qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-27 17:13:11 +02:00
Code

ramips: W306R V2.0 - GPIO and Network fixes

Browse Source 
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg 2012-05-02 19:17:59 +00:00
parent 1f249922ce
commit 439a47e380
4 changed files with 16 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
target/linux/ramips/base-files/etc/diag.sh
View File

@ -82,7 +82,7 @@ get_status_led() {
status_led="v22rw-2x2:green:security"
;;
w306r-v20)
status_led="w306r:green:sys"
status_led="w306r-v20:green:sys"
;;
w502u)
status_led="alfa:blue:wps"

1
target/linux/ramips/base-files/etc/uci-defaults/network
View File

@ -59,7 +59,6 @@ ramips_setup_interfaces()
;;
freestation5 | \
w306r-v20 | \
wcr-150gn)
ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
;;

4
target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c
View File

@ -20,7 +20,7 @@
#include "devices.h"
#define W306R_V20_GPIO_LED_SYS 9 /* FIXME */
#define W306R_V20_GPIO_LED_SYS 9
#define W306R_V20_GPIO_LED_WPS 13
#define W306R_V20_GPIO_BUTTON_RESET 10
@ -57,7 +57,7 @@ static void __init w306r_v20_init(void)
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(w306r_v20_leds_gpio),
w306r_v20_leds_gpio);

13
target/linux/ramips/image/Makefile
View File

@ -220,6 +220,18 @@ define BuildFirmware/RTN10PLUS
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_rtn10plus)),$(mtd_rtn10plus_kernel_part_size),$(mtd_rtn10plus_rootfs_part_size))
endef
define BuildFirmware/W306R_4M
$(call BuildFirmware/w306r,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)),917504,2949120)
endef
define BuildFirmware/w306r
$(call PatchKernelLzma,$(2),$(3))
mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry)\
-n 'linkn Kernel Image' \
-d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage
$(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(4),$(KDIR)/root.$(1),$(5),$(call imgname,$(1),$(2))-factory.bin)
endef
mtdlayout_whrg300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware)
define BuildFirmware/WHRG300N
$(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N,ttyS1,57600,phys)
@ -377,6 +389,7 @@ endef
define Image/Build/Profile/W306R_V20
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,w306r-v20,W306R_V20,ttyS1,57600,phys)
$(call Image/Build/Template/$(fs_squash)/$(1),W306R_4M,w306r-v20,W306R_V20,ttyS1,57600,phys)
endef
define Image/Build/Profile/W502U