IXP4xx patches for NSLU2 and NAS100D

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5830 3c298f89-4303-0410-b956-a3cf2f4a3e73
2024-12-25 03:01:09 +02:00 · 2006-12-18 01:57:04 +00:00 · 2006-12-18 01:57:04 +00:00 · 928d62f33e
commit 928d62f33e
parent 5a0b9e8c8d
12 changed files with 930 additions and 0 deletions
--- a/target/linux/ixp4xx-2.6/patches/102-nslu2_led_swap.patch
+++ b/target/linux/ixp4xx-2.6/patches/102-nslu2_led_swap.patch
@ -0,0 +1,36 @@
+Submitted as http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=3984/1
+
+This patch fixes an error in the numbering of the disk LEDs on the
+Linksys NSLU2.  The error crept in because the physical location
+of the LEDs has the Disk 2 LED *above* the Disk 1 LED.
+
+Thanks to Gordon Farquharson for reporting this.
+
+Signed-off-by: Rod Whitby <rod@whitby.id.au>
+
+PATCH FOLLOWS
+KernelVersion: 2.6.19
+
+Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/nslu2.h
+===================================================================
+--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/nslu2.h
+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/nslu2.h
+@@ -76,6 +76,7 @@
+ 
+ #define NSLU2_GPIO_BUZZ		4
+ #define NSLU2_BZ_BM		(1L << NSLU2_GPIO_BUZZ)
+
+ /* LEDs */
+ 
+ #define NSLU2_LED_RED		NSLU2_GPIO0
+@@ -84,8 +85,8 @@
+ #define NSLU2_LED_RED_BM	(1L << NSLU2_LED_RED)
+ #define NSLU2_LED_GRN_BM	(1L << NSLU2_LED_GRN)
+ 
+-#define NSLU2_LED_DISK1		NSLU2_GPIO2
+-#define NSLU2_LED_DISK2		NSLU2_GPIO3
+#define NSLU2_LED_DISK1		NSLU2_GPIO3
+#define NSLU2_LED_DISK2		NSLU2_GPIO2
+ 
+ #define NSLU2_LED_DISK1_BM	(1L << NSLU2_GPIO2)
+ #define NSLU2_LED_DISK2_BM	(1L << NSLU2_GPIO3)
--- a/target/linux/ixp4xx-2.6/patches/133-ixp4xx-net-driver-improve-mac-handling.patch
+++ b/target/linux/ixp4xx-2.6/patches/133-ixp4xx-net-driver-improve-mac-handling.patch
@ -0,0 +1,60 @@
+Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
+===================================================================
+--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/platform.h
+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
+@@ -100,6 +100,7 @@ struct mac_plat_info {
+ 	int phy_id;	/* ID of the connected PHY (PCB/platform dependent) */
+ 	int rxq_id;	/* Queue ID of the RX-free q*/
+ 	int txq_id;	/* Where to push the outgoing packets */
+	unsigned char hwaddr[6]; /* Desired hardware address */
+ };
+ 
+ 
+Index: linux-2.6.19/drivers/net/ixp4xx/mac_driver.c
+===================================================================
+--- linux-2.6.19.orig/drivers/net/ixp4xx/mac_driver.c
+++ linux-2.6.19/drivers/net/ixp4xx/mac_driver.c
