPS_MACHINE=y
|
||||
# CONFIG_MIPS_MALTA is not set
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
# CONFIG_MIPS_MT_SMP is not set
|
||||
# CONFIG_MIPS_MT_SMTC is not set
|
||||
# CONFIG_MIPS_SEAD is not set
|
||||
# CONFIG_MIPS_SIM is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
# CONFIG_MTD_ALAUDA is not set
|
||||
CONFIG_MTD_BLKDEVS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
# CONFIG_MTD_CFI is not set
|
||||
CONFIG_MTD_CFI_I1=y
|
||||
CONFIG_MTD_CFI_I2=y
|
||||
# CONFIG_MTD_CFI_I4 is not set
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
CONFIG_MTD_CHAR=y
|
||||
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
CONFIG_MTD_CONCAT=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
# CONFIG_MTD_DOC2000 is not set
|
||||
# CONFIG_MTD_DOC2001 is not set
|
||||
# CONFIG_MTD_DOC2001PLUS is not set
|
||||
# CONFIG_MTD_JEDECPROBE is not set
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
CONFIG_MTD_MYLOADER_PARTS=y
|
||||
CONFIG_MTD_NAND=y
|
||||
# CONFIG_MTD_NAND_CAFE is not set
|
||||
# CONFIG_MTD_NAND_DISKONCHIP is not set
|
||||
# CONFIG_MTD_NAND_ECC_SMC is not set
|
||||
CONFIG_MTD_NAND_IDS=y
|
||||
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
||||
# CONFIG_MTD_NAND_NANDSIM is not set
|
||||
# CONFIG_MTD_NAND_PLATFORM is not set
|
||||
CONFIG_MTD_NAND_RB4XX=y
|
||||
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
# CONFIG_MTD_PMC551 is not set
|
||||
# CONFIG_MTD_RAM is not set
|
||||
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
|
||||
CONFIG_MTD_REDBOOT_PARTS=y
|
||||
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
CONFIG_MYLOADER=y
|
||||
# CONFIG_NATSEMI is not set
|
||||
# CONFIG_NE2K_PCI is not set
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
# CONFIG_NO_IOPORT is not set
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
# CONFIG_PAGE_SIZE_16KB is not set
|
||||
CONFIG_PAGE_SIZE_4KB=y
|
||||
# CONFIG_PAGE_SIZE_64KB is not set
|
||||
# CONFIG_PAGE_SIZE_8KB is not set
|
||||
CONFIG_PCI=y
|
||||
# CONFIG_PCIPCWATCHDOG is not set
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
# CONFIG_PCSPKR_PLATFORM is not set
|
||||
CONFIG_PHYLIB=y
|
||||
# CONFIG_PMC_MSP is not set
|
||||
# CONFIG_PMC_YOSEMITE is not set
|
||||
# CONFIG_PNX8550_JBS is not set
|
||||
# CONFIG_PNX8550_STB810 is not set
|
||||
CONFIG_PROM_EMU=y
|
||||
# CONFIG_QSEMI_PHY is not set
|
||||
# CONFIG_R6040 is not set
|
||||
# CONFIG_REALTEK_PHY is not set
|
||||
CONFIG_RFKILL_LEDS=y
|
||||
CONFIG_RTC_LIB=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
CONFIG_SCSI_WAIT_SCAN=m
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
CONFIG_SERIAL_8250_NR_UARTS=1
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
|
||||
# CONFIG_SGI_IP22 is not set
|
||||
# CONFIG_SGI_IP27 is not set
|
||||
# CONFIG_SGI_IP28 is not set
|
||||
# CONFIG_SGI_IP32 is not set
|
||||
# CONFIG_SIBYTE_BIGSUR is not set
|
||||
# CONFIG_SIBYTE_CARMEL is not set
|
||||
# CONFIG_SIBYTE_CRHINE is not set
|
||||
# CONFIG_SIBYTE_CRHONE is not set
|
||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
||||
# CONFIG_SIBYTE_RHONE is not set
|
||||
# CONFIG_SIBYTE_SENTOSA is not set
|
||||
# CONFIG_SIBYTE_SWARM is not set
|
||||
# CONFIG_SMSC_PHY is not set
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_AR71XX=y
