[rdc] use Alain Knaff's bzip2/lzma patch instead of the old lzma patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14890 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/rdc/config-2.6.27

@@ -10,6 +10,7 @@ CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
 CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
@@ -22,18 +23,11 @@ CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_ATA is not set
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_AUDIT_ARCH is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_BITREVERSE=y
-# CONFIG_BLK_DEV_IDE is not set
-# CONFIG_BLK_DEV_IDEDISK is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
 CONFIG_BOUNCE=y
-# CONFIG_BROADCOM_PHY is not set
 CONFIG_CLASSIC_RCU=y
 CONFIG_CLOCKSOURCE_WATCHDOG=y
 # CONFIG_COMPAT_VDSO is not set
@@ -41,7 +35,6 @@ CONFIG_CLOCKSOURCE_WATCHDOG=y
 # CONFIG_CPU_FREQ is not set
 # CONFIG_CPU_IDLE is not set
 # CONFIG_CRYPTO_AES_586 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_SALSA20_586 is not set
 # CONFIG_CRYPTO_TWOFISH_586 is not set
 # CONFIG_CS5535_GPIO is not set
@@ -64,7 +57,6 @@ CONFIG_FAST_CMPXCHG_LOCAL=y
 CONFIG_FIRMWARE_MEMMAP=y
 # CONFIG_FIXED_PHY is not set
 CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_POSIX_ACL=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -100,8 +92,6 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-# CONFIG_HID is not set
-CONFIG_HID_SUPPORT=y
 # CONFIG_HIGHMEM4G is not set
 # CONFIG_HIGHMEM64G is not set
 # CONFIG_HIGH_RES_TIMERS is not set
@@ -118,20 +108,13 @@ CONFIG_HZ=250
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_I2C is not set
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I6300ESB_WDT is not set
 # CONFIG_I8K is not set
 # CONFIG_IB700_WDT is not set
 # CONFIG_IBMASR is not set
-# CONFIG_IBM_ASM is not set
 CONFIG_ICPLUS_PHY=y
 # CONFIG_IDE is not set
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_PROC_FS is not set
 CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_INPUT is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_YEALINK is not set
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_IOSCHED_CFQ=y
 # CONFIG_IOSCHED_DEADLINE is not set
@@ -148,7 +131,9 @@ CONFIG_ISA_DMA_API=y
 # CONFIG_ISCSI_IBFT_FIND is not set
 # CONFIG_IT8712F_WDT is not set
 # CONFIG_ITCO_WDT is not set
-# CONFIG_JFS_FS is not set
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_GZIP is not set
+CONFIG_KERNEL_LZMA=y
 CONFIG_KEXEC=y
 CONFIG_KMOD=y
 CONFIG_KTIME_SCALAR=y
@@ -170,16 +155,6 @@ CONFIG_MATH_EMULATION=y
 # CONFIG_MCORE2 is not set
 # CONFIG_MCRUSOE is not set
 # CONFIG_MCYRIXIII is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_MEDIA_TUNER is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
 # CONFIG_MEFFICEON is not set
 # CONFIG_MEMTEST is not set
 # CONFIG_MFD_CORE is not set
@@ -250,7 +225,6 @@ CONFIG_MTD_RDC3210_SIZE=0x400000
 # CONFIG_MWINCHIP3D is not set
 # CONFIG_MWINCHIPC6 is not set
 # CONFIG_NATSEMI is not set
-# CONFIG_NLS_ISO8859_2 is not set
 CONFIG_NOHIGHMEM=y
 # CONFIG_NSC_GPIO is not set
 CONFIG_NVRAM=y
@@ -261,8 +235,6 @@ CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PARAVIRT_GUEST is not set
 # CONFIG_PC8736x_GPIO is not set
 # CONFIG_PC87413_WDT is not set
-# CONFIG_PCCARD is not set
-# CONFIG_PCCARD_NONSTATIC is not set
 CONFIG_PCI=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_PCI_BIOS=y
@@ -273,18 +245,17 @@ CONFIG_PCI_GOANY=y
 # CONFIG_PCI_GODIRECT is not set
 # CONFIG_PCI_GOMMCONFIG is not set
 # CONFIG_PCI_GOOLPC is not set
-# CONFIG_PCMCIA is not set
 # CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_PHYLIB=y
 CONFIG_PHYSICAL_ALIGN=0x100000
 CONFIG_PHYSICAL_START=0x100000
 # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_QSEMI_PHY is not set
 # CONFIG_R6040 is not set
 CONFIG_RDC321X_WDT=y
-# CONFIG_REALTEK_PHY is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_GZIP=y
+# CONFIG_RD_LZMA is not set
 # CONFIG_RELOCATABLE is not set
-CONFIG_RFKILL_LEDS=y
 # CONFIG_RTC is not set
 # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -295,16 +266,12 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 # CONFIG_SC520_WDT is not set
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_WAIT_SCAN is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCx200 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_SERIAL_8250_EXTENDED is not set
 # CONFIG_SMP is not set
 # CONFIG_SMSC37B787_WDT is not set
-# CONFIG_SMSC_PHY is not set
 # CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SONYPI is not set
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SSB_POSSIBLE=y
@@ -312,27 +279,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SYSPROF_TRACER is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TELCLOCK is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_TOSHIBA is not set
 CONFIG_UID16=y
-# CONFIG_USB is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
 CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_V4L_USB_DRIVERS=y
 # CONFIG_VGASTATE is not set
 # CONFIG_VIA_RHINE is not set
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_MEDIA is not set
-# CONFIG_VIDEO_V4L2 is not set
-# CONFIG_VIDEO_V4L2_COMMON is not set
 # CONFIG_VIRTIO_BALLOON is not set
 # CONFIG_VIRTIO_PCI is not set
 CONFIG_VIRTUALIZATION=y

