gemini: remove 2.6.37 support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31700 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/gemini/config-default

@@ -1,124 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-CONFIG_ARCH_GEMINI=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-# CONFIG_ARPD is not set
-CONFIG_ATA=m
-# CONFIG_BINARY_PRINTF is not set
-CONFIG_BITREVERSE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,19200 mem=32M"
-CONFIG_CPU_32v4=y
-CONFIG_CPU_32=y
-CONFIG_CPU_ABRT_EV4=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_FA=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FA=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_CP15=y
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_CPU_FA526=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_TLB_FA=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-# CONFIG_DM9000 is not set
-CONFIG_DMADEVICES=y
-CONFIG_DNOTIFY=y
-# CONFIG_DSCC4 is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_GEMINI_MEM_SWAP=y
-CONFIG_GEMINI_NET_ENGINE_GMAC=y
-CONFIG_GEMINI_WATCHDOG=y
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_RAW=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_LEDS_GPIO is not set
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LEGACY_PTYS=y
-# CONFIG_LIB80211 is not set
-# CONFIG_MACH_NAS4220B is not set
-# CONFIG_MACH_RUT100 is not set
-CONFIG_MACH_WBD111=y
-CONFIG_MACH_WBD222=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_GPIO=y
-# CONFIG_MG_DISK is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_NLATTR=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-# CONFIG_PCI_STUB is not set
-CONFIG_PHYLIB=y
-CONFIG_SCSI=m
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_UID16=y
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB=m
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WAN=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZONE_DMA_FLAG=0

target/linux/gemini/patches/002-register_watchdog.patch

@@ -1,30 +0,0 @@
---- a/arch/arm/mach-gemini/board-nas4220b.c
-+++ b/arch/arm/mach-gemini/board-nas4220b.c
-@@ -95,6 +95,7 @@ static void __init ib4220b_init(void)
- {
- 	gemini_gpio_init();
- 	platform_register_uart();
-+	platform_register_watchdog();
- 	platform_register_pflash(SZ_16M, NULL, 0);
- 	platform_device_register(&ib4220b_led_device);
- 	platform_device_register(&ib4220b_key_device);
---- a/arch/arm/mach-gemini/board-wbd111.c
-+++ b/arch/arm/mach-gemini/board-wbd111.c
-@@ -126,6 +126,7 @@ static void __init wbd111_init(void)
- {
- 	gemini_gpio_init();
- 	platform_register_uart();
-+	platform_register_watchdog();
- 	platform_register_pflash(SZ_8M, wbd111_partitions,
- 				 wbd111_num_partitions);
- 	platform_device_register(&wbd111_leds_device);
---- a/arch/arm/mach-gemini/board-wbd222.c
-+++ b/arch/arm/mach-gemini/board-wbd222.c
-@@ -126,6 +126,7 @@ static void __init wbd222_init(void)
- {
- 	gemini_gpio_init();
- 	platform_register_uart();
-+	platform_register_watchdog();
- 	platform_register_pflash(SZ_8M, wbd222_partitions,
- 		wbd222_num_partitions);
- 	platform_device_register(&wbd222_leds_device);