|
||||
CONFIG_SPI_BITBANG=y
|
||||
# CONFIG_SPI_GPIO is not set
|
||||
CONFIG_SPI_MASTER=y
|
||||
# CONFIG_SPI_SPIDEV is not set
|
||||
CONFIG_SSB_POSSIBLE=y
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
|
||||
# CONFIG_TC35815 is not set
|
||||
CONFIG_TICK_ONESHOT=y
|
||||
# CONFIG_TOSHIBA_JMR3927 is not set
|
||||
# CONFIG_TOSHIBA_RBTX4927 is not set
|
||||
# CONFIG_TOSHIBA_RBTX4938 is not set
|
||||
CONFIG_TRAD_SIGNALS=y
|
||||
CONFIG_USB=m
|
||||
CONFIG_USB_EHCI_AR71XX=y
|
||||
CONFIG_USB_EHCI_HCD=m
|
||||
CONFIG_USB_EHCI_ROOT_HUB_TT=y
|
||||
CONFIG_USB_OHCI_AR71XX=y
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
||||
CONFIG_USB_OHCI_HCD=m
|
||||
CONFIG_USB_SUPPORT=y
|
||||
# CONFIG_USB_UHCI_HCD is not set
|
||||
# CONFIG_VGASTATE is not set
|
||||
# CONFIG_VIA_RHINE is not set
|
||||
CONFIG_VIDEO_MEDIA=m
|
||||
CONFIG_VIDEO_V4L2=m
|
||||
CONFIG_VIDEO_V4L2_COMMON=m
|
||||
CONFIG_YAFFS_9BYTE_TAGS=y
|
||||
CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y
|
||||
CONFIG_YAFFS_AUTO_YAFFS2=y
|
||||
CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0
|
||||
# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
|
||||
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
||||
CONFIG_YAFFS_FS=y
|
||||
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
||||
CONFIG_YAFFS_YAFFS1=y
|
||||
CONFIG_YAFFS_YAFFS2=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
@ -1,51 +0,0 @@
|
||||
--- a/arch/mips/Makefile
|
||||
+++ b/arch/mips/Makefile
|
||||
@@ -597,6 +597,13 @@ core-$(CONFIG_TOSHIBA_RBTX4938) += arch/
|
||||
cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx
|
||||
load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
|
||||
|
||||
+#
|
||||
+# Atheros AR71xx
|
||||
+#
|
||||
+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/
|
||||
+cflags-$(CONFIG_ATHEROS_AR71XX) += -Iinclude/asm-mips/mach-ar71xx
|
||||
+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000
|
||||
+
|
||||
# temporary until string.h is fixed
|
||||
cflags-y += -ffreestanding
|
||||
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -21,6 +21,24 @@ choice
|
||||
config MACH_ALCHEMY
|
||||
bool "Alchemy processor based machines"
|
||||
|
||||
+config ATHEROS_AR71XX
|
||||
+ bool "Atheros AR71xx based boards"
|
||||
+ select CEVT_R4K
|
||||
+ select CSRC_R4K
|
||||
+ select DMA_NONCOHERENT
|
||||
+ select HW_HAS_PCI
|
||||
+ select IRQ_CPU
|
||||
+ select GENERIC_GPIO
|
||||
+ select HAVE_GPIO_LIB
|
||||
+ select SYS_HAS_CPU_MIPS32_R1
|
||||
+ select SYS_HAS_CPU_MIPS32_R2
|
||||
+ select SYS_SUPPORTS_32BIT_KERNEL
|
||||
+ select SYS_SUPPORTS_BIG_ENDIAN
|
||||
+ select SYS_HAS_EARLY_PRINTK
|
||||
+ select MIPS_MACHINE
|
||||
+ help
|
||||
+ Support for Atheros AR71xx based boards.
|
||||
+
|
||||
config BASLER_EXCITE
|
||||
bool "Basler eXcite smart camera"
|
||||
select CEVT_R4K
|
||||
@@ -687,6 +705,7 @@ config WR_PPMC
|
||||
|
||||
endchoice
|
||||
|
||||
+source "arch/mips/ar71xx/Kconfig"
|
||||
source "arch/mips/au1000/Kconfig"
|
||||
source "arch/mips/basler/excite/Kconfig"
|
||||
source "arch/mips/jazz/Kconfig"
|
@ -1,10 +0,0 @@
|
||||
--- a/arch/mips/pci/Makefile
|
||||
+++ b/arch/mips/pci/Makefile
|
||||
@@ -15,6 +15,7 @@ obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.
