qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-24 00:14:05 +02:00
Code

ar71xx: fix MAC addresses on the DIR-825-B1 board

Browse Source 
Patch-by: Lukas Kuna

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28295 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg 2011-09-23 19:56:39 +00:00
parent a46904b68e
commit 8d0d02042c
1 changed files with 23 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
View File

@ -1,7 +1,7 @@
/*
* D-Link DIR-825 rev. B1 board support
*
* Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o.
* Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o.
*
* based on mach-wndr3700.c
*
@ -45,8 +45,8 @@
#define DIR825B1_CAL_LOCATION_0 0x1f661000
#define DIR825B1_CAL_LOCATION_1 0x1f665000
#define DIR825B1_MAC_LOCATION_0 0x2ffa81b8
#define DIR825B1_MAC_LOCATION_1 0x2ffa8370
#define DIR825B1_MAC_LOCATION_0 0x1f66ffa0
#define DIR825B1_MAC_LOCATION_1 0x1f66ffb4
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition dir825b1_partitions[] = {
@ -150,20 +150,35 @@ static struct platform_device dir825b1_rtl8366s_device = {
}
};
static void dir825b1_read_ascii_mac(u8 *dest, unsigned int src_addr)
{
int ret;
u8 *src = (u8 *)KSEG1ADDR(src_addr);
ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
&dest[0], &dest[1], &dest[2],
&dest[3], &dest[4], &dest[5]);
if (ret != ETH_ALEN) memset(dest, 0, ETH_ALEN);
}
static void __init dir825b1_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_1);
u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
dir825b1_read_ascii_mac(mac1, DIR825B1_MAC_LOCATION_0);
dir825b1_read_ascii_mac(mac2, DIR825B1_MAC_LOCATION_1);
ar71xx_add_device_mdio(0x0);
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1);
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 2);
ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 2);
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac1, 3);
ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0x10;
@ -188,10 +203,8 @@ static void __init dir825b1_setup(void)
ap94_pci_setup_wmac_led_pin(0, 5);
ap94_pci_setup_wmac_led_pin(1, 5);
ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0),
(u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_0),
(u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1),
(u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_1));
ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), mac1,
(u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), mac2);
}
MIPS_MACHINE(AR71XX_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",