First stage of update for at91 devices to 2.6.25.10 kernel

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2024-12-25 03:01:09 +02:00 · 2008-07-04 16:05:00 +00:00 · 2008-07-04 16:05:00 +00:00 · 87bde5d7d3
commit 87bde5d7d3
parent 929b77d999
9 changed files with 13959 additions and 1 deletions
--- a/target/linux/at91/Makefile
+++ b/target/linux/at91/Makefile
@ -11,7 +11,7 @@ BOARD:=at91
 BOARDNAME:=Atmel AT91
 FEATURES:=squashfs usb

-LINUX_VERSION:=2.6.21.7
+LINUX_VERSION:=2.6.25.10

 include $(INCLUDE_DIR)/target.mk

--- a/target/linux/at91/config-2.6.25
+++ b/target/linux/at91/config-2.6.25
@ -0,0 +1,306 @@
+# CONFIG_AEABI is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_AT91CAP9 is not set
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91RM9200DK is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91X40 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_ORION is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARM=y
+CONFIG_ARM_AT91_ETHER=m
+CONFIG_ARM_THUMB=y
+# CONFIG_ARPD is not set
+# CONFIG_ARTHUR is not set
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+CONFIG_AT91_PMC_UNIT=y
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_SPI=y
+# CONFIG_AT91_SPIDEV is not set
+CONFIG_AT91_TIMER_HZ=128
+# CONFIG_ATMEL_PWM is not set
+# CONFIG_ATMEL_SSC is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BITREVERSE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_BONDING is not set
+CONFIG_BOUNCE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_BT is not set
+CONFIG_CLASSIC_RCU=y
+CONFIG_CPU_32=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_DATAFLASH_ALWAYS_ADD_DEVICE is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DM9000 is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_IDE is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_HZ=128
+# CONFIG_I2C is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_ALIX is not set
+CONFIG_LEDS_CPU=y
+# CONFIG_LEDS_GPIO is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_LLC2 is not set
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_CHUB is not set
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_HOMEMATIC is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_ONEARM is not set
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_SWEDATMS is not set
+# CONFIG_MACH_TT9200 is not set
+CONFIG_MACH_VLINK=y
+CONFIG_MII=m
+CONFIG_MMC=m
+CONFIG_MMC_AT91=m
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_AFS_PARTS is not set
+CONFIG_MTD_AT91_DATAFLASH=y
+CONFIG_MTD_AT91_PARTS=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
+# CONFIG_MTD_ROOTFS_SPLIT is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_RTSP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_RTSP is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NVRAM is not set
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_PPPOATM is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SDIO_UART is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIO=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SLABINFO=y
+# CONFIG_SMC91X is not set
+# CONFIG_SOUND is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_UID16=y
+CONFIG_USB=m
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_LIBUSUAL=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SPEEDTOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_UEAGLEATM is not set
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VGASTATE is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_W1 is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_XIP_KERNEL is not set
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
--- a/target/linux/at91/patches-2.6.25/000-at91patches.patch
+++ b/target/linux/at91/patches-2.6.25/000-at91patches.patch
--- a/target/linux/at91/patches-2.6.25/001-vlink-machine.patch
+++ b/target/linux/at91/patches-2.6.25/001-vlink-machine.patch
@ -0,0 +1,229 @@
+--- linux-2.6.25.10.n/arch/arm/mach-at91/Kconfig	2008-07-04 13:07:01.000000000 +0200
+++ linux-2.6.25.10/arch/arm/mach-at91/Kconfig	2008-07-03 13:44:35.000000000 +0200
+@@ -151,6 +151,12 @@
+ 	help
+ 	  Select this if you are using Toptech's TT9200 board.
