mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-09-03 22:19:20 +03:00
ar71xx: rewrite WNDR3700/3800 handling
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
parent
62f688b6ec
commit
44a7438217
@ -1,69 +0,0 @@
|
|||||||
config interface loopback
|
|
||||||
option ifname lo
|
|
||||||
option proto static
|
|
||||||
option ipaddr 127.0.0.1
|
|
||||||
option netmask 255.0.0.0
|
|
||||||
|
|
||||||
config interface lan
|
|
||||||
option ifname eth0.1
|
|
||||||
option type bridge
|
|
||||||
option proto static
|
|
||||||
option ipaddr 192.168.1.1
|
|
||||||
option netmask 255.255.255.0
|
|
||||||
|
|
||||||
config interface wan
|
|
||||||
option ifname eth1
|
|
||||||
option proto dhcp
|
|
||||||
|
|
||||||
config switch
|
|
||||||
option name rtl8366s
|
|
||||||
option reset 1
|
|
||||||
option enable_vlan 1
|
|
||||||
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
|
|
||||||
option blinkrate 2
|
|
||||||
|
|
||||||
config switch_vlan
|
|
||||||
option device rtl8366s
|
|
||||||
option vlan 1
|
|
||||||
option ports "0 1 2 3 5t"
|
|
||||||
|
|
||||||
config switch_port
|
|
||||||
# Port 1 controls the GREEN configuration of LEDs for
|
|
||||||
# the switch and the section does not correspond to a real
|
|
||||||
# switch port.
|
|
||||||
#
|
|
||||||
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
|
|
||||||
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
|
|
||||||
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
|
|
||||||
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
|
|
||||||
# 14: Link (master); 15: separate register
|
|
||||||
|
|
||||||
option device rtl8366s
|
|
||||||
option port 1
|
|
||||||
option led 6
|
|
||||||
|
|
||||||
config switch_port
|
|
||||||
# Port 2 controls the ORANGE configuration of LEDs for
|
|
||||||
# the switch and the section does not correspond to a real
|
|
||||||
# switch port.
|
|
||||||
#
|
|
||||||
# See the key above for switch port 1 for the meaning of the
|
|
||||||
# 'led' setting below.
|
|
||||||
|
|
||||||
option device rtl8366s
|
|
||||||
option port 2
|
|
||||||
option led 9
|
|
||||||
|
|
||||||
config switch_port
|
|
||||||
# Port 5 controls the configuration of the WAN LED and the
|
|
||||||
# section does not correspond to a real switch port.
|
|
||||||
#
|
|
||||||
# To toggle the use of green or orange LEDs for the WAN port,
|
|
||||||
# see the LED setting for wndr3700:green:wan in /etc/config/system.
|
|
||||||
#
|
|
||||||
# See the key above for switch port 1 for the meaning of the
|
|
||||||
# 'led' setting below.
|
|
||||||
|
|
||||||
option device rtl8366s
|
|
||||||
option port 5
|
|
||||||
option led 2
|
|
@ -1,69 +0,0 @@
|
|||||||
config interface loopback
|
|
||||||
option ifname lo
|
|
||||||
option proto static
|
|
||||||
option ipaddr 127.0.0.1
|
|
||||||
option netmask 255.0.0.0
|
|
||||||
|
|
||||||
config interface lan
|
|
||||||
option ifname eth0.1
|
|
||||||
option type bridge
|
|
||||||
option proto static
|
|
||||||
option ipaddr 192.168.1.1
|
|
||||||
option netmask 255.255.255.0
|
|
||||||
|
|
||||||
config interface wan
|
|
||||||
option ifname eth1
|
|
||||||
option proto dhcp
|
|
||||||
|
|
||||||
config switch
|
|
||||||
option name rtl8366s
|
|
||||||
option reset 1
|
|
||||||
option enable_vlan 1
|
|
||||||
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
|
|
||||||
option blinkrate 2
|
|
||||||
|
|
||||||
config switch_vlan
|
|
||||||
option device rtl8366s
|
|
||||||
option vlan 1
|
|
||||||
option ports "0 1 2 3 5t"