|
||||
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
|
||||
obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
|
||||
obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
|
||||
+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o
|
||||
|
||||
#
|
||||
# These are still pretty much in the old state, watch, go blind.
|
@ -1,70 +0,0 @@
|
||||
--- a/drivers/usb/host/Kconfig
|
||||
+++ b/drivers/usb/host/Kconfig
|
||||
@@ -81,6 +81,12 @@ config USB_EHCI_BIG_ENDIAN_DESC
|
||||
depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
|
||||
default y
|
||||
|
||||
+config USB_EHCI_AR71XX
|
||||
+ bool "USB EHCI support for AR71xx"
|
||||
+ depends on USB_EHCI_HCD && ATHEROS_AR71XX
|
||||
+ help
|
||||
+ Support for Atheros AR71xx built-in EHCI controller
|
||||
+
|
||||
config USB_EHCI_FSL
|
||||
bool "Support for Freescale on-chip EHCI USB controller"
|
||||
depends on USB_EHCI_HCD && FSL_SOC
|
||||
@@ -152,6 +158,12 @@ config USB_OHCI_HCD
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called ohci-hcd.
|
||||
|
||||
+config USB_OHCI_AR71XX
|
||||
+ bool "USB OHCI support for Atheros AR71xx"
|
||||
+ depends on USB_OHCI_HCD && ATHEROS_AR71XX
|
||||
+ help
|
||||
+ Support for Atheros AR71xx built-in OHCI controller
|
||||
+
|
||||
config USB_OHCI_HCD_PPC_SOC
|
||||
bool "OHCI support for on-chip PPC USB controller"
|
||||
depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
|
||||
--- a/drivers/usb/host/ehci-hcd.c
|
||||
+++ b/drivers/usb/host/ehci-hcd.c
|
||||
@@ -1034,6 +1034,11 @@ MODULE_LICENSE ("GPL");
|
||||
#define PLATFORM_DRIVER ixp4xx_ehci_driver
|
||||
#endif
|
||||
|
||||
+#ifdef CONFIG_USB_EHCI_AR71XX
|
||||
+#include "ehci-ar71xx.c"
|
||||
+#define PLATFORM_DRIVER ehci_ar71xx_driver
|
||||
+#endif
|
||||
+
|
||||
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
|
||||
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
|
||||
#error "missing bus glue for ehci-hcd"
|
||||
--- a/drivers/usb/host/ohci.h
|
||||
+++ b/drivers/usb/host/ohci.h
|
||||
@@ -538,6 +538,11 @@ static inline struct usb_hcd *ohci_to_hc
|
||||
#define writel_be(val, addr) out_be32((__force unsigned *)addr, val)
|
||||
#endif
|
||||
|
||||
+#if defined(CONFIG_ATHEROS_AR71XX)
|
||||
+#define readl_be(addr) __raw_readl(addr)
|
||||
+#define writel_be(val, addr) __raw_writel(addr, val)
|
||||
+#endif
|
||||
+
|
||||
static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci,
|
||||
__hc32 __iomem * regs)
|
||||
{
|
||||
--- a/drivers/usb/host/ohci-hcd.c
|
||||
+++ b/drivers/usb/host/ohci-hcd.c
|
||||
@@ -1057,6 +1057,11 @@ MODULE_LICENSE ("GPL");
|
||||
#define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
|
||||
#endif
|
||||
|
||||
+#ifdef CONFIG_USB_OHCI_AR71XX
|
||||
+#include "ohci-ar71xx.c"
|
||||
+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver
|
||||
+#endif
|
||||
+
|
||||
#if !defined(PCI_DRIVER) && \
|
||||
!defined(PLATFORM_DRIVER) && \
|
||||
!defined(OF_PLATFORM_DRIVER) && \
|
@ -1,26 +0,0 @@
|
||||
--- a/drivers/spi/Kconfig
|
||||
+++ b/drivers/spi/Kconfig
|
||||
@@ -52,6 +52,13 @@ config SPI_MASTER
|
||||
comment "SPI Master Controller Drivers"
|
||||
depends on SPI_MASTER
|
||||
|
||||
+config SPI_AR71XX
|
||||
+ tristate "Atheros AR71xx SPI Controller"
|
||||
+ depends on SPI_MASTER && ATHEROS_AR71XX
|
||||
+ select SPI_BITBANG
|
||||
+ help
|
||||
+ This is the SPI contoller driver for Atheros AR71xx.
