mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-25 00:23:56 +02:00
initial merge of danube, pci is still broken and the new dma code still needs to be tested, before the merge
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9704 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
blogic
parent
75866965cd
commit
80484c3972
21
target/linux/danube/Makefile
Normal file
21
target/linux/danube/Makefile
Normal file
@ -0,0 +1,21 @@
|
||||
#
|
||||
# Copyright (C) 2007 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
include $(TOPDIR)/rules.mk
|
||||
|
||||
ARCH:=mips
|
||||
BOARD:=danube
|
||||
BOARDNAME:=Infineon Danube
|
||||
FEATURES:=squashfs jffs2 broken
|
||||
LINUX_VERSION:=2.6.23
|
||||
|
||||
include $(INCLUDE_DIR)/target.mk
|
||||
|
||||
define Target/Description
|
||||
Build firmware images for Infineon Danube
|
||||
endef
|
||||
|
||||
$(eval $(call BuildTarget))
|
||||
14
target/linux/danube/base-files/etc/config/network
Normal file
14
target/linux/danube/base-files/etc/config/network
Normal file
@ -0,0 +1,14 @@
|
||||
# Copyright (C) 2006 OpenWrt.org
|
||||
|
||||
config interface loopback
|
||||
option ifname lo
|
||||
option proto static
|
||||
option ipaddr 127.0.0.1
|
||||
option netmask 255.0.0.0
|
||||
|
||||
config interface lan
|
||||
option ifname eth0
|
||||
#option type bridge
|
||||
option proto static
|
||||
option ipaddr 192.168.45.110
|
||||
option netmask 255.255.255.0
|
||||
185
target/linux/danube/config-2.6.23
Normal file
185
target/linux/danube/config-2.6.23
Normal file
@ -0,0 +1,185 @@
|
||||
CONFIG_32BIT=y
|
||||
# CONFIG_64BIT is not set
|
||||
# CONFIG_8139TOO is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
# CONFIG_ATM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
CONFIG_BITREVERSE=y
|
||||
# CONFIG_BT is not set
|
||||
CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2 init=/etc/preinit"
|
||||
CONFIG_CPU_BIG_ENDIAN=y
|
||||
CONFIG_CPU_HAS_LLSC=y
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
# CONFIG_CPU_LITTLE_ENDIAN is not set
|
||||
# CONFIG_CPU_LOONGSON2 is not set
|
||||
CONFIG_CPU_MIPS32=y
|
||||
CONFIG_CPU_MIPS32_R1=y
|
||||
# CONFIG_CPU_MIPS32_R2 is not set
|
||||
# CONFIG_CPU_MIPS64_R1 is not set
|
||||
# CONFIG_CPU_MIPS64_R2 is not set
|
||||
CONFIG_CPU_MIPSR1=y
|
||||
# CONFIG_CPU_NEVADA is not set
|
||||
# CONFIG_CPU_R10000 is not set
|
||||
# CONFIG_CPU_R3000 is not set
|
||||
# CONFIG_CPU_R4300 is not set
|
||||
# CONFIG_CPU_R4X00 is not set
|
||||
# CONFIG_CPU_R5000 is not set
|
||||
# CONFIG_CPU_R5432 is not set
|
||||
# CONFIG_CPU_R6000 is not set
|
||||
# CONFIG_CPU_R8000 is not set
|
||||
# CONFIG_CPU_RM7000 is not set
|
||||
# CONFIG_CPU_RM9000 is not set
|
||||
# CONFIG_CPU_SB1 is not set
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
# CONFIG_CPU_TX39XX is not set
|
||||
# CONFIG_CPU_TX49XX is not set
|
||||
# CONFIG_CPU_VR41XX is not set
|
||||
# CONFIG_CRYPTO_HW is not set
|
||||
CONFIG_DANUBE=y
|
||||
CONFIG_DANUBE_ASC_UART=y
|
||||
CONFIG_DANUBE_MII0=y
|
||||
CONFIG_DANUBE_MII1=y
|
||||
CONFIG_DEVPORT=y
|
||||
# CONFIG_DM9000 is not set
|
||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_STD_PC_SERIAL_PORT=y
|
||||
# CONFIG_HOSTAP is not set
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
# CONFIG_I2C is not set
|
||||
# CONFIG_IDE is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IRQ_CPU=y
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_LEMOTE_FULONG is not set
|
||||
# CONFIG_MACH_ALCHEMY is not set
|
||||
# CONFIG_MACH_DECSTATION is not set
|
||||
# CONFIG_MACH_JAZZ is not set
|
||||
# CONFIG_MACH_VR41XX is not set
|
||||
CONFIG_MIPS=y
|
||||
# CONFIG_MIPS_ATLAS is not set
|
||||
# CONFIG_MIPS_COBALT is not set
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
# CONFIG_MIPS_MALTA is not set
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
# CONFIG_MIPS_MT_SMP is not set
|
||||
# CONFIG_MIPS_MT_SMTC is not set
|
||||
# CONFIG_MIPS_SEAD is not set
|
||||
# CONFIG_MIPS_SIM is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
CONFIG_MTD_BLKDEVS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
|
||||
CONFIG_MTD_CFI_GEOMETRY=y
|
||||
CONFIG_MTD_CFI_I1=y
|
||||
CONFIG_MTD_CFI_I2=y
|
||||
# CONFIG_MTD_CFI_I4 is not set
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
|
||||
CONFIG_MTD_CFI_NOSWAP=y
|
||||
# CONFIG_MTD_CFI_STAA is not set
|
||||
CONFIG_MTD_CFI_UTIL=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y
|
||||
# CONFIG_MTD_CONCAT is not set
|
||||
CONFIG_MTD_DANUBE=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
# CONFIG_MTD_DOC2000 is not set
|
||||
# CONFIG_MTD_DOC2001 is not set
|
||||
# CONFIG_MTD_DOC2001PLUS is not set
|
||||
CONFIG_MTD_GEN_PROBE=y
|
||||
# CONFIG_MTD_JEDECPROBE is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
# CONFIG_MTD_OTP is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_PCI is not set
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
|
||||
CONFIG_MTD_PHYSMAP_LEN=0x0
|
||||
CONFIG_MTD_PHYSMAP_START=0x0
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
# CONFIG_MTD_PMC551 is not set
|
||||
# CONFIG_MTD_RAM is not set
|
||||
# CONFIG_MTD_REDBOOT_PARTS is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_NATSEMI is not set
|
||||
# CONFIG_NE2K_PCI is not set
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
# CONFIG_NO_IOPORT is not set
|
||||
# CONFIG_PAGE_SIZE_16KB is not set
|
||||
CONFIG_PAGE_SIZE_4KB=y
|
||||
# CONFIG_PAGE_SIZE_64KB is not set
|
||||
# CONFIG_PAGE_SIZE_8KB is not set
|
||||
# CONFIG_PCIPCWATCHDOG is not set
|
||||
# CONFIG_PMC_MSP is not set
|
||||
# CONFIG_PMC_YOSEMITE is not set
|
||||
# CONFIG_PNX8550_JBS is not set
|
||||
# CONFIG_PNX8550_STB810 is not set
|
||||
# CONFIG_RTC is not set
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
CONFIG_SCSI_WAIT_SCAN=m
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
CONFIG_SERIAL_DANUBE=y
|
||||
# CONFIG_SGI_IP22 is not set
|
||||
# CONFIG_SGI_IP27 is not set
|
||||
# CONFIG_SGI_IP32 is not set
|
||||
# CONFIG_SIBYTE_BIGSUR is not set
|
||||
# CONFIG_SIBYTE_CARMEL is not set
|
||||
# CONFIG_SIBYTE_CRHINE is not set
|
||||
# CONFIG_SIBYTE_CRHONE is not set
|
||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
||||
# CONFIG_SIBYTE_PTSWARM is not set
|
||||
# CONFIG_SIBYTE_RHONE is not set
|
||||
# CONFIG_SIBYTE_SENTOSA is not set
|
||||
# CONFIG_SIBYTE_SWARM is not set
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
|
||||
# CONFIG_TC35815 is not set
|
||||
# CONFIG_TOSHIBA_JMR3927 is not set
|
||||
# CONFIG_TOSHIBA_RBTX4927 is not set
|
||||
# CONFIG_TOSHIBA_RBTX4938 is not set
|
||||
CONFIG_TRAD_SIGNALS=y
|
||||
# CONFIG_USBPCWATCHDOG is not set
|
||||
# CONFIG_USB_EHCI_HCD is not set
|
||||
# CONFIG_USB_R8A66597_HCD is not set
|
||||
# CONFIG_USB_SERIAL_OTI6858 is not set
|
||||
# CONFIG_USB_UHCI_HCD is not set
|
||||
# CONFIG_USER_NS is not set
|
||||
# CONFIG_VGASTATE is not set
|
||||
# CONFIG_VIA_RHINE is not set
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
16
target/linux/danube/files/arch/mips/danube/Kconfig
Normal file
16
target/linux/danube/files/arch/mips/danube/Kconfig
Normal file
@ -0,0 +1,16 @@
|
||||
# copyright 2007 john crispin <blogic@openwrt.org>
|
||||
|
||||
menu "Danube built-in"
|
||||
|
||||
config DANUBE_ASC_UART
|
||||
bool "Danube asc uart"
|
||||
select SERIAL_CORE
|
||||
select SERIAL_CORE_CONSOLE
|
||||
default y
|
||||
|
||||
config MTD_DANUBE
|
||||
bool "Danube flash map"
|
||||
default y
|
||||
|
||||
endmenu
|
||||
|
||||
10
target/linux/danube/files/arch/mips/danube/Makefile
Normal file
10
target/linux/danube/files/arch/mips/danube/Makefile
Normal file
@ -0,0 +1,10 @@
|
||||
#
|
||||
# Copyright 2007 openwrt.org
|
||||
# John Crispin <blogic@openwrt.org>
|
||||
#
|
||||
# Makefile for Infineon Danube
|
||||
#
|
||||
obj-y := reset.o prom.o setup.o interrupt.o dma-core.o
|
||||
|
||||
obj-$(CONFIG_PCI) += pci.o
|
||||
obj-$(CONFIG_KGDB) += kgdb_serial.o
|
||||
757
target/linux/danube/files/arch/mips/danube/dma-core.c
Normal file
757
target/linux/danube/files/arch/mips/danube/dma-core.c
Normal file
@ -0,0 +1,757 @@
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/timer.h>
|
||||
#include <linux/fs.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/stat.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/tty.h>
|
||||
#include <linux/selection.h>
|
||||
#include <linux/kmod.h>
|
||||
#include <linux/vmalloc.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/delay.h>
|
||||
#include <asm/uaccess.h>
|
||||
#include <linux/errno.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
#include <asm/danube/danube.h>
|
||||
#include <asm/danube/danube_irq.h>
|
||||
#include <asm/danube/danube_dma.h>
|
||||
|
||||
/*25 descriptors for each dma channel,4096/8/20=25.xx*/
|
||||
#define DANUBE_DMA_DESCRIPTOR_OFFSET 25
|
||||
|
||||
#define MAX_DMA_DEVICE_NUM 6 /*max ports connecting to dma */
|
||||
#define MAX_DMA_CHANNEL_NUM 20 /*max dma channels */
|
||||
#define DMA_INT_BUDGET 100 /*budget for interrupt handling */
|
||||
#define DMA_POLL_COUNTER 4 /*fix me, set the correct counter value here! */
|
||||
|
||||
extern void mask_and_ack_danube_irq (unsigned int irq_nr);
|
||||
extern void enable_danube_irq (unsigned int irq_nr);
|
||||
extern void disable_danube_irq (unsigned int irq_nr);
|
||||
|
||||
u64 *g_desc_list;
|
||||
_dma_device_info dma_devs[MAX_DMA_DEVICE_NUM];
|
||||
_dma_channel_info dma_chan[MAX_DMA_CHANNEL_NUM];
|
||||
|
||||
char global_device_name[MAX_DMA_DEVICE_NUM][20] =
|
||||
{ {"PPE"}, {"DEU"}, {"SPI"}, {"SDIO"}, {"MCTRL0"}, {"MCTRL1"} };
|
||||
|
||||
_dma_chan_map default_dma_map[MAX_DMA_CHANNEL_NUM] = {
|
||||
{"PPE", DANUBE_DMA_RX, 0, DANUBE_DMA_CH0_INT, 0},
|
||||
{"PPE", DANUBE_DMA_TX, 0, DANUBE_DMA_CH1_INT, 0},
|
||||
{"PPE", DANUBE_DMA_RX, 1, DANUBE_DMA_CH2_INT, 1},
|
||||
{"PPE", DANUBE_DMA_TX, 1, DANUBE_DMA_CH3_INT, 1},
|
||||
{"PPE", DANUBE_DMA_RX, 2, DANUBE_DMA_CH4_INT, 2},
|
||||
{"PPE", DANUBE_DMA_TX, 2, DANUBE_DMA_CH5_INT, 2},
|
||||
{"PPE", DANUBE_DMA_RX, 3, DANUBE_DMA_CH6_INT, 3},
|
||||
{"PPE", DANUBE_DMA_TX, 3, DANUBE_DMA_CH7_INT, 3},
|
||||
{"DEU", DANUBE_DMA_RX, 0, DANUBE_DMA_CH8_INT, 0},
|
||||
{"DEU", DANUBE_DMA_TX, 0, DANUBE_DMA_CH9_INT, 0},
|
||||
{"DEU", DANUBE_DMA_RX, 1, DANUBE_DMA_CH10_INT, 1},
|
||||
{"DEU", DANUBE_DMA_TX, 1, DANUBE_DMA_CH11_INT, 1},
|
||||
{"SPI", DANUBE_DMA_RX, 0, DANUBE_DMA_CH12_INT, 0},
|
||||
{"SPI", DANUBE_DMA_TX, 0, DANUBE_DMA_CH13_INT, 0},
|
||||
{"SDIO", DANUBE_DMA_RX, 0, DANUBE_DMA_CH14_INT, 0},
|
||||
{"SDIO", DANUBE_DMA_TX, 0, DANUBE_DMA_CH15_INT, 0},
|
||||
{"MCTRL0", DANUBE_DMA_RX, 0, DANUBE_DMA_CH16_INT, 0},
|
||||
{"MCTRL0", DANUBE_DMA_TX, 0, DANUBE_DMA_CH17_INT, 0},
|
||||
{"MCTRL1", DANUBE_DMA_RX, 1, DANUBE_DMA_CH18_INT, 1},
|
||||
{"MCTRL1", DANUBE_DMA_TX, 1, DANUBE_DMA_CH19_INT, 1}
|
||||
};
|
||||
|
||||
_dma_chan_map *chan_map = default_dma_map;
|
||||
volatile u32 g_danube_dma_int_status = 0;
|
||||
volatile int g_danube_dma_in_process = 0;/*0=not in process,1=in process*/
|
||||
|
||||
void do_dma_tasklet (unsigned long);
|
||||
DECLARE_TASKLET (dma_tasklet, do_dma_tasklet, 0);
|
||||
|
||||
u8*
|
||||
common_buffer_alloc (int len, int *byte_offset, void **opt)
|
||||
{
|
||||
u8 *buffer = (u8 *) kmalloc (len * sizeof (u8), GFP_KERNEL);
|
||||
|
||||
*byte_offset = 0;
|
||||
|
||||
return buffer;
|
||||
}
|
||||
|
||||
void
|
||||
common_buffer_free (u8 *dataptr, void *opt)
|
||||
{
|
||||
if (dataptr)
|
||||
kfree(dataptr);
|
||||
}
|
||||
|
||||
void
|
||||
enable_ch_irq (_dma_channel_info *pCh)
|
||||
{
|
||||
int chan_no = (int)(pCh - dma_chan);
|
||||
int flag;
|
||||
|
||||
local_irq_save(flag);
|
||||
writel(chan_no, DANUBE_DMA_CS);
|
||||
writel(0x4a, DANUBE_DMA_CIE);
|
||||
writel(readl(DANUBE_DMA_IRNEN) | (1 << chan_no), DANUBE_DMA_IRNEN);
|
||||
local_irq_restore(flag);
|
||||
enable_danube_irq(pCh->irq);
|
||||
}
|
||||
|
||||
void
|
||||
disable_ch_irq (_dma_channel_info *pCh)
|
||||
{
|
||||
int flag;
|
||||
int chan_no = (int) (pCh - dma_chan);
|
||||
|
||||
local_irq_save(flag);
|
||||
g_danube_dma_int_status &= ~(1 << chan_no);
|
||||
writel(chan_no, DANUBE_DMA_CS);
|
||||
writel(0, DANUBE_DMA_CIE);
|
||||
writel(readl(DANUBE_DMA_IRNEN) & ~(1 << chan_no), DANUBE_DMA_IRNEN);
|
||||
local_irq_restore(flag);
|
||||
mask_and_ack_danube_irq(pCh->irq);
|
||||
}
|
||||
|
||||
void
|
||||
open_chan (_dma_channel_info *pCh)
|
||||
{
|
||||
int flag;
|
||||
int chan_no = (int)(pCh - dma_chan);
|
||||
|
||||
local_irq_save(flag);
|
||||
writel(chan_no, DANUBE_DMA_CS);
|
||||
writel(readl(DANUBE_DMA_CCTRL) | 1, DANUBE_DMA_CCTRL);
|
||||
if(pCh->dir == DANUBE_DMA_RX)
|
||||
enable_ch_irq(pCh);
|
||||
local_irq_restore(flag);
|
||||
}
|
||||
|
||||
void
|
||||
close_chan(_dma_channel_info *pCh)
|
||||
{
|
||||
int flag;
|
||||
int chan_no = (int) (pCh - dma_chan);
|
||||
|
||||
local_irq_save(flag);
|
||||
writel(chan_no, DANUBE_DMA_CS);
|
||||
writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
|
||||
disable_ch_irq(pCh);
|
||||
local_irq_restore(flag);
|
||||
}
|
||||
|
||||
void
|
||||
reset_chan (_dma_channel_info *pCh)
|
||||
{
|
||||
int chan_no = (int) (pCh - dma_chan);
|
||||
|
||||
writel(chan_no, DANUBE_DMA_CS);
|
||||
writel(readl(DANUBE_DMA_CCTRL) | 2, DANUBE_DMA_CCTRL);
|
||||
}
|
||||
|
||||
void
|
||||
rx_chan_intr_handler (int chan_no)
|
||||
{
|
||||
_dma_device_info *pDev = (_dma_device_info *)dma_chan[chan_no].dma_dev;
|
||||
_dma_channel_info *pCh = &dma_chan[chan_no];
|
||||
struct rx_desc *rx_desc_p;
|
||||
int tmp;
|
||||
int flag;
|
||||
|
||||
/*handle command complete interrupt */
|
||||
rx_desc_p = (struct rx_desc*)pCh->desc_base + pCh->curr_desc;
|
||||
if (rx_desc_p->status.field.OWN == CPU_OWN
|
||||
&& rx_desc_p->status.field.C
|
||||
&& rx_desc_p->status.field.data_length < 1536){
|
||||
/*Every thing is correct, then we inform the upper layer */
|
||||
pDev->current_rx_chan = pCh->rel_chan_no;
|
||||
if(pDev->intr_handler)
|
||||
pDev->intr_handler(pDev, RCV_INT);
|
||||
pCh->weight--;
|
||||
} else {
|
||||
local_irq_save(flag);
|
||||
tmp = readl(DANUBE_DMA_CS);
|
||||
writel(chan_no, DANUBE_DMA_CS);
|
||||
writel(readl(DANUBE_DMA_CIS) | 0x7e, DANUBE_DMA_CIS);
|
||||
writel(tmp, DANUBE_DMA_CS);
|
||||
g_danube_dma_int_status &= ~(1 << chan_no);
|
||||
local_irq_restore(flag);
|
||||
enable_danube_irq(dma_chan[chan_no].irq);
|
||||
}
|
||||
}
|
||||
|
||||
inline void
|
||||
tx_chan_intr_handler (int chan_no)
|
||||
{
|
||||
_dma_device_info *pDev = (_dma_device_info*)dma_chan[chan_no].dma_dev;
|
||||
_dma_channel_info *pCh = &dma_chan[chan_no];
|
||||
int tmp;
|
||||
int flag;
|
||||
|
||||
local_irq_save(flag);
|
||||
tmp = readl(DANUBE_DMA_CS);
|
||||
writel(chan_no, DANUBE_DMA_CS);
|
||||
writel(readl(DANUBE_DMA_CIS) | 0x7e, DANUBE_DMA_CIS);
|
||||
writel(tmp, DANUBE_DMA_CS);
|
||||
g_danube_dma_int_status &= ~(1 << chan_no);
|
||||
local_irq_restore(flag);
|
||||
pDev->current_tx_chan = pCh->rel_chan_no;
|
||||
if (pDev->intr_handler)
|
||||
pDev->intr_handler(pDev, TRANSMIT_CPT_INT);
|
||||
}
|
||||
|
||||
void
|
||||
do_dma_tasklet (unsigned long unused)
|
||||
{
|
||||
int i;
|
||||
int chan_no = 0;
|
||||
int budget = DMA_INT_BUDGET;
|
||||
int weight = 0;
|
||||
int flag;
|
||||
|
||||
while (g_danube_dma_int_status)
|
||||
{
|
||||
if (budget-- < 0)
|
||||
{
|
||||
tasklet_schedule(&dma_tasklet);
|
||||
return;
|
||||
}
|
||||
chan_no = -1;
|
||||
weight = 0;
|
||||
for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
|
||||
{
|
||||
if ((g_danube_dma_int_status & (1 << i)) && dma_chan[i].weight > 0)
|
||||
{
|
||||
if (dma_chan[i].weight > weight)
|
||||
{
|
||||
chan_no = i;
|
||||
weight = dma_chan[chan_no].weight;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
if (chan_no >= 0)
|
||||
{
|
||||
if (chan_map[chan_no].dir == DANUBE_DMA_RX)
|
||||
rx_chan_intr_handler(chan_no);
|
||||
else
|
||||
tx_chan_intr_handler(chan_no);
|
||||
} else {
|
||||
for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
|
||||
{
|
||||
dma_chan[i].weight = dma_chan[i].default_weight;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
local_irq_save(flag);
|
||||
g_danube_dma_in_process = 0;
|
||||
if (g_danube_dma_int_status)
|
||||
{
|
||||
g_danube_dma_in_process = 1;
|
||||
tasklet_schedule(&dma_tasklet);
|
||||
}
|
||||
local_irq_restore(flag);
|
||||
}
|
||||
|
||||
irqreturn_t
|
||||
dma_interrupt (int irq, void *dev_id)
|
||||
{
|
||||
_dma_channel_info *pCh;
|
||||