+ 
+config MACH_VLINK
+	bool "Figment Design Labs VersaLink"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using FDL's VersaLink board
+
+ endif
+ 
+ # ----------------------------------------------------------
+--- linux-2.6.25.10.n/arch/arm/mach-at91/Makefile	2008-07-04 13:05:05.000000000 +0200
+++ linux-2.6.25.10/arch/arm/mach-at91/Makefile	2008-07-03 13:44:35.000000000 +0200
+@@ -29,6 +29,7 @@
+ obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
+ obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
+ obj-$(CONFIG_MACH_CHUB)		+= board-chub.o
+obj-$(CONFIG_MACH_VLINK)	+= board-vlink.o
+ obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
+ obj-$(CONFIG_MACH_HOMEMATIC)	+= board-homematic.o
+ obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
+--- linux-2.6.25.10.n/arch/arm/mach-at91/board-vlink.c	2008-07-04 13:06:19.000000000 +0200
+++ linux-2.6.25.10/arch/arm/mach-at91/board-vlink.c	2008-07-04 12:45:48.000000000 +0200
+@@ -0,0 +1,201 @@
+/*
+ * linux/arch/arm/mach-at91/board-vlink.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006,2007 Guthrie Consulting
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mc.h>
+
+#include "generic.h"
+
+
+static void __init vlink_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PC14, AT91_PIN_PC15);
+
+	/* Setup serial ports */
+	
+	/* DBGU on ttyS0. (RX and TX only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DSR, DTR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS 
+			| ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR
+			| ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART0 on ttys2. (Rx, Tx, CTS, RTS, DTR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US0, 2, ATMEL_UART_CTS
+			| ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART3 on ttyS3. (Rx, Tx, CTS, RTS, DTR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS
+			| ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART2 on ttyS4. (Rx and Tx only) */
+	at91_register_uart(AT91RM9200_ID_US2, 4, 0);
+
+	/* Console on ttyS0 (ie DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init vlink_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata vlink_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC4,
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata vlink_usbh_data = {
+	.ports		= 1,
+};
+
+/*
+static struct at91_udc_data __initdata vlink_udc_data = {
+	.vbus_pin	= AT91_PIN_PD4,
+	.pullup_pin	= AT91_PIN_PD5,
+};
+*/
+
+static struct at91_mmc_data __initdata vlink_mmc_data = {
+//	.det_pin	= AT91_PIN_PB27,
+	.slot_b		= 0,
+	.wire4		= 1,
+//	.wp_pin		= AT91_PIN_PA17,
+};
+
+static struct spi_board_info vlink_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+	},
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 3,
+		.max_speed_hz	= 15 * 1000 * 1000,
+	},
+#endif
+};
+
+/*static struct at91_gpio_led vlink_leds[] = {
+	{
+		.name		= "led0",
+		.gpio		= AT91_PIN_PC14,
+		.trigger	= "heartbeat",
+	},
+	{
+		.name		= "led1",
+		.gpio		= AT91_PIN_PC15,
+		.trigger	= "timer",
+	}
+};
+*/
+
+static void __init vlink_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&vlink_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&vlink_usbh_data);
+	/* USB Device */
+//	at91_add_device_udc(&vlink_udc_data);
+//	at91_set_multi_drive(vlink_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
+	/* I2C */
+//	at91_add_device_i2c();
+	/* SPI */
+	at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices));
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+	/* DataFlash card */
+//	at91_set_gpio_output(AT91_PIN_PB22, 0);
+#else
+	/* MMC */
+//	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
+	at91_add_device_mmc(0, &vlink_mmc_data);
+#endif
+	/* LEDs */
+//	at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
+
+/* Other LED's */
+       at91_set_gpio_output(AT91_PIN_PC7, 1);  // LED FRONT AP1
+       at91_set_gpio_output(AT91_PIN_PC8, 1);  // LED FRONT BP1
+       at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
+       at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
+       at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
+       at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
+
+/* SIM Cards */
+       at91_set_gpio_output(AT91_PIN_PB9, 1);  // ENBSC3
+       at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
+       at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1
+
+/* GSM Module Control */
+       at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
+
+/* Test jig presence detection */
+       at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT
+
+/* Power indicator */
+       at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND
+
+/* USB Device control */
+       at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
+       at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
+			 at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
+
+}
+
+MACHINE_START(VLINK, "FDL VersaLink")
+	/* Maintainer: Guthrie Consulting */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= vlink_map_io,
+	.init_irq	= vlink_init_irq,
+	.init_machine	= vlink_board_init,
+MACHINE_END
--- a/target/linux/at91/patches-2.6.25/007-mtd-partition.patch
+++ b/target/linux/at91/patches-2.6.25/007-mtd-partition.patch
@ -0,0 +1,42 @@
+Index: linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mtd/devices/at91_dataflash.c
+++ linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
+@@ -175,7 +175,7 @@ static struct mtd_partition static_parti
+ };
+ #endif
+ 
+-static const char *part_probes[] = { "cmdlinepart", NULL, };
+static const char *part_probes[] = { "cmdlinepart", "at91part", NULL, };
+ 
+ #endif
+ 
+Index: linux-2.6.22.19/drivers/mtd/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mtd/Kconfig
+++ linux-2.6.22.19/drivers/mtd/Kconfig
+@@ -168,6 +168,12 @@ config MTD_AFS_PARTS
+	  the partition map from the children of the flash node,
+	  as described in Documentation/powerpc/booting-without-of.txt.