|
||||
+
|
||||
config SPI_ATMEL
|
||||
tristate "Atmel SPI Controller"
|
||||
depends on (ARCH_AT91 || AVR32) && SPI_MASTER
|
||||
--- a/drivers/spi/Makefile
|
||||
+++ b/drivers/spi/Makefile
|
||||
@@ -11,6 +11,7 @@ endif
|
||||
obj-$(CONFIG_SPI_MASTER) += spi.o
|
||||
|
||||
# SPI master controller drivers (bus)
|
||||
+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
|
||||
obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
|
||||
obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
|
||||
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
|
@ -1,21 +0,0 @@
|
||||
--- a/drivers/net/Kconfig
|
||||
+++ b/drivers/net/Kconfig
|
||||
@@ -2060,6 +2060,8 @@ config ACENIC_OMIT_TIGON_I
|
||||
|
||||
The safe and default value for this is N.
|
||||
|
||||
+source drivers/net/ag71xx/Kconfig
|
||||
+
|
||||
config DL2K
|
||||
tristate "DL2000/TC902x-based Gigabit Ethernet support"
|
||||
depends on PCI
|
||||
--- a/drivers/net/Makefile
|
||||
+++ b/drivers/net/Makefile
|
||||
@@ -2,6 +2,7 @@
|
||||
# Makefile for the Linux network (ethercard) device drivers.
|
||||
#
|
||||
|
||||
+obj-$(CONFIG_AG71XX) += ag71xx/
|
||||
obj-$(CONFIG_E1000) += e1000/
|
||||
obj-$(CONFIG_E1000E) += e1000e/
|
||||
obj-$(CONFIG_IBM_EMAC) += ibm_emac/
|
@ -1,26 +0,0 @@
|
||||
--- a/drivers/watchdog/Kconfig
|
||||
+++ b/drivers/watchdog/Kconfig
|
||||
@@ -683,6 +683,13 @@ config TXX9_WDT
|
||||
help
|
||||
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
|
||||
|
||||
+config AR71XX_WDT
|
||||
+ tristate "Atheros AR71xx Watchdog Timer"
|
||||
+ depends on ATHEROS_AR71XX
|
||||
+ help
|
||||
+ Hardware driver for the built-in watchdog timer on the Atheros
|
||||
+ AR71xx SoCs.
|
||||
+
|
||||
# PARISC Architecture
|
||||
|
||||
# POWERPC Architecture
|
||||
--- a/drivers/watchdog/Makefile
|
||||
+++ b/drivers/watchdog/Makefile
|
||||
@@ -97,6 +97,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
|
||||
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
|
||||
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
|
||||
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
|
||||
+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
|
||||
|
||||
# PARISC Architecture
|
||||
|
@ -1,13 +0,0 @@
|
||||
--- a/drivers/mtd/devices/m25p80.c
|
||||
+++ b/drivers/mtd/devices/m25p80.c
|
||||
@@ -455,6 +455,10 @@ static struct flash_info __devinitdata m
|
||||
{ "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
|
||||
{ "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },
|
||||
|
||||
+ /* PMC -- pm25x "blocks" are 32K, sectors are 4K */
|
||||
+ { "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
|
||||
+ { "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
|
||||
+
|
||||
/* Spansion -- single (large) sector size only, at least
|
||||
* for the chips listed here (without boot sectors).
|
||||
*/
|
@ -1,23 +0,0 @@
|
||||
--- a/drivers/net/phy/Kconfig
|
||||
+++ b/drivers/net/phy/Kconfig
|
||||
@@ -82,6 +82,11 @@ config MVSWITCH_PHY
|
||||
---help---
|
||||
Currently supports the Marvell 88E6060 switch.