int chan_no = 0;
|
||||
int tmp;
|
||||
|
||||
pCh = (_dma_channel_info*)dev_id;
|
||||
chan_no = (int)(pCh - dma_chan);
|
||||
if (chan_no < 0 || chan_no > 19)
|
||||
BUG();
|
||||
|
||||
tmp = readl(DANUBE_DMA_IRNEN);
|
||||
writel(0, DANUBE_DMA_IRNEN);
|
||||
g_danube_dma_int_status |= 1 << chan_no;
|
||||
writel(tmp, DANUBE_DMA_IRNEN);
|
||||
mask_and_ack_danube_irq(irq);
|
||||
|
||||
if (!g_danube_dma_in_process)
|
||||
{
|
||||
g_danube_dma_in_process = 1;
|
||||
tasklet_schedule(&dma_tasklet);
|
||||
}
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
_dma_device_info*
|
||||
dma_device_reserve (char *dev_name)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < MAX_DMA_DEVICE_NUM; i++)
|
||||
{
|
||||
if (strcmp(dev_name, dma_devs[i].device_name) == 0)
|
||||
{
|
||||
if (dma_devs[i].reserved)
|
||||
return NULL;
|
||||
dma_devs[i].reserved = 1;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
return &dma_devs[i];
|
||||
}
|
||||
|
||||
void
|
||||
dma_device_release (_dma_device_info *dev)
|
||||
{
|
||||
dev->reserved = 0;
|
||||
}
|
||||
|
||||
void
|
||||
dma_device_register(_dma_device_info *dev)
|
||||
{
|
||||
int i, j;
|
||||
int chan_no = 0;
|
||||
u8 *buffer;
|
||||
int byte_offset;
|
||||
int flag;
|
||||
_dma_device_info *pDev;
|
||||
_dma_channel_info *pCh;
|
||||
struct rx_desc *rx_desc_p;
|
||||
struct tx_desc *tx_desc_p;
|
||||
|
||||
for (i = 0; i < dev->max_tx_chan_num; i++)
|
||||
{
|
||||
pCh = dev->tx_chan[i];
|
||||
if (pCh->control == DANUBE_DMA_CH_ON)
|
||||
{
|
||||
chan_no = (int)(pCh - dma_chan);
|
||||
for (j = 0; j < pCh->desc_len; j++)
|
||||
{
|
||||
tx_desc_p = (struct tx_desc*)pCh->desc_base + j;
|
||||
memset(tx_desc_p, 0, sizeof(struct tx_desc));
|
||||
}
|
||||
local_irq_save(flag);
|
||||
writel(chan_no, DANUBE_DMA_CS);
|
||||
/*check if the descriptor length is changed */
|
||||
if (readl(DANUBE_DMA_CDLEN) != pCh->desc_len)
|
||||
writel(pCh->desc_len, DANUBE_DMA_CDLEN);
|
||||
|
||||
writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
|
||||
writel(readl(DANUBE_DMA_CCTRL) | 2, DANUBE_DMA_CCTRL);
|
||||
while (readl(DANUBE_DMA_CCTRL) & 2){};
|
||||
writel(readl(DANUBE_DMA_IRNEN) | (1 << chan_no), DANUBE_DMA_IRNEN);
|
||||
writel(0x30100, DANUBE_DMA_CCTRL); /*reset and enable channel,enable channel later */
|
||||
local_irq_restore(flag);
|
||||
}
|
||||
}
|
||||
|
||||
for (i = 0; i < dev->max_rx_chan_num; i++)
|
||||
{
|
||||
pCh = dev->rx_chan[i];
|
||||
if (pCh->control == DANUBE_DMA_CH_ON)
|
||||
{
|
||||
chan_no = (int)(pCh - dma_chan);
|
||||
|
||||
for (j = 0; j < pCh->desc_len; j++)
|
||||
{
|
||||
rx_desc_p = (struct rx_desc*)pCh->desc_base + j;
|
||||
pDev = (_dma_device_info*)(pCh->dma_dev);
|
||||
buffer = pDev->buffer_alloc(pCh->packet_size, &byte_offset, (void*)&(pCh->opt[j]));
|
||||
if (!buffer)
|
||||
break;
|
||||
|
||||
dma_cache_inv((unsigned long) buffer, pCh->packet_size);
|
||||
|
||||
rx_desc_p->Data_Pointer = (u32)CPHYSADDR((u32)buffer);
|
||||
rx_desc_p->status.word = 0;
|
||||
rx_desc_p->status.field.byte_offset = byte_offset;
|
||||
rx_desc_p->status.field.OWN = DMA_OWN;
|
||||
rx_desc_p->status.field.data_length = pCh->packet_size;
|
||||
}
|
||||
|
||||
local_irq_save(flag);
|
||||
writel(chan_no, DANUBE_DMA_CS);
|
||||
/*check if the descriptor length is changed */
|
||||
if (readl(DANUBE_DMA_CDLEN) != pCh->desc_len)
|
||||
writel(pCh->desc_len, DANUBE_DMA_CDLEN);
|
||||
writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
|
||||
writel(readl(DANUBE_DMA_CCTRL) | 2, DANUBE_DMA_CCTRL);
|
||||
while (readl(DANUBE_DMA_CCTRL) & 2){};
|
||||
writel(0x0a, DANUBE_DMA_CIE); /*fix me, should enable all the interrupts here? */
|
||||
writel(readl(DANUBE_DMA_IRNEN) | (1 << chan_no), DANUBE_DMA_IRNEN);
|
||||
writel(0x30000, DANUBE_DMA_CCTRL);
|
||||
local_irq_restore(flag);
|
||||
enable_danube_irq(dma_chan[chan_no].irq);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void
|
||||
dma_device_unregister (_dma_device_info *dev)
|
||||
{
|
||||
int i, j;
|
||||
int chan_no;
|
||||
_dma_channel_info *pCh;
|
||||
struct rx_desc *rx_desc_p;
|
||||
struct tx_desc *tx_desc_p;
|
||||
int flag;
|
||||
|
||||
for (i = 0; i < dev->max_tx_chan_num; i++)
|
||||
{
|
||||
pCh = dev->tx_chan[i];
|
||||
if (pCh->control == DANUBE_DMA_CH_ON)
|
||||
{
|
||||
chan_no = (int)(dev->tx_chan[i] - dma_chan);
|
||||
local_irq_save (flag);
|
||||
writel(chan_no, DANUBE_DMA_CS);
|
||||
pCh->curr_desc = 0;
|
||||
pCh->prev_desc = 0;
|
||||
pCh->control = DANUBE_DMA_CH_OFF;
|
||||
writel(0, DANUBE_DMA_CIE); /*fix me, should disable all the interrupts here? */
|
||||
writel(readl(DANUBE_DMA_IRNEN) & ~(1 << chan_no), DANUBE_DMA_IRNEN); /*disable interrupts */
|
||||
writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
|
||||
while (readl(DANUBE_DMA_CCTRL) & 1) {};
|
||||
local_irq_restore (flag);
|
||||
|
||||
for (j = 0; j < pCh->desc_len; j++)
|
||||
{
|
||||
tx_desc_p = (struct tx_desc*)pCh->desc_base + j;
|
||||
if ((tx_desc_p->status.field.OWN == CPU_OWN && tx_desc_p->status.field.C)
|
||||
|| (tx_desc_p->status.field.OWN == DMA_OWN && tx_desc_p->status.field.data_length > 0))
|
||||
{
|
||||
dev->buffer_free ((u8 *) __va (tx_desc_p->Data_Pointer), (void*)pCh->opt[j]);
|
||||
}
|
||||
tx_desc_p->status.field.OWN = CPU_OWN;
|
||||
memset (tx_desc_p, 0, sizeof (struct tx_desc));
|
||||
}
|
||||
//TODO should free buffer that is not transferred by dma
|
||||
}
|
||||
}
|
||||
|
||||
for (i = 0; i < dev->max_rx_chan_num; i++)
|
||||
{
|
||||
pCh = dev->rx_chan[i];
|
||||
chan_no = (int)(dev->rx_chan[i] - dma_chan);
|
||||
disable_danube_irq(pCh->irq);
|
||||
|
||||
local_irq_save(flag);
|
||||
g_danube_dma_int_status &= ~(1 << chan_no);
|
||||
pCh->curr_desc = 0;
|
||||
pCh->prev_desc = 0;
|
||||
pCh->control = DANUBE_DMA_CH_OFF;
|
||||
|
||||
writel(chan_no, DANUBE_DMA_CS);
|
||||
writel(0, DANUBE_DMA_CIE); /*fix me, should disable all the interrupts here? */
|
||||
writel(readl(DANUBE_DMA_IRNEN) & ~(1 << chan_no), DANUBE_DMA_IRNEN); /*disable interrupts */
|
||||
writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
|
||||
while (readl(DANUBE_DMA_CCTRL) & 1) {};
|
||||
|
||||
local_irq_restore (flag);
|
||||
for (j = 0; j < pCh->desc_len; j++)
|
||||
{
|
||||
rx_desc_p = (struct rx_desc *) pCh->desc_base + j;
|
||||
if ((rx_desc_p->status.field.OWN == CPU_OWN
|
||||
&& rx_desc_p->status.field.C)
|
||||
|| (rx_desc_p->status.field.OWN == DMA_OWN
|
||||
&& rx_desc_p->status.field.data_length > 0)) {
|
||||
dev->buffer_free ((u8 *)
|
||||
__va (rx_desc_p->
|
||||
Data_Pointer),
|
||||
(void *) pCh->opt[j]);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
int
|
||||
dma_device_read (struct dma_device_info *dma_dev, u8 ** dataptr, void **opt)
|
||||
{
|
||||
u8 *buf;
|
||||
int len;
|
||||
int byte_offset = 0;
|
||||
void *p = NULL;
|
||||
_dma_channel_info *pCh = dma_dev->rx_chan[dma_dev->current_rx_chan];
|
||||
struct rx_desc *rx_desc_p;
|
||||
|
||||
/*get the rx data first */
|
||||
rx_desc_p = (struct rx_desc *) pCh->desc_base + pCh->curr_desc;
|
||||
if (!(rx_desc_p->status.field.OWN == CPU_OWN && rx_desc_p->status.field.C))
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
buf = (u8 *) __va (rx_desc_p->Data_Pointer);
|
||||
*(u32*)dataptr = (u32)buf;
|
||||
len = rx_desc_p->status.field.data_length;
|
||||
|
||||
if (opt)
|
||||
{
|
||||
*(int*)opt = (int)pCh->opt[pCh->curr_desc];
|
||||
}
|
||||
|
||||
/*replace with a new allocated buffer */
|
||||
buf = dma_dev->buffer_alloc(pCh->packet_size, &byte_offset, &p);
|
||||
|
||||
if (buf)
|
||||
{
|
||||
dma_cache_inv ((unsigned long) buf,
|
||||
pCh->packet_size);
|
||||
pCh->opt[pCh->curr_desc] = p;
|
||||
wmb ();
|
||||
|
||||
rx_desc_p->Data_Pointer = (u32) CPHYSADDR ((u32) buf);
|
||||
rx_desc_p->status.word = (DMA_OWN << 31) | ((byte_offset) << 23) | pCh->packet_size;
|
||||
wmb ();
|
||||
} else {
|
||||
*(u32 *) dataptr = 0;
|
||||
if (opt)
|
||||
*(int *) opt = 0;
|
||||
len = 0;
|
||||
}
|
||||
|
||||
/*increase the curr_desc pointer */
|
||||
pCh->curr_desc++;
|
||||
if (pCh->curr_desc == pCh->desc_len)
|
||||
pCh->curr_desc = 0;
|
||||
|
||||
return len;
|
||||
}
|
||||
|
||||
int
|
||||
dma_device_write (struct dma_device_info *dma_dev, u8 * dataptr, int len, void *opt)
|
||||
{
|
||||
int flag;
|
||||
u32 tmp, byte_offset;
|
||||
_dma_channel_info *pCh;
|
||||
int chan_no;
|
||||
struct tx_desc *tx_desc_p;
|
||||
local_irq_save (flag);
|
||||
|
||||
pCh = dma_dev->tx_chan[dma_dev->current_tx_chan];
|
||||
chan_no = (int)(pCh - (_dma_channel_info *) dma_chan);
|
||||
|
||||
tx_desc_p = (struct tx_desc*)pCh->desc_base + pCh->prev_desc;
|
||||
while (tx_desc_p->status.field.OWN == CPU_OWN && tx_desc_p->status.field.C)
|
||||
{
|
||||
dma_dev->buffer_free((u8 *) __va (tx_desc_p->Data_Pointer), pCh->opt[pCh->prev_desc]);
|
||||
memset(tx_desc_p, 0, sizeof (struct tx_desc));
|
||||
pCh->prev_desc = (pCh->prev_desc + 1) % (pCh->desc_len);
|
||||
tx_desc_p = (struct tx_desc*)pCh->desc_base + pCh->prev_desc;
|
||||
}
|
||||
tx_desc_p = (struct tx_desc*)pCh->desc_base + pCh->curr_desc;
|
||||
/*Check whether this descriptor is available */
|
||||
if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C)
|
||||
{
|
||||
/*if not , the tell the upper layer device */
|
||||
dma_dev->intr_handler (dma_dev, TX_BUF_FULL_INT);
|
||||
local_irq_restore(flag);
|
||||
printk (KERN_INFO "%s %d: failed to write!\n", __func__, __LINE__);
|
||||
|
||||
return 0;
|
||||
}
|
||||
pCh->opt[pCh->curr_desc] = opt;
|
||||
/*byte offset----to adjust the starting address of the data buffer, should be multiple of the burst length. */
|
||||
byte_offset = ((u32) CPHYSADDR ((u32) dataptr)) % ((dma_dev->tx_burst_len) * 4);
|
||||
dma_cache_wback ((unsigned long) dataptr, len);
|
||||
wmb ();
|
||||
tx_desc_p->Data_Pointer = (u32) CPHYSADDR ((u32) dataptr) - byte_offset;
|
||||
wmb ();
|
||||
tx_desc_p->status.word = (DMA_OWN << 31) | DMA_DESC_SOP_SET | DMA_DESC_EOP_SET | ((byte_offset) << 23) | len;
|
||||
wmb ();
|
||||
|
||||
pCh->curr_desc++;
|
||||
if (pCh->curr_desc == pCh->desc_len)
|
||||
pCh->curr_desc = 0;
|
||||
|
||||
/*Check whether this descriptor is available */
|
||||
tx_desc_p = (struct tx_desc *) pCh->desc_base + pCh->curr_desc;
|
||||
if (tx_desc_p->status.field.OWN == DMA_OWN)
|
||||
{
|
||||
/*if not , the tell the upper layer device */
|
||||
dma_dev->intr_handler (dma_dev, TX_BUF_FULL_INT);
|
||||
}
|
||||
|
||||
writel(chan_no, DANUBE_DMA_CS);
|
||||
tmp = readl(DANUBE_DMA_CCTRL);
|
||||
|
||||
if (!(tmp & 1))
|
||||
pCh->open (pCh);
|
||||
|
||||
local_irq_restore (flag);
|
||||
|
||||
return len;
|
||||
}
|
||||
|
||||
int
|
||||
map_dma_chan(_dma_chan_map *map)
|
||||
{
|
||||
int i, j;
|
||||
int result;
|
||||
|
||||
for (i = 0; i < MAX_DMA_DEVICE_NUM; i++)
|
||||
{
|
||||
strcpy(dma_devs[i].device_name, global_device_name[i]);
|
||||
}
|
||||
|
||||
for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
|
||||
{
|
||||
dma_chan[i].irq = map[i].irq;
|
||||
result = request_irq(dma_chan[i].irq, dma_interrupt, SA_INTERRUPT, "dma-core", (void*)&dma_chan[i]);
|
||||
if (result)
|
||||
{
|
||||
printk("error, cannot get dma_irq!\n");
|
||||
free_irq(dma_chan[i].irq, (void *) &dma_interrupt);
|
||||
|
||||
return -EFAULT;
|
||||
}
|
||||
}
|
||||
|
||||
for (i = 0; i < MAX_DMA_DEVICE_NUM; i++)
|
||||
{
|
||||
dma_devs[i].num_tx_chan = 0; /*set default tx channel number to be one */
|
||||
dma_devs[i].num_rx_chan = 0; /*set default rx channel number to be one */
|
||||
dma_devs[i].max_rx_chan_num = 0;
|
||||
dma_devs[i].max_tx_chan_num = 0;
|
||||
dma_devs[i].buffer_alloc = &common_buffer_alloc;
|
||||
dma_devs[i].buffer_free = &common_buffer_free;
|
||||
dma_devs[i].intr_handler = NULL;
|
||||
dma_devs[i].tx_burst_len = 4;
|
||||
dma_devs[i].rx_burst_len = 4;
|
||||
if (i == 0)
|
||||
{
|
||||
writel(0, DANUBE_DMA_PS);
|
||||
writel(readl(DANUBE_DMA_PCTRL) | ((0xf << 8) | (1 << 6)), DANUBE_DMA_PCTRL); /*enable dma drop */
|
||||
}
|
||||
|
||||
if (i == 1)
|
||||
{
|
||||
writel(1, DANUBE_DMA_PS);
|
||||
writel(0x14, DANUBE_DMA_PCTRL); /*deu port setting */
|
||||
}
|
||||
|
||||
for (j = 0; j < MAX_DMA_CHANNEL_NUM; j++)
|
||||
{
|
||||
dma_chan[j].byte_offset = 0;
|
||||
dma_chan[j].open = &open_chan;
|
||||
dma_chan[j].close = &close_chan;
|
||||
dma_chan[j].reset = &reset_chan;
|
||||
dma_chan[j].enable_irq = &enable_ch_irq;
|
||||
dma_chan[j].disable_irq = &disable_ch_irq;
|
||||
dma_chan[j].rel_chan_no = map[j].rel_chan_no;
|
||||
dma_chan[j].control = DANUBE_DMA_CH_OFF;
|
||||
dma_chan[j].default_weight = DANUBE_DMA_CH_DEFAULT_WEIGHT;
|
||||
dma_chan[j].weight = dma_chan[j].default_weight;
|
||||
dma_chan[j].curr_desc = 0;
|
||||
dma_chan[j].prev_desc = 0;
|
||||
}
|
||||
|
||||
for (j = 0; j < MAX_DMA_CHANNEL_NUM; j++)
|
||||
{
|
||||
if (strcmp(dma_devs[i].device_name, map[j].dev_name) == 0)
|
||||
{
|
||||
if (map[j].dir == DANUBE_DMA_RX)
|
||||
{
|
||||
dma_chan[j].dir = DANUBE_DMA_RX;
|
||||
dma_devs[i].max_rx_chan_num++;
|
||||
dma_devs[i].rx_chan[dma_devs[i].max_rx_chan_num - 1] = &dma_chan[j];
|
||||
dma_devs[i].rx_chan[dma_devs[i].max_rx_chan_num - 1]->pri = map[j].pri;
|
||||
dma_chan[j].dma_dev = (void*)&dma_devs[i];
|
||||
} else if(map[j].dir == DANUBE_DMA_TX)
|
||||
{ /*TX direction */
|
||||
dma_chan[j].dir = DANUBE_DMA_TX;
|
||||
dma_devs[i].max_tx_chan_num++;
|
||||
dma_devs[i].tx_chan[dma_devs[i].max_tx_chan_num - 1] = &dma_chan[j];
|
||||
dma_devs[i].tx_chan[dma_devs[i].max_tx_chan_num - 1]->pri = map[j].pri;
|
||||
dma_chan[j].dma_dev = (void*)&dma_devs[i];
|
||||
} else {
|
||||
printk ("WRONG DMA MAP!\n");
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void
|
||||
dma_chip_init(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
// enable DMA from PMU
|
||||
writel(readl(DANUBE_PMU_PWDCR) & ~DANUBE_PMU_PWDCR_DMA, DANUBE_PMU_PWDCR);
|
||||
|
||||
// reset DMA
|
||||
writel(readl(DANUBE_DMA_CTRL) | 1, DANUBE_DMA_CTRL);
|
||||
|
||||
// diable all interrupts
|
||||
writel(0, DANUBE_DMA_IRNEN);
|
||||
|
||||
for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
|
||||
{
|
||||
writel(i, DANUBE_DMA_CS);
|
||||
writel(0x2, DANUBE_DMA_CCTRL);
|
||||
writel(0x80000040, DANUBE_DMA_CPOLL);
|
||||
writel(readl(DANUBE_DMA_CCTRL) & ~0x1, DANUBE_DMA_CCTRL);
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
int
|
||||
danube_dma_init (void)
|
||||
{
|
||||
int i;
|
||||
|
||||
dma_chip_init();
|
||||
if (map_dma_chan(default_dma_map))
|
||||
BUG();
|
||||
|
||||
g_desc_list = (u64*)KSEG1ADDR(__get_free_page(GFP_DMA));
|
||||
|
||||
if (g_desc_list == NULL)
|
||||
{
|
||||
printk("no memory for desriptor\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
memset(g_desc_list, 0, PAGE_SIZE);
|
||||
|
||||
for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
|
||||
{
|
||||
dma_chan[i].desc_base = (u32)g_desc_list + i * DANUBE_DMA_DESCRIPTOR_OFFSET * 8;
|
||||
dma_chan[i].curr_desc = 0;
|
||||
dma_chan[i].desc_len = DANUBE_DMA_DESCRIPTOR_OFFSET;
|
||||
|
||||
writel(i, DANUBE_DMA_CS);
|
||||
writel((u32)CPHYSADDR(dma_chan[i].desc_base), DANUBE_DMA_CDBA);
|
||||
writel(dma_chan[i].desc_len, DANUBE_DMA_CDLEN);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
arch_initcall(danube_dma_init);
|
||||
|
||||
void
|
||||
dma_cleanup(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
free_page(KSEG0ADDR((unsigned long) g_desc_list));
|
||||
for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
|
||||
free_irq(dma_chan[i].irq, (void*)&dma_interrupt);
|
||||
}
|
||||
|
||||
EXPORT_SYMBOL (dma_device_reserve);
|
||||
EXPORT_SYMBOL (dma_device_release);
|
||||
EXPORT_SYMBOL (dma_device_register);
|
||||
EXPORT_SYMBOL (dma_device_unregister);
|
||||
EXPORT_SYMBOL (dma_device_read);
|
||||
EXPORT_SYMBOL (dma_device_write);
|
||||
|
||||
MODULE_LICENSE ("GPL");
|
||||
219
target/linux/danube/files/arch/mips/danube/interrupt.c
Normal file
219
target/linux/danube/files/arch/mips/danube/interrupt.c
Normal file
@ -0,0 +1,219 @@
|
||||
/*
|
||||
* arch/mips/danube/interrupt.c
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
|
||||
*
|
||||
* Copyright (C) 2005 Wu Qi Ming infineon
|
||||
*
|
||||
* Rewrite of Infineon Danube code, thanks to infineon for the support,
|
||||
* software and hardware
|
||||
*
|
||||
* Copyright (C) 2007 John Crispin <blogic@openwrt.org>
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/kernel_stat.h>
|
||||
#include <linux/module.h>
|
||||
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/danube/danube.h>
