added Linksys WRT54GS v1.1 docs

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@988 3c298f89-4303-0410-b956-a3cf2f4a3e73

openwrt/docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt

@@ -0,0 +1,11 @@
+system type             : Broadcom BCM947XX
+processor               : 0
+cpu model               : BCM3302 V0.7
+BogoMIPS                : 215.44
+wait instruction        : no
+microsecond timers      : yes
+tlb_entries             : 32
+extra interrupt vector  : no
+hardware watchpoint     : no
+VCED exceptions         : not available
+VCEI exceptions         : not available

openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt

@@ -0,0 +1,83 @@
+CPU revision is: 00029007
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.30 (kaloz@richese) (gcc version 3.4.3) #1 2005. máj. 20., péntek, 16.07.34 CEST
+Determined physical RAM map:
+ memory: 02000000 @ 00000000 (usable)
+On node 0 totalpages: 8192
+zone(0): 8192 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4712 rev 1 at 216 MHz
+Using 108.000 MHz high precision timer.
+Calibrating delay loop... 215.44 BogoMIPS
+Memory: 30256k/32768k available (1512k kernel code, 2512k reserved, 104k data, 88k init, 0k highmem)
+Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
+Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Disabled
+PCI: Fixing up bus 0
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xb8000300 (irq = 3) is a 16550A
+ttyS01 at 0xb8000400 (irq = 0) is a 16550A
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
+cfi_cmdset_0001: Erase suspend on write enabled
+0: offset=0x0,size=0x20000,blocks=64
+Using buffer write method
+Flash device: 0x800000 at 0x1c000000
+Creating 4 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x007e0000 : "linux"
+0x000c0000-0x007e0000 : "rootfs"
+0x007e0000-0x00800000 : "nvram"
+Initializing Cryptographic API
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 2048 bind 4096)
+ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (jffs2 filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 88k freed
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 00000708
+jffs2.bbc: SIZE compression mode activated.
+b44.c:v0.93 (Mar, 2004)
+PCI: Setting latency timer of device 00:02.0 to 64
+eth0: Broadcom 47xx 10/100BaseT Ethernet 00:13:10:07:ee:fc
+PCI: Setting latency timer of device 00:01.0 to 64
+eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan0: add 01:00:5e:00:00:01 mcast address to master interface
+device eth1 entered promiscuous mode
+br0: port 2(eth1) entering learning state
+br0: port 1(vlan0) entering learning state
+br0: port 2(eth1) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(vlan0) entering forwarding state
+br0: topology change detected, propagating
+vlan1: add 01:00:5e:00:00:01 mcast address to master interface

openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt

@@ -0,0 +1,21 @@
+Linksys WRT54GS v1.1
+
+Online Description from Linksys:
+http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=610
+
+CPU: BCM4712 at 216 MHz
+RAM: 32 MB
+Flash: 8 MB
+1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
+1 Broadcom BCM4320 802.11 Wireless Controller 
+serial port possible
+JTAG interface
+
+List of files:
+nvram.txt: contents of NVRAM after nvram erase and adjusted cpu speed
+cpuinfo.txt: contents of /proc/cpuinfo with adjusted cpu speed (2.4.30)
+pci.txt:  contents of /proc/pci (2.4.30)
+dmesg-2_4_30.txt: dmesg from Kernel 2.4.30 (using b44 and robocfg)
+
+Notes:
+CPU runs at 200MHz default, You should adjust it to 216Mhz, as that fixes the problems during high network load.

