qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 23:35:32 +02:00
Code

add support for the GPIO expander used on the Cambria based on patches from Chris

Browse Source 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14244 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
kaloz 2009-01-28 15:26:13 +00:00
parent 7f03bb7362
commit 5dde57a1d7
2 changed files with 527 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

420
target/linux/ixp4xx/patches-2.6.28/020-gateworks_i2c_pld.patch Normal file
View File

@ -0,0 +1,420 @@
--- /dev/null
+++ b/drivers/gpio/gw_i2c_pld.c
@@ -0,0 +1,370 @@
+/*
+ * Gateworks I2C PLD GPIO expander
+ *
+ * Copyright (C) 2009 Gateworks Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c/gw_i2c_pld.h>
+#include <asm/gpio.h>
+
+static const struct i2c_device_id gw_i2c_pld_id[] = {
+ { "gw_i2c_pld", 8 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, gw_i2c_pld_id);
+
+/*
+ * The Gateworks I2C PLD chip only expose one read and one
+ * write register. Writing a "one" bit (to match the reset state) lets
+ * that pin be used as an input. It is an open-drain model.
+ */
+
+struct gw_i2c_pld {
+ struct gpio_chip chip;
+ struct i2c_client *client;
+ unsigned out; /* software latch */
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * The Gateworks I2C PLD chip does not properly send the acknowledge bit
+ * thus we cannot use standard i2c_smbus functions. We have recreated
+ * our own here, but we still use the mutex_lock to lock the i2c_bus
+ * as the device still exists on the I2C bus.
+*/
+
+#define PLD_SCL_GPIO 6
+#define PLD_SDA_GPIO 7
+
+#define SCL_LO() gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_LOW)
+#define SCL_HI() gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_HIGH)
+#define SCL_EN() gpio_line_config(PLD_SCL_GPIO, IXP4XX_GPIO_OUT)
+#define SDA_LO() gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_LOW)
+#define SDA_HI() gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_HIGH)
+#define SDA_EN() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_OUT)
+#define SDA_DIS() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_IN)
+#define SDA_IN(x) gpio_line_get(PLD_SDA_GPIO, &x);
+
+static int i2c_pld_write_byte(int address, int byte)
+{
+ int i;
+
+ address = (address << 1) & ~0x1;
+
+ SDA_HI();
+ SDA_EN();
+ SCL_EN();
+ SCL_HI();
+ SDA_LO();
+ SCL_LO();
+
+ for (i = 7; i >= 0; i--)
+ {
+ if (address & (1 << i))
+ SDA_HI();
+ else
+ SDA_LO();
+
+ SCL_HI();
+ SCL_LO();
+ }
+
+ SDA_DIS();
+ SCL_HI();
+ SDA_IN(i);
+ SCL_LO();
+ SDA_EN();
+
+ for (i = 7; i >= 0; i--)
+ {
+ if (byte & (1 << i))
+ SDA_HI();
+ else
+ SDA_LO();
+ SCL_HI();
+ SCL_LO();
+ }
+
+ SDA_DIS();
+ SCL_HI();
+ SDA_IN(i);
+ SCL_LO();
+
+ SDA_HI();
+ SDA_EN();
+
+ SDA_LO();
+ SCL_HI();
+ SDA_HI();
+ SCL_LO();
+ SCL_HI();
+
+ return 0;
+}
+
+static unsigned int i2c_pld_read_byte(int address)
+{
+ int i = 0, byte = 0;
+ int bit;
+
+ address = (address << 1) | 0x1;
+
+ SDA_HI();
+ SDA_EN();
+ SCL_EN();
+ SCL_HI();
+ SDA_LO();
+ SCL_LO();
+
+ for (i = 7; i >= 0; i--)
+ {
+ if (address & (1 << i))
+ SDA_HI();
+ else
+ SDA_LO();
+
+ SCL_HI();
+ SCL_LO();
+ }
+
+ SDA_DIS();
+ SCL_HI();
+ SDA_IN(i);
+ SCL_LO();
+ SDA_EN();
+
+ SDA_DIS();
+ for (i = 7; i >= 0; i--)
+ {
+ SCL_HI();
+ SDA_IN(bit);
+ byte |= bit << i;
+ SCL_LO();
+ }
+
+ SDA_LO();
+ SCL_HI();
+ SDA_HI();
+ SCL_LO();
+ SCL_HI();
+
+ return byte;
+}
+
+
+static int gw_i2c_pld_input8(struct gpio_chip *chip, unsigned offset)
+{
+ int ret;
+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
+ struct i2c_adapter *adap = gpio->client->adapter;
+
+ if (in_atomic() || irqs_disabled()) {
+ ret = mutex_trylock(&adap->bus_lock);
+ if (!ret)
+ /* I2C activity is ongoing. */
+ return -EAGAIN;
+ } else {
+ mutex_lock_nested(&adap->bus_lock, adap->level);
+ }
+
+ gpio->out |= (1 << offset);
+
+ ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
+
+ mutex_unlock(&adap->bus_lock);
+
+ return ret;
+}
+
+static int gw_i2c_pld_get8(struct gpio_chip *chip, unsigned offset)
+{
+ int ret;
+ s32 value;
+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
+ struct i2c_adapter *adap = gpio->client->adapter;
+
+ if (in_atomic() || irqs_disabled()) {
+ ret = mutex_trylock(&adap->bus_lock);
+ if (!ret)
+ /* I2C activity is ongoing. */
+ return -EAGAIN;
+ } else {
+ mutex_lock_nested(&adap->bus_lock, adap->level);
+ }
+
+ value = i2c_pld_read_byte(gpio->client->addr);
+
+ mutex_unlock(&adap->bus_lock);
+
+ return (value < 0) ? 0 : (value & (1 << offset));