|
||||
#include <asm/danube/danube_irq.h>
|
||||
#include <asm/irq_cpu.h>
|
||||
|
||||
|
||||
void
|
||||
disable_danube_irq (unsigned int irq_nr)
|
||||
{
|
||||
int i;
|
||||
u32 *danube_ier = DANUBE_ICU_IM0_IER;
|
||||
|
||||
irq_nr -= INT_NUM_IRQ0;
|
||||
for (i = 0; i <= 4; i++)
|
||||
{
|
||||
if (irq_nr < INT_NUM_IM_OFFSET){
|
||||
writel(readl(danube_ier) & ~(1 << irq_nr ), danube_ier);
|
||||
return;
|
||||
}
|
||||
danube_ier += DANUBE_ICU_OFFSET;
|
||||
irq_nr -= INT_NUM_IM_OFFSET;
|
||||
}
|
||||
}
|
||||
EXPORT_SYMBOL (disable_danube_irq);
|
||||
|
||||
void
|
||||
mask_and_ack_danube_irq (unsigned int irq_nr)
|
||||
{
|
||||
int i;
|
||||
u32 *danube_ier = DANUBE_ICU_IM0_IER;
|
||||
u32 *danube_isr = DANUBE_ICU_IM0_ISR;
|
||||
|
||||
irq_nr -= INT_NUM_IRQ0;
|
||||
for (i = 0; i <= 4; i++)
|
||||
{
|
||||
if (irq_nr < INT_NUM_IM_OFFSET)
|
||||
{
|
||||
writel(readl(danube_ier) & ~(1 << irq_nr ), danube_ier);
|
||||
writel((1 << irq_nr ), danube_isr);
|
||||
return;
|
||||
}
|
||||
danube_ier += DANUBE_ICU_OFFSET;
|
||||
danube_isr += DANUBE_ICU_OFFSET;
|
||||
irq_nr -= INT_NUM_IM_OFFSET;
|
||||
}
|
||||
}
|
||||
EXPORT_SYMBOL (mask_and_ack_danube_irq);
|
||||
|
||||
void
|
||||
enable_danube_irq (unsigned int irq_nr)
|
||||
{
|
||||
int i;
|
||||
u32 *danube_ier = DANUBE_ICU_IM0_IER;
|
||||
|
||||
irq_nr -= INT_NUM_IRQ0;
|
||||
for (i = 0; i <= 4; i++)
|
||||
{
|
||||
if (irq_nr < INT_NUM_IM_OFFSET)
|
||||
{
|
||||
writel(readl(danube_ier) | (1 << irq_nr ), danube_ier);
|
||||
return;
|
||||
}
|
||||
danube_ier += DANUBE_ICU_OFFSET;
|
||||
irq_nr -= INT_NUM_IM_OFFSET;
|
||||
}
|
||||
}
|
||||
EXPORT_SYMBOL (enable_danube_irq);
|
||||
|
||||
static unsigned int
|
||||
startup_danube_irq (unsigned int irq)
|
||||
{
|
||||
enable_danube_irq (irq);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
end_danube_irq (unsigned int irq)
|
||||
{
|
||||
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
|
||||
enable_danube_irq (irq);
|
||||
}
|
||||
|
||||
static struct hw_interrupt_type danube_irq_type = {
|
||||
"DANUBE",
|
||||
.startup = startup_danube_irq,
|
||||
.enable = enable_danube_irq,
|
||||
.disable = disable_danube_irq,
|
||||
.unmask = enable_danube_irq,
|
||||
.ack = end_danube_irq,
|
||||
.mask = disable_danube_irq,
|
||||
.mask_ack = mask_and_ack_danube_irq,
|
||||
.end = end_danube_irq,
|
||||
};
|
||||
|
||||
static inline int
|
||||
ls1bit32(unsigned long x)
|
||||
{
|
||||
__asm__ (
|
||||
" .set push \n"
|
||||
" .set mips32 \n"
|
||||
" clz %0, %1 \n"
|
||||
" .set pop \n"
|
||||
: "=r" (x)
|
||||
: "r" (x));
|
||||
|
||||
return 31 - x;
|
||||
}
|
||||
|
||||
void
|
||||
danube_hw_irqdispatch (int module)
|
||||
{
|
||||
u32 irq;
|
||||
|
||||
irq = readl(DANUBE_ICU_IM0_IOSR + (module * DANUBE_ICU_OFFSET));
|
||||
if (irq == 0)
|
||||
return;
|
||||
|
||||
irq = ls1bit32 (irq);
|
||||
do_IRQ ((int) irq + INT_NUM_IM0_IRL0 + (INT_NUM_IM_OFFSET * module));
|
||||
|
||||
if ((irq == 22) && (module == 0)){
|
||||
writel(readl(DANUBE_EBU_PCC_ISTAT) | 0x10, DANUBE_EBU_PCC_ISTAT);
|
||||
}
|
||||
}
|
||||
|
||||
asmlinkage void
|
||||
plat_irq_dispatch (void)
|
||||
{
|
||||
unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
|
||||
unsigned int i;
|
||||
|
||||
if (pending & CAUSEF_IP7){
|
||||
do_IRQ(MIPS_CPU_TIMER_IRQ);
|
||||
goto out;
|
||||
} else {
|
||||
for (i = 0; i < 5; i++)
|
||||
{
|
||||
if (pending & (CAUSEF_IP2 << i))
|
||||
{
|
||||
danube_hw_irqdispatch(i);
|
||||
goto out;
|
||||
}
|
||||
}
|
||||
}
|
||||
printk("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status());
|
||||
|
||||
out:
|
||||
return;
|
||||
}
|
||||
|
||||
static struct irqaction cascade = {
|
||||
.handler = no_action,
|
||||
.flags = IRQF_DISABLED,
|
||||
.name = "cascade",
|
||||
};
|
||||
|
||||
void __init
|
||||
arch_init_irq(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < 5; i++)
|
||||
{
|
||||
writel(0, DANUBE_ICU_IM0_IER + (i * DANUBE_ICU_OFFSET));
|
||||
}
|
||||
|
||||
mips_cpu_irq_init();
|
||||
|
||||
for (i = 2; i <= 6; i++)
|
||||
{
|
||||
setup_irq(i, &cascade);
|
||||
}
|
||||
|
||||
for (i = INT_NUM_IRQ0; i <= (INT_NUM_IRQ0 + (5 * INT_NUM_IM_OFFSET)); i++)
|
||||
{
|
||||
#if 0
|
||||
irq_desc[i].status = IRQ_DISABLED;
|
||||
irq_desc[i].action = NULL;
|
||||
irq_desc[i].depth = 1;
|
||||
#endif
|
||||
set_irq_chip_and_handler(i, &danube_irq_type, handle_level_irq);
|
||||
}
|
||||
|
||||
set_c0_status (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
|
||||
}
|
||||
304
target/linux/danube/files/arch/mips/danube/pci.c
Normal file
304
target/linux/danube/files/arch/mips/danube/pci.c
Normal file
@ -0,0 +1,304 @@
|
||||
#include <linux/types.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/mm.h>
|
||||
#include <asm/danube/danube.h>
|
||||
#include <asm/danube/danube_irq.h>
|
||||
#include <asm/addrspace.h>
|
||||
#include <linux/vmalloc.h>
|
||||
|
||||
#define DANUBE_PCI_MEM_BASE 0x18000000
|
||||
#define DANUBE_PCI_MEM_SIZE 0x02000000
|
||||
#define DANUBE_PCI_IO_BASE 0x1AE00000
|
||||
#define DANUBE_PCI_IO_SIZE 0x00200000
|
||||
|
||||
#define DANUBE_PCI_CFG_BUSNUM_SHF 16
|
||||
#define DANUBE_PCI_CFG_DEVNUM_SHF 11
|
||||
#define DANUBE_PCI_CFG_FUNNUM_SHF 8
|
||||
|
||||
#define PCI_ACCESS_READ 0
|
||||
#define PCI_ACCESS_WRITE 1
|
||||
|
||||
static int danube_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
|
||||
static int danube_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
|
||||
|
||||
struct pci_ops danube_pci_ops = {
|
||||
.read = danube_pci_read_config_dword,
|
||||
.write = danube_pci_write_config_dword
|
||||
};
|
||||
|
||||
static struct resource pci_io_resource = {
|
||||
.name = "io pci IO space",
|
||||
.start = DANUBE_PCI_IO_BASE,
|
||||
.end = DANUBE_PCI_IO_BASE + DANUBE_PCI_IO_SIZE - 1,
|
||||
.flags = IORESOURCE_IO
|
||||
};
|
||||
|
||||
static struct resource pci_mem_resource = {
|
||||
.name = "ext pci memory space",
|
||||
.start = DANUBE_PCI_MEM_BASE,
|
||||
.end = DANUBE_PCI_MEM_BASE + DANUBE_PCI_MEM_SIZE - 1,
|
||||
.flags = IORESOURCE_MEM
|
||||
};
|
||||
|
||||
static struct pci_controller danube_pci_controller = {
|
||||
.pci_ops = &danube_pci_ops,
|
||||
.mem_resource = &pci_mem_resource,
|
||||
.mem_offset = 0x00000000UL,
|
||||
.io_resource = &pci_io_resource,
|
||||
.io_offset = 0x00000000UL,
|
||||
};
|
||||
|
||||
static u32 danube_pci_mapped_cfg;
|
||||
|
||||
static int
|
||||
danube_pci_config_access(unsigned char access_type,
|
||||
struct pci_bus *bus, unsigned int devfn, unsigned int where, u32 *data)
|
||||
{
|
||||
unsigned long cfg_base;
|
||||
unsigned long flags;
|
||||
|
||||
u32 temp;
|
||||
|
||||
/* Danube support slot from 0 to 15 */
|
||||
/* dev_fn 0&0x68 (AD29) is danube itself */
|
||||
if ((bus->number != 0) || ((devfn & 0xf8) > 0x78)
|
||||
|| ((devfn & 0xf8) == 0) || ((devfn & 0xf8) == 0x68))
|
||||
return 1;
|
||||
|
||||
local_irq_save(flags);
|
||||
|
||||
cfg_base = danube_pci_mapped_cfg;
|
||||
cfg_base |= (bus->number << DANUBE_PCI_CFG_BUSNUM_SHF) | (devfn <<
|
||||
DANUBE_PCI_CFG_FUNNUM_SHF) | (where & ~0x3);
|
||||
|
||||
/* Perform access */
|
||||
if (access_type == PCI_ACCESS_WRITE)
|
||||
{
|
||||
writel(*data, ((u32*)cfg_base));
|
||||
} else {
|
||||
*data = readl(((u32*)(cfg_base)));
|
||||
}
|
||||
wmb();
|
||||
|
||||
/* clean possible Master abort */
|
||||
cfg_base = (danube_pci_mapped_cfg | (0x0 << DANUBE_PCI_CFG_FUNNUM_SHF)) + 4;
|
||||
temp = readl(((u32*)(cfg_base)));
|
||||
cfg_base = (danube_pci_mapped_cfg | (0x68 << DANUBE_PCI_CFG_FUNNUM_SHF)) + 4;
|
||||
writel(temp, ((u32*)cfg_base));
|
||||
|
||||
local_irq_restore(flags);
|
||||
|
||||
if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ))
|
||||
return 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int danube_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn,
|
||||
int where, int size, u32 * val)
|
||||
{
|
||||
u32 data = 0;
|
||||
|
||||
if (danube_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
|
||||
return PCIBIOS_DEVICE_NOT_FOUND;
|
||||
|
||||
if (size == 1)
|
||||
*val = (data >> ((where & 3) << 3)) & 0xff;
|
||||
else if (size == 2)
|
||||
*val = (data >> ((where & 3) << 3)) & 0xffff;
|
||||
else
|
||||
*val = data;
|
||||
|
||||
return PCIBIOS_SUCCESSFUL;
|
||||
}
|
||||
|
||||
static int danube_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn,
|
||||
int where, int size, u32 val)
|
||||
{
|
||||
u32 data = 0;
|
||||
|
||||
if (size == 4)
|
||||
{
|
||||
data = val;
|
||||
} else {
|
||||
if (danube_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
|
||||
return PCIBIOS_DEVICE_NOT_FOUND;
|
||||
|
||||
if (size == 1)
|
||||
data = (data & ~(0xff << ((where & 3) << 3))) |
|
||||
(val << ((where & 3) << 3));
|
||||
else if (size == 2)
|
||||
data = (data & ~(0xffff << ((where & 3) << 3))) |
|
||||
(val << ((where & 3) << 3));
|
||||
}
|
||||
|
||||
if (danube_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
|
||||
return PCIBIOS_DEVICE_NOT_FOUND;
|
||||
|
||||
return PCIBIOS_SUCCESSFUL;
|
||||
}
|
||||
|
||||
|
||||
int pcibios_plat_dev_init(struct pci_dev *dev){
|
||||
u8 pin;
|
||||
|
||||
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
|
||||
|
||||
switch(pin) {
|
||||
case 0:
|
||||
break;
|
||||
case 1:
|
||||
//falling edge level triggered:0x4, low level:0xc, rising edge:0x2
|
||||
printk("%s:%s[%d] %08X \n", __FILE__, __func__, __LINE__, dev->irq);
|
||||
writel(readl(DANUBE_EBU_PCC_CON) | 0xc, DANUBE_EBU_PCC_CON);
|
||||
writel(readl(DANUBE_EBU_PCC_IEN) | 0x10, DANUBE_EBU_PCC_IEN);
|
||||
break;
|
||||
case 2:
|
||||
case 3:
|
||||
case 4:
|
||||
printk ("WARNING: interrupt pin %d not supported yet!\n", pin);
|
||||
default:
|
||||
printk ("WARNING: invalid interrupt pin %d\n", pin);
|
||||
return 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __init danube_pci_startup (void){
|
||||
/*initialize the first PCI device--danube itself */
|
||||
u32 temp_buffer;
|
||||
/*TODO: trigger reset */
|
||||
writel(readl(DANUBE_CGU_IFCCR) & ~0xf00000, DANUBE_CGU_IFCCR);
|
||||
writel(readl(DANUBE_CGU_IFCCR) | 0x800000, DANUBE_CGU_IFCCR);
|
||||
/* PCIS of IF_CLK of CGU : 1 =>PCI Clock output
|
||||
0 =>clock input
|
||||
PADsel of PCI_CR of CGU : 1 =>From CGU
|
||||
: 0 =>From pad
|
||||
*/
|
||||
writel(readl(DANUBE_CGU_IFCCR) | (1 << 16), DANUBE_CGU_IFCCR);
|
||||
writel((1 << 31) | (1 << 30), DANUBE_CGU_PCICR);
|
||||
|
||||
/* prepare GPIO */
|
||||
/* PCI_RST: P1.5 ALT 01 */
|
||||
//pliu20060613: start
|
||||
writel(readl(DANUBE_GPIO_P1_OUT) | (1 << 5), DANUBE_GPIO_P1_OUT);
|
||||
writel(readl(DANUBE_GPIO_P1_OD) | (1 << 5), DANUBE_GPIO_P1_OD);
|
||||
writel(readl(DANUBE_GPIO_P1_DIR) | (1 << 5), DANUBE_GPIO_P1_DIR);
|
||||
writel(readl(DANUBE_GPIO_P1_ALTSEL1) & ~(1 << 5), DANUBE_GPIO_P1_ALTSEL1);
|
||||
writel(readl(DANUBE_GPIO_P1_ALTSEL0) & ~(1 << 5), DANUBE_GPIO_P1_ALTSEL0);
|
||||
//pliu20060613: end
|
||||
/* PCI_REQ1: P1.13 ALT 01 */
|
||||
/* PCI_GNT1: P1.14 ALT 01 */
|
||||
writel(readl(DANUBE_GPIO_P1_DIR) & ~0x2000, DANUBE_GPIO_P1_DIR);
|
||||
writel(readl(DANUBE_GPIO_P1_DIR) | 0x4000, DANUBE_GPIO_P1_DIR);
|
||||
writel(readl(DANUBE_GPIO_P1_ALTSEL1) & ~0x6000, DANUBE_GPIO_P1_ALTSEL1);
|
||||
writel(readl(DANUBE_GPIO_P1_ALTSEL0) | 0x6000, DANUBE_GPIO_P1_ALTSEL0);
|
||||
/* PCI_REQ2: P1.15 ALT 10 */
|
||||
/* PCI_GNT2: P1.7 ALT 10 */
|
||||
|
||||
|
||||
/* enable auto-switching between PCI and EBU */
|
||||
writel(0xa, PCI_CR_CLK_CTRL);
|
||||
/* busy, i.e. configuration is not done, PCI access has to be retried */
|
||||
writel(readl(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
|
||||
wmb ();
|
||||
/* BUS Master/IO/MEM access */
|
||||
writel(readl(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
|
||||
|
||||
temp_buffer = readl(PCI_CR_PC_ARB);
|
||||
/* enable external 2 PCI masters */
|
||||
temp_buffer &= (~(0xf << 16));
|
||||
/* enable internal arbiter */
|
||||
temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
|
||||
/* enable internal PCI master reqest */
|
||||
temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
|
||||
|
||||
/* enable EBU reqest */
|
||||
temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
|
||||
|
||||
/* enable all external masters request */
|
||||
temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
|
||||
writel(temp_buffer, PCI_CR_PC_ARB);
|
||||
|
||||
wmb ();
|
||||
|
||||
/* FPI ==> PCI MEM address mapping */
|
||||
/* base: 0xb8000000 == > 0x18000000 */
|
||||
/* size: 8x4M = 32M */
|
||||
writel(0x18000000, PCI_CR_FCI_ADDR_MAP0);
|
||||
writel(0x18400000, PCI_CR_FCI_ADDR_MAP1);
|
||||
writel(0x18800000, PCI_CR_FCI_ADDR_MAP2);
|
||||
writel(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
|
||||
writel(0x19000000, PCI_CR_FCI_ADDR_MAP4);
|
||||
writel(0x19400000, PCI_CR_FCI_ADDR_MAP5);
|
||||
writel(0x19800000, PCI_CR_FCI_ADDR_MAP6);
|
||||
writel(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
|
||||
|
||||
/* FPI ==> PCI IO address mapping */
|
||||
/* base: 0xbAE00000 == > 0xbAE00000 */
|
||||
/* size: 2M */
|
||||
writel(0xbae00000, PCI_CR_FCI_ADDR_MAP11hg);
|
||||
|
||||
/* PCI ==> FPI address mapping */
|
||||
/* base: 0x0 ==> 0x0 */
|
||||
/* size: 32M */
|
||||
/* BAR1 32M map to SDR address */
|
||||
writel(0x0e000008, PCI_CR_BAR11MASK);
|
||||
writel(0, PCI_CR_PCI_ADDR_MAP11);
|
||||
writel(0, PCI_CS_BASE_ADDR1);
|
||||
/*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */
|
||||
// writel(readl(PCI_CR_BAR12MASK) | 0x80000000, PCI_CR_BAR12MASK);
|
||||
// writel(readl(PCI_CR_BAR13MASK) | 0x80000000, PCI_CR_BAR13MASK);
|
||||
/*use 8 dw burse length */
|
||||
writel(0x303, PCI_CR_FCI_BURST_LENGTH);
|
||||
|
||||
writel(readl(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
|
||||
wmb();
|
||||
writel(readl(DANUBE_GPIO_P1_OUT) & ~(1 << 5), DANUBE_GPIO_P1_OUT);
|
||||
wmb();
|
||||
mdelay (1);
|
||||
writel(readl(DANUBE_GPIO_P1_OUT) | (1 << 5), DANUBE_GPIO_P1_OUT);
|
||||
}
|
||||
|
||||
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){
|
||||
printk("\n\n\n%s:%s[%d] %d %d\n", __FILE__, __func__, __LINE__, slot, pin);
|
||||
switch (slot) {
|
||||
case 13:
|
||||
/* IDSEL = AD29 --> USB Host Controller */
|
||||
return (INT_NUM_IM1_IRL0 + 17);
|
||||
case 14:
|
||||
/* IDSEL = AD30 --> mini PCI connector */
|
||||
//return (INT_NUM_IM1_IRL0 + 14);
|
||||
return (INT_NUM_IM0_IRL0 + 22);
|
||||
default:
|
||||
printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin);
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
int pcibios_init(void){
|
||||
extern int pci_probe_only;
|
||||
|
||||
pci_probe_only = 0;
|
||||
printk ("PCI: Probing PCI hardware on host bus 0.\n");
|
||||
|
||||
danube_pci_startup ();
|
||||
|
||||
// DANUBE_PCI_REG32(PCI_CR_CLK_CTRL_REG) &= (~8);
|
||||
danube_pci_mapped_cfg = ioremap_nocache(0x17000000, 0x800 * 16);
|
||||
printk("Danube PCI mapped to 0x%08X\n", (unsigned long)danube_pci_mapped_cfg);
|
||||
|
||||
danube_pci_controller.io_map_base = (unsigned long)ioremap(DANUBE_PCI_IO_BASE, DANUBE_PCI_IO_SIZE - 1);
|
||||
|
||||
printk("Danube PCI I/O mapped to 0x%08X\n", (unsigned long)danube_pci_controller.io_map_base);
|
||||
|
||||
register_pci_controller(&danube_pci_controller);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
arch_initcall(pcibios_init);
|
||||
81
target/linux/danube/files/arch/mips/danube/prom.c
Normal file
81
target/linux/danube/files/arch/mips/danube/prom.c
Normal file
@ -0,0 +1,81 @@
|
||||
/*
|
||||
* arch/mips/danube/prom.c
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
|
||||
*
|
||||
* Copyright (C) 2005 Wu Qi Ming infineon
|
||||
*
|
||||
* Rewrite of Infineon Danube code, thanks to infineon for the support,
|
||||
* software and hardware
|
||||
*
|
||||
* Copyright (C) 2007 John Crispin <blogic@openwrt.org>
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/bootmem.h>
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/danube/danube.h>
|
||||
|
||||
static char buf[1024];
|
||||
|
||||
void
|
||||
prom_free_prom_memory (void)
|
||||
{
|
||||
}
|
||||
|
||||
const char *
|
||||
get_system_type (void)
|
||||
{
|
||||
return BOARD_SYSTEM_TYPE;
|
||||
}
|
||||
|
||||
void
|
||||
prom_putchar (char c)
|
||||
{
|
||||
while ((readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK) >> ASCFSTAT_TXFFLOFF);
|
||||
|
||||
if (c == '\n')
|
||||
writel('\r', DANUBE_ASC1_TBUF);
|
||||
writel(c, DANUBE_ASC1_TBUF);
|
||||
}
|
||||
|
||||
void
|
||||
prom_printf (const char * fmt, ...)
