qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-24 01:01:52 +02:00
Code

upgrade to 2.6.30-rc8

Browse Source 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16307 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
kaloz 2009-06-03 13:42:28 +00:00
parent 9592a6ef10
commit 7d01bddd18
24 changed files with 69 additions and 435 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
target/linux/avr32/Makefile
View File

@ -10,7 +10,7 @@ ARCH:=avr32
BOARD:=avr32
BOARDNAME:=Atmel AVR32
FEATURES:=squashfs
LINUX_VERSION:=2.6.30-rc7
LINUX_VERSION:=2.6.30-rc8
include $(INCLUDE_DIR)/target.mk

229
target/linux/avr32/patches/000-revert_usart_pin_selection.patch
View File

@ -1,229 +0,0 @@
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -118,7 +118,7 @@ static void __init set_hw_addr(struct pl
void __init setup_board(void)
{
- at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -252,12 +252,12 @@ static void __init atstk1002_setup_extda
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -115,12 +115,12 @@ static void __init atstk1003_setup_extda
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -120,12 +120,12 @@ static void __init atstk1004_setup_extda
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -250,7 +250,7 @@ static void __init favr32_setup_atmel_pw
void __init setup_board(void)
{
- at32_map_usart(3, 0, 0); /* USART 3 => /dev/ttyS0 */
+ at32_map_usart(3, 0); /* USART 3 => /dev/ttyS0 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/hammerhead/setup.c
+++ b/arch/avr32/boards/hammerhead/setup.c
@@ -165,7 +165,7 @@ static void __init set_hw_addr(struct pl
void __init setup_board(void)
{
- at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -231,9 +231,9 @@ static void detect_merisc_board_id(void)
void __init setup_board(void)
{
- at32_map_usart(0, 0, 0);
- at32_map_usart(1, 1, 0);
- at32_map_usart(3, 3, 0);
+ at32_map_usart(0, 0);
+ at32_map_usart(1, 1);
+ at32_map_usart(3, 3);
at32_setup_serial_console(1);
}
@@ -248,7 +248,7 @@ static int __init merisc_init(void)
at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL | (1 << 26));
if (merisc_board_id >= 1)
- at32_map_usart(2, 2, 0);
+ at32_map_usart(2, 2);
at32_add_device_usart(0);
at32_add_device_usart(1);
--- a/arch/avr32/boards/mimc200/setup.c
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -175,10 +175,10 @@ static void __init set_hw_addr(struct pl
void __init setup_board(void)
{
- at32_map_usart(0, 0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */
- at32_map_usart(1, 1, 0); /* USART 1: /dev/ttyS1 (RS232) */
- at32_map_usart(2, 2, 0); /* USART 2: /dev/ttyS2 (RS485) */
- at32_map_usart(3, 3, 0); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */
+ at32_map_usart(0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */
+ at32_map_usart(1, 1); /* USART 1: /dev/ttyS1 (RS232) */
+ at32_map_usart(2, 2); /* USART 2: /dev/ttyS2 (RS485) */
+ at32_map_usart(3, 3); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */
}
static struct i2c_gpio_platform_data i2c_gpio_data = {
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -966,68 +966,56 @@ static struct resource atmel_usart3_reso
DEFINE_DEV_DATA(atmel_usart, 3);
DEV_CLK(usart, atmel_usart3, pba, 6);
-static inline void configure_usart0_pins(int flags)
+static inline void configure_usart0_pins(void)
{
u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 6);
- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 7);
- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 10);
select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
-static inline void configure_usart1_pins(int flags)
+static inline void configure_usart1_pins(void)
{
u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 19);
- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 20);
- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 16);
select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
}
-static inline void configure_usart2_pins(int flags)
+static inline void configure_usart2_pins(void)
{
u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 30);
- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 29);
- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 28);
select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
-static inline void configure_usart3_pins(int flags)
+static inline void configure_usart3_pins(void)
{
u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 16);
- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 15);
- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 19);
select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static struct platform_device *__initdata at32_usarts[4];
-void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags)
+void __init at32_map_usart(unsigned int hw_id, unsigned int line)
{
struct platform_device *pdev;
switch (hw_id) {
case 0:
pdev = &atmel_usart0_device;
- configure_usart0_pins(flags);
+ configure_usart0_pins();
break;
case 1:
pdev = &atmel_usart1_device;
- configure_usart1_pins(flags);
+ configure_usart1_pins();
break;
case 2:
pdev = &atmel_usart2_device;
- configure_usart2_pins(flags);
+ configure_usart2_pins();
break;
case 3:
pdev = &atmel_usart3_device;
- configure_usart3_pins(flags);
+ configure_usart3_pins();
break;
default:
return;
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -26,17 +26,12 @@ static inline void __deprecated at32_add
#define ATMEL_MAX_UART 4
extern struct platform_device *atmel_default_console_device;
-/* Flags for selecting USART extra pins */
-#define ATMEL_USART_RTS 0x01
-#define ATMEL_USART_CTS 0x02
-#define ATMEL_USART_CLK 0x03
-
struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */
short use_dma_rx; /* use receive DMA? */
void __iomem *regs; /* virtual base address, if any */
};
-void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
+void at32_map_usart(unsigned int hw_id, unsigned int line);
struct platform_device *at32_add_device_usart(unsigned int id);
struct eth_platform_data {