|
|
||||||
|
|
||||||
config switch_port
|
|
||||||
# Port 1 controls the GREEN configuration of LEDs for
|
|
||||||
# the switch and the section does not correspond to a real
|
|
||||||
# switch port.
|
|
||||||
#
|
|
||||||
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
|
|
||||||
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
|
|
||||||
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
|
|
||||||
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
|
|
||||||
# 14: Link (master); 15: separate register
|
|
||||||
|
|
||||||
option device rtl8366s
|
|
||||||
option port 1
|
|
||||||
option led 6
|
|
||||||
|
|
||||||
config switch_port
|
|
||||||
# Port 2 controls the ORANGE configuration of LEDs for
|
|
||||||
# the switch and the section does not correspond to a real
|
|
||||||
# switch port.
|
|
||||||
#
|
|
||||||
# See the key above for switch port 1 for the meaning of the
|
|
||||||
# 'led' setting below.
|
|
||||||
|
|
||||||
option device rtl8366s
|
|
||||||
option port 2
|
|
||||||
option led 9
|
|
||||||
|
|
||||||
config switch_port
|
|
||||||
# Port 5 controls the configuration of the WAN LED and the
|
|
||||||
# section does not correspond to a real switch port.
|
|
||||||
#
|
|
||||||
# To toggle the use of green or orange LEDs for the WAN port,
|
|
||||||
# see the LED setting for wndr3700:green:wan in /etc/config/system.
|
|
||||||
#
|
|
||||||
# See the key above for switch port 1 for the meaning of the
|
|
||||||
# 'led' setting below.
|
|
||||||
|
|
||||||
option device rtl8366s
|
|
||||||
option port 5
|
|
||||||
option led 2
|
|
@ -111,7 +111,7 @@ get_status_led() {
|
|||||||
wzr-hp-g300nh)
|
wzr-hp-g300nh)
|
||||||
status_led="buffalo:green:router"
|
status_led="buffalo:green:router"
|
||||||
;;
|
;;
|
||||||
wndr3700 | wndr3700v2 | wndr3800)
|
wndr3700)
|
||||||
status_led="wndr3700:green:power"
|
status_led="wndr3700:green:power"
|
||||||
;;
|
;;
|
||||||
wnr2000)
|
wnr2000)
|
||||||
|
@ -123,9 +123,7 @@ wrt160nl)
|
|||||||
set_led_wlan "wlan" "WLAN" "wrt160nl:blue:wlan" "phy0tpt"
|
set_led_wlan "wlan" "WLAN" "wrt160nl:blue:wlan" "phy0tpt"
|
||||||
;;
|
;;
|
||||||
|
|
||||||
wndr3700 | \
|
wndr3700)
|
||||||
wndr3700v2 | \
|
|
||||||
wndr3800)
|
|
||||||
set_led_default "wan" "WAN LED (green)" "wndr3700:green:wan" "0"
|
set_led_default "wan" "WAN LED (green)" "wndr3700:green:wan" "0"
|
||||||
set_led_usbdev "usb" "USB" "wndr3700:green:usb" "1-1"
|
set_led_usbdev "usb" "USB" "wndr3700:green:usb" "1-1"
|
||||||
;;
|
;;
|
||||||
|
@ -6,6 +6,48 @@
|
|||||||
AR71XX_BOARD_NAME=
|
AR71XX_BOARD_NAME=
|
||||||
AR71XX_MODEL=
|
AR71XX_MODEL=
|
||||||
|
|
||||||
|
ar71xx_get_mem_total() {
|
||||||
|
$(awk '/MemTotal:/ {print($2)}' /proc/meminfo)
|
||||||
|
}
|
||||||
|
|
||||||
|
ar71xx_get_mtd_part_magic() {
|
||||||
|
local part="$1"
|
||||||
|
local mtd
|
||||||
|
|
||||||
|
mtd=$(find_mtd_part $part)
|
||||||
|
[ -z "$mtd" ] && return
|
||||||
|
|
||||||
|
dd if=$mtd bs=4 count=1 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
|
||||||
|
}
|
||||||
|
|
||||||
|
wndr3700_board_detect() {
|
||||||
|
local machine="$1"
|
||||||
|
local magic
|
||||||
|
local name
|
||||||
|
|
||||||
|
name="wndr3700"
|
||||||
|
|
||||||
|
magic="$(ar71xx_get_mtd_part_magic firmware)"
|
||||||
|
case $magic in
|
||||||
|
"33373030")
|
||||||
|
machine="NETGEAR WNDR3700"
|
||||||
|
;;
|
||||||
|
"33373031")
|
||||||
|
local mt
|
||||||
|
|
||||||
|
mt=$(ar71xx_get_mem_total)
|
||||||
|
if [ "$mt" -lt "65536" ]; then
|
||||||
|
machine="NETGEAR WNDR3700v2"
|
||||||
|
else
|
||||||
|
machine="NETGEAR WNDR3800"
|
||||||
|
fi
|
||||||
|
;;
|
||||||
|
esac
|
||||||
|
|
||||||
|
AR71XX_BOARD_NAME="$name"
|
||||||
|
AR71XX_MODEL="$machine"
|
||||||
|
}
|
||||||
|
|
||||||
ar71xx_board_detect() {
|
ar71xx_board_detect() {
|
||||||
local machine
|
local machine
|
||||||
local name
|
local name
|
||||||
@ -169,14 +211,8 @@ ar71xx_board_detect() {
|
|||||||
*WP543)
|
*WP543)
|
||||||
name="wp543"
|
name="wp543"
|
||||||
;;
|
;;
|
||||||
*WNDR3700)
|
*"WNDR3700/WNDR3800")
|
||||||
name="wndr3700"
|
wndr3700_board_detect "$machine"
|
||||||
;;
|
|
||||||
*WNDR3700v2)
|
|
||||||
name="wndr3700v2"
|
|
||||||
;;
|
|
||||||
*WNDR3800)
|
|
||||||
name="wndr3800"
|
|
||||||
;;
|
;;
|
||||||
*WNR2000)
|
*WNR2000)
|
||||||
name="wnr2000"
|
name="wnr2000"
|
||||||
|
@ -127,15 +127,11 @@ platform_check_image() {
|
|||||||
return 0
|
return 0
|
||||||
;;
|
;;
|
||||||
wndr3700)
|
wndr3700)
|
||||||
[ "$magic_long" != "33373030" ] && {
|
local hw_magic
|
||||||
echo "Invalid image type."