+@@ -189,6 +189,24 @@ static int ixmac_open (struct net_device
+ 	}
+ 	mac->rxq_pkt += RX_QUEUE_PREFILL;
+ 
+	/* printk(KERN_INFO "...Platform MAC=0x%02x%02x%02x%02x%02x%02x\n",
+		mac->plat->hwaddr[0],
+		mac->plat->hwaddr[1],
+		mac->plat->hwaddr[2],
+		mac->plat->hwaddr[3],
+		mac->plat->hwaddr[4],
+		mac->plat->hwaddr[5]
+	); */
+	/* Only use platform or random if there's currently no device hw addr */
+	if (is_zero_ether_addr(dev->dev_addr)) {
+		if (is_zero_ether_addr(mac->plat->hwaddr)) {
+			random_ether_addr(dev->dev_addr);
+			dev->dev_addr[5] = mac->plat->phy_id;
+		}
+		else
+			memcpy(dev->dev_addr, mac->plat->hwaddr, 6);
+	}
+
+ 	mac_init(mac);
+ 	npe_mh_set_rxqid(npe, mac->plat, RX_DONE_QID);
+ 	mac_set_uniaddr(dev);
+@@ -434,9 +452,15 @@ static int mac_probe(struct platform_dev
+ 	 * following commands:
+ 	 * "ip link set address 02:03:04:04:04:01 dev eth0"
+ 	 * "ifconfig eth0 hw ether 02:03:04:04:04:07"
+-	 */
+-	random_ether_addr(dev->dev_addr);
+-	dev->dev_addr[5] = plat->phy_id;
+	*/
+/*     Note: moved to ixmac_open to allow notifiers to run for compiled in modules
+	if (is_zero_ether_addr(plat->hwaddr)) {
+		random_ether_addr(dev->dev_addr);
+		dev->dev_addr[5] = plat->phy_id;
+	}
+	else
+		memcpy(dev->dev_addr, plat->hwaddr, 6);
+*/
+ 
+ 	printk(KERN_INFO IXMAC_NAME " driver " IXMAC_VERSION
+ 			": %s on %s with PHY[%d] initialized\n",
--- a/target/linux/ixp4xx-2.6/patches/139-ixp4xx-net-driver-mtd-load-fw.patch
+++ b/target/linux/ixp4xx-2.6/patches/139-ixp4xx-net-driver-mtd-load-fw.patch
@ -0,0 +1,414 @@
+Index: linux-2.6.19/drivers/net/ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.19.orig/drivers/net/ixp4xx/Kconfig
+++ linux-2.6.19/drivers/net/ixp4xx/Kconfig
+@@ -11,6 +11,7 @@ config IXP4XX_NPE
+ 	tristate "IXP4xx NPE support"
+ 	depends on ARCH_IXP4XX
+ 	depends on NET_ETHERNET
+	select CRC16
+ 	help
+ 	  The IXP4XX NPE driver supports the 3 CPU co-processors called
+ 	  "Network Processing Engines" (NPE). It adds support fo downloading
+@@ -18,7 +19,7 @@ config IXP4XX_NPE
+ 	  More about this at: Documentation/networking/ixp4xx/README.
+ 	  You can either use this OR the Intel Access Library (IAL)
+ 
+-config IXP4XX_FW_LOAD
+config IXP4XX_NPE_FW_LOAD
+ 	bool "Use Firmware hotplug for Microcode download"
+ 	depends on IXP4XX_NPE
+ 	select HOTPLUG
+@@ -28,6 +29,13 @@ config IXP4XX_FW_LOAD
+ 	  /usr/lib/hotplug/firmware/NPE-[ABC]
+ 	  see Documentation/firmware_class/hotplug-script
+ 
+config IXP4XX_NPE_FW_MTD
+	bool "Load firmware from an mtd partition"
+	depends on IXP4XX_NPE && MTD_IXP4XX
+	help
+	  With this option, the driver will search for
+	  the firmware into an MTD partition.