22
target/linux/avr32/patches/001-fix_usart_clash.patch Normal file
View File

@ -0,0 +1,22 @@
Fix clash in ATMEL_USART_ flags
At the moment ATMEL_USART_{RTS,CTS,CLK} have the values
1, 2 and 3 respectively. Given these are used in bitmasks,
trying to turn on the CLK line will in fact turn on the
RTS and CTS lines as well.
Change the value of ATMEL_USART_CLK to 4.
Signed-off-by: Ben Nizette <bn@niasdigital.com>
---
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -29,7 +29,7 @@ extern struct platform_device *atmel_def
/* Flags for selecting USART extra pins */
#define ATMEL_USART_RTS 0x01
#define ATMEL_USART_CTS 0x02
-#define ATMEL_USART_CLK 0x03
+#define ATMEL_USART_CLK 0x04
struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */

2
target/linux/cobalt/Makefile
View File

@ -11,7 +11,7 @@ BOARD:=cobalt
BOARDNAME:=Cobalt Microservers
FEATURES:=tgz pci
LINUX_VERSION:=2.6.30-rc7
LINUX_VERSION:=2.6.30-rc8
include $(INCLUDE_DIR)/target.mk

2
target/linux/etrax/Makefile
View File

@ -10,7 +10,7 @@ ARCH:=cris
BOARD:=etrax
BOARDNAME:=Foxboard (ETRAX 100LX)
FEATURES:=squashfs jffs2
LINUX_VERSION:=2.6.30-rc7
LINUX_VERSION:=2.6.30-rc8
DEVICE_TYPE=
include $(INCLUDE_DIR)/target.mk

2
target/linux/gemini/Makefile
View File

@ -12,7 +12,7 @@ BOARDNAME:=Cortina Systems CS351x
FEATURES:=squashfs
CFLAGS:=-Os -pipe -march=armv4 -mtune=arm9tdmi -funit-at-a-time
LINUX_VERSION:=2.6.30-rc7
LINUX_VERSION:=2.6.30-rc8
include $(INCLUDE_DIR)/target.mk