|
|
||||||
return 1
|
hw_magic="$(ar71xx_get_mtd_part_magic firmware)"
|
||||||
}
|
[ "$magic_long" != "$hw_magic" ] && {
|
||||||
return 0
|
echo "Invalid image, hardware ID mismatch, hw:$hw_magic image:$magic_long."
|
||||||
;;
|
|
||||||
wndr3700v2|wndr3800)
|
|
||||||
[ "$magic_long" != "33373031" ] && {
|
|
||||||
echo "Invalid image type."
|
|
||||||
return 1
|
return 1
|
||||||
}
|
}
|
||||||
return 0
|
return 0
|
||||||
|
@ -49,113 +49,6 @@
|
|||||||
#define WNDR3700_CALDATA0_OFFSET 0x1000
|
#define WNDR3700_CALDATA0_OFFSET 0x1000
|
||||||
#define WNDR3700_CALDATA1_OFFSET 0x5000
|
#define WNDR3700_CALDATA1_OFFSET 0x5000
|
||||||
|
|
||||||
#ifdef CONFIG_MTD_PARTITIONS
|
|
||||||
static struct mtd_partition wndr3700_partitions[] = {
|
|
||||||
{
|
|
||||||
.name = "uboot",
|
|
||||||
.offset = 0,
|
|
||||||
.size = 0x050000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}, {
|
|
||||||
.name = "env",
|
|
||||||
.offset = 0x050000,
|
|
||||||
.size = 0x020000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}, {
|
|
||||||
.name = "rootfs",
|
|
||||||
.offset = 0x070000,
|
|
||||||
.size = 0x720000,
|
|
||||||
}, {
|
|
||||||
.name = "config",
|
|
||||||
.offset = 0x790000,
|
|
||||||
.size = 0x010000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}, {
|
|
||||||
.name = "config_bak",
|
|
||||||
.offset = 0x7a0000,
|
|
||||||
.size = 0x010000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}, {
|
|
||||||
.name = "pot",
|
|
||||||
.offset = 0x7b0000,
|
|
||||||
.size = 0x010000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}, {
|
|
||||||
.name = "traffic_meter",
|
|
||||||
.offset = 0x7c0000,
|
|
||||||
.size = 0x010000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}, {
|
|
||||||
.name = "language",
|
|
||||||
.offset = 0x7d0000,
|
|
||||||
.size = 0x020000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}, {
|
|
||||||
.name = "caldata",
|
|
||||||
.offset = 0x7f0000,
|
|
||||||
.size = 0x010000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct mtd_partition wndr3700v2_partitions[] = {
|
|
||||||
{
|
|
||||||
.name = "uboot",
|
|
||||||
.offset = 0,
|
|
||||||
.size = 0x050000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}, {
|
|
||||||
.name = "env",
|
|
||||||
.offset = 0x050000,
|
|
||||||
.size = 0x020000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}, {
|
|
||||||
.name = "rootfs",
|
|
||||||
.offset = 0x070000,
|
|
||||||
.size = 0xe40000,
|
|
||||||
}, {
|
|
||||||
.name = "config",
|
|
||||||
.offset = 0xeb0000,
|
|
||||||
.size = 0x010000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}, {
|
|
||||||
.name = "config_bak",
|
|
||||||
.offset = 0xec0000,
|
|
||||||
.size = 0x010000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}, {
|
|
||||||
.name = "pot",
|
|
||||||
.offset = 0xed0000,
|
|
||||||
.size = 0x010000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}, {
|
|
||||||
.name = "traffic_meter",
|
|
||||||
.offset = 0xee0000,
|
|
||||||
.size = 0x010000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}, {
|
|
||||||
.name = "language",
|
|
||||||
.offset = 0xef0000,
|
|
||||||
.size = 0x100000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}, {