+
+ config IXP4XX_MAC
+ 	tristate "IXP4xx MAC support"
+ 	depends on IXP4XX_NPE
+Index: linux-2.6.19/drivers/net/ixp4xx/Makefile
+===================================================================
+--- linux-2.6.19.orig/drivers/net/ixp4xx/Makefile
+++ linux-2.6.19/drivers/net/ixp4xx/Makefile
+@@ -1,6 +1,7 @@
+ obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
+ obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
+ obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o
+obj-$(CONFIG_IXP4XX_NPE_FW_MTD) += npe_ucode.o
+ 
+ ixp4xx_npe-objs := ucode_dl.o npe_mh.o
+ ixp4xx_mac-objs := mac_driver.o qmgr_eth.o phy.o
+Index: linux-2.6.19/drivers/net/ixp4xx/npe_ucode.c
+===================================================================
+--- /dev/null
+++ linux-2.6.19/drivers/net/ixp4xx/npe_ucode.c
+@@ -0,0 +1,185 @@
+/*
+ * Provide an NPE platform device for microcode handling
+ *
+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
+ *
+ * This file is released under the GPLv2
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/firmware.h>
+#include <linux/mtd/mtd.h>
+
+#include <linux/ixp_npe.h>
+
+#define DL_MAGIC 0xfeedf00d
+#define DL_MAGIC_SWAP 0x0df0edfe
+
+#define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \
+		sizeof(struct dl_image))
+
+#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f)
+#define IMG_REV_MINOR(id) ((id) & 0x0f)
+#define IMG_FUNC(id) (((id) >> 16) & 0xff)
+#define IMG_NPE(id) (((id) >> 24) & 0x0f)
+#define IMG_IXP(id) (((id) >> 28) & 0x0f)
+
+static struct platform_driver ixp4xx_npe_ucode_driver;
+static unsigned char *partition_name = NULL;
+
+static void print_image_info(u32 id, u32 offset, u32 size)
+{
+	unsigned char idx;
+	const char *names[] = { "IXP425", "IXP465", "unknown" };
+
+	idx = IMG_IXP(id) < 2 ? IMG_IXP(id) : 2;
+
+	printk(KERN_INFO "npe: found at 0x%x, %s/NPE-%c func: %02x, rev: %x.%x, "
+		"size: %5d, id: %08x\n", offset, names[idx], IMG_NPE(id) + 'A',
+		IMG_FUNC(id), IMG_REV_MAJOR(id), IMG_REV_MINOR(id), size, id);
+}
+
+void npe_swap_image(struct dl_image *image)
+{
+	unsigned int i;
+
+	image->magic = swab32(image->magic);
+	image->id = swab32(image->id);
+	image->size = swab32(image->size);
+
+	for (i = 0; i < image->size; i++)
+		image->u.data[i] = swab32(image->u.data[i]);
+}
+
+static void npe_find_microcode(struct mtd_info *mtd)
+{
+	u32 buf;
+	u32 magic = htonl(DL_MAGIC);
+	u32 id, size;
+	size_t retlen;
+	int err;
+	unsigned int offset = 0;
+
+	printk("npe: searching for firmware...\n");
+
+	while (offset < mtd->size) {
+
+		err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &buf);
+		offset += retlen;
+
+		if (buf != magic)
+			continue;
+
+		err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &id);
+		offset += retlen;
+
+		if (id == magic)
+			break;
+
+		id = ntohl(id);
+
+		err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &size);
+		offset += retlen;
+
+		size = (ntohl(size) * 4) + 12;
+
+		print_image_info(id, offset - 12, size);
+
+		if (size < 24000 && ( IMG_FUNC(id) == 0x01 || IMG_FUNC(id) == 0x00) ) { // XXX fix size/detection
+
+			struct dl_image *image = kmalloc(size, GFP_KERNEL);
+
+			/* we are going to load it, rewind offset */
+			offset -= 12;
+
+			if (image) {
+				err = mtd->read(mtd, offset, size, &retlen, (u_char *) image);
+
+				if (err == 0 && retlen == size) {
+					if (image->magic == DL_MAGIC_SWAP)
+						npe_swap_image(image);
+
+					store_npe_image(image, NULL);