|
||||
|
||||
+config MICREL_PHY
|
||||
+ tristate "Drivers for Micrel/Kendin PHYs"
|
||||
+ ---help---
|
||||
+ Currently has a driver for the KSZ8041
|
||||
+
|
||||
config FIXED_PHY
|
||||
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
|
||||
depends on PHYLIB=y
|
||||
--- a/drivers/net/phy/Makefile
|
||||
+++ b/drivers/net/phy/Makefile
|
||||
@@ -16,5 +16,6 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
|
||||
obj-$(CONFIG_ADM6996_PHY) += adm6996.o
|
||||
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
|
||||
obj-$(CONFIG_REALTEK_PHY) += realtek.o
|
||||
+obj-$(CONFIG_MICREL_PHY) += micrel.o
|
||||
obj-$(CONFIG_FIXED_PHY) += fixed.o
|
||||
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
|
@ -1,22 +0,0 @@
|
||||
--- a/drivers/mtd/devices/m25p80.c
|
||||
+++ b/drivers/mtd/devices/m25p80.c
|
||||
@@ -645,12 +645,17 @@ static int __devinit m25p_probe(struct s
|
||||
struct mtd_partition *parts = NULL;
|
||||
int nr_parts = 0;
|
||||
|
||||
+ static const char *part_probes[] = {
|
||||
#ifdef CONFIG_MTD_CMDLINE_PARTS
|
||||
- static const char *part_probes[] = { "cmdlinepart", NULL, };
|
||||
+ "cmdlinepart",
|
||||
+#endif
|
||||
+#ifdef CONFIG_MTD_MYLOADER_PARTS
|
||||
+ "MyLoader",
|
||||
+#endif
|
||||
+ NULL, };
|
||||
|
||||
nr_parts = parse_mtd_partitions(&flash->mtd,
|
||||
part_probes, &parts, 0);
|
||||
-#endif
|
||||
|
||||
if (nr_parts <= 0 && data && data->parts) {
|
||||
parts = data->parts;
|
@ -1,12 +0,0 @@
|
||||
--- a/drivers/mtd/devices/m25p80.c
|
||||
+++ b/drivers/mtd/devices/m25p80.c
|
||||
@@ -455,6 +455,9 @@ static struct flash_info __devinitdata m
|
||||
{ "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
|
||||
{ "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },
|
||||
|
||||
+ /* EON -- en25px */
|
||||
+ { "en25p32", 0x1c2016, 64 * 1024, 64, },
|
||||
+
|
||||
/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
|
||||
{ "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
|
||||
{ "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
|
@ -1,12 +0,0 @@
|
||||
--- a/drivers/mtd/devices/m25p80.c
|
||||
+++ b/drivers/mtd/devices/m25p80.c
|
||||
@@ -655,6 +655,9 @@ static int __devinit m25p_probe(struct s
|
||||
#ifdef CONFIG_MTD_MYLOADER_PARTS
|
||||
"MyLoader",
|
||||
#endif
|
||||
+#ifdef CONFIG_MTD_REDBOOT_PARTS
|
||||
+ "RedBoot",
|
||||
+#endif
|
||||
NULL, };
|
||||
|
||||
nr_parts = parse_mtd_partitions(&flash->mtd,
|
@ -1,14 +0,0 @@
|
||||
--- a/drivers/mtd/devices/m25p80.c
|
||||
+++ b/drivers/mtd/devices/m25p80.c
|
||||
@@ -458,6 +458,11 @@ static struct flash_info __devinitdata m
|
||||
/* EON -- en25px */
|
||||
{ "en25p32", 0x1c2016, 64 * 1024, 64, },
|
||||
|
||||
+ /* Macronix -- mx25lxxx */
|
||||
+ { "mx25l32", 0xc22016, 64 * 1024, 64, },
|
||||
+ { "mx25l64", 0xc22017, 64 * 1024, 128, },
|
||||
+ { "mx25l128", 0xc22018, 64 * 1024, 256, },
|
||||
+
|
||||
/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
|
||||
{ "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
|
||||
{ "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
|
@ -1,54 +0,0 @@
|
||||
--- a/drivers/mtd/redboot.c
|
||||
+++ b/drivers/mtd/redboot.c
|
||||
@@ -62,31 +62,32 @@ static int parse_redboot_partitions(stru
|
||||
static char nullstring[] = "unallocated";
|
||||
#endif
|
||||
|
||||