openwrt/docs/hardware/linksys/wrt54gs_v11/nvram.txt

@@ -0,0 +1,94 @@
+wl0_net_mode=mixed
+os_ram_addr=80001000
+wl0_frameburst=off
+boardrev=0x10
+il0macaddr=00:13:10:07:ee:fe
+bootnv_ver=2
+et0macaddr=00:13:10:07:EE:FC
+boot_wait=on
+watchdog=5000
+wl0_infra=1
+wl0_country_code=AU
+et0mdcport=0
+pmon_ver=CFE 3.61.13.0
+wl0_ifname=eth1
+gpio5=robo_reset
+vlan0ports=1 2 3 4 5*
+wl0_mode=ap
+wl0_ap_isolate=0
+os_flash_addr=bfc40000
+wl0_gmode=6
+sromrev=2
+boardtype=0x0708
+lan_netmask=255.255.255.0
+wl0_dtim=1
+wl0_ssid=OpenWrt
+wl0_key1=
+wl0id=0x4320
+wl0_key2=
+wl0_key3=
+wl0_key4=
+ag0=255
+wl0_plcphdr=long
+wl0_rate=0
+wl0_closed=0
+wl0_macmode=disabled
+wl0_radioids=BCM2050
+wl0_phytype=g
+wl0gpio2=0
+wl0_lazywds=0
+wl0gpio3=0
+boardflags2=0
+wl0_afterburner=auto
+wl0_antdiv=-1
+wl0_wpa_psk=
+wl0_unit=0
+wl_country_code=AU
+pa0itssit=62
+wl0_wds=
+cctl=0
+wl0_radius_port=1812
+wl0_auth=0
+wl0_radius_ipaddr=
+pa0maxpwr=0x4e
+clkfreq=216
+lan_ipaddr=192.168.1.1
+vlan1hwname=et0
+aa0=3
+wl0_phytypes=g
+wl0_frag=2346
+wl0_wep=disabled
+sdram_config=0x0062
+wl0_country=
+vlan1ports=0 5
+scratch=a0180000
+eou_private_key=3979dac822dd40eb1739886261d8c48fc437335ed9b2d851aba651c25718c2fd3e1a4607373b1e3570d5d79adafab37767853749eee724bb7b60d4ed1dae316144c33b1e39547f25d4e9a7b13df509a902f60e76d0db8f5089020b274792b4c39895fa45c88dfe73d544de5d0fed9ac1610309756c6632d2811a6a255769b0c9
+ccode=0
+wl0_rateset=default
+eou_device_id=F7QVRQQK
+boardflags=0x0318
+sdram_refresh=0x0000
+sdram_ncdl=0xff0007
+wl0_rts=2347
+wl0_wpa_gtk_rekey=3600
+wl0_key=1
+et0phyaddr=30
+wl0_radio=1
+wl0_bcn=100
+wl0_hwaddr=00:13:10:07:EE:FE
+wl0_gmode_protection=auto
+pa0b0=0x15eb
+wl0_maclist=
+pa0b1=0xfa82
+pa0b2=0xfe66
+sdram_init=0x000b
+vlan0hwname=et0
+dl_ram_addr=a0001000
+wl0_radius_key=
+wl0_corerev=7
+wl0_channel=11
+wl0_auth_mode=open
+boot_ver=v3.4
+wl0_crypto=tkip
+boardnum=42
+eou_public_key=c36b1b0edcf0431f4ef6cfb4e647691c01887b75b0f9ac48e1357c618e8763c36cbfbae5556299e8e60a4374e8879562c65e88c82c45167d70493a5964e9db1942bc4b73b6d3571249294298a429ca8b199b8f48e2df35ceff68aec2dee787a18167ddc78876cd179f26f016ab1d7722c7d284a76e42e0ebb3fb32d984e10b2b11

openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt

@@ -0,0 +1,37 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0501: PCI device 14e4:0800 (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff].
+      Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
+      Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff].
+  Bus  0, device   1, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 1).
+      IRQ 4.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 1).
+      IRQ 5.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0c03: PCI device 14e4:4717 (rev 1).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0c03: PCI device 14e4:4716 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+  Bus  0, device   5, function  0:
+    Class 0b30: PCI device 14e4:0816 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+  Bus  0, device   6, function  0:
+    Class 0500: PCI device 14e4:080f (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].