1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 15:06:47 +02:00

ar71xx: register RTL8366RB switch on the TL-WR1043NB board

Thanks to Andrew Tarabaras.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19839 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg 2010-02-24 13:39:18 +00:00
parent bff27227c1
commit 86143fe010

View File

@ -10,7 +10,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/rtl8366rb.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "machtype.h"
@ -29,6 +30,9 @@
#define TL_WR1043ND_GPIO_BTN_RESET 3
#define TL_WR1043ND_GPIO_BTN_QSS 7
#define TL_WR1043ND_GPIO_RTL8366_SDA 18
#define TL_WR1043ND_GPIO_RTL8366_SCK 19
#define TL_WR1043ND_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
@ -104,6 +108,19 @@ static struct gpio_button tl_wr1043nd_gpio_buttons[] __initdata = {
}
};
static struct rtl8366rb_platform_data tl_wr1043nd_rtl8366rb_data = {
.gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA,
.gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK,
};
static struct platform_device tl_wr1043nd_rtl8366rb_device = {
.name = RTL8366RB_DRIVER_NAME,
.id = -1,
.dev = {
.platform_data = &tl_wr1043nd_rtl8366rb_data,
}
};
static void __init tl_wr1043nd_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
@ -111,8 +128,7 @@ static void __init tl_wr1043nd_setup(void)
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev;
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.phy_mask = 0x0;
ar71xx_eth0_data.speed = SPEED_1000;
@ -128,9 +144,12 @@ static void __init tl_wr1043nd_setup(void)
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
tl_wr1043nd_leds_gpio);
platform_device_register(&tl_wr1043nd_rtl8366rb_device);
ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(tl_wr1043nd_gpio_buttons),
tl_wr1043nd_gpio_buttons);
ar913x_add_device_wmac(eeprom, mac);
}