target/linux/gemini/patches/003-missing_from_upstream.patch

@@ -1,86 +0,0 @@
---- a/arch/arm/mach-gemini/board-wbd111.c
-+++ b/arch/arm/mach-gemini/board-wbd111.c
-@@ -22,9 +22,29 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/time.h>
- 
-+#include <mach/gmac.h>
- 
- #include "common.h"
- 
-+static struct mdio_gpio_platform_data wbd111_mdio = {
-+	.mdc		= 22,
-+	.mdio		= 21,
-+	.phy_mask	= ~(1 << 1),
-+};
-+
-+static struct platform_device wbd111_phy_device = {
-+	.name	= "mdio-gpio",
-+	.id	= 0,
-+	.dev	= {
-+		.platform_data = &wbd111_mdio,
-+	},
-+};
-+
-+static struct gemini_gmac_platform_data gmac_data = {
-+	.bus_id[0] = "0:01",
-+	.interface[0] = PHY_INTERFACE_MODE_MII,
-+};
-+
- static struct gpio_keys_button wbd111_keys[] = {
- 	{
- 		.code		= KEY_SETUP,
-@@ -131,6 +151,8 @@ static void __init wbd111_init(void)
- 				 wbd111_num_partitions);
- 	platform_device_register(&wbd111_leds_device);
- 	platform_device_register(&wbd111_keys_device);
-+	platform_device_register(&wbd111_phy_device);
-+	platform_register_ethernet(&gmac_data);
- }
- 
- MACHINE_START(WBD111, "Wiliboard WBD-111")
---- a/arch/arm/mach-gemini/board-wbd222.c
-+++ b/arch/arm/mach-gemini/board-wbd222.c
-@@ -22,9 +22,31 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/time.h>
- 
-+#include <mach/gmac.h>
- 
- #include "common.h"
- 
-+static struct mdio_gpio_platform_data wbd222_mdio = {
-+	.mdc		= 22,
-+	.mdio		= 21,
-+	.phy_mask	= ~((1 << 1) | (1 << 3)),
-+};
-+
-+static struct platform_device wbd222_phy_device = {
-+	.name	= "mdio-gpio",
-+	.id	= 0,
-+	.dev	= {
-+		.platform_data = &wbd222_mdio,
-+	},
-+};
-+
-+static struct gemini_gmac_platform_data gmac_data = {
-+	.bus_id[0] = "0:01",
-+	.interface[0] = PHY_INTERFACE_MODE_MII,
-+	.bus_id[1] = "0:03",
-+        .interface[1] = PHY_INTERFACE_MODE_MII,
-+};
-+
- static struct gpio_keys_button wbd222_keys[] = {
- 	{
- 		.code		= KEY_SETUP,
-@@ -131,6 +153,10 @@ static void __init wbd222_init(void)
- 		wbd222_num_partitions);
- 	platform_device_register(&wbd222_leds_device);
- 	platform_device_register(&wbd222_keys_device);
-+	platform_device_register(&wbd222_phy_device);
-+	platform_register_ethernet(&gmac_data);
-+	platform_register_usb(0);
-+	platform_register_usb(1);
- }
- 
- MACHINE_START(WBD222, "Wiliboard WBD-222")

target/linux/gemini/patches/004-gemini-disable-watchdog-in-probe.patch

@@ -1,24 +0,0 @@
---- a/drivers/watchdog/gemini_wdt.c
-+++ b/drivers/watchdog/gemini_wdt.c
-@@ -224,6 +224,7 @@ static int __init gemini_wdt_probe(struc
- 	struct resource *res;
- 	void __iomem *base;
- 	struct gemini_wdt_struct *gemini_wdt;
-+	unsigned int reg;
- 
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	if (!res) {
-@@ -267,6 +268,13 @@ static int __init gemini_wdt_probe(struc
- 
- 	gemini_wdt_miscdev.parent = &pdev->dev;
- 
-+	reg = __raw_readw(gemini_wdt->base + GEMINI_WDCR);
-+	if (reg & WDCR_ENABLE) {
-+		/* Watchdog was enabled by the bootloader, disable it. */
-+		reg &= ~(WDCR_ENABLE);
-+		__raw_writel(reg, gemini_wdt->base + GEMINI_WDCR);
-+	}
-+
- 	ret = misc_register(&gemini_wdt_miscdev);
- 	if (ret)
- 		goto fail2;

