qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-23 19:44:05 +02:00
Code

kernel: update linux 3.6 to 3.6.8

Browse Source 
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34402 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg 2012-11-29 07:42:19 +00:00
parent 75e60a0422
commit 7617db12cb
12 changed files with 42 additions and 42 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
include/kernel-version.mk
View File

@ -5,8 +5,8 @@ LINUX_RELEASE?=1
ifeq ($(LINUX_VERSION),3.3.8)
LINUX_KERNEL_MD5SUM:=f1058f64eed085deb44f10cee8541d50
endif
ifeq ($(LINUX_VERSION),3.6.7)
LINUX_KERNEL_MD5SUM:=089209f655c8811db20d8b6ff37a8093
ifeq ($(LINUX_VERSION),3.6.8)
LINUX_KERNEL_MD5SUM:=e3405cc8f9e4f18c516e55a8eb625803
endif
# disable the md5sum check for unknown kernel versions

2
target/linux/ar71xx/patches-3.6/a05-ar934x_nfc-add-buffer-verification.patch
View File

@ -19,7 +19,7 @@
static void
ar934x_nfc_hw_init(struct ar934x_nfc *nfc)
{
@@ -1048,6 +1060,7 @@ ar934x_nfc_probe(struct platform_device
@@ -1047,6 +1059,7 @@ ar934x_nfc_probe(struct platform_device
nand->read_byte = ar934x_nfc_read_byte;
nand->write_buf = ar934x_nfc_write_buf;
nand->read_buf = ar934x_nfc_read_buf;

58
target/linux/brcm47xx/patches-3.6/700-ssb-gigabit-ethernet-driver.patch
View File