|
||||
{
|
||||
va_list args;
|
||||
int l;
|
||||
char *p, *buf_end;
|
||||
|
||||
va_start(args, fmt);
|
||||
l = vsprintf(buf, fmt, args);
|
||||
va_end(args);
|
||||
buf_end = buf + l;
|
||||
|
||||
for (p = buf; p < buf_end; p++)
|
||||
{
|
||||
prom_putchar(*p);
|
||||
}
|
||||
}
|
||||
|
||||
void __init
|
||||
prom_init(void)
|
||||
{
|
||||
mips_machgroup = MACH_GROUP_DANUBE;
|
||||
mips_machtype = MACH_INFINEON_DANUBE;
|
||||
|
||||
strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit");
|
||||
add_memory_region (0x00000000, 0x2000000, BOOT_MEM_RAM);
|
||||
}
|
||||
66
target/linux/danube/files/arch/mips/danube/reset.c
Normal file
66
target/linux/danube/files/arch/mips/danube/reset.c
Normal file
@ -0,0 +1,66 @@
|
||||
/*
|
||||
* arch/mips/danube/prom.c
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
|
||||
*
|
||||
* Copyright (C) 2005 infineon
|
||||
*
|
||||
* Rewrite of Infineon Danube code, thanks to infineon for the support,
|
||||
* software and hardware
|
||||
*
|
||||
* Copyright (C) 2007 John Crispin <blogic@openwrt.org>
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/pm.h>
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/system.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/danube/danube.h>
|
||||
|
||||
static void
|
||||
danube_machine_restart (char *command)
|
||||
{
|
||||
printk (KERN_NOTICE "System restart\n");
|
||||
local_irq_disable ();
|
||||
|
||||
writel(readl(DANUBE_RCU_REQ) | DANUBE_RST_ALL, DANUBE_RCU_REQ);
|
||||
for (;;);
|
||||
}
|
||||
|
||||
static void
|
||||
danube_machine_halt (void)
|
||||
{
|
||||
printk (KERN_NOTICE "System halted.\n");
|
||||
local_irq_disable ();
|
||||
for (;;);
|
||||
}
|
||||
|
||||
static void
|
||||
danube_machine_power_off (void)
|
||||
{
|
||||
printk (KERN_NOTICE "Please turn off the power now.\n");
|
||||
local_irq_disable ();
|
||||
for (;;);
|
||||
}
|
||||
|
||||
void
|
||||
danube_reboot_setup (void)
|
||||
{
|
||||
_machine_restart = danube_machine_restart;
|
||||
_machine_halt = danube_machine_halt;
|
||||
pm_power_off = danube_machine_power_off;
|
||||
}
|
||||
176
target/linux/danube/files/arch/mips/danube/setup.c
Normal file
176
target/linux/danube/files/arch/mips/danube/setup.c
Normal file
@ -0,0 +1,176 @@
|
||||
/*
|
||||
* arch/mips/danube/setup.c
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
|
||||
*
|
||||
* Copyright (C) 2004 peng.liu@infineon.com
|
||||
*
|
||||
* Rewrite of Infineon Danube code, thanks to infineon for the support,
|
||||
* software and hardware
|
||||
*
|
||||
* Copyright (C) 2007 John Crispin <blogic@openwrt.org>
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
|
||||
#include <asm/time.h>
|
||||
#include <asm/traps.h>
|
||||
#include <asm/cpu.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/danube/danube.h>
|
||||
#include <asm/danube/danube_irq.h>
|
||||
|
||||
static unsigned int r4k_offset; /* Amount to increment compare reg each time */
|
||||
static unsigned int r4k_cur; /* What counter should be at next timer irq */
|
||||
|
||||
extern void danube_reboot_setup (void);
|
||||
void prom_printf (const char * fmt, ...);
|
||||
|
||||
void
|
||||
__init bus_error_init (void)
|
||||
{
|
||||
/* nothing yet */
|
||||
}
|
||||
|
||||
unsigned int
|
||||
danube_get_ddr_hz (void)
|
||||
{
|
||||
switch (readl(DANUBE_CGU_SYS) & 0x3)
|
||||
{
|
||||
case 0:
|
||||
return CLOCK_167M;
|
||||
case 1:
|
||||
return CLOCK_133M;
|
||||
case 2:
|
||||
return CLOCK_111M;
|
||||
}
|
||||
return CLOCK_83M;
|
||||
}
|
||||
EXPORT_SYMBOL(danube_get_ddr_hz);
|
||||
|
||||
unsigned int
|
||||
danube_get_cpu_hz (void)
|
||||
{
|
||||
unsigned int ddr_clock = danube_get_ddr_hz();
|
||||
switch (readl(DANUBE_CGU_SYS) & 0xc)
|
||||
{
|
||||
case 0:
|
||||
return CLOCK_333M;
|
||||
case 4:
|
||||
return ddr_clock;
|
||||
}
|
||||
return ddr_clock << 1;
|
||||
}
|
||||
EXPORT_SYMBOL(danube_get_cpu_hz);
|
||||
|
||||
unsigned int
|
||||
danube_get_fpi_hz (void)
|
||||
{
|
||||
unsigned int ddr_clock = danube_get_ddr_hz();
|
||||
if (readl(DANUBE_CGU_SYS) & 0x40)
|
||||
{
|
||||
return ddr_clock >> 1;
|
||||
}
|
||||
return ddr_clock;
|
||||
}
|
||||
EXPORT_SYMBOL(danube_get_fpi_hz);
|
||||
|
||||
unsigned int
|
||||
danube_get_cpu_ver (void)
|
||||
{
|
||||
return readl(DANUBE_MCD_CHIPID) & 0xFFFFF000;
|
||||
}
|
||||
EXPORT_SYMBOL(danube_get_cpu_ver);
|
||||
|
||||
void
|
||||
danube_time_init (void)
|
||||
{
|
||||
mips_hpt_frequency = danube_get_cpu_hz() / 2;
|
||||
r4k_offset = mips_hpt_frequency / HZ;
|
||||
printk("mips_hpt_frequency:%d\n", mips_hpt_frequency);
|
||||
printk("r4k_offset: %08x(%d)\n", r4k_offset, r4k_offset);
|
||||
}
|
||||
|
||||
int
|
||||
danube_be_handler(struct pt_regs *regs, int is_fixup)
|
||||
{
|
||||
/*TODO*/
|
||||
printk(KERN_ERR "TODO: BUS error\n");
|
||||
|
||||
return MIPS_BE_FATAL;
|
||||
}
|
||||
|
||||
/* ISR GPTU Timer 6 for high resolution timer */
|
||||
static irqreturn_t
|
||||
danube_timer6_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
timer_interrupt(DANUBE_TIMER6_INT, NULL);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static struct irqaction hrt_irqaction = {
|
||||
.handler = danube_timer6_interrupt,
|
||||
.flags = IRQF_DISABLED,
|
||||
.name = "hrt",
|
||||
};
|
||||
|
||||
void __init
|
||||
plat_timer_setup (struct irqaction *irq)
|
||||
{
|
||||
unsigned int retval;
|
||||
|
||||
setup_irq(MIPS_CPU_TIMER_IRQ, irq);
|
||||
|
||||
r4k_cur = (read_c0_count() + r4k_offset);
|
||||
write_c0_compare(r4k_cur);
|
||||
|
||||
writel(readl(DANUBE_PMU_PWDCR) & ~(DANUBE_PMU_PWDCR_GPT|DANUBE_PMU_PWDCR_FPI), DANUBE_PMU_PWDCR);
|
||||
|
||||
writel(0x100, DANUBE_GPTU_GPT_CLC);
|
||||
|
||||
writel(0xffff, DANUBE_GPTU_GPT_CAPREL);
|
||||
writel(0x80C0, DANUBE_GPTU_GPT_T6CON);
|
||||
|
||||
retval = setup_irq(DANUBE_TIMER6_INT, &hrt_irqaction);
|
||||
|
||||
if (retval)
|
||||
{
|
||||
prom_printf("reqeust_irq failed %d. HIGH_RES_TIMER is diabled\n", DANUBE_TIMER6_INT);
|
||||
}
|
||||
}
|
||||
|
||||
void __init
|
||||
plat_mem_setup (void)
|
||||
{
|
||||
u32 status;
|
||||
prom_printf("This %s has a cpu rev of 0x%X\n", BOARD_SYSTEM_TYPE, danube_get_cpu_ver());
|
||||
|
||||
//TODO WHY ???
|
||||
/* clear RE bit*/
|
||||
status = read_c0_status();
|
||||
status &= (~(1<<25));
|
||||
write_c0_status(status);
|
||||
|
||||
danube_reboot_setup();
|
||||
board_time_init = danube_time_init;
|
||||
board_be_handler = &danube_be_handler;
|
||||
|
||||
ioport_resource.start = IOPORT_RESOURCE_START;
|
||||
ioport_resource.end = IOPORT_RESOURCE_END;
|
||||
iomem_resource.start = IOMEM_RESOURCE_START;
|
||||
iomem_resource.end = IOMEM_RESOURCE_END;
|
||||
}
|
||||
194
target/linux/danube/files/drivers/mtd/maps/danube.c
Normal file
194
target/linux/danube/files/drivers/mtd/maps/danube.c
Normal file
@ -0,0 +1,194 @@
|
||||
/*
|
||||
* Driver for DANUBE flashmap
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*
|
||||
* Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE
|
||||
* Copyright (C) 2007 John Crispin <blogic@openwrt.org>
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/map.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/mtd/cfi.h>
|
||||
#include <asm/danube/danube.h>
|
||||
#include <linux/magic.h>
|
||||
|
||||
static struct map_info
|
||||
danube_map = {
|
||||
.name = "DANUBE_FLASH",
|
||||
.bankwidth = 2,
|
||||
.size = 0x400000,
|
||||
};
|
||||
|
||||
static map_word
|
||||
danube_read16 (struct map_info * map, unsigned long adr)
|
||||
{
|
||||
map_word temp;
|
||||
|
||||
adr ^= 2;
|
||||
temp.x[0] = *((__u16 *) (map->virt + adr));
|
||||
|
||||
return temp;
|
||||
}
|
||||
|
||||
static void
|
||||
danube_write16 (struct map_info *map, map_word d, unsigned long adr)
|
||||
{
|
||||
adr ^= 2;
|
||||
*((__u16 *) (map->virt + adr)) = d.x[0];
|
||||
}
|
||||
|
||||
void
|
||||
danube_copy_from (struct map_info *map, void *to, unsigned long from, ssize_t len)
|
||||
{
|
||||
u8 *p;
|
||||
u8 *to_8;
|
||||
|
||||
from = (unsigned long) (from + map->virt);
|
||||
p = (u8 *) from;
|
||||
to_8 = (u8 *) to;
|
||||
while(len--){
|
||||
*to_8++ = *p++;
|
||||
}
|
||||
}
|
||||
|
||||
void
|
||||
danube_copy_to (struct map_info *map, unsigned long to, const void *from, ssize_t len)
|
||||
{
|
||||
u8 *p = (u8*) from;
|
||||
u8 *to_8;
|
||||
|
||||
to += (unsigned long) map->virt;
|
||||
to_8 = (u8*)to;
|
||||
while(len--){
|
||||
*p++ = *to_8++;
|
||||
}
|
||||
}
|
||||
|
||||
static struct mtd_partition
|
||||
danube_partitions[4] = {
|
||||
{
|
||||
name:"U-Boot",
|
||||
offset:0x00000000,
|
||||
size:0x00020000,
|
||||
},
|
||||
{
|
||||
name:"U-Boot-Env",
|
||||
offset:0x00020000,
|
||||
size:0x00010000,
|
||||
},
|
||||
{
|
||||
name:"kernel",
|
||||
offset:0x00030000,
|
||||
size:0x0,
|
||||
},
|
||||
{
|
||||
name:"rootfs",
|
||||
offset:0x0,
|
||||
size:0x0,
|
||||
},
|
||||
};
|
||||
|
||||
#define DANUBE_FLASH_START 0x10000000
|
||||
#define DANUBE_FLASH_MAX 0x2000000
|
||||
|
||||
int
|
||||
find_uImage_size (unsigned long start_offset){
|
||||
unsigned long temp;
|
||||
|
||||
danube_copy_from(&danube_map, &temp, start_offset + 12, 4);
|
||||
printk("kernel size is %ld \n", temp + 0x40);
|
||||
return temp + 0x40;
|
||||
}
|
||||
|
||||
int
|
||||
detect_squashfs_partition (unsigned long start_offset){
|
||||
unsigned long temp;
|
||||
|
||||
danube_copy_from(&danube_map, &temp, start_offset, 4);
|
||||
|
||||
return (temp == SQUASHFS_MAGIC);
|
||||
}
|
||||
|
||||
int __init
|
||||
init_danube_mtd (void)
|
||||
{
|
||||
struct mtd_info *danube_mtd = NULL;
|
||||
struct mtd_partition *parts = NULL;
|
||||
unsigned long uimage_size;
|
||||
|
||||
writel(0x1d7ff, DANUBE_EBU_BUSCON0);
|
||||
|
||||
danube_map.read = danube_read16;
|
||||
danube_map.write = danube_write16;
|
||||
danube_map.copy_from = danube_copy_from;
|
||||
danube_map.copy_to = danube_copy_to;
|
||||
|
||||
danube_map.phys = DANUBE_FLASH_START;
|
||||
danube_map.virt = ioremap_nocache(DANUBE_FLASH_START, DANUBE_FLASH_MAX);
|
||||
danube_map.size = DANUBE_FLASH_MAX;
|
||||
if (!danube_map.virt) {
|
||||
printk(KERN_WARNING "Failed to ioremap!\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
danube_mtd = (struct mtd_info *) do_map_probe("cfi_probe", &danube_map);
|
||||
if (!danube_mtd) {
|
||||
iounmap(danube_map.virt);
|
||||
printk("probing failed\n");
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
danube_mtd->owner = THIS_MODULE;
|
||||
|
||||
uimage_size = find_uImage_size(danube_partitions[2].offset);
|
||||
|
||||
if(detect_squashfs_partition(danube_partitions[2].offset + uimage_size)){
|
||||
printk("Found a squashfs following the uImage\n");
|
||||
} else {
|
||||
uimage_size &= ~0xffff;
|
||||
uimage_size += 0x10000;
|
||||
}
|
||||
|
||||
danube_partitions[2].size = uimage_size;
|
||||
danube_partitions[3].offset = danube_partitions[2].offset + danube_partitions[2].size;
|
||||
danube_partitions[3].size = ((danube_mtd->size >> 20) * 1024 * 1024) - danube_partitions[3].offset;
|
||||
|
||||
parts = &danube_partitions[0];
|
||||
add_mtd_partitions(danube_mtd, parts, 4);
|
||||
|
||||
printk("Added danube flash with %dMB\n", danube_mtd->size >> 20);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
__exit
|
||||
cleanup_danube_mtd (void)
|
||||
{
|
||||
}
|
||||
|
||||
module_init (init_danube_mtd);
|
||||
module_exit (cleanup_danube_mtd);
|
||||
|
||||
MODULE_LICENSE ("GPL");
|
||||
MODULE_AUTHOR ("John Crispin <blogic@openwrt.org>");
|
||||
MODULE_DESCRIPTION ("MTD map driver for DANUBE boards");
|
||||
433
target/linux/danube/files/drivers/net/danube_mii0.c
Normal file
433
target/linux/danube/files/drivers/net/danube_mii0.c
Normal file
@ -0,0 +1,433 @@
|
||||
/*
|
||||
* drivers/net/danube_mii0.c
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
|
||||
*
|
||||
* Copyright (C) 2005 Infineon
|
||||
*
|
||||
* Rewrite of Infineon Danube code, thanks to infineon for the support,
|
||||
* software and hardware
|
||||
*
|
||||
* Copyright (C) 2007 John Crispin <blogic@openwrt.org>
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <asm/uaccess.h>
|
||||
#include <linux/in.h>
|
||||
#include <linux/netdevice.h>
|
||||
#include <linux/etherdevice.h>
|
||||
#include <linux/ip.h>
|
||||
#include <linux/tcp.h>
|
||||
#include <linux/skbuff.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/ethtool.h>
|
||||
#include <asm/checksum.h>
|
||||
#include <linux/init.h>
|
||||
#include <asm/delay.h>
|
||||
#include <asm/danube/danube.h>
|
||||
#include <asm/danube/danube_mii0.h>
|
||||
#include <asm/danube/danube_dma.h>
|
||||
|
||||
static struct net_device danube_mii0_dev;
|
||||
static unsigned char u_boot_ethaddr[MAX_ADDR_LEN];
|
||||
|
||||
void
|
||||
danube_write_mdio (u32 phy_addr, u32 phy_reg, u16 phy_data)
|
||||
{
|
||||
u32 val = MDIO_ACC_REQUEST |
|
||||
((phy_addr & MDIO_ACC_ADDR_MASK) << MDIO_ACC_ADDR_OFFSET) |
|
||||
((phy_reg & MDIO_ACC_REG_MASK) << MDIO_ACC_REG_OFFSET) |
|
||||
phy_data;
|
||||
|
||||
while (readl(DANUBE_PPE32_MDIO_ACC) & MDIO_ACC_REQUEST);
|
||||
writel(val, DANUBE_PPE32_MDIO_ACC);
|
||||
}
|
||||
|
||||
unsigned short
|
||||
danube_read_mdio (u32 phy_addr, u32 phy_reg)
|
||||
{
|
||||
u32 val = MDIO_ACC_REQUEST | MDIO_ACC_READ |
|
||||
((phy_addr & MDIO_ACC_ADDR_MASK) << MDIO_ACC_ADDR_OFFSET) |
|
||||
((phy_reg & MDIO_ACC_REG_MASK) << MDIO_ACC_REG_OFFSET);
|
||||
|
||||
writel(val, DANUBE_PPE32_MDIO_ACC);
|
||||
while (readl(DANUBE_PPE32_MDIO_ACC) & MDIO_ACC_REQUEST){};
|
||||
val = readl(DANUBE_PPE32_MDIO_ACC) & MDIO_ACC_VAL_MASK;
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
int
|
||||
danube_switch_open (struct net_device *dev)
|
||||
{
|
||||
struct switch_priv* priv = (struct switch_priv*)dev->priv;
|
||||
struct dma_device_info* dma_dev = priv->dma_device;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < dma_dev->max_rx_chan_num; i++)
|
||||
{
|
||||
if ((dma_dev->rx_chan[i])->control == DANUBE_DMA_CH_ON)
|
||||
(dma_dev->rx_chan[i])->open(dma_dev->rx_chan[i]);
|
||||
}
|
||||
|
||||
netif_start_queue(dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int
|
||||
switch_release (struct net_device *dev){
|
||||
struct switch_priv* priv = (struct switch_priv*)dev->priv;
|
||||
struct dma_device_info* dma_dev = priv->dma_device;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < dma_dev->max_rx_chan_num; i++)
|
||||
dma_dev->rx_chan[i]->close(dma_dev->rx_chan[i]);
|
||||
|
||||
netif_stop_queue(dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int
|
||||
switch_hw_receive (struct net_device* dev,struct dma_device_info* dma_dev)
|
||||
{
|
||||
struct switch_priv *priv = (struct switch_priv*)dev->priv;
|
||||
unsigned char* buf = NULL;
|
||||
struct sk_buff *skb = NULL;
|
||||
int len = 0;
|
||||
|
||||
len = dma_device_read(dma_dev, &buf, (void**)&skb);
|
||||
|
||||
if (len >= ETHERNET_PACKET_DMA_BUFFER_SIZE)
|
||||
{
|
||||
printk("packet too large %d\n",len);
|
||||
goto switch_hw_receive_err_exit;
|
||||
}
|
||||
|
||||
/* remove CRC */
|
||||
len -= 4;
|
||||
if (skb == NULL )
|
||||
{
|
||||
printk("cannot restore pointer\n");
|
||||
goto switch_hw_receive_err_exit;
|
||||
}
|
||||
|
||||
if (len > (skb->end - skb->tail))
|
||||
{
|
||||
printk("BUG, len:%d end:%p tail:%p\n", (len+4), skb->end, skb->tail);
|
||||
goto switch_hw_receive_err_exit;
|
||||
}
|
||||
|
||||
skb_put(skb, len);
|
||||
skb->dev = dev;
|
||||
skb->protocol = eth_type_trans(skb, dev);
|
||||
netif_rx(skb);
|
||||
|
||||
priv->stats.rx_packets++;
|
||||
priv->stats.rx_bytes += len;
|
||||
|
||||
return 0;
|
||||
|
||||
switch_hw_receive_err_exit:
|
||||
if (len == 0)
|
||||
{
|
||||
if(skb)
|
||||
dev_kfree_skb_any(skb);
|
||||
priv->stats.rx_errors++;
|
||||
priv->stats.rx_dropped++;
|
||||
|
||||
return -EIO;
|
||||
} else {
|
||||
return len;
|
||||
}
|
||||
}
|
||||
|
||||
int
|
||||
switch_hw_tx (char *buf, int len, struct net_device *dev)
|
||||
{
|
||||
int ret = 0;
|
||||
struct switch_priv *priv = dev->priv;
|
||||
struct dma_device_info* dma_dev = priv->dma_device;
|
||||
|
||||
ret = dma_device_write(dma_dev, buf, len, priv->skb);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
int
|
||||
switch_tx (struct sk_buff *skb, struct net_device *dev)
|
||||
{
|
||||
int len;
|
||||
char *data;
|
||||
struct switch_priv *priv = dev->priv;
|
||||
struct dma_device_info* dma_dev = priv->dma_device;
|
||||
|
||||
len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
|
||||
data = skb->data;
|
||||
priv->skb = skb;
|
||||
dev->trans_start = jiffies;
|
||||
// TODO we got more than 1 dma channel, so we should do something intelligent
|
||||
// here to select one
|
||||
dma_dev->current_tx_chan = 0;
|
||||
|
||||
wmb();
|
||||
|
||||
if (switch_hw_tx(data, len, dev) != len)
|
||||
{
|
||||
dev_kfree_skb_any(skb);
|
||||
priv->stats.tx_errors++;
|
||||
priv->stats.tx_dropped++;
|
||||
} else {
|
||||
priv->stats.tx_packets++;
|
||||
priv->stats.tx_bytes+=len;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void
|
||||