14
target/linux/gemini/patches/001-git_sync.patch
View File

@ -189,8 +189,8 @@
.globl __kuser_helper_start
__kuser_helper_start:
@@ -821,7 +822,7 @@ __kuser_memory_barrier: @ 0xffff0fa0
#endif
@@ -818,7 +819,7 @@ __kuser_memory_barrier: @ 0xffff0fa0
smp_dmb
usr_ret lr
- .align 5
@ -198,7 +198,7 @@
/*
* Reference prototype:
@@ -953,7 +954,7 @@ kuser_cmpxchg_fixup:
@@ -950,7 +951,7 @@ kuser_cmpxchg_fixup:
#endif
@ -207,7 +207,7 @@
/*
* Reference prototype:
@@ -1035,7 +1036,7 @@ __kuser_helper_end:
@@ -1032,7 +1033,7 @@ __kuser_helper_end:
* of which is copied into r0 for the mode specific abort handler.
*/
.macro vector_stub, name, mode, correction=0
@ -216,7 +216,7 @@
vector_\name:
.if \correction
@@ -1160,7 +1161,7 @@ __stubs_start:
@@ -1157,7 +1158,7 @@ __stubs_start:
.long __und_invalid @ e
.long __und_invalid @ f
@ -225,7 +225,7 @@
/*=============================================================================
* Undefined FIQs
@@ -1190,7 +1191,7 @@ vector_addrexcptn:
@@ -1187,7 +1188,7 @@ vector_addrexcptn:
* We group all the following data together to optimise
* for CPUs with separate I & D caches.
*/
@ -850,7 +850,7 @@
+#endif /* __MACH_GMAC_H__ */
--- a/arch/arm/mach-gemini/include/mach/hardware.h
+++ b/arch/arm/mach-gemini/include/mach/hardware.h
@@ -72,4 +72,12 @@
@@ -71,4 +71,12 @@
*/
#define IO_ADDRESS(x) ((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)

42
target/linux/generic-2.6/patches-2.6.30/208-rtl8110sb_fix.patch
View File

@ -1,42 +0,0 @@
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1890,7 +1890,7 @@ static const struct rtl_cfg_info {
.hw_start = rtl_hw_start_8169,
.region = 1,
.align = 0,
- .intr_event = SYSErr | LinkChg | RxOverflow |
+ .intr_event = LinkChg | RxOverflow |
RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
.napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
.features = RTL_FEATURE_GMII
@@ -1899,7 +1899,7 @@ static const struct rtl_cfg_info {
.hw_start = rtl_hw_start_8168,
.region = 2,
.align = 8,
- .intr_event = SYSErr | LinkChg | RxOverflow |
+ .intr_event = LinkChg | RxOverflow |
TxErr | TxOK | RxOK | RxErr,
.napi_event = TxErr | TxOK | RxOK | RxOverflow,
.features = RTL_FEATURE_GMII | RTL_FEATURE_MSI
@@ -1908,7 +1908,7 @@ static const struct rtl_cfg_info {
.hw_start = rtl_hw_start_8101,
.region = 2,
.align = 8,
- .intr_event = SYSErr | LinkChg | RxOverflow | PCSTimeout |
+ .intr_event = LinkChg | RxOverflow | PCSTimeout |
RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
.napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
.features = RTL_FEATURE_MSI
@@ -3582,10 +3582,12 @@ static irqreturn_t rtl8169_interrupt(int
goto out;
}
+#if 0
if (unlikely(status & SYSErr)) {
rtl8169_pcierr_interrupt(dev);
goto out;
}
+#endif
if (status & LinkChg)
rtl8169_check_link_status(dev, tp, ioaddr);

10
target/linux/generic-2.6/patches-2.6.30/680-phy_ar8216.patch
View File

@ -1,8 +1,8 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -96,6 +96,10 @@ config ADM6996_PHY
config MVSWITCH_PHY
tristate "Driver for Marvell 88E6060 switches"
@@ -100,6 +100,10 @@ config IP175C_PHY
tristate "Driver for IC+ IP175C/IP178C switches"
select SWCONFIG
+config AR8216_PHY
+ tristate "Driver for Atheros AR8216 switches"
@ -13,9 +13,9 @@
depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_ADM6996_PHY) += adm6996.o
@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY) += adm6996.o
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP175C_PHY) += ip175c.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o

2
target/linux/generic-2.6/patches-2.6.30/801-usb_serial_endpoint_size.patch
View File

@ -17,7 +17,7 @@
port->bulk_in_size = buffer_size;
port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
@@ -1311,3 +1312,5 @@ MODULE_LICENSE("GPL");
@@ -1312,3 +1313,5 @@ MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");

2
target/linux/generic-2.6/patches-2.6.30/840-unable_to_open_console.patch
View File

@ -1,6 +1,6 @@
--- a/init/main.c
+++ b/init/main.c
@@ -812,7 +812,7 @@ static noinline int init_post(void)
@@ -811,7 +811,7 @@ static noinline int init_post(void)
numa_default_policy();
if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)