@ -5,10 +5,10 @@
#include <linux/dma-mapping.h>
#include <linux/firmware.h>
+#include <linux/ssb/ssb_driver_gige.h>
#if IS_ENABLED(CONFIG_HWMON)
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
@@ -253,6 +254,7 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_t
@@ -251,6 +252,7 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_t
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5705F)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5721)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5722)},
@ -16,7 +16,7 @@
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751M)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751F)},
@@ -535,7 +537,9 @@ static void _tw32_flush(struct tg3 *tp,
@@ -533,7 +535,9 @@ static void _tw32_flush(struct tg3 *tp,
static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
{
tp->write32_mbox(tp, off, val);
@ -27,7 +27,7 @@
tp->read32_mbox(tp, off);
}
@@ -545,7 +549,8 @@ static void tg3_write32_tx_mbox(struct t
@@ -543,7 +547,8 @@ static void tg3_write32_tx_mbox(struct t
writel(val, mbox);
if (tg3_flag(tp, TXD_MBOX_HWBUG))
writel(val, mbox);
@ -37,7 +37,7 @@
readl(mbox);
}
@@ -1052,7 +1057,8 @@ static void tg3_switch_clocks(struct tg3
@@ -1050,7 +1055,8 @@ static void tg3_switch_clocks(struct tg3
#define PHY_BUSY_LOOPS 5000
@ -47,7 +47,7 @@
{
u32 frame_val;
unsigned int loops;
@@ -1068,7 +1074,7 @@ static int tg3_readphy(struct tg3 *tp, i
@@ -1066,7 +1072,7 @@ static int tg3_readphy(struct tg3 *tp, i
*val = 0x0;
@ -56,7 +56,7 @@
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -1105,7 +1111,13 @@ static int tg3_readphy(struct tg3 *tp, i
@@ -1103,7 +1109,13 @@ static int tg3_readphy(struct tg3 *tp, i
return ret;
}
@ -71,7 +71,7 @@
{
u32 frame_val;
unsigned int loops;
@@ -1123,7 +1135,7 @@ static int tg3_writephy(struct tg3 *tp,
@@ -1121,7 +1133,7 @@ static int tg3_writephy(struct tg3 *tp,
tg3_ape_lock(tp, tp->phy_ape_lock);
@ -80,7 +80,7 @@
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -1158,6 +1170,11 @@ static int tg3_writephy(struct tg3 *tp,
@@ -1156,6 +1168,11 @@ static int tg3_writephy(struct tg3 *tp,
return ret;
}
@ -92,7 +92,7 @@
static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val)
{
int err;
@@ -1730,6 +1747,11 @@ static int tg3_poll_fw(struct tg3 *tp)
@@ -1728,6 +1745,11 @@ static int tg3_poll_fw(struct tg3 *tp)
int i;
u32 val;
@ -104,7 +104,7 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
/* Wait up to 20ms for init done. */
for (i = 0; i < 200; i++) {
@@ -3312,6 +3334,8 @@ static int tg3_nvram_write_block(struct
@@ -3310,6 +3332,8 @@ static int tg3_nvram_write_block(struct
{
int ret;
@ -113,7 +113,7 @@
if (tg3_flag(tp, EEPROM_WRITE_PROT)) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
~GRC_LCLCTRL_GPIO_OUTPUT1);
@@ -3387,6 +3411,11 @@ static int tg3_halt_cpu(struct tg3 *tp,
@@ -3385,6 +3409,11 @@ static int tg3_halt_cpu(struct tg3 *tp,
tw32_f(offset + CPU_MODE, CPU_MODE_HALT);
udelay(10);
} else {
@ -125,7 +125,7 @@
for (i = 0; i < 10000; i++) {
tw32(offset + CPU_STATE, 0xffffffff);
tw32(offset + CPU_MODE, CPU_MODE_HALT);
@@ -3401,9 +3430,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
@@ -3399,9 +3428,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
return -ENODEV;
}
@ -141,7 +141,7 @@
return 0;
}
@@ -3466,6 +3498,11 @@ static int tg3_load_5701_a0_firmware_fix
@@ -3464,6 +3496,11 @@ static int tg3_load_5701_a0_firmware_fix
const __be32 *fw_data;
int err, i;
@ -153,7 +153,7 @@
fw_data = (void *)tp->fw->data;
/* Firmware blob starts with version numbers, followed by
@@ -3522,6 +3559,11 @@ static int tg3_load_tso_firmware(struct
@@ -3520,6 +3557,11 @@ static int tg3_load_tso_firmware(struct
unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
int err, i;
@ -165,7 +165,7 @@
if (tg3_flag(tp, HW_TSO_1) ||
tg3_flag(tp, HW_TSO_2) ||
tg3_flag(tp, HW_TSO_3))
@@ -3862,8 +3904,9 @@ static int tg3_power_down_prepare(struct
@@ -3860,8 +3902,9 @@ static int tg3_power_down_prepare(struct
tg3_frob_aux_power(tp, true);
/* Workaround for unstable PLL clock */
@ -177,7 +177,7 @@
u32 val = tr32(0x7d00);
val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
@@ -4365,6 +4408,14 @@ relink:
@@ -4363,6 +4406,14 @@ relink:
if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
tg3_phy_copper_begin(tp);
@ -192,7 +192,7 @@
tg3_readphy(tp, MII_BMSR, &bmsr);
if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) ||
(tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
@@ -4383,6 +4434,26 @@ relink:
@@ -4381,6 +4432,26 @@ relink:
else
tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
@ -219,7 +219,7 @@
tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
if (tp->link_config.active_duplex == DUPLEX_HALF)
tp->mac_mode |= MAC_MODE_HALF_DUPLEX;
@@ -8110,6 +8181,14 @@ static int tg3_chip_reset(struct tg3 *tp
@@ -8108,6 +8179,14 @@ static int tg3_chip_reset(struct tg3 *tp
tw32(0x5000, 0x400);
}
@ -234,7 +234,7 @@
tw32(GRC_MODE, tp->grc_mode);
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
@@ -9729,6 +9808,11 @@ static void tg3_timer(unsigned long __op
@@ -9720,6 +9799,11 @@ static void tg3_timer(unsigned long __op
tg3_flag(tp, 57765_CLASS))
tg3_chk_missed_msi(tp);
@ -246,7 +246,7 @@
if (!tg3_flag(tp, TAGGED_STATUS)) {
/* All of this garbage is because when using non-tagged
* IRQ status the mailbox/status_block protocol the chip
@@ -11424,6 +11508,11 @@ static int tg3_test_nvram(struct tg3 *tp
@@ -11415,6 +11499,11 @@ static int tg3_test_nvram(struct tg3 *tp
if (tg3_flag(tp, NO_NVRAM))
return 0;
@ -258,7 +258,7 @@
if (tg3_nvram_read(tp, 0, &magic) != 0)
return -EIO;
@@ -12392,11 +12481,12 @@ static int tg3_ioctl(struct net_device *
@@ -12383,11 +12472,12 @@ static int tg3_ioctl(struct net_device *
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
break; /* We have no PHY */
@ -273,7 +273,7 @@
spin_unlock_bh(&tp->lock);
data->val_out = mii_regval;
@@ -12408,11 +12498,12 @@ static int tg3_ioctl(struct net_device *
@@ -12399,11 +12489,12 @@ static int tg3_ioctl(struct net_device *
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
break; /* We have no PHY */
@ -288,7 +288,7 @@
spin_unlock_bh(&tp->lock);
return err;
@@ -13260,6 +13351,13 @@ static void __devinit tg3_get_5720_nvram
@@ -13251,6 +13342,13 @@ static void __devinit tg3_get_5720_nvram
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
static void __devinit tg3_nvram_init(struct tg3 *tp)
{
@ -302,7 +302,7 @@
tw32_f(GRC_EEPROM_ADDR,
(EEPROM_ADDR_FSM_RESET |
(EEPROM_DEFAULT_CLOCK_PERIOD <<
@@ -13752,10 +13850,19 @@ static int __devinit tg3_phy_probe(struc
@@ -13743,10 +13841,19 @@ static int __devinit tg3_phy_probe(struc
* subsys device table.
*/
p = tg3_lookup_by_subsys(tp);
@ -324,7 +324,7 @@
if (!tp->phy_id ||
tp->phy_id == TG3_PHY_ID_BCM8002)
tp->phy_flags |= TG3_PHYFLG_PHY_SERDES;
@@ -14765,6 +14872,11 @@ static int __devinit tg3_get_invariants(
@@ -14756,6 +14863,11 @@ static int __devinit tg3_get_invariants(
}
}
@ -336,7 +336,7 @@
/* Get eeprom hw config before calling tg3_set_power_state().
* In particular, the TG3_FLAG_IS_NIC flag must be
* determined before calling tg3_set_power_state() so that
@@ -15174,6 +15286,10 @@ static int __devinit tg3_get_device_addr
@@ -15165,6 +15277,10 @@ static int __devinit tg3_get_device_addr
}
if (!is_valid_ether_addr(&dev->dev_addr[0])) {
@ -347,7 +347,7 @@
#ifdef CONFIG_SPARC
if (!tg3_get_default_macaddr_sparc(tp))
return 0;
@@ -15458,7 +15574,8 @@ static int __devinit tg3_test_dma(struct
@@ -15449,7 +15565,8 @@ static int __devinit tg3_test_dma(struct
if (tg3_flag(tp, 40BIT_DMA_BUG) &&
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
tp->dma_rwctrl |= 0x8000;
@ -357,7 +357,7 @@
tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703)
@@ -15820,6 +15937,17 @@ static int __devinit tg3_init_one(struct
@@ -15811,6 +15928,17 @@ static int __devinit tg3_init_one(struct
tp->msg_enable = tg3_debug;
else
tp->msg_enable = TG3_DEF_MSG_ENABLE;