switch_tx_timeout (struct net_device *dev)
|
||||
{
|
||||
int i;
|
||||
struct switch_priv* priv = (struct switch_priv*)dev->priv;
|
||||
|
||||
priv->stats.tx_errors++;
|
||||
|
||||
for (i = 0; i < priv->dma_device->max_tx_chan_num; i++)
|
||||
{
|
||||
priv->dma_device->tx_chan[i]->disable_irq(priv->dma_device->tx_chan[i]);
|
||||
}
|
||||
|
||||
netif_wake_queue(dev);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
int
|
||||
dma_intr_handler (struct dma_device_info* dma_dev, int status)
|
||||
{
|
||||
int i;
|
||||
|
||||
switch (status)
|
||||
{
|
||||
case RCV_INT:
|
||||
switch_hw_receive(&danube_mii0_dev, dma_dev);
|
||||
break;
|
||||
|
||||
case TX_BUF_FULL_INT:
|
||||
printk("tx buffer full\n");
|
||||
netif_stop_queue(&danube_mii0_dev);
|
||||
for (i = 0; i < dma_dev->max_tx_chan_num; i++)
|
||||
{
|
||||
if ((dma_dev->tx_chan[i])->control==DANUBE_DMA_CH_ON)
|
||||
dma_dev->tx_chan[i]->enable_irq(dma_dev->tx_chan[i]);
|
||||
}
|
||||
break;
|
||||
|
||||
case TRANSMIT_CPT_INT:
|
||||
for (i = 0; i < dma_dev->max_tx_chan_num; i++)
|
||||
dma_dev->tx_chan[i]->disable_irq(dma_dev->tx_chan[i]);
|
||||
|
||||
netif_wake_queue(&danube_mii0_dev);
|
||||
break;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
unsigned char*
|
||||
danube_etop_dma_buffer_alloc (int len, int *byte_offset, void **opt)
|
||||
{
|
||||
unsigned char *buffer = NULL;
|
||||
struct sk_buff *skb = NULL;
|
||||
|
||||
skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE);
|
||||
if (skb == NULL)
|
||||
return NULL;
|
||||
|
||||
buffer = (unsigned char*)(skb->data);
|
||||
skb_reserve(skb, 2);
|
||||
*(int*)opt = (int)skb;
|
||||
*byte_offset = 2;
|
||||
|
||||
return buffer;
|
||||
}
|
||||
|
||||
void
|
||||
danube_etop_dma_buffer_free (unsigned char *dataptr, void *opt)
|
||||
{
|
||||
struct sk_buff *skb = NULL;
|
||||
|
||||
if(opt == NULL)
|
||||
{
|
||||
kfree(dataptr);
|
||||
} else {
|
||||
skb = (struct sk_buff*)opt;
|
||||
dev_kfree_skb_any(skb);
|
||||
}
|
||||
}
|
||||
|
||||
static struct net_device_stats*
|
||||
danube_get_stats (struct net_device *dev)
|
||||
{
|
||||
return (struct net_device_stats *)dev->priv;
|
||||
}
|
||||
|
||||
static int
|
||||
switch_init (struct net_device *dev)
|
||||
{
|
||||
u64 retval = 0;
|
||||
int i;
|
||||
struct switch_priv *priv;
|
||||
|
||||
ether_setup(dev);
|
||||
|
||||
printk("%s up\n", dev->name);
|
||||
|
||||
dev->open = danube_switch_open;
|
||||
dev->stop = switch_release;
|
||||
dev->hard_start_xmit = switch_tx;
|
||||
dev->get_stats = danube_get_stats;
|
||||
dev->tx_timeout = switch_tx_timeout;
|
||||
dev->watchdog_timeo = 10 * HZ;
|
||||
dev->priv = kmalloc(sizeof(struct switch_priv), GFP_KERNEL);
|
||||
|
||||
if (dev->priv == NULL)
|
||||
return -ENOMEM;
|
||||
|
||||
memset(dev->priv, 0, sizeof(struct switch_priv));
|
||||
priv = dev->priv;
|
||||
|
||||
priv->dma_device = dma_device_reserve("PPE");
|
||||
|
||||
if (!priv->dma_device){
|
||||
BUG();
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
priv->dma_device->buffer_alloc = &danube_etop_dma_buffer_alloc;
|
||||
priv->dma_device->buffer_free = &danube_etop_dma_buffer_free;
|
||||
priv->dma_device->intr_handler = &dma_intr_handler;
|
||||
priv->dma_device->max_rx_chan_num = 4;
|
||||
|
||||
for (i = 0; i < priv->dma_device->max_rx_chan_num; i++)
|
||||
{
|
||||
priv->dma_device->rx_chan[i]->packet_size = ETHERNET_PACKET_DMA_BUFFER_SIZE;
|
||||
priv->dma_device->rx_chan[i]->control = DANUBE_DMA_CH_ON;
|
||||
}
|
||||
|
||||
for (i = 0; i < priv->dma_device->max_tx_chan_num; i++)
|
||||
{
|
||||
if(i == 0)
|
||||
priv->dma_device->tx_chan[i]->control = DANUBE_DMA_CH_ON;
|
||||
else
|
||||
priv->dma_device->tx_chan[i]->control = DANUBE_DMA_CH_OFF;
|
||||
}
|
||||
|
||||
dma_device_register(priv->dma_device);
|
||||
|
||||
/*read the mac address from the mac table and put them into the mac table.*/
|
||||
for (i = 0; i < 6; i++)
|
||||
{
|
||||
retval += u_boot_ethaddr[i];
|
||||
}
|
||||
|
||||
//TODO
|
||||
/* ethaddr not set in u-boot ? */
|
||||
if (retval == 0)
|
||||
{
|
||||
printk("use default MAC address\n");
|
||||
dev->dev_addr[0] = 0x00;
|
||||
dev->dev_addr[1] = 0x11;
|
||||
dev->dev_addr[2] = 0x22;
|
||||
dev->dev_addr[3] = 0x33;
|
||||
dev->dev_addr[4] = 0x44;
|
||||
dev->dev_addr[5] = 0x55;
|
||||
} else {
|
||||
for (i = 0; i < 6; i++)
|
||||
dev->dev_addr[i] = u_boot_ethaddr[i];
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
danube_sw_chip_init (int mode)
|
||||
{
|
||||
writel(readl(DANUBE_PMU_PWDCR) & ~DANUBE_PMU_PWDCR_DMA, DANUBE_PMU_PWDCR);
|
||||
writel(readl(DANUBE_PMU_PWDCR) & ~DANUBE_PMU_PWDCR_PPE, DANUBE_PMU_PWDCR);
|
||||
wmb();
|
||||
|
||||
if(mode == REV_MII_MODE)
|
||||
writel((readl(DANUBE_PPE32_CFG) & PPE32_MII_MASK) | PPE32_MII_REVERSE, DANUBE_PPE32_CFG);
|
||||
else if(mode == MII_MODE)
|
||||
writel((readl(DANUBE_PPE32_CFG) & PPE32_MII_MASK) | PPE32_MII_NORMAL, DANUBE_PPE32_CFG);
|
||||
|
||||
writel(PPE32_PLEN_UNDER | PPE32_PLEN_OVER, DANUBE_PPE32_IG_PLEN_CTRL);
|
||||
|
||||
writel(PPE32_CGEN, DANUBE_PPE32_ENET_MAC_CFG);
|
||||
|
||||
wmb();
|
||||
}
|
||||
|
||||
int __init
|
||||
switch_init_module(void)
|
||||
{
|
||||
int result = 0;
|
||||
|
||||
danube_mii0_dev.init = switch_init;
|
||||
|
||||
strcpy(danube_mii0_dev.name, "eth%d");
|
||||
SET_MODULE_OWNER(dev);
|
||||
|
||||
result = register_netdev(&danube_mii0_dev);
|
||||
if (result)
|
||||
{
|
||||
printk("error %i registering device \"%s\"\n", result, danube_mii0_dev.name);
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* danube eval kit connects the phy/switch in REV mode */
|
||||
danube_sw_chip_init(REV_MII_MODE);
|
||||
printk("danube MAC driver loaded!\n");
|
||||
|
||||
out:
|
||||
return result;
|
||||
}
|
||||
|
||||
static void __exit
|
||||
switch_cleanup(void)
|
||||
{
|
||||
struct switch_priv *priv = (struct switch_priv*)danube_mii0_dev.priv;
|
||||
|
||||
printk("danube_mii0 cleanup\n");
|
||||
|
||||
dma_device_unregister(priv->dma_device);
|
||||
dma_device_release(priv->dma_device);
|
||||
kfree(priv->dma_device);
|
||||
kfree(danube_mii0_dev.priv);
|
||||
unregister_netdev(&danube_mii0_dev);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
module_init(switch_init_module);
|
||||
module_exit(switch_cleanup);
|
||||
608
target/linux/danube/files/drivers/serial/danube_asc.c
Normal file
608
target/linux/danube/files/drivers/serial/danube_asc.c
Normal file
@ -0,0 +1,608 @@
|
||||
/*
|
||||
* Driver for DANUBEASC serial ports
|
||||
*
|
||||
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*
|
||||
* Copyright (C) 2004 Infineon IFAP DC COM CPE
|
||||
* Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
|
||||
* Copyright (C) 2007 John Crispin <blogic@openwrt.org>
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/signal.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/tty.h>
|
||||
#include <linux/tty_flip.h>
|
||||
#include <linux/major.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/fcntl.h>
|
||||
#include <linux/ptrace.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/circ_buf.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/console.h>
|
||||
#include <linux/sysrq.h>
|
||||
#include <linux/irq.h>
|
||||
|
||||
#include <asm/system.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/uaccess.h>
|
||||
#include <asm/bitops.h>
|
||||
#include <asm/danube/danube.h>
|
||||
#include <asm/danube/danube_irq.h>
|
||||
#include <asm/danube/danube_serial.h>
|
||||
|
||||
#define PORT_DANUBEASC 111
|
||||
|
||||
#include <linux/serial_core.h>
|
||||
|
||||
#define UART_DUMMY_UER_RX 1
|
||||
|
||||
static void danubeasc_tx_chars(struct uart_port *port);
|
||||
extern void prom_printf(const char * fmt, ...);
|
||||
static struct uart_port danubeasc_port;
|
||||
static struct uart_driver danubeasc_reg;
|
||||
static unsigned int uartclk = 0;
|
||||
extern unsigned int danube_get_fpi_hz(void);
|
||||
|
||||
static void
|
||||
danubeasc_stop_tx (struct uart_port *port)
|
||||
{
|
||||
/* fifo underrun shuts up after firing once */
|
||||
return;
|
||||
}
|
||||
|
||||
static void
|
||||
danubeasc_start_tx (struct uart_port *port)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
local_irq_save(flags);
|
||||
danubeasc_tx_chars(port);
|
||||
local_irq_restore(flags);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
static void
|
||||
danubeasc_stop_rx (struct uart_port *port)
|
||||
{
|
||||
/* clear the RX enable bit */
|
||||
writel(ASCWHBSTATE_CLRREN, DANUBE_ASC1_WHBSTATE);
|
||||
}
|
||||
|
||||
static void
|
||||
danubeasc_enable_ms (struct uart_port *port)
|
||||
{
|
||||
/* no modem signals */
|
||||
return;
|
||||
}
|
||||
|
||||
static void
|
||||
danubeasc_rx_chars (struct uart_port *port)
|
||||
{
|
||||
struct tty_struct *tty = port->info->tty;
|
||||
unsigned int ch = 0, rsr = 0, fifocnt;
|
||||
|
||||
fifocnt = readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_RXFFLMASK;
|
||||
while (fifocnt--)
|
||||
{
|
||||
u8 flag = TTY_NORMAL;
|
||||
ch = readl(DANUBE_ASC1_RBUF);
|
||||
rsr = (readl(DANUBE_ASC1_STATE) & ASCSTATE_ANY) | UART_DUMMY_UER_RX;
|
||||
tty_flip_buffer_push(tty);
|
||||
port->icount.rx++;
|
||||
|
||||
/*
|
||||
* Note that the error handling code is
|
||||
* out of the main execution path
|
||||
*/
|
||||
if (rsr & ASCSTATE_ANY) {
|
||||
if (rsr & ASCSTATE_PE) {
|
||||
port->icount.parity++;
|
||||
writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRPE, DANUBE_ASC1_WHBSTATE);
|
||||
} else if (rsr & ASCSTATE_FE) {
|
||||
port->icount.frame++;
|
||||
writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRFE, DANUBE_ASC1_WHBSTATE);
|
||||
}
|
||||
if (rsr & ASCSTATE_ROE) {
|
||||
port->icount.overrun++;
|
||||
writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRROE, DANUBE_ASC1_WHBSTATE);
|
||||
}
|
||||
|
||||
rsr &= port->read_status_mask;
|
||||
|
||||
if (rsr & ASCSTATE_PE)
|
||||
flag = TTY_PARITY;
|
||||
else if (rsr & ASCSTATE_FE)
|
||||
flag = TTY_FRAME;
|
||||
}
|
||||
|
||||
if ((rsr & port->ignore_status_mask) == 0)
|
||||
tty_insert_flip_char(tty, ch, flag);
|
||||
|
||||
if (rsr & ASCSTATE_ROE)
|
||||
/*
|
||||
* Overrun is special, since it's reported
|
||||
* immediately, and doesn't affect the current
|
||||
* character
|
||||
*/
|
||||
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
|
||||
}
|
||||
if (ch != 0)
|
||||
tty_flip_buffer_push(tty);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
static void
|
||||
danubeasc_tx_chars (struct uart_port *port)
|
||||
{
|
||||
struct circ_buf *xmit = &port->info->xmit;
|
||||
|
||||
if (uart_tx_stopped(port)) {
|
||||
danubeasc_stop_tx(port);
|
||||
return;
|
||||
}
|
||||
|
||||
while(((readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK)
|
||||
>> ASCFSTAT_TXFFLOFF) != DANUBEASC_TXFIFO_FULL)
|
||||
{
|
||||
if (port->x_char) {
|
||||
writel(port->x_char, DANUBE_ASC1_TBUF);
|
||||
port->icount.tx++;
|
||||
port->x_char = 0;
|
||||
continue;
|
||||
}
|
||||
|
||||
if (uart_circ_empty(xmit))
|
||||
break;
|
||||
|
||||
writel(port->info->xmit.buf[port->info->xmit.tail], DANUBE_ASC1_TBUF);
|
||||
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
||||
port->icount.tx++;
|
||||
}
|
||||
|
||||
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
||||
uart_write_wakeup(port);
|
||||
}
|
||||
|
||||
static irqreturn_t
|
||||
danubeasc_tx_int (int irq, void *port)
|
||||
{
|
||||
writel(ASC_IRNCR_TIR, DANUBE_ASC1_IRNCR);
|
||||
danubeasc_start_tx(port);
|
||||
mask_and_ack_danube_irq(irq);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static irqreturn_t
|
||||
danubeasc_er_int (int irq, void *port)
|
||||
{
|
||||
/* clear any pending interrupts */
|
||||
writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRPE |
|
||||
ASCWHBSTATE_CLRFE | ASCWHBSTATE_CLRROE, DANUBE_ASC1_WHBSTATE);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static irqreturn_t
|
||||
danubeasc_rx_int (int irq, void *port)
|
||||
{
|
||||
writel(ASC_IRNCR_RIR, DANUBE_ASC1_IRNCR);
|
||||
danubeasc_rx_chars((struct uart_port *) port);
|
||||
mask_and_ack_danube_irq(irq);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static unsigned int
|
||||
danubeasc_tx_empty (struct uart_port *port)
|
||||
{
|
||||
int status;
|
||||
|
||||
status = readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK;
|
||||
|
||||
return status ? 0 : TIOCSER_TEMT;
|
||||
}
|
||||
|
||||
static unsigned int
|
||||
danubeasc_get_mctrl (struct uart_port *port)
|
||||
{
|
||||
return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR;
|
||||
}
|
||||
|
||||
static void
|
||||
danubeasc_set_mctrl (struct uart_port *port, u_int mctrl)
|
||||
{
|
||||
return;
|
||||
}
|
||||
|
||||
static void
|
||||
danubeasc_break_ctl (struct uart_port *port, int break_state)
|
||||
{
|
||||
return;
|
||||
}
|
||||
|
||||
static void
|
||||
danubeasc1_hw_init (void)
|
||||
{
|
||||
/* this setup was probably already done in ROM/u-boot but we do it again*/
|
||||
/* TODO: GPIO pins are multifunction */
|
||||
writel(readl(DANUBE_ASC1_CLC) & ~DANUBE_ASC1_CLC_DISS, DANUBE_ASC1_CLC);
|
||||
writel((readl(DANUBE_ASC1_CLC) & ~ASCCLC_RMCMASK) | (1 << ASCCLC_RMCOFFSET), DANUBE_ASC1_CLC);
|
||||
writel(0, DANUBE_ASC1_PISEL);
|
||||
writel(((DANUBEASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) &
|
||||
ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, DANUBE_ASC1_TXFCON);
|
||||
writel(((DANUBEASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) &
|
||||
ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, DANUBE_ASC1_RXFCON);
|
||||
wmb ();
|
||||
|
||||
/*framing, overrun, enable */
|
||||
writel(readl(DANUBE_ASC1_CON) | ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN,
|
||||
DANUBE_ASC1_CON);
|
||||
}
|
||||
|
||||
static int
|
||||
danubeasc_startup (struct uart_port *port)
|
||||
{
|
||||
unsigned long flags;
|
||||
int retval;
|
||||
|
||||
/* this assumes: CON.BRS = CON.FDE = 0 */
|
||||
if (uartclk == 0)
|
||||
uartclk = danube_get_fpi_hz();
|
||||
|
||||
danubeasc_port.uartclk = uartclk;
|
||||
|
||||
danubeasc1_hw_init();
|
||||
|
||||
local_irq_save(flags);
|
||||
|
||||
retval = request_irq(DANUBEASC1_RIR, danubeasc_rx_int, IRQF_DISABLED, "asc_rx", port);
|
||||
if (retval){
|
||||
printk("failed to request danubeasc_rx_int\n");
|
||||
return retval;
|
||||
}
|
||||
|
||||
retval = request_irq(DANUBEASC1_TIR, danubeasc_tx_int, IRQF_DISABLED, "asc_tx", port);
|
||||
if (retval){
|
||||
printk("failed to request danubeasc_tx_int\n");
|
||||
goto err1;
|
||||
}
|
||||
|
||||
retval = request_irq(DANUBEASC1_EIR, danubeasc_er_int, IRQF_DISABLED, "asc_er", port);
|
||||
if (retval){
|
||||
printk("failed to request danubeasc_er_int\n");
|
||||
goto err2;
|
||||
}
|
||||
|
||||
writel(ASC_IRNREN_RX_BUF | ASC_IRNREN_TX_BUF | ASC_IRNREN_ERR | ASC_IRNREN_TX,
|
||||
DANUBE_ASC1_IRNREN);
|
||||
|
||||
local_irq_restore(flags);
|
||||
|
||||
return 0;
|
||||
|
||||
err2:
|
||||
free_irq(DANUBEASC1_TIR, port);
|
||||
|
||||
err1:
|
||||
free_irq(DANUBEASC1_RIR, port);
|
||||
local_irq_restore(flags);
|
||||
|
||||
return retval;
|
||||
}
|
||||
|
||||
static void
|
||||
danubeasc_shutdown (struct uart_port *port)
|
||||
{
|
||||
free_irq(DANUBEASC1_RIR, port);
|
||||
free_irq(DANUBEASC1_TIR, port);
|
||||
free_irq(DANUBEASC1_EIR, port);
|
||||
/*
|
||||
* disable the baudrate generator to disable the ASC
|
||||
*/
|
||||
writel(0, DANUBE_ASC1_CON);
|
||||
|
||||
/* flush and then disable the fifos */
|
||||
writel(readl(DANUBE_ASC1_RXFCON) | ASCRXFCON_RXFFLU, DANUBE_ASC1_RXFCON);
|
||||
writel(readl(DANUBE_ASC1_RXFCON) & ~ASCRXFCON_RXFEN, DANUBE_ASC1_RXFCON);
|
||||
writel(readl(DANUBE_ASC1_TXFCON) | ASCTXFCON_TXFFLU, DANUBE_ASC1_TXFCON);
|
||||
writel(readl(DANUBE_ASC1_TXFCON) & ~ASCTXFCON_TXFEN, DANUBE_ASC1_TXFCON);
|
||||
}
|
||||
|
||||
static void danubeasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old)
|
||||
{
|
||||
unsigned int cflag;
|
||||
unsigned int iflag;
|
||||
unsigned int quot;
|
||||
unsigned int baud;
|
||||
unsigned int con = 0;
|
||||
unsigned long flags;
|
||||
|
||||
cflag = new->c_cflag;
|
||||
iflag = new->c_iflag;
|
||||
|
||||
/* byte size and parity */
|
||||
switch (cflag & CSIZE) {
|
||||
case CS7:
|
||||
con = ASCCON_M_7ASYNC;
|
||||
break;
|
||||
|
||||
case CS5:
|
||||
case CS6:
|
||||
default:
|
||||
con = ASCCON_M_8ASYNC;
|
||||
break;
|
||||
}
|
||||
|
||||
if (cflag & CSTOPB)
|
||||
con |= ASCCON_STP;
|
||||
|
||||
if (cflag & PARENB) {
|
||||
if (!(cflag & PARODD))
|
||||
con &= ~ASCCON_ODD;
|
||||
else
|
||||
con |= ASCCON_ODD;
|
||||
}
|
||||
|
||||
port->read_status_mask = ASCSTATE_ROE;
|
||||
if (iflag & INPCK)
|
||||
port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
|
||||
|
||||
port->ignore_status_mask = 0;
|
||||
if (iflag & IGNPAR)
|
||||
port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
|
||||
|
||||
if (iflag & IGNBRK) {
|
||||
/*
|
||||
* If we're ignoring parity and break indicators,
|
||||
* ignore overruns too (for real raw support).