+}
+
+static int gw_i2c_pld_output8(struct gpio_chip *chip, unsigned offset, int value)
+{
+ int ret;
+
+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
+ struct i2c_adapter *adap = gpio->client->adapter;
+
+ unsigned bit = 1 << offset;
+
+ if (in_atomic() || irqs_disabled()) {
+ ret = mutex_trylock(&adap->bus_lock);
+ if (!ret)
+ /* I2C activity is ongoing. */
+ return -EAGAIN;
+ } else {
+ mutex_lock_nested(&adap->bus_lock, adap->level);
+ }
+
+
+ if (value)
+ gpio->out |= bit;
+ else
+ gpio->out &= ~bit;
+
+ ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
+
+ mutex_unlock(&adap->bus_lock);
+
+ return ret;
+}
+
+static void gw_i2c_pld_set8(struct gpio_chip *chip, unsigned offset, int value)
+{
+ gw_i2c_pld_output8(chip, offset, value);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int gw_i2c_pld_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct gw_i2c_pld_platform_data *pdata;
+ struct gw_i2c_pld *gpio;
+ int status;
+
+ pdata = client->dev.platform_data;
+ if (!pdata)
+ return -ENODEV;
+
+ /* Allocate, initialize, and register this gpio_chip. */
+ gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
+ if (!gpio)
+ return -ENOMEM;
+
+ gpio->chip.base = pdata->gpio_base;
+ gpio->chip.can_sleep = 1;
+ gpio->chip.dev = &client->dev;
+ gpio->chip.owner = THIS_MODULE;
+
+ gpio->chip.ngpio = pdata->nr_gpio;
+ gpio->chip.direction_input = gw_i2c_pld_input8;
+ gpio->chip.get = gw_i2c_pld_get8;
+ gpio->chip.direction_output = gw_i2c_pld_output8;
+ gpio->chip.set = gw_i2c_pld_set8;
+
+ gpio->chip.label = client->name;
+
+ gpio->client = client;
+ i2c_set_clientdata(client, gpio);
+
+ gpio->out = 0xFF;
+
+ status = gpiochip_add(&gpio->chip);
+ if (status < 0)
+ goto fail;
+
+ dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
+ gpio->chip.base,
+ gpio->chip.base + gpio->chip.ngpio - 1,
+ client->name,
+ client->irq ? " (irq ignored)" : "");
+
+ /* Let platform code set up the GPIOs and their users.
+ * Now is the first time anyone could use them.
+ */
+ if (pdata->setup) {
+ status = pdata->setup(client,
+ gpio->chip.base, gpio->chip.ngpio,
+ pdata->context);
+ if (status < 0)
+ dev_warn(&client->dev, "setup --> %d\n", status);
+ }
+
+ return 0;
+
+fail:
+ dev_dbg(&client->dev, "probe error %d for '%s'\n",
+ status, client->name);
+ kfree(gpio);
+ return status;
+}
+
+static int gw_i2c_pld_remove(struct i2c_client *client)
+{
+ struct gw_i2c_pld_platform_data *pdata = client->dev.platform_data;
+ struct gw_i2c_pld *gpio = i2c_get_clientdata(client);
+ int status = 0;
+
+ if (pdata->teardown) {
+ status = pdata->teardown(client,
+ gpio->chip.base, gpio->chip.ngpio,
+ pdata->context);
+ if (status < 0) {
+ dev_err(&client->dev, "%s --> %d\n",
+ "teardown", status);
+ return status;
+ }
+ }
+
+ status = gpiochip_remove(&gpio->chip);
+ if (status == 0)
+ kfree(gpio);
+ else
+ dev_err(&client->dev, "%s --> %d\n", "remove", status);
+ return status;
+}
+
+static struct i2c_driver gw_i2c_pld_driver = {
+ .driver = {
+ .name = "gw_i2c_pld",
+ .owner = THIS_MODULE,
+ },
+ .probe = gw_i2c_pld_probe,
+ .remove = gw_i2c_pld_remove,
+ .id_table = gw_i2c_pld_id,
+};
+
+static int __init gw_i2c_pld_init(void)
+{
+ return i2c_add_driver(&gw_i2c_pld_driver);
+}
+module_init(gw_i2c_pld_init);
+
+static void __exit gw_i2c_pld_exit(void)
+{
+ i2c_del_driver(&gw_i2c_pld_driver);
+}
+module_exit(gw_i2c_pld_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Chris Lang");
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -160,6 +160,14 @@ config GPIO_BT8XX
If unsure, say N.
+config GPIO_GW_I2C_PLD
+ tristate "Gateworks I2C PLD GPIO Expander"
+ depends on I2C
+ help
+ Say yes here to provide access to the Gateworks I2C PLD GPIO
+ Expander. This is used at least on the GW2358-4.
+
+
comment "SPI GPIO expanders:"
config GPIO_MAX7301
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o
obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
+obj-$(CONFIG_GPIO_GW_I2C_PLD) += gw_i2c_pld.o
--- /dev/null
+++ b/include/linux/i2c/gw_i2c_pld.h
@@ -0,0 +1,20 @@
+#ifndef __LINUX_GW_I2C_PLD_H
+#define __LINUX_GW_I2C_PLD_H
+
+/**
+ * The Gateworks I2C PLD Implements an additional 8 bits of GPIO through the PLD
+ */
+
+struct gw_i2c_pld_platform_data {
+ unsigned gpio_base;
+ unsigned nr_gpio;
+ int (*setup)(struct i2c_client *client,
+ int gpio, unsigned ngpio,
+ void *context);
+ int (*teardown)(struct i2c_client *client,
+ int gpio, unsigned ngpio,
+ void *context);
+ void *context;
+};
+
+#endif /* __LINUX_GW_I2C_PLD_H */