+ 
+config MTD_AT91_PARTS
+	tristate "Atmel AT91 partitioning support"
+	depends on MTD_PARTITIONS && ARCH_AT91RM9200 && AT91_SPI
+	---help---
+	  Atmel AT91 partitioning support
+	
+ comment "User Modules And Translation Layers"
+ 
+ config MTD_CHAR
+Index: linux-2.6.22.19/drivers/mtd/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mtd/Makefile
+++ linux-2.6.22.19/drivers/mtd/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
+obj-$(CONFIG_MTD_AT91_PARTS)   += at91part.o
+ 
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
--- a/target/linux/at91/patches-2.6.25/008-fdl-serial.patch
+++ b/target/linux/at91/patches-2.6.25/008-fdl-serial.patch
@ -0,0 +1,161 @@
+--- linux-2.6.25.10.old/drivers/serial/atmel_serial.c	2008-07-04 14:21:12.000000000 +0200
+++ linux-2.6.25.10/drivers/serial/atmel_serial.c	2008-07-04 14:55:37.000000000 +0200
+@@ -214,6 +214,34 @@
+ 				at91_set_gpio_value(AT91_PIN_PA21, 0);
+ 			else
+ 				at91_set_gpio_value(AT91_PIN_PA21, 1);
+
+			/*
+ 			 * FDL VersaLink adds GPIOS to provide full modem 
+			 * control on USART 0 - Drive DTR and RI pins manually
+ 			 */
+			if (mctrl & TIOCM_DTR)
+				at91_set_gpio_value(AT91_PIN_PB6, 0);
+			else
+				at91_set_gpio_value(AT91_PIN_PB6, 1);
+			if (mctrl & TIOCM_RI)
+				at91_set_gpio_value(AT91_PIN_PB7, 0);
+			else
+				at91_set_gpio_value(AT91_PIN_PB7, 1);
+		}
+
+		/*
+		 * FDL VersaLink adds GPIOS to provide full modem control on
+		 * USART 3 - Drive DTR and RI pins manually
+		 */
+		if (port->mapbase == AT91RM9200_BASE_US3) {
+			if (mctrl & TIOCM_DTR)
+				at91_set_gpio_value(AT91_PIN_PB29, 0);
+			else
+				at91_set_gpio_value(AT91_PIN_PB29, 1);
+			if (mctrl & TIOCM_RI)
+				at91_set_gpio_value(AT91_PIN_PB2, 0);
+			else
+				at91_set_gpio_value(AT91_PIN_PB2, 1);
+ 		}
+ 	}
+ #endif
+@@ -251,8 +279,10 @@
+ 	/*
+ 	 * The control signals are active low.