+				} else {
+					printk(KERN_ERR "unable to read firmware\n");
+				}
+
+				kfree(image);
+			}
+
+			offset += size;
+		}
+	}
+}
+
+static void npe_flash_add(struct mtd_info *mtd)
+{
+	if (partition_name == NULL)
+		return;
+
+	if (strcmp(mtd->name, partition_name) == 0) {
+		npe_find_microcode(mtd);
+	}
+}
+
+static void npe_flash_remove(struct mtd_info *mtd) {
+}
+
+static struct mtd_notifier npe_flash_notifier = {
+	.add = npe_flash_add,
+	.remove = npe_flash_remove,
+};
+
+static int npe_ucode_probe(struct platform_device *pdev)
+{
+	struct npe_ucode_platform_data *data = pdev->dev.platform_data;
+
+	if (partition_name)
+		return -EEXIST;
+
+	if (data && data->mtd_partition) {
+		partition_name = data->mtd_partition;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int npe_ucode_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver ixp4xx_npe_ucode_driver = {
+	.driver = {
+		.name	= "ixp4xx_npe_ucode",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= npe_ucode_probe,
+	.remove	= npe_ucode_remove,
+};
+
+static int __init npe_ucode_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&ixp4xx_npe_ucode_driver);
+	register_mtd_user(&npe_flash_notifier);
+
+	return ret;
+}
+
+static void __exit npe_ucode_exit(void)
+{
+	unregister_mtd_user(&npe_flash_notifier);
+	platform_driver_unregister(&ixp4xx_npe_ucode_driver);
+}
+
+module_init(npe_ucode_init);
+module_exit(npe_ucode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+Index: linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c
+===================================================================
+--- linux-2.6.19.orig/drivers/net/ixp4xx/ucode_dl.c
+++ linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c
+@@ -16,6 +16,7 @@
+ #include <linux/firmware.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/byteorder/swab.h>
+#include <linux/crc16.h>
+ #include <asm/uaccess.h>
+ #include <asm/io.h>
+ 
+@@ -30,6 +31,12 @@
+ #define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \
+ 		sizeof(struct dl_image))
+ 
+#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f)
+#define IMG_REV_MINOR(id) ((id) & 0x0f)
+#define IMG_FUNC(id) (((id) >> 16) & 0xff)
+#define IMG_NPE(id) (((id) >> 24) & 0x0f)
+#define IMG_IXP(id) (((id) >> 28) & 0x0f)
+
+ #define BT_INSTR 0
+ #define BT_DATA 1
+ 
+@@ -38,21 +45,6 @@ enum blk_type {
+ 	data,
+ };
+ 
+-struct dl_block {
+-	u32 type;
+-	u32 offset;
+-};
+-
+-struct dl_image {
+-	u32 magic;
+-	u32 id;
+-	u32 size;
+-	union {
+-		u32 data[0];
+-		struct dl_block block[0];
+-	} u;
+-};
+-
+ struct dl_codeblock {
+ 	u32 npe_addr;
+ 	u32 size;
+@@ -134,23 +126,41 @@ struct device *get_npe_by_id(int id)
+ 			&id, match_by_npeid);
+ }
+ 
+-static int store_npe_image(struct dl_image *image, struct device *dev)
+int store_npe_image(struct dl_image *image, struct device *dev)
+ {
+ 	struct dl_block *blk;
+ 	struct dl_codeblock *cb;
+ 	struct npe_info *npe;
+-	int ret=0;
+	int ret = 0;
+	u16 crc;
+ 
+ 	if (!dev) {
+-		dev = get_npe_by_id( (image->id >> 24) & 0xf);
+-		put_device(dev);
+		dev = get_npe_by_id(IMG_NPE(image->id));
+		if (dev)
+			put_device(dev);
+			// XXX shouldn't this put_device be outside if(!dev) ?
+		else
+			printk(KERN_ERR "npe: cannot find npe for image %x\n", IMG_NPE(image->id));
+ 	}
+
+ 	if (!dev)
+ 		return -ENODEV;
+ 
+	if (image->size > 24000) { // XXX fix max size
+		printk(KERN_ERR "npe: firmware too large\n");
+		return -EFBIG;
+	}
+
+	if (IMG_REV_MAJOR(image->id) != 2) {