|
||||
*/
|
||||
if (iflag & IGNPAR)
|
||||
port->ignore_status_mask |= ASCSTATE_ROE;
|
||||
}
|
||||
|
||||
if ((cflag & CREAD) == 0)
|
||||
port->ignore_status_mask |= UART_DUMMY_UER_RX;
|
||||
|
||||
/* set error signals - framing, parity and overrun, enable receiver */
|
||||
con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN;
|
||||
|
||||
local_irq_save(flags);
|
||||
|
||||
/* set up CON */
|
||||
writel(readl(DANUBE_ASC1_CON) | con, DANUBE_ASC1_CON);
|
||||
|
||||
/* Set baud rate - take a divider of 2 into account */
|
||||
baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
|
||||
quot = uart_get_divisor(port, baud);
|
||||
quot = quot / 2 - 1;
|
||||
|
||||
/* disable the baudrate generator */
|
||||
writel(readl(DANUBE_ASC1_CON) & ~ASCCON_R, DANUBE_ASC1_CON);
|
||||
|
||||
/* make sure the fractional divider is off */
|
||||
writel(readl(DANUBE_ASC1_CON) & ~ASCCON_FDE, DANUBE_ASC1_CON);
|
||||
|
||||
/* set up to use divisor of 2 */
|
||||
writel(readl(DANUBE_ASC1_CON) & ~ASCCON_BRS, DANUBE_ASC1_CON);
|
||||
|
||||
/* now we can write the new baudrate into the register */
|
||||
writel(quot, DANUBE_ASC1_BG);
|
||||
|
||||
/* turn the baudrate generator back on */
|
||||
writel(readl(DANUBE_ASC1_CON) | ASCCON_R, DANUBE_ASC1_CON);
|
||||
|
||||
/* enable rx */
|
||||
writel(ASCWHBSTATE_SETREN, DANUBE_ASC1_WHBSTATE);
|
||||
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
|
||||
static const char*
|
||||
danubeasc_type (struct uart_port *port)
|
||||
{
|
||||
return port->type == PORT_DANUBEASC ? "DANUBEASC" : NULL;
|
||||
}
|
||||
|
||||
static void
|
||||
danubeasc_release_port (struct uart_port *port)
|
||||
{
|
||||
return;
|
||||
}
|
||||
|
||||
static int
|
||||
danubeasc_request_port (struct uart_port *port)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
danubeasc_config_port (struct uart_port *port, int flags)
|
||||
{
|
||||
if (flags & UART_CONFIG_TYPE) {
|
||||
port->type = PORT_DANUBEASC;
|
||||
danubeasc_request_port(port);
|
||||
}
|
||||
}
|
||||
|
||||
static int
|
||||
danubeasc_verify_port (struct uart_port *port, struct serial_struct *ser)
|
||||
{
|
||||
int ret = 0;
|
||||
if (ser->type != PORT_UNKNOWN && ser->type != PORT_DANUBEASC)
|
||||
ret = -EINVAL;
|
||||
if (ser->irq < 0 || ser->irq >= NR_IRQS)
|
||||
ret = -EINVAL;
|
||||
if (ser->baud_base < 9600)
|
||||
ret = -EINVAL;
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct uart_ops danubeasc_pops = {
|
||||
.tx_empty = danubeasc_tx_empty,
|
||||
.set_mctrl = danubeasc_set_mctrl,
|
||||
.get_mctrl = danubeasc_get_mctrl,
|
||||
.stop_tx = danubeasc_stop_tx,
|
||||
.start_tx = danubeasc_start_tx,
|
||||
.stop_rx = danubeasc_stop_rx,
|
||||
.enable_ms = danubeasc_enable_ms,
|
||||
.break_ctl = danubeasc_break_ctl,
|
||||
.startup = danubeasc_startup,
|
||||
.shutdown = danubeasc_shutdown,
|
||||
.set_termios = danubeasc_set_termios,
|
||||
.type = danubeasc_type,
|
||||
.release_port = danubeasc_release_port,
|
||||
.request_port = danubeasc_request_port,
|
||||
.config_port = danubeasc_config_port,
|
||||
.verify_port = danubeasc_verify_port,
|
||||
};
|
||||
|
||||
static struct uart_port danubeasc_port = {
|
||||
membase: (void *)DANUBE_ASC1_BASE_ADDR,
|
||||
mapbase: DANUBE_ASC1_BASE_ADDR,
|
||||
iotype: SERIAL_IO_MEM,
|
||||
irq: DANUBEASC1_RIR,
|
||||
uartclk: 0,
|
||||
fifosize: 16,
|
||||
unused: {DANUBEASC1_TIR, DANUBEASC1_EIR},
|
||||
type: PORT_DANUBEASC,
|
||||
ops: &danubeasc_pops,
|
||||
flags: ASYNC_BOOT_AUTOCONF,
|
||||
};
|
||||
|
||||
static void
|
||||
danubeasc_console_write (struct console *co, const char *s, u_int count)
|
||||
{
|
||||
int i, fifocnt;
|
||||
unsigned long flags;
|
||||
|
||||
local_irq_save(flags);
|
||||
for (i = 0; i < count; i++)
|
||||
{
|
||||
/* wait until the FIFO is not full */
|
||||
do
|
||||
{
|
||||
fifocnt = (readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK)
|
||||
>> ASCFSTAT_TXFFLOFF;
|
||||
} while (fifocnt == DANUBEASC_TXFIFO_FULL);
|
||||
|
||||
if (s[i] == '\0')
|
||||
{
|
||||
break;
|
||||
}
|
||||
|
||||
if (s[i] == '\n')
|
||||
{
|
||||
writel('\r', DANUBE_ASC1_TBUF);
|
||||
do
|
||||
{
|
||||
fifocnt = (readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK)
|
||||
>> ASCFSTAT_TXFFLOFF;
|
||||
} while (fifocnt == DANUBEASC_TXFIFO_FULL);
|
||||
}
|
||||
writel(s[i], DANUBE_ASC1_TBUF);
|
||||
}
|
||||
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
|
||||
static int __init
|
||||
danubeasc_console_setup (struct console *co, char *options)
|
||||
{
|
||||
struct uart_port *port;
|
||||
int baud = 115200;
|
||||
int bits = 8;
|
||||
int parity = 'n';
|
||||
int flow = 'n';
|
||||
|
||||
if (uartclk == 0)
|
||||
uartclk = danube_get_fpi_hz();
|
||||
co->index = 0;
|
||||
port = &danubeasc_port;
|
||||
danubeasc_port.uartclk = uartclk;
|
||||
danubeasc_port.type = PORT_DANUBEASC;
|
||||
|
||||
if (options){
|
||||
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
||||
}
|
||||
|
||||
return uart_set_options(port, co, baud, parity, bits, flow);
|
||||
}
|
||||
|
||||
static struct uart_driver danubeasc_reg;
|
||||
static struct console danubeasc_console = {
|
||||
name: "ttyS",
|
||||
write: danubeasc_console_write,
|
||||
device: uart_console_device,
|
||||
setup: danubeasc_console_setup,
|
||||
flags: CON_PRINTBUFFER,
|
||||
index: -1,
|
||||
data: &danubeasc_reg,
|
||||
};
|
||||
|
||||
static int __init
|
||||
danubeasc_console_init (void)
|
||||
{
|
||||
register_console(&danubeasc_console);
|
||||
return 0;
|
||||
}
|
||||
console_initcall(danubeasc_console_init);
|
||||
|
||||
static struct uart_driver danubeasc_reg = {
|
||||
.owner = THIS_MODULE,
|
||||
.driver_name = "serial",
|
||||
.dev_name = "ttyS",
|
||||
.major = TTY_MAJOR,
|
||||
.minor = 64,
|
||||
.nr = 1,
|
||||
.cons = &danubeasc_console,
|
||||
};
|
||||
|
||||
static int __init
|
||||
danubeasc_init (void)
|
||||
{
|
||||
unsigned char res;
|
||||
|
||||
uart_register_driver(&danubeasc_reg);
|
||||
res = uart_add_one_port(&danubeasc_reg, &danubeasc_port);
|
||||
|
||||
return res;
|
||||
}
|
||||
|
||||
static void __exit
|
||||
danubeasc_exit (void)
|
||||
{
|
||||
uart_unregister_driver(&danubeasc_reg);
|
||||
}
|
||||
|
||||
module_init(danubeasc_init);
|
||||
module_exit(danubeasc_exit);
|
||||
|
||||
MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
|
||||
MODULE_DESCRIPTION("MIPS Danube serial port driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
288
target/linux/danube/files/include/asm-mips/danube/danube.h
Normal file
288
target/linux/danube/files/include/asm-mips/danube/danube.h
Normal file
@ -0,0 +1,288 @@
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
|
||||
*
|
||||
* Copyright (C) 2005 infineon
|
||||
* Copyright (C) 2007 John Crispin <blogic@openwrt.org>
|
||||
*
|
||||
*/
|
||||
#ifndef _DANUBE_H__
|
||||
#define _DANUBE_H__
|
||||
|
||||
|
||||
/*------------ GENERAL */
|
||||
|
||||
#define BOARD_SYSTEM_TYPE "DANUBE"
|
||||
|
||||
#define IOPORT_RESOURCE_START 0x10000000
|
||||
#define IOPORT_RESOURCE_END 0xffffffff
|
||||
#define IOMEM_RESOURCE_START 0x10000000
|
||||
#define IOMEM_RESOURCE_END 0xffffffff
|
||||
|
||||
|
||||
/*------------ ASC1 */
|
||||
|
||||
#define DANUBE_ASC1_BASE_ADDR (KSEG1 + 0x1E100C00)
|
||||
|
||||
/* FIFO status register */
|
||||
#define DANUBE_ASC1_FSTAT ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0048))
|
||||
#define ASCFSTAT_TXFFLMASK 0x3F00
|
||||
#define ASCFSTAT_TXFFLOFF 8
|
||||
|
||||
/* ASC1 transmit buffer */
|
||||
#define DANUBE_ASC1_TBUF ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0020))
|
||||
|
||||
/* channel operating modes */
|
||||
#define ASCOPT_CSIZE 0x3
|
||||
#define ASCOPT_CS7 0x1
|
||||
#define ASCOPT_CS8 0x2
|
||||
#define ASCOPT_PARENB 0x4
|
||||
#define ASCOPT_STOPB 0x8
|
||||
#define ASCOPT_PARODD 0x0
|
||||
#define ASCOPT_CREAD 0x20
|
||||
|
||||
/* hardware modified control register */
|
||||
#define DANUBE_ASC1_WHBSTATE ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0018))
|
||||
|
||||
/* receive buffer register */
|
||||
#define DANUBE_ASC1_RBUF ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0024))
|
||||
|
||||
/* status register */
|
||||
#define DANUBE_ASC1_STATE ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0014))
|
||||
|
||||
/* interrupt control */
|
||||
#define DANUBE_ASC1_IRNCR ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x00F8))
|
||||
|
||||
#define ASC_IRNCR_TIR 0x4
|
||||
#define ASC_IRNCR_RIR 0x2
|
||||
#define ASC_IRNCR_EIR 0x4
|
||||
|
||||
/* clock control */
|
||||
#define DANUBE_ASC1_CLC ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0000))
|
||||
|
||||
#define DANUBE_ASC1_CLC_DISS 0x2
|
||||
|
||||
/* port input select register */
|
||||
#define DANUBE_ASC1_PISEL ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0004))
|
||||
|
||||
/* tx fifo */
|
||||
#define DANUBE_ASC1_TXFCON ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0044))
|
||||
|
||||
/* rx fifo */
|
||||
#define DANUBE_ASC1_RXFCON ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0040))
|
||||
|
||||
/* control */
|
||||
#define DANUBE_ASC1_CON ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0010))
|
||||
|
||||
/* timer reload */
|
||||
#define DANUBE_ASC1_BG ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0050))
|
||||
|
||||
/* int enable */
|
||||
#define DANUBE_ASC1_IRNREN ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x00F4))
|
||||
|
||||
#define ASC_IRNREN_RX_BUF 0x8
|
||||
#define ASC_IRNREN_TX_BUF 0x4
|
||||
#define ASC_IRNREN_ERR 0x2
|
||||
#define ASC_IRNREN_TX 0x1
|
||||
|
||||
|
||||
/*------------ RCU */
|
||||
|
||||
#define DANUBE_RCU_BASE_ADDR 0xBF203000
|
||||
|
||||
/* reset request */
|
||||
#define DANUBE_RCU_REQ ((u32*)(DANUBE_RCU_BASE_ADDR + 0x0010))
|
||||
#define DANUBE_RST_ALL 0x40000000
|
||||
|
||||
|
||||
/*------------ MCD */
|
||||
|
||||
#define DANUBE_MCD_BASE_ADDR (KSEG1 + 0x1F106000)
|
||||
|
||||
/* chip id */
|
||||
#define DANUBE_MCD_CHIPID ((u32*)(DANUBE_MCD_BASE_ADDR + 0x0028))
|
||||
|
||||
|
||||
/*------------ GPTU */
|
||||
|
||||
#define DANUBE_GPTU_BASE_ADDR 0xB8000300
|
||||
|
||||
/* clock control register */
|
||||
#define DANUBE_GPTU_GPT_CLC ((u32*)(DANUBE_GPTU_BASE_ADDR + 0x0000))
|
||||
|
||||
/* captur reload register */
|
||||
#define DANUBE_GPTU_GPT_CAPREL ((u32*)(DANUBE_GPTU_BASE_ADDR + 0x0030))
|
||||
|
||||
/* timer 6 control register */
|
||||
#define DANUBE_GPTU_GPT_T6CON ((u32*)(DANUBE_GPTU_BASE_ADDR + 0x0020))
|
||||
|
||||
|
||||
/*------------ EBU */
|
||||
|
||||
#define DANUBE_EBU_BASE_ADDR 0xBE105300
|
||||
|
||||
/* bus configuration register */
|
||||
#define DANUBE_EBU_BUSCON0 ((u32*)(DANUBE_EBU_BASE_ADDR + 0x0060))
|
||||
#define DANUBE_EBU_PCC_CON ((u32*)(DANUBE_EBU_BASE_ADDR + 0x0090))
|
||||
#define DANUBE_EBU_PCC_IEN ((u32*)(DANUBE_EBU_BASE_ADDR + 0x00A4))
|
||||
#define DANUBE_EBU_PCC_ISTAT ((u32*)(DANUBE_EBU_BASE_ADDR + 0x00A0))
|
||||
|
||||
|
||||
/*------------ CGU */
|
||||
|
||||
#define DANUBE_CGU_BASE_ADDR 0xBF103000
|
||||
|
||||
/* clock mux */
|
||||
#define DANUBE_CGU_SYS ((u32*)(DANUBE_CGU_BASE_ADDR + 0x0010))
|
||||
#define DANUBE_CGU_IFCCR ((u32*)(DANUBE_CGU_BASE_ADDR + 0x0018))
|
||||
#define DANUBE_CGU_PCICR ((u32*)(DANUBE_CGU_BASE_ADDR + 0x0034))
|
||||
|
||||
#define CLOCK_60M 60000000
|
||||
#define CLOCK_83M 83333333
|
||||
#define CLOCK_111M 111111111
|
||||
#define CLOCK_133M 133333333
|
||||
#define CLOCK_167M 166666667
|
||||
#define CLOCK_333M 333333333
|
||||
|
||||
|
||||
/*------------ CGU */
|
||||
|
||||
#define DANUBE_PMU_BASE_ADDR (KSEG1 + 0x1F102000)
|
||||
|
||||
/* power down control */
|
||||
#define DANUBE_PMU_PWDCR ((u32*)(DANUBE_PMU_BASE_ADDR + 0x001C))
|
||||
#define DANUBE_PMU_PWDCR_DMA 0x20
|
||||
#define DANUBE_PMU_PWDCR_GPT 0x1000
|
||||
#define DANUBE_PMU_PWDCR_PPE 0x2000
|
||||
#define DANUBE_PMU_PWDCR_FPI 0x4000
|
||||
|
||||
|
||||
/*------------ ICU */
|
||||
|
||||
#define DANUBE_ICU_BASE_ADDR 0xBF880200
|
||||
|
||||
|
||||
#define DANUBE_ICU_IM0_ISR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0000))
|
||||
#define DANUBE_ICU_IM0_IER ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0008))
|
||||
#define DANUBE_ICU_IM0_IOSR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0010))
|
||||
#define DANUBE_ICU_IM0_IRSR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0018))
|
||||
#define DANUBE_ICU_IM0_IMR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0020))
|
||||
|
||||
#define DANUBE_ICU_IM1_ISR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0028))
|
||||
|
||||
#define DANUBE_ICU_OFFSET (DANUBE_ICU_IM1_ISR - DANUBE_ICU_IM0_ISR)
|
||||
|
||||
|
||||
/*------------ ETOP */
|
||||
|
||||
#define DANUBE_PPE32_BASE_ADDR 0xBE180000
|
||||
|
||||
#define ETHERNET_PACKET_DMA_BUFFER_SIZE 0x600
|
||||
|
||||
#define DANUBE_PPE32_MEM_MAP (DANUBE_PPE32_BASE_ADDR + 0x10000 )
|
||||
|
||||
#define MII_MODE 1
|
||||
|
||||
#define REV_MII_MODE 2
|
||||
|
||||
/* mdio access */
|
||||
#define DANUBE_PPE32_MDIO_ACC ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1804))
|
||||
|
||||
#define MDIO_ACC_REQUEST 0x80000000
|
||||
#define MDIO_ACC_READ 0x40000000
|
||||
#define MDIO_ACC_ADDR_MASK 0x1f
|
||||
#define MDIO_ACC_ADDR_OFFSET 0x15
|
||||
#define MDIO_ACC_REG_MASK 0xff
|
||||
#define MDIO_ACC_REG_OFFSET 0x10
|
||||
#define MDIO_ACC_VAL_MASK 0xffff
|
||||
|
||||
/* configuration */
|
||||
#define DANUBE_PPE32_CFG ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1808))
|
||||
|
||||
#define PPE32_MII_MASK 0xfffffffc
|
||||
#define PPE32_MII_NORMAL 0x8
|
||||
#define PPE32_MII_REVERSE 0xe
|
||||
|
||||
/* packet length */
|
||||
#define DANUBE_PPE32_IG_PLEN_CTRL ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1820))
|
||||
|
||||
#define PPE32_PLEN_OVER 0x5ee
|
||||
#define PPE32_PLEN_UNDER 0x400000
|
||||
|
||||
/* enet */
|
||||
#define DANUBE_PPE32_ENET_MAC_CFG ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1840))
|
||||
|
||||
#define PPE32_CGEN 0x800
|
||||
|
||||
|
||||
/*------------ DMA */
|
||||
#define DANUBE_DMA_BASE_ADDR 0xBE104100
|
||||
|
||||
#define DANUBE_DMA_CS ((u32*)(DANUBE_DMA_BASE_ADDR + 0x18))
|
||||
#define DANUBE_DMA_CIE ((u32*)(DANUBE_DMA_BASE_ADDR + 0x2C))
|
||||
#define DANUBE_DMA_IRNEN ((u32*)(DANUBE_DMA_BASE_ADDR + 0xf4))
|
||||
#define DANUBE_DMA_CCTRL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x1C))
|
||||
#define DANUBE_DMA_CIS ((u32*)(DANUBE_DMA_BASE_ADDR + 0x28))
|
||||
#define DANUBE_DMA_CDLEN ((u32*)(DANUBE_DMA_BASE_ADDR + 0x24))
|
||||
#define DANUBE_DMA_PS ((u32*)(DANUBE_DMA_BASE_ADDR + 0x40))
|
||||
#define DANUBE_DMA_PCTRL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x44))
|
||||
#define DANUBE_DMA_CTRL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x10))
|
||||
#define DANUBE_DMA_CPOLL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x14))
|
||||
#define DANUBE_DMA_CDBA ((u32*)(DANUBE_DMA_BASE_ADDR + 0x20))
|
||||
|
||||
|
||||
/*------------ PCI */
|
||||
#define PCI_CR_PR_BASE_ADDR (KSEG1 + 0x1E105400)
|
||||
|
||||
#define PCI_CR_FCI_ADDR_MAP0 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00C0))
|
||||
#define PCI_CR_FCI_ADDR_MAP1 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00C4))
|
||||
#define PCI_CR_FCI_ADDR_MAP2 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00C8))
|
||||
#define PCI_CR_FCI_ADDR_MAP3 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00CC))
|
||||
#define PCI_CR_FCI_ADDR_MAP4 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00D0))
|
||||
#define PCI_CR_FCI_ADDR_MAP5 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00D4))
|
||||
#define PCI_CR_FCI_ADDR_MAP6 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00D8))
|
||||
#define PCI_CR_FCI_ADDR_MAP7 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00DC))
|
||||
#define PCI_CR_CLK_CTRL ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0000))
|
||||
#define PCI_CR_PCI_MOD ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0030))
|
||||
#define PCI_CR_PC_ARB ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0080))
|
||||
#define PCI_CR_FCI_ADDR_MAP11hg ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00E4))
|
||||
#define PCI_CR_BAR11MASK ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0044))
|
||||
#define PCI_CR_BAR12MASK ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0048))
|
||||
#define PCI_CR_BAR13MASK ((u32*)(PCI_CR_PR_BASE_ADDR + 0x004C))
|
||||
#define PCI_CS_BASE_ADDR1 ((u32*)(PCI_CS_PR_BASE_ADDR + 0x0010))
|
||||
#define PCI_CR_PCI_ADDR_MAP11 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0064))
|
||||
#define PCI_CR_FCI_BURST_LENGTH ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00E8))
|
||||
#define PCI_CR_PCI_EOI ((u32*)(PCI_CR_PR_BASE_ADDR + 0x002C))