2
target/linux/generic-2.6/patches-2.6.30/922-gpiommc.patch
View File

@ -824,7 +824,7 @@
+be done automatically.
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2495,6 +2495,11 @@ T: git git://git.kernel.org/pub/scm/linu
@@ -2504,6 +2504,11 @@ T: git git://git.kernel.org/pub/scm/linu
S: Maintained
F: drivers/media/video/gspca/

112
target/linux/generic-2.6/patches-2.6.30/991-mv643xx_eth_coherent_dma_mask.patch
View File

@ -1,112 +0,0 @@
From: Nicolas Pitre <nico@cam.org>
Date: Fri, 22 May 2009 20:53:40 +0000 (-0400)
Subject: [ARM] add coherent DMA mask for mv643xx_eth
X-Git-Url: http://git.marvell.com/?p=orion.git;a=commitdiff_plain;h=a49a018a6ea6d73742a81d673fe5ec4a7d2137b3
[ARM] add coherent DMA mask for mv643xx_eth
Since commit eb0519b5a1cf, mv643xx_eth is non functional on ARM because
the platform device declaration does not include any coherent DMA mask
and coherent memory allocations fail.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -144,6 +144,9 @@ static struct platform_device kirkwood_g
.id = 0,
.num_resources = 1,
.resource = kirkwood_ge00_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
@@ -202,6 +205,9 @@ static struct platform_device kirkwood_g
.id = 1,
.num_resources = 1,
.resource = kirkwood_ge01_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
--- a/arch/arm/mach-loki/common.c
+++ b/arch/arm/mach-loki/common.c
@@ -82,6 +82,9 @@ static struct platform_device loki_ge0 =
.id = 0,
.num_resources = 1,
.resource = loki_ge0_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
@@ -136,6 +139,9 @@ static struct platform_device loki_ge1 =
.id = 1,
.num_resources = 1,
.resource = loki_ge1_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge
.id = 0,
.num_resources = 1,
.resource = mv78xx0_ge00_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
@@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge
.id = 1,
.num_resources = 1,
.resource = mv78xx0_ge01_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
@@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge
.id = 2,
.num_resources = 1,
.resource = mv78xx0_ge10_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
@@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge
.id = 3,
.num_resources = 1,
.resource = mv78xx0_ge11_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -188,6 +188,9 @@ static struct platform_device orion5x_et
.id = 0,
.num_resources = 1,
.resource = orion5x_eth_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)

2
target/linux/generic-2.6/patches-2.6.30/999-use_preinit_as_init.patch
View File

@ -1,6 +1,6 @@
--- a/init/main.c
+++ b/init/main.c
@@ -836,10 +836,7 @@ static noinline int init_post(void)
@@ -835,10 +835,7 @@ static noinline int init_post(void)
printk(KERN_WARNING "Failed to execute %s. Attempting "
"defaults...\n", execute_command);
}

2
target/linux/kirkwood/Makefile
View File

@ -11,7 +11,7 @@ BOARD:=kirkwood
BOARDNAME:=Marvell Kirkwood
FEATURES:=tgz usb
LINUX_VERSION:=2.6.30-rc7
LINUX_VERSION:=2.6.30-rc8
include $(INCLUDE_DIR)/target.mk

2
target/linux/kirkwood/patches/003-gating.patch
View File

@ -16,7 +16,7 @@ Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com>
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -788,6 +788,38 @@ static void __init kirkwood_l2_init(void
@@ -786,6 +786,38 @@ static void __init kirkwood_l2_init(void
#endif
}

2
target/linux/octeon/Makefile
View File

@ -12,7 +12,7 @@ BOARDNAME:=Cavium Networks Octeon
FEATURES:=squashfs jffs2 pci
CFLAGS:=-Os -pipe -funit-at-a-time
LINUX_VERSION:=2.6.30-rc7
LINUX_VERSION:=2.6.30-rc8
include $(INCLUDE_DIR)/target.mk