+ buf = vmalloc(master->erasesize);
|
||||
+ if (!buf)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ restart:
|
||||
if ( directory < 0 ) {
|
||||
offset = master->size + directory * master->erasesize;
|
||||
- while (master->block_isbad &&
|
||||
+ while (master->block_isbad &&
|
||||
master->block_isbad(master, offset)) {
|
||||
if (!offset) {
|
||||
nogood:
|
||||
printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
|
||||
+ vfree(buf);
|
||||
return -EIO;
|
||||
}
|
||||
offset -= master->erasesize;
|
||||
}
|
||||
} else {
|
||||
offset = directory * master->erasesize;
|
||||
- while (master->block_isbad &&
|
||||
+ while (master->block_isbad &&
|
||||
master->block_isbad(master, offset)) {
|
||||
offset += master->erasesize;
|
||||
if (offset == master->size)
|
||||
goto nogood;
|
||||
}
|
||||
}
|
||||
- buf = vmalloc(master->erasesize);
|
||||
-
|
||||
- if (!buf)
|
||||
- return -ENOMEM;
|
||||
-
|
||||
printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
|
||||
master->name, offset);
|
||||
|
||||
@@ -158,6 +159,11 @@ static int parse_redboot_partitions(stru
|
||||
}
|
||||
if (i == numslots) {
|
||||
/* Didn't find it */
|
||||
+ if (offset + master->erasesize < master->size) {
|
||||
+ /* not at the end of the flash yet, maybe next block :) */
|
||||
+ directory++;
|
||||
+ goto restart;
|
||||
+ }
|
||||
printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
|
||||
master->name);
|
||||
ret = 0;
|
@ -1,21 +0,0 @@
|
||||
--- a/drivers/mtd/nand/Kconfig
|
||||
+++ b/drivers/mtd/nand/Kconfig
|
||||
@@ -386,4 +386,8 @@ config MTD_NAND_FSL_UPM
|
||||
Enables support for NAND Flash chips wired onto Freescale PowerPC
|
||||
processor localbus with User-Programmable Machine support.
|
||||
|
||||
+config MTD_NAND_RB4XX
|
||||
+ tristate "NAND flash driver for RouterBoard 4xx series"
|
||||
+ depends on MTD_NAND && ATHEROS_AR71XX
|
||||
+
|
||||
endif # MTD_NAND
|
||||
--- a/drivers/mtd/nand/Makefile
|
||||
+++ b/drivers/mtd/nand/Makefile
|
||||
@@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
|
||||
obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
|
||||
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
|
||||
+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
|
||||
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
|
||||
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
|
@ -1,22 +0,0 @@
|
||||
--- a/arch/mips/Makefile
|
||||
+++ b/arch/mips/Makefile
|
||||
@@ -158,6 +158,7 @@ endif
|
||||
#
|
||||
libs-$(CONFIG_ARC) += arch/mips/fw/arc/
|
||||
libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
|
||||
+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
|
||||
libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
|
||||
libs-y += arch/mips/fw/lib/
|
||||
libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -874,6 +874,9 @@ config MIPS_NILE4
|
||||
config MIPS_DISABLE_OBSOLETE_IDE
|
||||
bool
|
||||
|
||||
+config MYLOADER
|
||||
+ bool
|
||||
+
|
||||
config SYNC_R4K
|
||||
bool
|
||||
|
@ -1,10 +0,0 @@
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -36,6 +36,7 @@ config ATHEROS_AR71XX
|
||||
select SYS_SUPPORTS_BIG_ENDIAN
|
||||
select SYS_HAS_EARLY_PRINTK
|
||||
select MIPS_MACHINE
|
||||
+ select PROM_EMU
|
||||
help
|
||||
Support for Atheros AR71xx based boards.