+ 	 */
+-	if (!(status & ATMEL_US_DCD))
+-		ret |= TIOCM_CD;
+
+	if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3))
+		if (!(status & ATMEL_US_DCD))
+			ret |= TIOCM_CD;
+ 	if (!(status & ATMEL_US_CTS))
+ 		ret |= TIOCM_CTS;
+ 	if (!(status & ATMEL_US_DSR))
+@@ -260,6 +290,16 @@
+ 	if (!(status & ATMEL_US_RI))
+ 		ret |= TIOCM_RI;
+ 
+	/*
+ 	 * Read the GPIO's for the FDL VersaLink special case
+	 */
+	if (port->mapbase == AT91RM9200_BASE_US0)
+		if (!(at91_get_gpio_value(AT91_PIN_PA19)))
+			ret |= TIOCM_CD;
+	if (port->mapbase == AT91RM9200_BASE_US3)
+		if (!(at91_get_gpio_value(AT91_PIN_PA24)))
+			ret |= TIOCM_CD;
+
+ 	return ret;
+ }
+ 
+@@ -453,6 +493,34 @@
+ }
+ 
+ /*
+ * USART0 DCD Interrupt handler
+ */
+
+static irqreturn_t atmel_u0_DCD_interrupt(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	int status = at91_get_gpio_value(irq);
+
+	uart_handle_dcd_change(port, !(status));
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * USART3 DCD Interrupt handler
+ */
+
+static irqreturn_t atmel_u3_DCD_interrupt(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	int status = at91_get_gpio_value(irq);
+
+	uart_handle_dcd_change(port, !(status));
+
+	return IRQ_HANDLED;
+}
+
+/*
+  * receive interrupt handler.
+  */
+ static void
+@@ -815,6 +883,23 @@
+ 		return retval;
+ 	}
+ 
+        if (port->mapbase == AT91RM9200_BASE_US0) {
+                retval = request_irq(AT91_PIN_PA19, atmel_u0_DCD_interrupt, 0, "atmel_serial", port);
+                if (retval) {
+                        printk("atmel_serial: atmel_startup - Can't get u0DCD irq\n");
+                        free_irq(port->irq, port);
+                        return retval;
+                }
+        }
+        if (port->mapbase == AT91RM9200_BASE_US3) {
+                retval = request_irq(AT91_PIN_PA24, atmel_u3_DCD_interrupt, 0, "atmel_serial", port);
+                if (retval) {
+                        printk("atmel_serial: atmel_startup - Can't get u3DCD irq\n");
+                        free_irq(port->irq, port);
+                        return retval;
+                }
+        }
+
+ 	/*
+ 	 * Initialize DMA (if necessary)
+ 	 */
+@@ -834,6 +919,10 @@
+ 					kfree(atmel_port->pdc_rx[0].buf);
+ 				}
+ 				free_irq(port->irq, port);
+				if (port->mapbase == AT91RM9200_BASE_US0)
+					free_irq(AT91_PIN_PA19, port);
+				if (port->mapbase == AT91RM9200_BASE_US3)
+					free_irq(AT91_PIN_PA24, port);
+ 				return -ENOMEM;
+ 			}
+ 			pdc->dma_addr = dma_map_single(port->dev,
+@@ -873,7 +962,11 @@
+ 		retval = atmel_open_hook(port);
+ 		if (retval) {
+ 			free_irq(port->irq, port);
+-			return retval;
+			if (port->mapbase == AT91RM9200_BASE_US0)
+				free_irq(AT91_PIN_PA19, port);
+			if (port->mapbase == AT91RM9200_BASE_US3)
+				free_irq(AT91_PIN_PA24, port);
+ 			return retval;
+ 		}
+ 	}
+ 
+@@ -947,6 +1040,10 @@
+ 	 * Free the interrupt
+ 	 */
+ 	free_irq(port->irq, port);
+	if (port->mapbase == AT91RM9200_BASE_US0)
+		free_irq(AT91_PIN_PA19, port);
+	if (port->mapbase == AT91RM9200_BASE_US3)
+		free_irq(AT91_PIN_PA24, port);
+ 
+ 	/*
+ 	 * If there is a specific "close" function (to unregister
--- a/target/linux/at91/patches-2.6.25/009-fdl-uartinit.patch
+++ b/target/linux/at91/patches-2.6.25/009-fdl-uartinit.patch
@ -0,0 +1,34 @@
+--- linux-2.6.25.10.old/arch/arm/mach-at91/at91rm9200_devices.c	2008-07-04 15:04:13.000000000 +0200
+++ linux-2.6.25.10/arch/arm/mach-at91/at91rm9200_devices.c	2008-07-04 15:11:44.000000000 +0200
+@@ -981,7 +981,15 @@
+ 		 *  We need to drive the pin manually.  Default is off (RTS is active low).