6
target/linux/octeon/patches/001-handle_removal_h_constraint.patch
View File

@ -12,8 +12,8 @@ Signed-off-by: David Daney <ddaney@caviumnetworks.com>
--- a/arch/mips/include/asm/compiler.h
+++ b/arch/mips/include/asm/compiler.h
@@ -16,4 +16,11 @@
#define GCC_REG_ACCUM "accum"
@@ -26,4 +26,11 @@ typedef u64 uintx_t;
#endif
#endif
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4)
@ -26,7 +26,7 @@ Signed-off-by: David Daney <ddaney@caviumnetworks.com>
#endif /* _ASM_COMPILER_H */
--- a/arch/mips/include/asm/delay.h
+++ b/arch/mips/include/asm/delay.h
@@ -83,10 +83,14 @@ static inline void __udelay(unsigned lon
@@ -67,10 +67,14 @@ static inline unsigned long __usecs_to_l
: "r" (usecs), "r" (lpj)
: GCC_REG_ACCUM);
else if (sizeof(long) == 8 && !R4000_WAR)

2
target/linux/rb532/Makefile
View File

@ -11,7 +11,7 @@ BOARD:=rb532
BOARDNAME:=Mikrotik RouterBoard 532
FEATURES:=jffs2 pci tgz
LINUX_VERSION:=2.6.30-rc7
LINUX_VERSION:=2.6.30-rc8
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += hostapd-mini kmod-madwifi

2
target/linux/s3c24xx/Makefile
View File

@ -12,7 +12,7 @@ BOARDNAME:=Samsung S3C24xx
FEATURES:=jffs2
CFLAGS:=-O2 -pipe -march=armv4t -mtune=arm920t -funit-at-a-time
LINUX_VERSION:=2.6.30-rc7
LINUX_VERSION:=2.6.30-rc8
DEVICE_TYPE=phone

11
target/linux/s3c24xx/patches-2.6.30/030-dont-override-logo-with-early-printks.patch
View File

@ -1,7 +1,6 @@
diff -ruN linux-2.6.29.orig/drivers/video/console/fbcon.c linux-2.6.29/drivers/video/console/fbcon.c
--- linux-2.6.29.orig/drivers/video/console/fbcon.c 2009-05-14 22:21:12.000000000 +0200
+++ linux-2.6.29/drivers/video/console/fbcon.c 2009-05-15 01:45:36.000000000 +0200
@@ -562,7 +562,7 @@
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -562,7 +562,7 @@ static void fbcon_prepare_logo(struct vc
/* Need to make room for the logo */
struct fbcon_ops *ops = info->fbcon_par;
int cnt, erase = vc->vc_video_erase_char, step;
@ -10,7 +9,7 @@ diff -ruN linux-2.6.29.orig/drivers/video/console/fbcon.c linux-2.6.29/drivers/v
int logo_height;
if (info->flags & FBINFO_MODULE) {
@@ -581,37 +581,18 @@
@@ -581,37 +581,18 @@ static void fbcon_prepare_logo(struct vc
q = (unsigned short *) (vc->vc_origin +
vc->vc_size_row * rows);
step = logo_lines * cols;
@ -60,7 +59,7 @@ diff -ruN linux-2.6.29.orig/drivers/video/console/fbcon.c linux-2.6.29/drivers/v
scr_memsetw((unsigned short *) vc->vc_origin,
erase,
vc->vc_size_row * logo_lines);
@@ -621,16 +602,6 @@
@@ -621,16 +602,6 @@ static void fbcon_prepare_logo(struct vc
update_screen(vc);
}