|
||||
|
||||
#define PCI_CS_PR_BASE_ADDR (KSEG1 + 0x17000000)
|
||||
|
||||
#define PCI_CS_STS_CMD ((u32*)(PCI_CS_PR_BASE_ADDR + 0x0004))
|
||||
|
||||
#define PCI_MASTER0_REQ_MASK_2BITS 8
|
||||
#define PCI_MASTER1_REQ_MASK_2BITS 10
|
||||
#define PCI_MASTER2_REQ_MASK_2BITS 12
|
||||
#define INTERNAL_ARB_ENABLE_BIT 0
|
||||
|
||||
|
||||
/*------------ GPIO */
|
||||
#define DANUBE_GPIO_BASE_ADDR 0xBE100B00
|
||||
|
||||
#define DANUBE_GPIO_P1_OUT ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0040))
|
||||
#define DANUBE_GPIO_P1_OD ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0054))
|
||||
#define DANUBE_GPIO_P1_ALTSEL0 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x004C))
|
||||
#define DANUBE_GPIO_P0_ALTSEL1 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0020))
|
||||
#define DANUBE_GPIO_P1_ALTSEL1 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0050))
|
||||
#define DANUBE_GPIO_P1_DIR ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0048))
|
||||
|
||||
#endif
|
||||
202
target/linux/danube/files/include/asm-mips/danube/danube_dma.h
Normal file
202
target/linux/danube/files/include/asm-mips/danube/danube_dma.h
Normal file
@ -0,0 +1,202 @@
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
|
||||
*
|
||||
* Copyright (C) 2005 infineon
|
||||
* Copyright (C) 2007 John Crispin <blogic@openwrt.org>
|
||||
*
|
||||
*/
|
||||
#ifndef _DANUBE_DMA_H__
|
||||
#define _DANUBE_DMA_H__
|
||||
|
||||
#define RCV_INT 1
|
||||
#define TX_BUF_FULL_INT 2
|
||||
#define TRANSMIT_CPT_INT 4
|
||||
#define DANUBE_DMA_CH_ON 1
|
||||
#define DANUBE_DMA_CH_OFF 0
|
||||
#define DANUBE_DMA_CH_DEFAULT_WEIGHT 100
|
||||
|
||||
enum attr_t{
|
||||
TX = 0,
|
||||
RX = 1,
|
||||
RESERVED = 2,
|
||||
DEFAULT = 3,
|
||||
};
|
||||
|
||||
#define DMA_OWN 1
|
||||
#define CPU_OWN 0
|
||||
#define DMA_MAJOR 250
|
||||
|
||||
#define DMA_DESC_OWN_CPU 0x0
|
||||
#define DMA_DESC_OWN_DMA 0x80000000
|
||||
#define DMA_DESC_CPT_SET 0x40000000
|
||||
#define DMA_DESC_SOP_SET 0x20000000
|
||||
#define DMA_DESC_EOP_SET 0x10000000
|
||||
|
||||
#define MISCFG_MASK 0x40
|
||||
#define RDERR_MASK 0x20
|
||||
#define CHOFF_MASK 0x10
|
||||
#define DESCPT_MASK 0x8
|
||||
#define DUR_MASK 0x4
|
||||
#define EOP_MASK 0x2
|
||||
|
||||
#define DMA_DROP_MASK (1<<31)
|
||||
|
||||
#define DANUBE_DMA_RX -1
|
||||
#define DANUBE_DMA_TX 1
|
||||
|
||||
typedef struct dma_chan_map {
|
||||
char dev_name[15];
|
||||
enum attr_t dir;
|
||||
int pri;
|
||||
int irq;
|
||||
int rel_chan_no;
|
||||
} _dma_chan_map;
|
||||
|
||||
#ifdef CONFIG_CPU_LITTLE_ENDIAN
|
||||
typedef struct rx_desc{
|
||||
u32 data_length:16;
|
||||
volatile u32 reserved:7;
|
||||
volatile u32 byte_offset:2;
|
||||
volatile u32 Burst_length_offset:3;
|
||||
volatile u32 EoP:1;
|
||||
volatile u32 Res:1;
|
||||
volatile u32 C:1;
|
||||
volatile u32 OWN:1;
|
||||
volatile u32 Data_Pointer;
|
||||
/*fix me:should be 28 bits here, 32 bits just for host simulatiuon purpose*/
|
||||
}_rx_desc;
|
||||
|
||||
typedef struct tx_desc{
|
||||
volatile u32 data_length:16;
|
||||
volatile u32 reserved1:7;
|
||||
volatile u32 byte_offset:5;
|
||||
volatile u32 EoP:1;
|
||||
volatile u32 SoP:1;
|
||||
volatile u32 C:1;
|
||||
volatile u32 OWN:1;
|
||||
volatile u32 Data_Pointer;//fix me:should be 28 bits here
|
||||
}_tx_desc;
|
||||
#else //BIG
|
||||
typedef struct rx_desc{
|
||||
union
|
||||
{
|
||||
struct
|
||||
{
|
||||
volatile u32 OWN:1;
|
||||
volatile u32 C:1;
|
||||
volatile u32 SoP:1;
|
||||
volatile u32 EoP:1;
|
||||
volatile u32 Burst_length_offset:3;
|
||||
volatile u32 byte_offset:2;
|
||||
volatile u32 reserve:7;
|
||||
volatile u32 data_length:16;
|
||||
}field;
|
||||
volatile u32 word;
|
||||
}status;
|
||||
volatile u32 Data_Pointer;
|
||||
}_rx_desc;
|
||||
|
||||
typedef struct tx_desc{
|
||||
union
|
||||
{
|
||||
struct
|
||||
{
|
||||
volatile u32 OWN:1;
|
||||
volatile u32 C:1;
|
||||
volatile u32 SoP:1;
|
||||
volatile u32 EoP:1;
|
||||
volatile u32 byte_offset:5;
|
||||
volatile u32 reserved:7;
|
||||
volatile u32 data_length:16;
|
||||
}field;
|
||||
volatile u32 word;
|
||||
}status;
|
||||
volatile u32 Data_Pointer;
|
||||
}_tx_desc;
|
||||
#endif //ENDIAN
|
||||
|
||||
typedef struct dma_channel_info{
|
||||
/*relative channel number*/
|
||||
int rel_chan_no;
|
||||
/*class for this channel for QoS*/
|
||||
int pri;
|
||||
/*specify byte_offset*/
|
||||
int byte_offset;
|
||||
/*direction*/
|
||||
int dir;
|
||||
/*irq number*/
|
||||
int irq;
|
||||
/*descriptor parameter*/
|
||||
int desc_base;
|
||||
int desc_len;
|
||||
int curr_desc;
|
||||
int prev_desc;/*only used if it is a tx channel*/
|
||||
/*weight setting for WFQ algorithm*/
|
||||
int weight;
|
||||
int default_weight;
|
||||
int packet_size;
|
||||
int burst_len;
|
||||
/*on or off of this channel*/
|
||||
int control;
|
||||
/**optional information for the upper layer devices*/
|
||||
#if defined(CONFIG_DANUBE_ETHERNET_D2) || defined(CONFIG_DANUBE_PPA)
|
||||
void* opt[64];
|
||||
#else
|
||||
void* opt[25];
|
||||
#endif
|
||||
/*Pointer to the peripheral device who is using this channel*/
|
||||
void* dma_dev;
|
||||
/*channel operations*/
|
||||
void (*open)(struct dma_channel_info* pCh);
|
||||
void (*close)(struct dma_channel_info* pCh);
|
||||
void (*reset)(struct dma_channel_info* pCh);
|
||||
void (*enable_irq)(struct dma_channel_info* pCh);
|
||||
void (*disable_irq)(struct dma_channel_info* pCh);
|
||||
}_dma_channel_info;
|
||||
|
||||
typedef struct dma_device_info{
|
||||
/*device name of this peripheral*/
|
||||
char device_name[15];
|
||||
int reserved;
|
||||
int tx_burst_len;
|
||||
int rx_burst_len;
|
||||
int default_weight;
|
||||
int current_tx_chan;
|
||||
int current_rx_chan;
|
||||
int num_tx_chan;
|
||||
int num_rx_chan;
|
||||
int max_rx_chan_num;
|
||||
int max_tx_chan_num;
|
||||
_dma_channel_info* tx_chan[20];
|
||||
_dma_channel_info* rx_chan[20];
|
||||
/*functions, optional*/
|
||||
u8* (*buffer_alloc)(int len,int* offset, void** opt);
|
||||
void (*buffer_free)(u8* dataptr, void* opt);
|
||||
int (*intr_handler)(struct dma_device_info* info, int status);
|
||||
void * priv; /* used by peripheral driver only */
|
||||
}_dma_device_info;
|
||||
|
||||
_dma_device_info* dma_device_reserve(char* dev_name);
|
||||
|
||||
void dma_device_release(_dma_device_info* dev);
|
||||
|
||||
void dma_device_register(_dma_device_info* info);
|
||||
|
||||
void dma_device_unregister(_dma_device_info* info);
|
||||
|
||||
int dma_device_read(struct dma_device_info* info, u8** dataptr, void** opt);
|
||||
|
||||
int dma_device_write(struct dma_device_info* info, u8* dataptr, int len, void* opt);
|
||||
#endif
|
||||
@ -0,0 +1,62 @@
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
|
||||
*
|
||||
* Copyright (C) 2005 infineon
|
||||
* Copyright (C) 2007 John Crispin <blogic@openwrt.org>
|
||||
*
|
||||
*/
|
||||
#ifndef _DANUBE_IRQ__
|
||||
#define _DANUBE_IRQ__
|
||||
|
||||
#define INT_NUM_IRQ0 8
|
||||
#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0)
|
||||
#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32)
|
||||
#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64)
|
||||
#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96)
|
||||
#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128)
|
||||
#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
|
||||
|
||||
#define DANUBEASC1_TIR (INT_NUM_IM3_IRL0 + 7)
|
||||
#define DANUBEASC1_RIR (INT_NUM_IM3_IRL0 + 9)
|
||||
#define DANUBEASC1_EIR (INT_NUM_IM3_IRL0 + 10)
|
||||
|
||||
#define DANUBE_TIMER6_INT (INT_NUM_IM1_IRL0 + 23)
|
||||
|
||||
#define MIPS_CPU_TIMER_IRQ 7
|
||||
|
||||
#define DANUBE_DMA_CH0_INT (INT_NUM_IM2_IRL0)
|
||||
#define DANUBE_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1)
|
||||
#define DANUBE_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2)
|
||||
#define DANUBE_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3)
|
||||
#define DANUBE_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4)
|
||||
#define DANUBE_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5)
|
||||
#define DANUBE_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6)
|
||||
#define DANUBE_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7)
|
||||
#define DANUBE_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8)
|
||||
#define DANUBE_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9)
|
||||
#define DANUBE_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10)
|
||||
#define DANUBE_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11)
|
||||
#define DANUBE_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25)
|
||||
#define DANUBE_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26)
|
||||
#define DANUBE_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27)
|
||||
#define DANUBE_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28)
|
||||
#define DANUBE_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29)
|
||||
#define DANUBE_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30)
|
||||
#define DANUBE_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16)
|
||||
#define DANUBE_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21)
|
||||
|
||||
extern void mask_and_ack_danube_irq (unsigned int irq_nr);
|
||||
|
||||
#endif
|
||||
254
target/linux/danube/files/include/asm-mips/danube/danube_mii0.h
Normal file
254
target/linux/danube/files/include/asm-mips/danube/danube_mii0.h
Normal file
@ -0,0 +1,254 @@
|
||||
#ifndef DANUBE_SW_H
|
||||
#define DANUBE_SW_H
|
||||
|
||||
|
||||
|
||||
/******************************************************************************
|
||||
**
|
||||
** FILE NAME : danube_sw.h
|
||||
** PROJECT : Danube
|
||||
** MODULES : ETH Interface (MII0)
|
||||
**
|
||||
** DATE : 11 AUG 2005
|
||||
** AUTHOR : Wu Qi Ming
|
||||
** DESCRIPTION : ETH Interface (MII0) Driver Header File
|
||||
** COPYRIGHT : Copyright (c) 2006
|
||||
** Infineon Technologies AG
|
||||
** Am Campeon 1-12, 85579 Neubiberg, Germany
|
||||
**
|
||||
** This program is free software; you can redistribute it and/or modify
|
||||
** it under the terms of the GNU General Public License as published by
|
||||
** the Free Software Foundation; either version 2 of the License, or
|
||||
** (at your option) any later version.
|
||||
**
|
||||
** HISTORY
|
||||
** $Date $Author $Comment
|
||||
** 11 AUG 2005 Wu Qi Ming Initiate Version
|
||||
** 23 OCT 2006 Xu Liang Add GPL header.
|
||||
*******************************************************************************/
|
||||
|
||||
|
||||
#define SET_ETH_SPEED_AUTO SIOCDEVPRIVATE
|
||||
#define SET_ETH_SPEED_10 SIOCDEVPRIVATE+1
|
||||
#define SET_ETH_SPEED_100 SIOCDEVPRIVATE+2
|
||||
#define SET_ETH_DUPLEX_AUTO SIOCDEVPRIVATE+3
|
||||
#define SET_ETH_DUPLEX_HALF SIOCDEVPRIVATE+4
|
||||
#define SET_ETH_DUPLEX_FULL SIOCDEVPRIVATE+5
|
||||
#define SET_ETH_REG SIOCDEVPRIVATE+6
|
||||
#define VLAN_TOOLS SIOCDEVPRIVATE+7
|
||||
#define MAC_TABLE_TOOLS SIOCDEVPRIVATE+8
|
||||
#define SET_VLAN_COS SIOCDEVPRIVATE+9
|
||||
#define SET_DSCP_COS SIOCDEVPRIVATE+10
|
||||
#define ENABLE_VLAN_CLASSIFICATION SIOCDEVPRIVATE+11
|
||||
#define DISABLE_VLAN_CLASSIFICATION SIOCDEVPRIVATE+12
|
||||
#define VLAN_CLASS_FIRST SIOCDEVPRIVATE+13
|
||||
#define VLAN_CLASS_SECOND SIOCDEVPRIVATE+14
|
||||
#define ENABLE_DSCP_CLASSIFICATION SIOCDEVPRIVATE+15
|
||||
#define DISABLE_DSCP_CLASSIFICATION SIOCDEVPRIVATE+16
|
||||
#define PASS_UNICAST_PACKETS SIOCDEVPRIVATE+17
|
||||
#define FILTER_UNICAST_PACKETS SIOCDEVPRIVATE+18
|
||||
#define KEEP_BROADCAST_PACKETS SIOCDEVPRIVATE+19
|
||||
#define DROP_BROADCAST_PACKETS SIOCDEVPRIVATE+20
|
||||
#define KEEP_MULTICAST_PACKETS SIOCDEVPRIVATE+21
|
||||
#define DROP_MULTICAST_PACKETS SIOCDEVPRIVATE+22
|
||||
|
||||
|
||||
/*===mac table commands==*/
|
||||
#define RESET_MAC_TABLE 0
|
||||
#define READ_MAC_ENTRY 1
|
||||
#define WRITE_MAC_ENTRY 2
|
||||
#define ADD_MAC_ENTRY 3
|
||||
|
||||
/*====vlan commands===*/
|
||||
|
||||
#define CHANGE_VLAN_CTRL 0
|
||||
#define READ_VLAN_ENTRY 1
|
||||
#define UPDATE_VLAN_ENTRY 2
|
||||
#define CLEAR_VLAN_ENTRY 3
|
||||
#define RESET_VLAN_TABLE 4
|
||||
#define ADD_VLAN_ENTRY 5
|
||||
|
||||
/*
|
||||
** MDIO constants.
|
||||
*/
|
||||
|
||||
#define MDIO_BASE_STATUS_REG 0x1
|
||||
#define MDIO_BASE_CONTROL_REG 0x0
|
||||
#define MDIO_PHY_ID_HIGH_REG 0x2
|
||||
#define MDIO_PHY_ID_LOW_REG 0x3
|
||||
#define MDIO_BC_NEGOTIATE 0x0200
|
||||
#define MDIO_BC_FULL_DUPLEX_MASK 0x0100
|
||||
#define MDIO_BC_AUTO_NEG_MASK 0x1000
|
||||
#define MDIO_BC_SPEED_SELECT_MASK 0x2000
|
||||
#define MDIO_STATUS_100_FD 0x4000
|
||||
#define MDIO_STATUS_100_HD 0x2000
|
||||
#define MDIO_STATUS_10_FD 0x1000
|
||||
#define MDIO_STATUS_10_HD 0x0800
|
||||
#define MDIO_STATUS_SPEED_DUPLEX_MASK 0x7800
|
||||
#define MDIO_ADVERTISMENT_REG 0x4
|
||||
#define MDIO_ADVERT_100_FD 0x100
|
||||
#define MDIO_ADVERT_100_HD 0x080
|
||||
#define MDIO_ADVERT_10_FD 0x040
|
||||
#define MDIO_ADVERT_10_HD 0x020
|
||||
#define MDIO_LINK_UP_MASK 0x4
|
||||
#define MDIO_START 0x1
|
||||
#define MDIO_READ 0x2
|
||||
#define MDIO_WRITE 0x1
|
||||
#define MDIO_PREAMBLE 0xfffffffful
|
||||
|
||||
#define PHY_RESET 0x8000
|
||||
#define AUTO_NEGOTIATION_ENABLE 0X1000
|
||||
#define AUTO_NEGOTIATION_COMPLETE 0x20
|
||||
#define RESTART_AUTO_NEGOTIATION 0X200
|
||||
|
||||
|
||||
/*ETOP_MDIO_CFG MASKS*/
|
||||
#define SMRST_MASK 0X2000
|
||||
#define PHYA1_MASK 0X1F00
|
||||
#define PHYA0_MASK 0XF8
|
||||
#define UMM1_MASK 0X4
|
||||
#define UMM0_MASK 0X2
|
||||
|
||||
/*ETOP_MDIO_ACCESS MASKS*/
|
||||
#define MDIO_RA_MASK 0X80000000
|
||||
#define MDIO_RW_MASK 0X40000000
|
||||
|
||||
|
||||
/*ENET_MAC_CFG MASKS*/
|
||||
#define BP_MASK 1<<12
|
||||
#define CGEN_MASK 1<<11
|
||||
#define IFG_MASK 0x3F<<5
|
||||
#define IPAUS_MASK 1<<4
|
||||
#define EPAUS_MASK 1<<3
|
||||
#define DUPLEX_MASK 1<<2
|
||||
#define SPEED_MASK 0x2
|
||||
#define LINK_MASK 1
|
||||
|
||||
/*ENETS_CoS_CFG MASKS*/
|
||||
#define VLAN_MASK 2
|
||||
#define DSCP_MASK 1
|
||||
|
||||
/*ENET_CFG MASKS*/
|
||||
#define VL2_MASK 1<<29
|
||||
#define FTUC_MASK 1<<25
|
||||
#define DPBC_MASK 1<<24
|
||||
#define DPMC_MASK 1<<23
|
||||
|
||||
#define PHY0_ADDR 0
|
||||
#define PHY1_ADDR 1
|
||||
#define P1M 0
|
||||
|
||||
#define DANUBE_SW_REG32(reg_num) *((volatile u32*)(reg_num))
|
||||
|
||||
#define OK 0;
|
||||
|
||||
#ifdef CONFIG_CPU_LITTLE_ENDIAN
|
||||
typedef struct mac_table_entry{
|
||||
u64 mac_address:48;
|
||||
u64 p0:1;
|
||||
u64 p1:1;
|
||||
u64 p2:1;
|
||||
u64 cr:1;
|
||||
u64 ma_st:3;
|
||||
u64 res:9;
|
||||
}_mac_table_entry;
|
||||
|
||||
typedef struct IFX_Switch_VLanTableEntry{
|
||||
u32 vlan_id:12;
|
||||
u32 mp0:1;
|
||||
u32 mp1:1;
|
||||
u32 mp2:1;
|
||||
u32 v:1;
|
||||
u32 res:16;
|
||||
}_IFX_Switch_VLanTableEntry;
|
||||
|
||||
typedef struct mac_table_req{
|
||||
int cmd;
|
||||
int index;
|
||||
u32 data;
|
||||
u64 entry_value;
|
||||
}_mac_table_req;
|
||||
|
||||
#else //not CONFIG_CPU_LITTLE_ENDIAN
|
||||
typedef struct mac_table_entry{
|
||||
u64 mac_address:48;
|
||||
u64 p0:1;
|
||||
u64 p1:1;
|
||||
u64 p2:1;
|
||||
u64 cr:1;
|
||||
u64 ma_st:3;
|
||||
u64 res:9;
|
||||
}_mac_table_entry;
|
||||
|
||||
typedef struct IFX_Switch_VLanTableEntry{
|
||||
u32 vlan_id:12;
|
||||
u32 mp0:1;
|
||||
u32 mp1:1;
|
||||
u32 mp2:1;
|
||||
u32 v:1;
|
||||
u32 res:16;
|
||||
}_IFX_Switch_VLanTableEntry;
|
||||
|
||||
|
||||
typedef struct mac_table_req{
|
||||
int cmd;
|
||||
int index;
|
||||
u32 data;
|
||||
u64 entry_value;
|
||||
}_mac_table_req;
|
||||
|
||||
#endif //CONFIG_CPU_LITTLE_ENDIAN
|
||||
|
||||
typedef struct vlan_cos_req{
|
||||
int pri;
|
||||
int cos_value;
|
||||
}_vlan_cos_req;
|
||||
|
||||
typedef struct dscp_cos_req{
|
||||
int dscp;
|
||||
int cos_value;
|
||||
}_dscp_cos_req;
|
||||
|
||||
|
||||
typedef struct vlan_req{
|
||||
int cmd;
|
||||
int index;
|
||||
u32 data;
|
||||
u32 entry_value;
|
||||
}_vlan_req;
|
||||
|
||||
typedef struct data_req{
|
||||
int index;
|
||||
u32 value;
|
||||
}_data_req;
|
||||
|
||||
enum duplex
|
||||
{
|
||||
half,
|
||||
full,
|
||||
autoneg
|
||||
};
|
||||
|
||||
struct switch_priv {
|
||||
struct net_device_stats stats;
|
||||
int rx_packetlen;
|
||||
u8 *rx_packetdata;
|
||||
int rx_status;
|
||||
int tx_packetlen;
|
||||
#ifdef CONFIG_NET_HW_FLOWCONTROL
|
||||
int fc_bit;
|
||||
#endif //CONFIG_NET_HW_FLOWCONTROL
|
||||
u8 *tx_packetdata;
|
||||
int tx_status;
|
||||
struct dma_device_info *dma_device;
|
||||
struct sk_buff *skb;
|
||||
spinlock_t lock;
|
||||
int mdio_phy_addr;
|
||||
int current_speed;
|
||||
int current_speed_selection;
|
||||
int rx_queue_len;
|
||||
int full_duplex;
|
||||
enum duplex current_duplex;
|
||||
};