107
target/linux/ixp4xx/patches-2.6.28/193-cambria_pld_gpio.patch Normal file
View File

@ -0,0 +1,107 @@
--- a/arch/arm/mach-ixp4xx/cambria-setup.c
+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
@@ -12,11 +12,14 @@
*/
#include <linux/device.h>
+#include <linux/gpio_buttons.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/i2c/at24.h>
+#include <linux/i2c/gw_i2c_pld.h>
#include <linux/if_ether.h>
#include <linux/init.h>
+#include <linux/input.h>
#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/memory.h>
@@ -323,6 +326,39 @@ static struct platform_device cambria_us
},
};
+static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
+ .gpio_base = 16,
+ .nr_gpio = 8,
+};
+
+static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
+ .gpio_base = 24,
+ .nr_gpio = 2,
+};
+
+
+static struct gpio_button cambria_gpio_buttons[] = {
+ {
+ .desc = "user",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 2,
+ .gpio = 25,
+ }
+};
+
+static struct gpio_buttons_platform_data cambria_gpio_buttons_data = {
+ .poll_interval = 500,
+ .nbuttons = 1,
+ .buttons = cambria_gpio_buttons,
+};
+
+static struct platform_device cambria_gpio_buttons_device = {
+ .name = "gpio-buttons",
+ .id = -1,
+ .dev.platform_data = &cambria_gpio_buttons_data,
+};
+
static struct platform_device *cambria_devices[] __initdata = {
&cambria_i2c_gpio,
&cambria_flash,
@@ -331,6 +367,11 @@ static struct platform_device *cambria_d
static void __init cambria_gw23xx_setup(void)
{
+ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
+ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
+
+ platform_device_register(&cambria_gpio);
platform_device_register(&cambria_npec_device);
platform_device_register(&cambria_npea_device);
}
@@ -377,7 +418,8 @@ static void __init cambria_gw2358_setup(
cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff);
cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
- cambria_gpio_resources[0].start = (1 << 14);
+ cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
+ (1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
platform_device_register(&cambria_gpio);
@@ -391,7 +433,12 @@ static void __init cambria_gw2358_setup(
platform_device_register(&cambria_pata);
+ cambria_gpio_leds[0].gpio = 24;
+ platform_device_register(&cambria_gpio_leds_device);
+
platform_device_register(&cambria_latch_leds_device);
+
+ platform_device_register(&cambria_gpio_buttons_device);
}
static struct cambria_board_info cambria_boards[] __initdata = {
@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata
I2C_BOARD_INFO("24c08", 0x51),
.platform_data = &cambria_eeprom_info
},
+ {
+ I2C_BOARD_INFO("gw_i2c_pld", 0x56),
+ .platform_data = &gw_i2c_pld_data0,
+ },
+ {
+ I2C_BOARD_INFO("gw_i2c_pld", 0x57),
+ .platform_data = &gw_i2c_pld_data1,
+ },
};
static void __init cambria_init(void)