+		printk(KERN_ERR "npe: only revision 2 is supported at this time\n");
+		return -EINVAL;
+	}
+
+	crc = crc16(0, (u8 *) image, IMG_SIZE(image));
+
+ 	npe = dev_get_drvdata(dev);
+ 
+-	if ( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
+	if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
+ 		printk(KERN_INFO "Cowardly refusing to reload an Image "
+ 				"into the running %s\n", npe->plat->name);
+ 		return 0; /* indicate success anyway... */
+@@ -173,9 +183,9 @@ static int store_npe_image(struct dl_ima
+ 	*(u32*)npe->img_info = cpu_to_be32(image->id);
+ 	npe_start(npe);
+ 
+-	printk(KERN_INFO "Image loaded to %s Func:%x, Rel: %x:%x, Status: %x\n",
+	printk(KERN_INFO "npe: firmware loaded to %s, func: %02x, rev: %x.%x, status: %x, crc: %x\n",
+ 			npe->plat->name, npe->img_info[1], npe->img_info[2],
+-			npe->img_info[3], npe_status(npe));
+			npe->img_info[3], npe_status(npe), crc);
+ 	return 0;
+ }
+ 
+@@ -265,8 +275,7 @@ static ssize_t ucode_write(struct file *
+ 
+ static void npe_firmware_probe(struct device *dev)
+ {
+-#if (defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)) \
+-	&& defined(MODULE)
+#ifdef CONFIG_IXP4XX_NPE_FW_LOADER
+ 	const struct firmware *fw_entry;
+ 	struct npe_info *npe = dev_get_drvdata(dev);
+ 	struct dl_image *image;
+@@ -388,7 +397,7 @@ static int npe_probe(struct platform_dev
+ 
+ 	npe->plat = plat;
+ 	disable_npe_irq(npe);
+-	if (! (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN))
+	if (!(npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN))
+ 		npe_firmware_probe(&pdev->dev);
+ 
+ 	return 0;
+@@ -464,3 +473,4 @@ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
+ 
+ EXPORT_SYMBOL(get_npe_by_id);
+EXPORT_SYMBOL(store_npe_image);
+Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
+===================================================================
+--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/platform.h
+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
+@@ -86,6 +86,20 @@ struct ixp4xx_i2c_pins {
+ 	unsigned long scl_pin;
+ };
+ 
+struct dl_block {
+	u32 type;
+        u32 offset;
+};
+
+struct dl_image {
+	u32 magic;
+	u32 id;
+	u32 size;
+	union {
+		u32 data[0];
+		struct dl_block block[0];
+	} u;
+};
+ struct npe_plat_data {
+ 	const char *name;
+ 	int data_size;
+@@ -103,6 +117,9 @@ struct mac_plat_info {
+ 	unsigned char hwaddr[6]; /* Desired hardware address */
+ };
+ 
+struct npe_ucode_platform_data {
+	unsigned char *mtd_partition;
+};
+ 
+ struct sys_timer;
+ 
+Index: linux-2.6.19/include/linux/ixp_npe.h
+===================================================================
+--- linux-2.6.19.orig/include/linux/ixp_npe.h
+++ linux-2.6.19/include/linux/ixp_npe.h
+@@ -71,6 +71,7 @@ static inline u32 npe_read_ecs_reg(struc
+ }
+ 
+ extern struct device *get_npe_by_id(int id);
+extern int store_npe_image(struct dl_image *image, struct device *dev);
+ 
+ /* NPE Messages */
+ extern int
--- a/target/linux/ixp4xx-2.6/patches/141-nslu2_setup_mac.patch
+++ b/target/linux/ixp4xx-2.6/patches/141-nslu2_setup_mac.patch
@ -0,0 +1,41 @@
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+@@ -137,6 +137,28 @@ static struct platform_device nslu2_uart
+ 	.resource		= nslu2_uart_resources,
+ };
+ 
+static struct resource res_mac0 = {
+	.start		= IXP4XX_EthB_BASE_PHYS,
+	.end		= IXP4XX_EthB_BASE_PHYS + 0x1ff,
+	.flags          = IORESOURCE_MEM,
+};
+
+static struct mac_plat_info plat_mac0 = {