target/linux/rdc/patches-2.6.27/600-x86_lzma.patch

@@ -1,63 +0,0 @@
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -172,4 +172,9 @@
- quiet_cmd_gzip = GZIP    $@
- cmd_gzip = gzip -f -9 < $< > $@
- 
--
-+# LZMA
-+#
-+quiet_cmd_lzma = LZMA $@
-+cmd_lzma = bash -e scripts/lzma_kern $< $@ -lc7 -lp0 -pb0
-+# to use lzmacomp,
-+# cmd_lzma = lzmacomp $< 700 > $@
---- /dev/null
-+++ b/scripts/lzma_kern
-@@ -0,0 +1,4 @@
-+get-size() { echo "$5" ;}
-+printf -v len '%.8x' "$(get-size $(ls -l "$1"))"
-+lzma e "$@"
-+echo -ne "\x$(echo $len | cut -c 7,8)\x$(echo $len | cut -c 5,6)\x$(echo $len | cut -c 3,4)\x$(echo $len | cut -c 1,2)" >> "$2"
---- a/arch/x86/boot/compressed/Makefile
-+++ b/arch/x86/boot/compressed/Makefile
-@@ -4,7 +4,7 @@
- # create a compressed vmlinux image from the original vmlinux
- #
- 
--targets := vmlinux vmlinux.bin vmlinux.bin.gz head_$(BITS).o misc.o piggy.o
-+targets := vmlinux vmlinux.bin vmlinux.bin.lzma head_$(BITS).o lzma_misc.o piggy.o
- 
- KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
- KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
-@@ -18,7 +18,7 @@
- LDFLAGS := -m elf_$(UTS_MACHINE)
- LDFLAGS_vmlinux := -T
- 
--$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
-+$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/lzma_misc.o $(obj)/piggy.o FORCE
- 	$(call if_changed,ld)
- 	@:
- 
-@@ -44,11 +44,11 @@
- 	$(call if_changed,relocbin)
- 
- ifdef CONFIG_RELOCATABLE
--$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
--	$(call if_changed,gzip)
-+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
-+	$(call if_changed,lzma)
- else
--$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
--	$(call if_changed,gzip)
-+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
-+	$(call if_changed,lzma)
- endif
- LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
- 
-@@ -60,5 +60,5 @@
- endif
- 
- 
--$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.lzma FORCE
- 	$(call if_changed,ld)