|
|
||||||
.name = "caldata",
|
|
||||||
.offset = 0xff0000,
|
|
||||||
.size = 0x010000,
|
|
||||||
.mask_flags = MTD_WRITEABLE,
|
|
||||||
}
|
|
||||||
};
|
|
||||||
#define wndr3700_num_partitions ARRAY_SIZE(wndr3700_partitions)
|
|
||||||
#define wndr3700v2_num_partitions ARRAY_SIZE(wndr3700v2_partitions)
|
|
||||||
#else
|
|
||||||
#define wndr3700_partitions NULL
|
|
||||||
#define wndr3700_num_partitions 0
|
|
||||||
#define wndr3700v2_partitions NULL
|
|
||||||
#define wndr3700v2_num_partitions 0
|
|
||||||
#endif /* CONFIG_MTD_PARTITIONS */
|
|
||||||
|
|
||||||
static struct flash_platform_data wndr3700_flash_data;
|
|
||||||
|
|
||||||
static struct gpio_led wndr3700_leds_gpio[] __initdata = {
|
static struct gpio_led wndr3700_leds_gpio[] __initdata = {
|
||||||
{
|
{
|
||||||
.name = "wndr3700:green:power",
|
.name = "wndr3700:green:power",
|
||||||
@ -218,7 +111,7 @@ static struct platform_device wndr3700_rtl8366s_device = {
|
|||||||
}
|
}
|
||||||
};
|
};
|
||||||
|
|
||||||
static void __init wndr3700_common_setup(void)
|
static void __init wndr3700_setup(void)
|
||||||
{
|
{
|
||||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||||
|
|
||||||
@ -242,7 +135,7 @@ static void __init wndr3700_common_setup(void)
|
|||||||
|
|
||||||
ar71xx_add_device_usb();
|
ar71xx_add_device_usb();
|
||||||
|
|
||||||
ar71xx_add_device_m25p80(&wndr3700_flash_data);
|
ar71xx_add_device_m25p80(NULL);
|
||||||
|
|
||||||
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio),
|
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio),
|
||||||
wndr3700_leds_gpio);
|
wndr3700_leds_gpio);
|
||||||
@ -269,24 +162,5 @@ static void __init wndr3700_common_setup(void)
|
|||||||
art + WNDR3700_WMAC1_MAC_OFFSET);
|
art + WNDR3700_WMAC1_MAC_OFFSET);
|
||||||
}
|
}
|
||||||
|
|
||||||
static void __init wndr3700_setup(void)
|
MIPS_MACHINE(AR71XX_MACH_WNDR3700, "WNDR3700", "NETGEAR WNDR3700/WNDR3800",
|
||||||
{
|
|
||||||
wndr3700_flash_data.parts = wndr3700_partitions,
|
|
||||||
wndr3700_flash_data.nr_parts = wndr3700_num_partitions,
|
|
||||||
wndr3700_common_setup();
|
|
||||||
}
|
|
||||||
|
|
||||||
MIPS_MACHINE(AR71XX_MACH_WNDR3700, "WNDR3700", "NETGEAR WNDR3700",
|
|
||||||
wndr3700_setup);
|
wndr3700_setup);
|
||||||
|
|
||||||
static void __init wndr3700v2_setup(void)
|
|
||||||
{
|
|
||||||
wndr3700_flash_data.parts = wndr3700v2_partitions,
|
|
||||||
wndr3700_flash_data.nr_parts = wndr3700v2_num_partitions,
|
|
||||||
wndr3700_common_setup();
|
|
||||||
}
|
|
||||||
|
|
||||||
MIPS_MACHINE(AR71XX_MACH_WNDR3700V2, "WNDR3700v2", "NETGEAR WNDR3700v2",
|
|
||||||
wndr3700v2_setup);
|
|
||||||
MIPS_MACHINE(AR71XX_MACH_WNDR3800, "WNDR3800", "NETGEAR WNDR3800",
|
|
||||||
wndr3700v2_setup);
|
|
||||||
|
@ -69,9 +69,7 @@ enum ar71xx_mach_type {
|
|||||||
AR71XX_MACH_WHR_G301N, /* Buffalo WHR-G301N */
|
AR71XX_MACH_WHR_G301N, /* Buffalo WHR-G301N */
|
||||||
AR71XX_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
|
AR71XX_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
|
||||||
AR71XX_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
|
AR71XX_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