+	.npe_id		= 1,
+	.phy_id		= 1,
+	.eth_id		= 0,
+	.rxq_id		= 27,
+	.txq_id		= 24,
+};
+
+static struct platform_device mac0 = {
+	.name           = "ixp4xx_mac",
+	.id             = 0,
+	.dev.platform_data = &plat_mac0,
+	.num_resources  = 1,
+	.resource       = &res_mac0,
+};
+
+ static struct platform_device *nslu2_devices[] __initdata = {
+ 	&nslu2_i2c_controller,
+ 	&nslu2_flash,
+@@ -144,6 +166,7 @@ static struct platform_device *nslu2_dev
+ #ifdef CONFIG_LEDS_IXP4XX
+ 	&nslu2_leds,
+ #endif
+	&mac0
+ };
+ 
+ static void nslu2_power_off(void)
--- a/target/linux/ixp4xx-2.6/patches/142-nas100d_setup_mac.patch
+++ b/target/linux/ixp4xx-2.6/patches/142-nas100d_setup_mac.patch
@ -0,0 +1,40 @@
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+@@ -123,12 +123,35 @@ static struct platform_device nas100d_ua
+ 	.resource		= nas100d_uart_resources,
+ };
+ 
+static struct resource res_mac0 = {
+       .start          = IXP4XX_EthB_BASE_PHYS,
+       .end            = IXP4XX_EthB_BASE_PHYS + 0x1ff,
+       .flags          = IORESOURCE_MEM,
+};
+
+static struct mac_plat_info plat_mac0 = {
+       .npe_id         = 1,
+       .phy_id         = 0,
+       .eth_id         = 0,
+       .rxq_id         = 27,
+       .txq_id         = 24,
+};
+
+static struct platform_device mac0 = {
+       .name           = "ixp4xx_mac",
+       .id             = 0,
+       .dev.platform_data = &plat_mac0,
+       .num_resources  = 1,
+       .resource       = &res_mac0,
+};
+
+ static struct platform_device *nas100d_devices[] __initdata = {
+ 	&nas100d_i2c_controller,
+ 	&nas100d_flash,
+ #ifdef CONFIG_LEDS_IXP4XX
+ 	&nas100d_leds,
+ #endif
+	&mac0
+ };
+ 
+ static void nas100d_power_off(void)
--- a/target/linux/ixp4xx-2.6/patches/143-nslu2_mtd_microcode.patch
+++ b/target/linux/ixp4xx-2.6/patches/143-nslu2_mtd_microcode.patch
@ -0,0 +1,35 @@
+---
+ arch/arm/mach-ixp4xx/nslu2-setup.c |   13 ++++++++++++-
+ 1 file changed, 12 insertions(+), 1 deletion(-)
+
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+@@ -159,6 +159,16 @@ static struct platform_device mac0 = {
+ 	.resource       = &res_mac0,
+ };
+ 
+struct npe_ucode_platform_data nslu2_npe_ucode_data = {
+	.mtd_partition	= "FIS directory",
+};
+
+static struct platform_device nslu2_npe_ucode = {
+	.name			= "ixp4xx_npe_ucode",
+	.id			= 0,
+	.dev.platform_data	= &nslu2_npe_ucode_data,
+};
+
+ static struct platform_device *nslu2_devices[] __initdata = {
+ 	&nslu2_i2c_controller,
+ 	&nslu2_flash,
+@@ -166,7 +176,8 @@ static struct platform_device *nslu2_dev
+ #ifdef CONFIG_LEDS_IXP4XX
+ 	&nslu2_leds,
+ #endif
+-	&mac0
+	&mac0,
+	&nslu2_npe_ucode,
+ };
+ 
+ static void nslu2_power_off(void)
--- a/target/linux/ixp4xx-2.6/patches/144-nas100d_mtd_microcode.patch
+++ b/target/linux/ixp4xx-2.6/patches/144-nas100d_mtd_microcode.patch
@ -0,0 +1,34 @@
+---
+ arch/arm/mach-ixp4xx/nas100d-setup.c |   13 ++++++++++++-
+ 1 file changed, 12 insertions(+), 1 deletion(-)
+
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+@@ -145,13 +145,24 @@ static struct platform_device mac0 = {
+        .resource       = &res_mac0,
+ };
+ 
+struct npe_ucode_platform_data nas100d_npe_ucode_data = {
+	.mtd_partition	= "sysconfig",
+};
+
+static struct platform_device nas100d_npe_ucode = {
+	.name			= "ixp4xx_npe_ucode",
+	.id			= 0,
+	.dev.platform_data	= &nas100d_npe_ucode_data,
+};
+
+ static struct platform_device *nas100d_devices[] __initdata = {
+ 	&nas100d_i2c_controller,