28
target/linux/s3c24xx/patches-2.6.30/031-add-openwrt-logo.patch
View File

@ -1,7 +1,6 @@
diff -ruN linux-2.6.29.orig/drivers/video/logo/Kconfig linux-2.6.29/drivers/video/logo/Kconfig
--- linux-2.6.29.orig/drivers/video/logo/Kconfig 2009-05-14 22:21:12.000000000 +0200
+++ linux-2.6.29/drivers/video/logo/Kconfig 2009-05-14 22:28:50.000000000 +0200
@@ -82,4 +82,8 @@
--- a/drivers/video/logo/Kconfig
+++ b/drivers/video/logo/Kconfig
@@ -82,4 +82,8 @@ config LOGO_M32R_CLUT224
depends on M32R
default y
@ -10,10 +9,9 @@ diff -ruN linux-2.6.29.orig/drivers/video/logo/Kconfig linux-2.6.29/drivers/vide
+ default y
+
endif # LOGO
diff -ruN linux-2.6.29.orig/drivers/video/logo/logo.c linux-2.6.29/drivers/video/logo/logo.c
--- linux-2.6.29.orig/drivers/video/logo/logo.c 2009-05-14 22:21:12.000000000 +0200
+++ linux-2.6.29/drivers/video/logo/logo.c 2009-05-14 22:37:05.000000000 +0200
@@ -35,6 +35,7 @@
--- a/drivers/video/logo/logo.c
+++ b/drivers/video/logo/logo.c
@@ -35,6 +35,7 @@ extern const struct linux_logo logo_supe
extern const struct linux_logo logo_superh_vga16;
extern const struct linux_logo logo_superh_clut224;
extern const struct linux_logo logo_m32r_clut224;
@ -21,7 +19,7 @@ diff -ruN linux-2.6.29.orig/drivers/video/logo/logo.c linux-2.6.29/drivers/video
static int nologo;
module_param(nologo, bool, 0);
@@ -115,6 +116,10 @@
@@ -115,6 +116,10 @@ const struct linux_logo * __init_refok f
/* M32R Linux logo */
logo = &logo_m32r_clut224;
#endif
@ -32,9 +30,8 @@ diff -ruN linux-2.6.29.orig/drivers/video/logo/logo.c linux-2.6.29/drivers/video
}
return logo;
}
diff -ruN linux-2.6.29.orig/drivers/video/logo/logo_openwrt_clut224.ppm linux-2.6.29/drivers/video/logo/logo_openwrt_clut224.ppm
--- linux-2.6.29.orig/drivers/video/logo/logo_openwrt_clut224.ppm 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.29/drivers/video/logo/logo_openwrt_clut224.ppm 2009-05-15 09:54:13.000000000 +0200
--- /dev/null
+++ b/drivers/video/logo/logo_openwrt_clut224.ppm
@@ -0,0 +1,38403 @@
+P3
+480 480
@ -38439,10 +38436,9 @@ diff -ruN linux-2.6.29.orig/drivers/video/logo/logo_openwrt_clut224.ppm linux-2.
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
diff -ruN linux-2.6.29.orig/drivers/video/logo/Makefile linux-2.6.29/drivers/video/logo/Makefile
--- linux-2.6.29.orig/drivers/video/logo/Makefile 2009-05-14 22:21:12.000000000 +0200
+++ linux-2.6.29/drivers/video/logo/Makefile 2009-05-14 22:35:42.000000000 +0200
@@ -15,6 +15,7 @@
--- a/drivers/video/logo/Makefile
+++ b/drivers/video/logo/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_LOGO_SUPERH_MONO) += logo_
obj-$(CONFIG_LOGO_SUPERH_VGA16) += logo_superh_vga16.o
obj-$(CONFIG_LOGO_SUPERH_CLUT224) += logo_superh_clut224.o
obj-$(CONFIG_LOGO_M32R_CLUT224) += logo_m32r_clut224.o

2
target/linux/s3c24xx/patches-2.6.30/040-rename-serialdevs.patch
View File

@ -1,6 +1,6 @@
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -882,7 +882,7 @@ static struct uart_ops s3c24xx_serial_op
@@ -878,7 +878,7 @@ static struct uart_ops s3c24xx_serial_op
static struct uart_driver s3c24xx_uart_drv = {
.owner = THIS_MODULE,

2
target/linux/sibyte/Makefile
View File

@ -12,7 +12,7 @@ BOARDNAME:=Broadcom/SiByte SB-1
FEATURES:=fpu
CFLAGS:=-Os -pipe -march=sb1 -funit-at-a-time
LINUX_VERSION:=2.6.30-rc7
LINUX_VERSION:=2.6.30-rc8
include $(INCLUDE_DIR)/target.mk