+ 		 */
+ 		at91_set_gpio_output(AT91_PIN_PA21, 1);
+-	}
+		}
+	if (pins & ATMEL_UART_DTR)
+		at91_set_gpio_output(AT91_PIN_PB6, 1);  /* DTR0 */
+	if (pins & ATMEL_UART_RI)
+		at91_set_gpio_output(AT91_PIN_PB7, 1);  /* RI0 */
+	if (pins & ATMEL_UART_DCD) {
+		at91_set_gpio_input(AT91_PIN_PA19, 1);  /* DCD0 */
+		at91_set_deglitch(AT91_PIN_PA19, 1);
+		}
+ }
+ 
+ static struct resource uart1_resources[] = {
+@@ -1119,6 +1127,14 @@
+ 		at91_set_B_periph(AT91_PIN_PB1, 0);	/* CTS3 */
+ 	if (pins & ATMEL_UART_RTS)
+ 		at91_set_B_periph(AT91_PIN_PB0, 0);	/* RTS3 */
+	if (pins & ATMEL_UART_DTR)
+		at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */
+	if (pins & ATMEL_UART_RI)
+		at91_set_gpio_output(AT91_PIN_PB2, 1);  /* RI0 */
+	if (pins & ATMEL_UART_DCD) {
+		at91_set_gpio_input(AT91_PIN_PA24, 1);  /* DCD0 */
+		at91_set_deglitch(AT91_PIN_PA24, 1);
+		}
+ }
+ 
+ static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
--- a/target/linux/at91/patches-2.6.25/010-dm9161a-phyfix.patch
+++ b/target/linux/at91/patches-2.6.25/010-dm9161a-phyfix.patch
@ -0,0 +1,30 @@
+Index: linux-2.6.22.19/drivers/net/arm/at91_ether.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/net/arm/at91_ether.c
+++ linux-2.6.22.19/drivers/net/arm/at91_ether.c
+@@ -146,6 +146,7 @@ static void update_linkspeed(struct net_
+ 	struct at91_private *lp = netdev_priv(dev);
+ 	unsigned int bmsr, bmcr, lpa, mac_cfg;
+ 	unsigned int speed, duplex;
+	unsigned long timeout = jiffies + HZ;
+ 
+ 	if (!mii_link_ok(&lp->mii)) {		/* no link */
+ 		netif_carrier_off(dev);
+@@ -158,8 +159,15 @@ static void update_linkspeed(struct net_
+ 	read_phy(lp->phy_address, MII_BMSR, &bmsr);
+ 	read_phy(lp->phy_address, MII_BMCR, &bmcr);
+ 	if (bmcr & BMCR_ANENABLE) {				/* AutoNegotiation is enabled */
+-		if (!(bmsr & BMSR_ANEGCOMPLETE))
+-			return;			/* Do nothing - another interrupt generated when negotiation complete */
+		while (!(bmsr & BMSR_ANEGCOMPLETE)) {
+			if (time_after(jiffies, timeout)) {
+				printk("at91_ether: Auto-negotiate timeout\n");
+				return;
+			}
+			read_phy(lp->phy_address, MII_BMSR, &bmsr);
+			read_phy(lp->phy_address, MII_BMCR, &bmcr);
+			cpu_relax();
+		}
+ 
+ 		read_phy(lp->phy_address, MII_LPA, &lpa);
+ 		if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100;
--- a/target/linux/at91/patches-2.6.25/014-initpartition.patch
+++ b/target/linux/at91/patches-2.6.25/014-initpartition.patch
@ -0,0 +1,20 @@
+Index: linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mtd/devices/at91_dataflash.c
+++ linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
+@@ -163,12 +163,12 @@ static struct mtd_partition static_parti
+ 		.mask_flags	= MTD_WRITEABLE,	/* read-only */
+ 	},
+ 	{
+-		.name		= "kernel",
+		.name		= "knlroot",
+ 		.offset		= MTDPART_OFS_NXTBLK,
+-		.size		= 5 * 32 * 8 * 1056,	/* 5 sectors */
+		.size		= 0x320400,
+ 	},
+ 	{
+-		.name		= "filesystem",
+		.name		= "jffs2",
+ 		.offset		= MTDPART_OFS_NXTBLK,
+ 		.size		= MTDPART_SIZ_FULL,	/* rest = 26 sectors */
+ 	}