|
||||
|
||||
#endif //DANUBE_SW_H
|
||||
2021
target/linux/danube/files/include/asm-mips/danube/danube_orig.h
Normal file
2021
target/linux/danube/files/include/asm-mips/danube/danube_orig.h
Normal file
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,194 @@
|
||||
/* incaAscSio.h - (DANUBE) ASC UART tty driver header */
|
||||
|
||||
#ifndef __DANUBE_ASC_H
|
||||
#define __DANUBE_ASC_H
|
||||
|
||||
/******************************************************************************
|
||||
**
|
||||
** FILE NAME : serial.c
|
||||
** PROJECT : Danube
|
||||
** MODULES : ASC/UART
|
||||
**
|
||||
** DATE : 27 MAR 2006
|
||||
** AUTHOR : Liu Peng
|
||||
** DESCRIPTION : Asynchronous Serial Channel (ASC/UART) Driver Header File
|
||||
** COPYRIGHT : Copyright (c) 2006
|
||||
** Infineon Technologies AG
|
||||
** Am Campeon 1-12, 85579 Neubiberg, Germany
|
||||
**
|
||||
** This program is free software; you can redistribute it and/or modify
|
||||
** it under the terms of the GNU General Public License as published by
|
||||
** the Free Software Foundation; either version 2 of the License, or
|
||||
** (at your option) any later version.
|
||||
**
|
||||
** HISTORY
|
||||
** $Date $Author $Comment
|
||||
** 27 MAR 2006 Liu Peng Initiate Version (rev 1.7)
|
||||
** 23 OCT 2006 Xu Liang Add GPL header.
|
||||
*******************************************************************************/
|
||||
|
||||
/* channel operating modes */
|
||||
/*#define ASCOPT_CSIZE 0x00000003
|
||||
#define ASCOPT_CS7 0x00000001
|
||||
#define ASCOPT_CS8 0x00000002
|
||||
#define ASCOPT_PARENB 0x00000004
|
||||
#define ASCOPT_STOPB 0x00000008
|
||||
#define ASCOPT_PARODD 0x00000010
|
||||
#define ASCOPT_CREAD 0x00000020
|
||||
*/
|
||||
#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8)
|
||||
|
||||
/* ASC input select (0 or 1) */
|
||||
#define CONSOLE_TTY 0
|
||||
|
||||
#define DANUBEASC_TXFIFO_FL 1
|
||||
#define DANUBEASC_RXFIFO_FL 1
|
||||
#define DANUBEASC_TXFIFO_FULL 16
|
||||
|
||||
/* interrupt lines masks for the ASC device interrupts*/
|
||||
/* change these macroses if it's necessary */
|
||||
#define DANUBEASC_IRQ_LINE_ALL 0x0000007f /* all IRQs */
|
||||
|
||||
#define DANUBEASC_IRQ_LINE_TIR 0x00000001 /* Tx Int */
|
||||
#define DANUBEASC_IRQ_LINE_TBIR 0x00000002 /* Tx Buffer Int */
|
||||
#define DANUBEASC_IRQ_LINE_RIR 0x00000004 /* Rx Int */
|
||||
#define DANUBEASC_IRQ_LINE_EIR 0x00000008 /* Error Int */
|
||||
#define DANUBEASC_IRQ_LINE_ABSTIR 0x00000010 /* Autobaud Start Int */
|
||||
#define DANUBEASC_IRQ_LINE_ABDETIP 0x00000020 /* Autobaud Detection Int */
|
||||
#define DANUBEASC_IRQ_LINE_SFCIR 0x00000040 /* Software Flow Control Int */
|
||||
|
||||
/* interrupt controller access macros */
|
||||
#define ASC_INTERRUPTS_ENABLE(X) \
|
||||
*((volatile unsigned int*) DANUBE_ICU_IM0_IER) |= X;
|
||||
#define ASC_INTERRUPTS_DISABLE(X) \
|
||||
*((volatile unsigned int*) DANUBE_ICU_IM0_IER) &= ~X;
|
||||
#define ASC_INTERRUPTS_CLEAR(X) \
|
||||
*((volatile unsigned int*) DANUBE_ICU_IM0_ISR) = X;
|
||||
|
||||
/* CLC register's bits and bitfields */
|
||||
#define ASCCLC_DISR 0x00000001
|
||||
#define ASCCLC_DISS 0x00000002
|
||||
#define ASCCLC_RMCMASK 0x0000FF00
|
||||
#define ASCCLC_RMCOFFSET 8
|
||||
|
||||
/* CON register's bits and bitfields */
|
||||
#define ASCCON_MODEMASK 0x0000000f
|
||||
#define ASCCON_M_8ASYNC 0x0
|
||||
#define ASCCON_M_8IRDA 0x1
|
||||
#define ASCCON_M_7ASYNC 0x2
|
||||
#define ASCCON_M_7IRDA 0x3
|
||||
#define ASCCON_WLSMASK 0x0000000c
|
||||
#define ASCCON_WLSOFFSET 2
|
||||
#define ASCCON_WLS_8BIT 0x0
|
||||
#define ASCCON_WLS_7BIT 0x1
|
||||
#define ASCCON_PEN 0x00000010
|
||||
#define ASCCON_ODD 0x00000020
|
||||
#define ASCCON_SP 0x00000040
|
||||
#define ASCCON_STP 0x00000080
|
||||
#define ASCCON_BRS 0x00000100
|
||||
#define ASCCON_FDE 0x00000200
|
||||
#define ASCCON_ERRCLK 0x00000400
|
||||
#define ASCCON_EMMASK 0x00001800
|
||||
#define ASCCON_EMOFFSET 11
|
||||
#define ASCCON_EM_ECHO_OFF 0x0
|
||||
#define ASCCON_EM_ECHO_AB 0x1
|
||||
#define ASCCON_EM_ECHO_ON 0x2
|
||||
#define ASCCON_LB 0x00002000
|
||||
#define ASCCON_ACO 0x00004000
|
||||
#define ASCCON_R 0x00008000
|
||||
#define ASCCON_PAL 0x00010000
|
||||
#define ASCCON_FEN 0x00020000
|
||||
#define ASCCON_RUEN 0x00040000
|
||||
#define ASCCON_ROEN 0x00080000
|
||||
#define ASCCON_TOEN 0x00100000
|
||||
#define ASCCON_BEN 0x00200000
|
||||
#define ASCCON_TXINV 0x01000000
|
||||
#define ASCCON_RXINV 0x02000000
|
||||
#define ASCCON_TXMSB 0x04000000
|
||||
#define ASCCON_RXMSB 0x08000000
|
||||
|
||||
/* STATE register's bits and bitfields */
|
||||
#define ASCSTATE_REN 0x00000001
|
||||
#define ASCSTATE_PE 0x00010000
|
||||
#define ASCSTATE_FE 0x00020000
|
||||
#define ASCSTATE_RUE 0x00040000
|
||||
#define ASCSTATE_ROE 0x00080000
|
||||
#define ASCSTATE_TOE 0x00100000
|
||||
#define ASCSTATE_BE 0x00200000
|
||||
#define ASCSTATE_TXBVMASK 0x07000000
|
||||
#define ASCSTATE_TXBVOFFSET 24
|
||||
#define ASCSTATE_TXEOM 0x08000000
|
||||
#define ASCSTATE_RXBVMASK 0x70000000
|
||||
#define ASCSTATE_RXBVOFFSET 28
|
||||
#define ASCSTATE_RXEOM 0x80000000
|
||||
#define ASCSTATE_ANY (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
|
||||
|
||||
/* WHBSTATE register's bits and bitfields */
|
||||
#define ASCWHBSTATE_CLRREN 0x00000001
|
||||
#define ASCWHBSTATE_SETREN 0x00000002
|
||||
#define ASCWHBSTATE_CLRPE 0x00000004
|
||||
#define ASCWHBSTATE_CLRFE 0x00000008
|
||||
#define ASCWHBSTATE_CLRRUE 0x00000010
|
||||
#define ASCWHBSTATE_CLRROE 0x00000020
|
||||
#define ASCWHBSTATE_CLRTOE 0x00000040
|
||||
#define ASCWHBSTATE_CLRBE 0x00000080
|
||||
#define ASCWHBSTATE_SETPE 0x00000100
|
||||
#define ASCWHBSTATE_SETFE 0x00000200
|
||||
#define ASCWHBSTATE_SETRUE 0x00000400
|
||||
#define ASCWHBSTATE_SETROE 0x00000800
|
||||
#define ASCWHBSTATE_SETTOE 0x00001000
|
||||
#define ASCWHBSTATE_SETBE 0x00002000
|
||||
|
||||
/* ABCON register's bits and bitfields */
|
||||
#define ASCABCON_ABEN 0x0001
|
||||
#define ASCABCON_AUREN 0x0002
|
||||
#define ASCABCON_ABSTEN 0x0004
|
||||
#define ASCABCON_ABDETEN 0x0008
|
||||
#define ASCABCON_FCDETEN 0x0010
|
||||
|
||||
/* FDV register mask, offset and bitfields*/
|
||||
#define ASCFDV_VALUE_MASK 0x000001FF
|
||||
|
||||
/* WHBABCON register's bits and bitfields */
|
||||
#define ASCWHBABCON_CLRABEN 0x0001
|
||||
#define ASCWHBABCON_SETABEN 0x0002
|
||||
|
||||
/* ABSTAT register's bits and bitfields */
|
||||
#define ASCABSTAT_FCSDET 0x0001
|
||||
#define ASCABSTAT_FCCDET 0x0002
|
||||
#define ASCABSTAT_SCSDET 0x0004
|
||||
#define ASCABSTAT_SCCDET 0x0008
|
||||
#define ASCABSTAT_DETWAIT 0x0010
|
||||
|
||||
/* WHBABSTAT register's bits and bitfields */
|
||||
#define ASCWHBABSTAT_CLRFCSDET 0x0001
|
||||
#define ASCWHBABSTAT_SETFCSDET 0x0002
|
||||
#define ASCWHBABSTAT_CLRFCCDET 0x0004
|
||||
#define ASCWHBABSTAT_SETFCCDET 0x0008
|
||||
#define ASCWHBABSTAT_CLRSCSDET 0x0010
|
||||
#define ASCWHBABSTAT_SETSCSDET 0x0020
|
||||
#define ASCWHBABSTAT_CLRSCCDET 0x0040
|
||||
#define ASCWHBABSTAT_SETSCCDET 0x0080
|
||||
#define ASCWHBABSTAT_CLRDETWAIT 0x0100
|
||||
#define ASCWHBABSTAT_SETDETWAIT 0x0200
|
||||
|
||||
/* TXFCON register's bits and bitfields */
|
||||
#define ASCTXFCON_TXFIFO1 0x00000400
|
||||
#define ASCTXFCON_TXFEN 0x0001
|
||||
#define ASCTXFCON_TXFFLU 0x0002
|
||||
#define ASCTXFCON_TXFITLMASK 0x3F00
|
||||
#define ASCTXFCON_TXFITLOFF 8
|
||||
|
||||
/* RXFCON register's bits and bitfields */
|
||||
#define ASCRXFCON_RXFIFO1 0x00000400
|
||||
#define ASCRXFCON_RXFEN 0x0001
|
||||
#define ASCRXFCON_RXFFLU 0x0002
|
||||
#define ASCRXFCON_RXFITLMASK 0x3F00
|
||||
#define ASCRXFCON_RXFITLOFF 8
|
||||
|
||||
/* FSTAT register's bits and bitfields */
|
||||
#define ASCFSTAT_RXFFLMASK 0x003F
|
||||
#define ASCFSTAT_TXFFLMASK 0x3F00
|
||||
#define ASCFSTAT_TXFFLOFF 8
|
||||
|
||||
#endif /* __DANUBE_ASC_H */
|
||||
@ -0,0 +1,8 @@
|
||||
#ifndef __DANUBE_IRQ_H
|
||||
#define __DANUBE_IRQ_H
|
||||
|
||||
#define NR_IRQS 256
|
||||
#include_next <irq.h>
|
||||
|
||||
#endif
|
||||
|
||||
34
target/linux/danube/image/Makefile
Normal file
34
target/linux/danube/image/Makefile
Normal file
@ -0,0 +1,34 @@
|
||||
#
|
||||
# Copyright (C) 2006 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
include $(TOPDIR)/rules.mk
|
||||
include $(INCLUDE_DIR)/image.mk
|
||||
|
||||
define Image/BuildKernel
|
||||
$(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma
|
||||
mkimage -A mips -O linux -T kernel -a 0x80002000 -C lzma -e \
|
||||
0x80002000 \
|
||||
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
|
||||
-d $(KDIR)/vmlinux.lzma $(KDIR)/uImage
|
||||
|
||||
cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage
|
||||
endef
|
||||
|
||||
define Image/Build/squashfs
|
||||
cat $(KDIR)/uImage $(KDIR)/root.$(1) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image
|
||||
$(call prepare_generic_squashfs,$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image)
|
||||
endef
|
||||
|
||||
define Image/Build/jffs2-64k
|
||||
dd if=$(KDIR)/uImage of=$(KDIR)/uImage.$(1) bs=64k conv=sync
|
||||
cat $(KDIR)/uImage.$(1) $(KDIR)/root.$(1) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image
|
||||
endef
|
||||
|
||||
define Image/Build
|
||||
$(call Image/Build/$(1),$(1))
|
||||
endef
|
||||
|
||||
$(eval $(call BuildImage))
|
||||
66
target/linux/danube/patches/100-board.patch
Normal file
66
target/linux/danube/patches/100-board.patch
Normal file
@ -0,0 +1,66 @@
|
||||
Index: linux-2.6.23/arch/mips/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.23.orig/arch/mips/Kconfig 2007-10-16 22:12:19.000000000 +0200
|
||||
+++ linux-2.6.23/arch/mips/Kconfig 2007-10-16 22:12:21.000000000 +0200
|
||||
@@ -58,6 +58,17 @@
|
||||
select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
select GENERIC_HARDIRQS_NO__DO_IRQ
|
||||
|
||||
+config DANUBE
|
||||
+ bool "Danube support"
|
||||
+ select DMA_NONCOHERENT
|
||||
+ select IRQ_CPU
|
||||
+ select SYS_HAS_CPU_MIPS32_R1
|
||||
+ select HAVE_STD_PC_SERIAL_PORT
|
||||
+ select SYS_SUPPORTS_BIG_ENDIAN
|
||||
+ select SYS_SUPPORTS_32BIT_KERNEL
|
||||
+ select SYS_HAS_EARLY_PRINTK
|
||||
+ select HW_HAS_PCI
|
||||
+
|
||||
config MACH_DECSTATION
|
||||
bool "DECstations"
|
||||
select BOOT_ELF32
|
||||
@@ -605,6 +615,7 @@
|
||||
source "arch/mips/tx4927/Kconfig"
|
||||
source "arch/mips/tx4938/Kconfig"
|
||||
source "arch/mips/vr41xx/Kconfig"
|
||||
+source "arch/mips/danube/Kconfig"
|
||||
|
||||
endmenu
|
||||
|
||||
Index: linux-2.6.23/arch/mips/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.23.orig/arch/mips/Makefile 2007-10-16 22:12:21.000000000 +0200
|
||||
+++ linux-2.6.23/arch/mips/Makefile 2007-10-16 22:12:21.000000000 +0200
|
||||
@@ -276,6 +276,13 @@
|
||||
cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/mach-cobalt
|
||||
load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
|
||||
|
||||
+#
|
||||
+# Infineon DANUBE
|
||||
+#
|
||||
+core-$(CONFIG_DANUBE) += arch/mips/danube/
|
||||
+cflags-$(CONFIG_DANUBE) += -Iinclude/asm-mips/mach-danube
|
||||
+load-$(CONFIG_DANUBE) += 0xffffffff80002000
|
||||
+
|
||||
#
|
||||
# DECstation family
|
||||
#
|
||||
Index: linux-2.6.23/include/asm-mips/bootinfo.h
|
||||
===================================================================
|
||||
--- linux-2.6.23.orig/include/asm-mips/bootinfo.h 2007-10-16 22:12:19.000000000 +0200
|
||||
+++ linux-2.6.23/include/asm-mips/bootinfo.h 2007-10-16 22:12:21.000000000 +0200
|
||||
@@ -208,6 +208,13 @@
|
||||
#define MACH_GROUP_WINDRIVER 28 /* Windriver boards */
|
||||
#define MACH_WRPPMC 1
|
||||
|
||||
+/*
|
||||
+ * Valid machtype for group ATHEROS
|
||||
+ */
|
||||
+#define MACH_GROUP_DANUBE 29
|
||||
+#define MACH_INFINEON_DANUBE 0
|
||||
+
|
||||
+
|
||||
#define CL_SIZE COMMAND_LINE_SIZE
|
||||
|
||||
const char *get_system_type(void);
|
||||
68
target/linux/danube/patches/110-drivers.patch
Normal file
68
target/linux/danube/patches/110-drivers.patch
Normal file
@ -0,0 +1,68 @@
|
||||
Index: linux-2.6.23/drivers/serial/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.23.orig/drivers/serial/Kconfig 2007-11-04 17:29:22.000000000 +0100
|
||||
+++ linux-2.6.23/drivers/serial/Kconfig 2007-11-04 17:29:25.000000000 +0100
|
||||
@@ -1259,4 +1259,10 @@
|
||||
Currently, only 8250 compatible ports are supported, but
|
||||
others can easily be added.
|
||||
|
||||
+config SERIAL_DANUBE
|
||||
+ bool "Danube serial driver"
|
||||
+ depends on DANUBE
|
||||
+ help
|
||||
+ Driver for the danubes built in ASC hardware
|
||||
+
|
||||
endmenu
|
||||
Index: linux-2.6.23/drivers/serial/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.23.orig/drivers/serial/Makefile 2007-11-04 17:29:22.000000000 +0100
|
||||
+++ linux-2.6.23/drivers/serial/Makefile 2007-11-04 17:29:25.000000000 +0100
|
||||
@@ -64,3 +64,4 @@
|
||||
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
|
||||
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
|
||||
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
|
||||
+obj-$(CONFIG_SERIAL_DANUBE) += danube_asc.o
|
||||
Index: linux-2.6.23/drivers/mtd/maps/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.23.orig/drivers/mtd/maps/Makefile 2007-11-04 17:29:22.000000000 +0100
|
||||
+++ linux-2.6.23/drivers/mtd/maps/Makefile 2007-11-04 17:29:25.000000000 +0100
|
||||
@@ -71,3 +71,4 @@
|
||||
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
|
||||
obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
|
||||
obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
|
||||
+obj-$(CONFIG_MTD_DANUBE) += danube.o
|
||||
Index: linux-2.6.23/drivers/net/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.23.orig/drivers/net/Kconfig 2007-11-04 17:29:25.000000000 +0100
|
||||
+++ linux-2.6.23/drivers/net/Kconfig 2007-11-11 16:48:24.000000000 +0100
|
||||
@@ -339,6 +339,18 @@
|
||||
|
||||
source "drivers/net/arm/Kconfig"
|
||||
|
||||
+config DANUBE_MII0
|
||||
+ tristate "Infineon Danube eth0 driver"
|
||||
+ depends on DANUBE
|
||||
+ help
|
||||
+ Support for the MII0 inside the Danube SOC
|
||||
+
|
||||
+config DANUBE_MII1
|
||||
+ tristate "Infineon Danube eth1 driver"
|
||||
+ depends on DANUBE
|
||||
+ help
|
||||
+ Support for the MII1 inside the Danube SOC
|
||||
+
|
||||
config AX88796
|
||||
tristate "ASIX AX88796 NE2000 clone support"
|
||||
depends on ARM || MIPS
|
||||
Index: linux-2.6.23/drivers/net/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.23.orig/drivers/net/Makefile 2007-11-04 17:29:25.000000000 +0100
|
||||
+++ linux-2.6.23/drivers/net/Makefile 2007-11-11 16:47:14.000000000 +0100
|
||||
@@ -208,6 +208,7 @@
|
||||
obj-$(CONFIG_FEC_8XX) += fec_8xx/
|
||||
obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
|
||||
obj-$(CONFIG_MLX4_CORE) += mlx4/
|
||||
+obj-$(CONFIG_DANUBE_MII0) += danube_mii0.o
|
||||
|
||||
obj-$(CONFIG_MACB) += macb.o
|
||||
|
||||
15
target/linux/danube/patches/160-cfi-swap.patch
Normal file
15
target/linux/danube/patches/160-cfi-swap.patch
Normal file
@ -0,0 +1,15 @@
|
||||
Index: linux-2.6.23/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
===================================================================
|
||||
--- linux-2.6.23.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2007-11-02 23:02:29.000000000 +0100
|
||||
+++ linux-2.6.23/drivers/mtd/chips/cfi_cmdset_0002.c 2007-11-02 23:07:15.000000000 +0100
|
||||
@@ -1007,7 +1007,9 @@
|
||||
int ret = 0;
|
||||
map_word oldd;
|
||||
int retry_cnt = 0;
|
||||
-
|
||||
+#ifdef CONFIG_DANUBE
|
||||
+ adr ^= 2;
|
||||
+#endif
|
||||
adr += chip->start;
|
||||
|
||||
spin_lock(chip->mutex);
|
||||
88
target/linux/danube/series
Normal file
88
target/linux/danube/series
Normal file
@ -0,0 +1,88 @@
|
||||
Makefile
|
||||
base-files/etc/config/network
|
||||
config-2.6.23
|
||||
files/arch/mips/danube/Kconfig
|
||||
files/arch/mips/danube/Makefile
|
||||
files/arch/mips/danube/built-in.o
|
||||
files/arch/mips/danube/dma-core.c
|
||||
files/arch/mips/danube/dma-core.h
|
||||
files/arch/mips/danube/dma-core.o
|
||||
files/arch/mips/danube/interrupt.c
|
||||
files/arch/mips/danube/interrupt.o
|
||||
files/arch/mips/danube/kgdb_serial.c
|
||||
files/arch/mips/danube/pci.c
|
||||
files/arch/mips/danube/prom.c
|
||||
files/arch/mips/danube/prom.o
|
||||
files/arch/mips/danube/reset.c
|
||||
files/arch/mips/danube/reset.o
|
||||
files/arch/mips/danube/setup.c
|
||||
files/arch/mips/danube/setup.o
|
||||
files/drivers/mtd/maps/danube.c
|
||||
files/drivers/serial/danube_asc.c
|
||||
files/drivers/serial/danube_asc.c~
|
||||
files/drivers/serial/danube_asc.o
|
||||
files/include/asm-mips/danube/adm6996.h
|
||||
files/include/asm-mips/danube/atm_mib.h
|
||||
files/include/asm-mips/danube/danube.h
|
||||
files/include/asm-mips/danube/danube_bcu.h
|
||||
files/include/asm-mips/danube/danube_cgu.h
|
||||
files/include/asm-mips/danube/danube_deu.h
|
||||
files/include/asm-mips/danube/danube_deu_structs.h
|
||||
files/include/asm-mips/danube/danube_dma.h
|
||||
files/include/asm-mips/danube/danube_eth2.h
|
||||
files/include/asm-mips/danube/danube_eth2_fw.h
|
||||
files/include/asm-mips/danube/danube_eth2_fw_with_dplus.h
|
||||
files/include/asm-mips/danube/danube_eth2_fw_with_dplus_sb.h
|
||||
files/include/asm-mips/danube/danube_eth_d2.h
|
||||
files/include/asm-mips/danube/danube_eth_fw_d2.h
|
||||
files/include/asm-mips/danube/danube_gpio.h
|
||||
files/include/asm-mips/danube/danube_gptu.h
|
||||
files/include/asm-mips/danube/danube_icu.h
|
||||
files/include/asm-mips/danube/danube_led.h
|
||||
files/include/asm-mips/danube/danube_mei.h
|
||||
files/include/asm-mips/danube/danube_mei_app.h
|
||||
files/include/asm-mips/danube/danube_mei_app_ioctl.h
|
||||
files/include/asm-mips/danube/danube_mei_bsp.h
|
||||
files/include/asm-mips/danube/danube_mei_ioctl.h
|
||||
files/include/asm-mips/danube/danube_mei_linux.h
|
||||
files/include/asm-mips/danube/danube_misc.h
|
||||
files/include/asm-mips/danube/danube_pmu.h
|
||||
files/include/asm-mips/danube/danube_ppa_api.h
|
||||
files/include/asm-mips/danube/danube_ppa_eth_fw_d2.h
|
||||
files/include/asm-mips/danube/danube_ppa_eth_fw_d3.h
|
||||
files/include/asm-mips/danube/danube_ppa_hook.h
|
||||
files/include/asm-mips/danube/danube_ppa_ppe_d3_hal.h
|
||||
files/include/asm-mips/danube/danube_ppa_ppe_hal.h
|
||||
files/include/asm-mips/danube/danube_ppa_stack_al.h
|
||||
files/include/asm-mips/danube/danube_ppe.h
|
||||
files/include/asm-mips/danube/danube_ppe_fw.h
|
||||
files/include/asm-mips/danube/danube_ppe_fw_fix_for_pci.h
|
||||
files/include/asm-mips/danube/danube_rcu.h
|
||||
files/include/asm-mips/danube/danube_sdio_controller.h
|
||||
files/include/asm-mips/danube/danube_sdio_controller_registers.h
|
||||
files/include/asm-mips/danube/danube_ssc.h
|
||||
files/include/asm-mips/danube/danube_sw.h
|
||||
files/include/asm-mips/danube/danube_wdt.h
|
||||
files/include/asm-mips/danube/danube_ws.h
|
||||
files/include/asm-mips/danube/emulation.h
|
||||
files/include/asm-mips/danube/ifx_mps.h
|
||||
files/include/asm-mips/danube/ifx_peripheral_definitions.h
|
||||
files/include/asm-mips/danube/ifx_sd_card.h
|
||||
files/include/asm-mips/danube/ifx_serial.h
|
||||
files/include/asm-mips/danube/ifx_ssc.h
|
||||
files/include/asm-mips/danube/ifx_ssc_defines.h
|
||||
files/include/asm-mips/danube/ifx_types.h
|
||||
files/include/asm-mips/danube/infineon_sdio.h
|
||||
files/include/asm-mips/danube/infineon_sdio_card.h
|
||||
files/include/asm-mips/danube/infineon_sdio_cmds.h
|
||||
files/include/asm-mips/danube/infineon_sdio_controller.h
|
||||
files/include/asm-mips/danube/irq.h
|
||||
files/include/asm-mips/danube/memcopy.h
|
||||
files/include/asm-mips/danube/mps.h
|
||||
files/include/asm-mips/danube/port.h
|
||||
files/include/asm-mips/danube/ppe.h
|
||||
files/include/asm-mips/danube/serial.h
|
||||
files/include/asm-mips/mach-danube/irq.h
|
||||
image/Makefile
|
||||
patches/100-board.patch
|
||||
patches/110-drivers.patch
|
||||
Loading…
Reference in New Issue
Block a user