unrelated or old

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@1440 3c298f89-4303-0410-b956-a3cf2f4a3e73

openwrt/docs/CHANGES

@@ -1,29 +0,0 @@
-
- OpenWRT CHANGES
- ---------------
-
- Changes between official and experimental
-
-  *) new buildroot (based on uClib buildroot2)
-     *) makefiles are no longer included but executed instead 
-        => easier to create packages
-
-  *) enhanced configuration system
-     *) busybox fully configurable from menuconfig
-     *) enabled tristate for some packages
-        => < > disabled, <M> compile as .ipk, <*> compile as .ipk and embed
-
-  *) new kernel (updated to 2.4.30)
-
-  *) jffs2 root partition support
-
-  *) lzma compression (kernel and squashfs root partition)
-  
-  *) newest ebtables support
-
-  *) better support for Asus WL-500g / WL-500g deluxe 
-	(kernel modules for usb,scsi,vfat build)
-  
-  *) all free kernel source added to cvs for better maintainence
-
-  *) free replacements for mtd and wl tool (wl is renamed to wlc)

openwrt/docs/README

@@ -1,18 +0,0 @@
-To build and use the buildroot stuff, do the following:
-
-1) run 'make'
-2) select which packages you wish to compile
-3) run 'make'
-4) wait while it compiles
-5) Use your shiney new root filesystem.  Depending on which sortof
-    root filesystem you selecter, you may want to loop mount it,
-    chroot into it, loop mount it and then nfs mount that on your
-    target device, burn it to flash, or whatever is appropriate
-    for your target system.
-
-You do not need to be root to build or run buildroot.  Have fun!
-
- -Erik
-
-Please feed suggestions, bug reports, insults, and bribes back to:
-	Erik Andersen <andersen@codepoet.org>