|
||||||
AR71XX_MACH_WNDR3700, /* NETGEAR WNDR3700 */
|
AR71XX_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800 */
|
||||||
AR71XX_MACH_WNDR3700V2, /* NETGEAR WNDR3700v2 */
|
|
||||||
AR71XX_MACH_WNDR3800, /* NETGEAR WNDR3800 */
|
|
||||||
AR71XX_MACH_WNR2000, /* NETGEAR WNR2000 */
|
AR71XX_MACH_WNR2000, /* NETGEAR WNR2000 */
|
||||||
AR71XX_MACH_WP543, /* Compex WP543 */
|
AR71XX_MACH_WP543, /* Compex WP543 */
|
||||||
AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */
|
AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */
|
||||||
|
@ -6,12 +6,12 @@
|
|||||||
#
|
#
|
||||||
|
|
||||||
define Profile/WNDR3700
|
define Profile/WNDR3700
|
||||||
NAME:=NETGEAR WNDR3700
|
NAME:=NETGEAR WNDR3700/3800
|
||||||
PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev
|
PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev
|
||||||
endef
|
endef
|
||||||
|
|
||||||
define Profile/WNDR3700/Description
|
define Profile/WNDR3700/Description
|
||||||
Package set optimized for the NETGEAR WNDR3700
|
Package set optimized for the NETGEAR WNDR3700/3800
|
||||||
endef
|
endef
|
||||||
|
|
||||||
$(eval $(call Profile,WNDR3700))
|
$(eval $(call Profile,WNDR3700))
|
||||||
|
@ -759,13 +759,11 @@ endef
|
|||||||
|
|
||||||
wndr3700_cmdline=board=WNDR3700 console=ttyS0,115200
|
wndr3700_cmdline=board=WNDR3700 console=ttyS0,115200
|
||||||
wndr3700_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,1024k(kernel),6656k(rootfs),64k(art)ro,7680k@0x70000(firmware)
|
wndr3700_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,1024k(kernel),6656k(rootfs),64k(art)ro,7680k@0x70000(firmware)
|
||||||
wndr3700v2_cmdline=board=WNDR3700v2 console=ttyS0,115200
|
|
||||||
wndr3700v2_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,1024k(kernel),14848k(rootfs),64k(art)ro,15872k@0x70000(firmware)
|
wndr3700v2_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,1024k(kernel),14848k(rootfs),64k(art)ro,15872k@0x70000(firmware)
|
||||||
wndr3800_cmdline=board=WNDR3800 console=ttyS0,115200
|
|
||||||
define Image/Build/Profile/WNDR3700
|
define Image/Build/Profile/WNDR3700
|
||||||
$(call Image/Build/Template/$(fs_64k)/$(1),Netgear,wndr3700,$(wndr3700_cmdline),$(wndr3700_mtdlayout),3700,WNDR3700,"" NA,)
|
$(call Image/Build/Template/$(fs_64k)/$(1),Netgear,wndr3700,$(wndr3700_cmdline),$(wndr3700_mtdlayout),3700,WNDR3700,"" NA,)
|
||||||
$(call Image/Build/Template/$(fs_64k)/$(1),Netgear,wndr3700v2,$(wndr3700v2_cmdline),$(wndr3700v2_mtdlayout),3701,WNDR3700v2,"",-H 29763654+16+64)
|
$(call Image/Build/Template/$(fs_64k)/$(1),Netgear,wndr3700v2,$(wndr3700_cmdline),$(wndr3700v2_mtdlayout),3701,WNDR3700,"",-H 29763654+16+64)
|
||||||
$(call Image/Build/Template/$(fs_64k)/$(1),Netgear,wndr3800,$(wndr3800_cmdline),$(wndr3700v2_mtdlayout),3701,WNDR3800,"",-H 29763654+16+128)
|
$(call Image/Build/Template/$(fs_64k)/$(1),Netgear,wndr3800,$(wndr3700_cmdline),$(wndr3700v2_mtdlayout),3701,WNDR3700,"",-H 29763654+16+128)
|
||||||
endef
|
endef
|
||||||
|
|
||||||
wr400n_cmdline=board=WRT400N console=ttyS0,115200
|
wr400n_cmdline=board=WRT400N console=ttyS0,115200
|
||||||
|
Loading…
Reference in New Issue
Block a user