|
||||
|
@ -1,29 +0,0 @@
|
||||
--- a/arch/mips/kernel/traps.c
|
||||
+++ b/arch/mips/kernel/traps.c
|
||||
@@ -43,6 +43,7 @@
|
||||
#include <asm/mmu_context.h>
|
||||
#include <asm/types.h>
|
||||
#include <asm/stacktrace.h>
|
||||
+#include <asm/time.h>
|
||||
|
||||
extern asmlinkage void handle_int(void);
|
||||
extern asmlinkage void handle_tlbm(void);
|
||||
@@ -1464,6 +1465,8 @@ void __cpuinit per_cpu_trap_init(void)
|
||||
*/
|
||||
if (cpu_has_mips_r2) {
|
||||
cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
|
||||
+ if (get_c0_compare_irq)
|
||||
+ cp0_compare_irq = get_c0_compare_irq();
|
||||
cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
|
||||
if (cp0_perfcount_irq == cp0_compare_irq)
|
||||
cp0_perfcount_irq = -1;
|
||||
--- a/include/asm-mips/time.h
|
||||
+++ b/include/asm-mips/time.h
|
||||
@@ -53,6 +53,7 @@ extern int (*perf_irq)(void);
|
||||
#ifdef CONFIG_CEVT_R4K
|
||||
extern int mips_clockevent_init(void);
|
||||
extern unsigned int __weak get_c0_compare_int(void);
|
||||
+extern unsigned int __weak get_c0_compare_irq(void);
|
||||
#else
|
||||
static inline int mips_clockevent_init(void)
|
||||
{
|
@ -1,65 +0,0 @@
|
||||
--- a/arch/mips/kernel/cevt-r4k.c
|
||||
+++ b/arch/mips/kernel/cevt-r4k.c
|
||||
@@ -13,6 +13,22 @@
|
||||
#include <asm/smtc_ipi.h>
|
||||
#include <asm/time.h>
|
||||
|
||||
+/*
|
||||
+ * Compare interrupt can be routed and latched outside the core,
|
||||
+ * so a single execution hazard barrier may not be enough to give
|
||||
+ * it time to clear as seen in the Cause register. 4 time the
|
||||
+ * pipeline depth seems reasonably conservative, and empirically
|
||||
+ * works better in configurations with high CPU/bus clock ratios.
|
||||
+ */
|
||||
+
|
||||
+#define compare_change_hazard() \
|
||||
+ do { \
|
||||
+ irq_disable_hazard(); \
|
||||
+ irq_disable_hazard(); \
|
||||
+ irq_disable_hazard(); \
|
||||
+ irq_disable_hazard(); \
|
||||
+ } while (0)
|
||||
+
|
||||
static int mips_next_event(unsigned long delta,
|
||||
struct clock_event_device *evt)
|
||||
{
|
||||
@@ -28,6 +44,7 @@ static int mips_next_event(unsigned long
|
||||
cnt = read_c0_count();
|
||||
cnt += delta;
|
||||
write_c0_compare(cnt);
|
||||
+ compare_change_hazard();
|
||||
res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
|
||||
#ifdef CONFIG_MIPS_MT_SMTC
|
||||
evpe(vpflags);
|
||||
@@ -187,7 +204,7 @@ static int c0_compare_int_usable(void)
|
||||
*/
|
||||
if (c0_compare_int_pending()) {
|
||||
write_c0_compare(read_c0_count());
|
||||
- irq_disable_hazard();
|
||||
+ compare_change_hazard();
|
||||
if (c0_compare_int_pending())
|
||||
return 0;
|
||||
}
|
||||
@@ -196,7 +213,7 @@ static int c0_compare_int_usable(void)
|
||||
cnt = read_c0_count();
|
||||
cnt += delta;
|
||||
write_c0_compare(cnt);
|
||||
- irq_disable_hazard();
|
||||
+ compare_change_hazard();
|
||||
if ((int)(read_c0_count() - cnt) < 0)
|
||||
break;
|
||||
/* increase delta if the timer was already expired */
|
||||
@@ -205,11 +222,12 @@ static int c0_compare_int_usable(void)
|
||||
while ((int)(read_c0_count() - cnt) <= 0)
|
||||
; /* Wait for expiry */
|
||||
|
||||
+ compare_change_hazard();
|
||||
if (!c0_compare_int_pending())
|
||||
return 0;
|
||||
|
||||
write_c0_compare(read_c0_count());
|
||||
- irq_disable_hazard();
|
||||
+ compare_change_hazard();
|
||||
if (c0_compare_int_pending())
|
||||
return 0;
|
||||
|
Loading…
Reference in New Issue
Block a user