target/linux/gemini/patches/005-gemini-add-missing-skbuff-include.patch

@@ -1,39 +0,0 @@
---- a/arch/arm/mach-gemini/devices.c
-+++ b/arch/arm/mach-gemini/devices.c
-@@ -13,6 +13,7 @@
- #include <linux/platform_device.h>
- #include <linux/serial_8250.h>
- #include <linux/mtd/physmap.h>
-+#include <linux/skbuff.h>
- 
- #include <mach/irqs.h>
- #include <mach/hardware.h>
-@@ -147,7 +148,7 @@ int platform_register_ethernet(struct ge
- 	if (pdata->bus_id[1])
- 		reg |= GMAC_1_ENABLE;
- 	else if (pdata->interface[0] == PHY_INTERFACE_MODE_GMII)
--		reg |= GMAC_GMII;		
-+		reg |= GMAC_GMII;
- 
- 	__raw_writel(reg, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
- 
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -18,6 +18,7 @@
-  */
- 
- #include <linux/module.h>
-+#include <linux/skbuff.h>
- #include <linux/mdio-bitbang.h>
- #include <linux/types.h>
- #include <linux/delay.h>
---- a/drivers/net/phy/mdio-gpio.c
-+++ b/drivers/net/phy/mdio-gpio.c
-@@ -25,6 +25,7 @@
- #include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/platform_device.h>
-+#include <linux/skbuff.h>
- #include <linux/gpio.h>
- #include <linux/mdio-gpio.h>
- 

target/linux/gemini/patches/006-wbd111_usb.patch

@@ -1,21 +0,0 @@
---- a/arch/arm/mach-gemini/board-wbd111.c
-+++ b/arch/arm/mach-gemini/board-wbd111.c
-@@ -147,6 +147,7 @@ static void __init wbd111_init(void)
- 	gemini_gpio_init();
- 	platform_register_uart();
- 	platform_register_watchdog();
-+	platform_register_usb(0);
- 	platform_register_pflash(SZ_8M, wbd111_partitions,
- 				 wbd111_num_partitions);
- 	platform_device_register(&wbd111_leds_device);
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -103,7 +103,7 @@ module_param (park, uint, S_IRUGO);
- MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
- 
- /* for flakey hardware, ignore overcurrent indicators */
--static int ignore_oc = 0;
-+static int ignore_oc = 1;
- module_param (ignore_oc, bool, S_IRUGO);
- MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
- 

target/linux/gemini/patches/100-mtd-physmap-try-static-partitions-first.patch

@@ -1,30 +0,0 @@
---- a/drivers/mtd/maps/physmap.c
-+++ b/drivers/mtd/maps/physmap.c
-@@ -173,6 +173,13 @@ static int physmap_flash_probe(struct pl
- 		goto err_out;
- 
- #ifdef CONFIG_MTD_PARTITIONS
-+	if (physmap_data->nr_parts) {
-+		printk(KERN_NOTICE "Using physmap partition information\n");
-+		add_mtd_partitions(info->cmtd, physmap_data->parts,
-+				   physmap_data->nr_parts);
-+		return 0;
-+	}
-+
- 	err = parse_mtd_partitions(info->cmtd, part_probe_types,
- 				&info->parts, 0);
- 	if (err > 0) {
-@@ -180,13 +187,6 @@ static int physmap_flash_probe(struct pl
- 		info->nr_parts = err;
- 		return 0;
- 	}
--
--	if (physmap_data->nr_parts) {
--		printk(KERN_NOTICE "Using physmap partition information\n");
--		add_mtd_partitions(info->cmtd, physmap_data->parts,
--				   physmap_data->nr_parts);
--		return 0;
--	}
- #endif
- 
- 	add_mtd_device(info->cmtd);

target/linux/gemini/patches/110-disable_hw_chksum_and_sg.patch

@@ -1,11 +0,0 @@
---- a/drivers/net/gemini_negmac/gm_gmac.c
-+++ b/drivers/net/gemini_negmac/gm_gmac.c
-@@ -42,7 +42,7 @@
- #include "gm_gmac.h"
- 
- /* #define GMAX_TX_INTR_DISABLED */
--#define DO_HW_CHKSUM
-+/* #define DO_HW_CHKSUM */
- /* #define ENABLE_TSO */
- #define GMAC_USE_TXQ0
- /* #define GMAC_LEN_1_2_ISSUE */