qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-05 04:35:19 +02:00
Code

[ar7] add some missing patches to acx-mac80211 it now builds the pci module as well

Browse Source 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20020 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
florian 2010-03-06 22:33:13 +00:00
parent 1a467d902b
commit 875b899bb6
2 changed files with 62 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
package/acx-mac80211/patches/003-build_as_modules.patch Normal file
View File

@ -0,0 +1,13 @@
Index: acx-mac80211-20100302/Makefile
===================================================================
--- acx-mac80211-20100302.orig/Makefile 2010-03-06 22:13:23.000000000 +0100
+++ acx-mac80211-20100302/Makefile 2010-03-06 22:13:28.000000000 +0100
@@ -29,7 +29,7 @@
acx-mac80211-obj-$(CONFIG_ACX_MAC80211_PCI) += pci.o
acx-mac80211-obj-$(CONFIG_ACX_MAC80211_USB) += usb.o
acx-mac80211-obj-$(CONFIG_ACX_MAC80211_MEM) += mem.o
- acx-mac80211-objs := common.o $(acx-mac80211-obj-y)
+ acx-mac80211-objs := common.o $(acx-mac80211-obj-m)
else
# Otherwise we were called directly from the command line: the kernel build

49
package/acx-mac80211/patches/004-vlynq_fixes.patch Normal file
View File

@ -0,0 +1,49 @@
Index: acx-mac80211-20100302/pci.c
===================================================================
--- acx-mac80211-20100302.orig/pci.c 2010-03-06 22:22:02.000000000 +0100
+++ acx-mac80211-20100302/pci.c 2010-03-06 22:22:29.000000000 +0100
@@ -4309,7 +4309,7 @@
addr = (u32)ioremap(vdev->mem_start, 0x1000);
if (!addr) {
printk(KERN_ERR "acx: %s: failed to remap io memory\n",
- vdev->dev.bus_id);
+ dev_name(&vdev->dev));
result = -ENXIO;
goto fail;
}
@@ -4323,7 +4323,7 @@
ieee = ieee80211_alloc_hw(sizeof(struct acx_device), &acxpci_hw_ops);
if (!ieee) {
printk("acx: could not allocate ieee80211 structure %s\n",
- vdev->dev.bus_id);
+ dev_name(&vdev->dev));
goto fail_alloc_netdev;
}
ieee->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
@@ -4365,7 +4365,7 @@
printk("acx: found %s-based wireless network card at %s, irq:%d, "
"phymem:0x%x, mem:0x%p\n",
- match->name, vdev->dev.bus_id, adev->irq,
+ match->name, dev_name(&vdev->dev), adev->irq,
vdev->mem_start, adev->iobase);
log(L_ANY, "acx: the initial debug setting is 0x%04X\n", acx_debug);
@@ -4416,7 +4416,7 @@
* firmware operations happening in parallel or uninitialized data */
- acx_proc_register_entries(ieee);
+ acx_proc_register_entries(ieee, 0);
/* Now we have our device, so make sure the kernel doesn't try
* to send packets even though we're not associated to a network yet */
@@ -4536,7 +4536,7 @@
CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
}
- acx_proc_unregister_entries(adev->ieee);
+ acx_proc_unregister_entries(adev->ieee, 0);
/* finally, clean up PCI bus state */
acxpci_s_delete_dma_regions(adev);