2
target/linux/brcm63xx/Makefile
View File

@ -10,7 +10,7 @@ ARCH:=mips
BOARD:=brcm63xx
BOARDNAME:=Broadcom BCM63xx
FEATURES:=squashfs jffs2 usb atm pci pcmcia
LINUX_VERSION:=3.6.7
LINUX_VERSION:=3.6.8
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
include $(INCLUDE_DIR)/target.mk

2
target/linux/generic/patches-3.6/340-module_alloc_size_check.patch
View File

@ -1,6 +1,6 @@
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2353,12 +2353,15 @@ static void dynamic_debug_remove(struct
@@ -2358,12 +2358,15 @@ static void dynamic_debug_remove(struct
void * __weak module_alloc(unsigned long size)
{

2
target/linux/generic/patches-3.6/850-glamo_headers.patch
View File

@ -10,7 +10,7 @@
#define FB_ACCEL_NEOMAGIC_NM2093 92 /* NeoMagic NM2093 */
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -144,6 +144,8 @@ header-y += generic_serial.h
@@ -145,6 +145,8 @@ header-y += generic_serial.h
header-y += genetlink.h
header-y += gfs2_ondisk.h
header-y += gigaset_dev.h

4
target/linux/generic/patches-3.6/950-vm_exports.patch
View File

@ -1,6 +1,6 @@
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2902,6 +2902,16 @@ EXPORT_SYMBOL_GPL(shmem_truncate_range);
@@ -2914,6 +2914,16 @@ EXPORT_SYMBOL_GPL(shmem_truncate_range);
/* common code */
@ -17,7 +17,7 @@
/**
* shmem_file_setup - get an unlinked file living in tmpfs
* @name: name for dentry (to be seen in /proc/<pid>/maps
@@ -2979,11 +2989,8 @@ int shmem_zero_setup(struct vm_area_stru
@@ -2991,11 +3001,8 @@ int shmem_zero_setup(struct vm_area_stru
if (IS_ERR(file))
return PTR_ERR(file);

2
target/linux/lantiq/Makefile
View File

@ -13,7 +13,7 @@ SUBTARGETS:=danube ar9 vr9 falcon svip_be
LINUX_VERSION:=3.3.8
#SUBTARGETS=xway ase
#LINUX_VERSION:=3.6.7
#LINUX_VERSION:=3.6.8
CFLAGS=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves

2
target/linux/malta/Makefile
View File

@ -13,7 +13,7 @@ SUBTARGETS:=le be
INITRAMFS_EXTRA_FILES:=
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
LINUX_VERSION:=3.6.7
LINUX_VERSION:=3.6.8
DEVICE_TYPE:=developerboard

2
target/linux/ramips/Makefile
View File

@ -13,7 +13,7 @@ SUBTARGETS:=rt288x rt305x rt3883
CFLAGS:=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves
FEATURES:=squashfs
LINUX_VERSION:=3.6.7
LINUX_VERSION:=3.6.8
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES+=\

2
target/linux/sparc/Makefile
View File

@ -11,7 +11,7 @@ BOARD:=sparc
BOARDNAME:=Sun UltraSPARC
FEATURES+=fpu tgz jffs2 ext4 squashfs
LINUX_VERSION:=3.6.7
LINUX_VERSION:=3.6.8
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
include $(INCLUDE_DIR)/target.mk

2
target/linux/uml/Makefile
View File

@ -23,7 +23,7 @@ BOARDNAME:=User Mode Linux
FEATURES:=ext4 audio
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
LINUX_VERSION:=3.6.7
LINUX_VERSION:=3.6.8
include $(INCLUDE_DIR)/target.mk