+ 	&nas100d_flash,
+ #ifdef CONFIG_LEDS_IXP4XX
+ 	&nas100d_leds,
+ #endif
+-	&mac0
+	&mac0,
+	&nas100d_npe_ucode,
+ };
+ 
+ static void nas100d_power_off(void)
--- a/target/linux/ixp4xx-2.6/patches/152-nas100d-mtd_load_mac.patch
+++ b/target/linux/ixp4xx-2.6/patches/152-nas100d-mtd_load_mac.patch
@ -0,0 +1,56 @@
+---
+ arch/arm/mach-ixp4xx/nas100d-setup.c |   27 +++++++++++++++++++++++++++
+ 1 file changed, 27 insertions(+)
+
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+@@ -16,6 +16,7 @@
+ #include <linux/serial.h>
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
+#include <linux/mtd/mtd.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -165,6 +166,30 @@ static struct platform_device *nas100d_d
+ 	&nas100d_npe_ucode,
+ };
+ 
+static void nas100d_flash_add(struct mtd_info *mtd)
+{
+	if (strcmp(mtd->name, "RedBoot config") == 0) {
+		size_t retlen;
+		u_char mac[6];
+
+		if (mtd->read(mtd, 0x0FD8, 6, &retlen, mac) == 0 && retlen == 6) {
+			printk(KERN_INFO "nas100d mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+				mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+			memcpy(plat_mac0.hwaddr, mac, 6);
+		} else {
+			printk(KERN_ERR "nas100d mac: read failed\n");
+		}
+	}
+}
+
+static void nas100d_flash_remove(struct mtd_info *mtd) {
+}
+
+static struct mtd_notifier nas100d_flash_notifier = {
+	.add = nas100d_flash_add,
+	.remove = nas100d_flash_remove,
+};
+
+ static void nas100d_power_off(void)
+ {
+ 	/* This causes the box to drop the power and go dead. */
+@@ -196,6 +221,8 @@ static void __init nas100d_init(void)
+ 	(void)platform_device_register(&nas100d_uart);
+ 
+ 	platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
+
+	register_mtd_user(&nas100d_flash_notifier);
+ }
+ 
+ MACHINE_START(NAS100D, "Iomega NAS 100d")
--- a/target/linux/ixp4xx-2.6/patches/153-nslu2_mtd_load_mac.patch
+++ b/target/linux/ixp4xx-2.6/patches/153-nslu2_mtd_load_mac.patch
@ -0,0 +1,56 @@
+---
+ arch/arm/mach-ixp4xx/nslu2-setup.c |   27 +++++++++++++++++++++++++++
+ 1 file changed, 27 insertions(+)
+
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+@@ -18,6 +18,7 @@
+ #include <linux/serial.h>
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
+#include <linux/mtd/mtd.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -180,6 +181,30 @@ static struct platform_device *nslu2_dev
+ 	&nslu2_npe_ucode,
+ };
+ 
+static void nslu2_flash_add(struct mtd_info *mtd)
+{
+	if (strcmp(mtd->name, "RedBoot") == 0) {
+		size_t retlen;
+		u_char mac[6];
+
+		if (mtd->read(mtd, 0x3FFB0, 6, &retlen, mac) == 0 && retlen == 6) {
+			printk(KERN_INFO "nslu2 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+				mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+			memcpy(plat_mac0.hwaddr, mac, 6);
+		} else {
+			printk(KERN_ERR "nslu2 mac: read failed\n");
+		}
+	}
+}
+
+static void nslu2_flash_remove(struct mtd_info *mtd) {
+}
+
+static struct mtd_notifier nslu2_flash_notifier = {
+	.add = nslu2_flash_add,
+	.remove = nslu2_flash_remove,
+};
+
+ static void nslu2_power_off(void)
+ {
+ 	/* This causes the box to drop the power and go dead. */
+@@ -210,6 +235,8 @@ static void __init nslu2_init(void)
+ 	(void)platform_device_register(&nslu2_uart);
+ 
+ 	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
+
+	register_mtd_user(&nslu2_flash_notifier);
+ }
+ 
+ MACHINE_START(NSLU2, "Linksys NSLU2")
--- a/target/linux/ixp4xx-2.6/patches/160-nas100d_artop_temp_fix.patch
+++ b/target/linux/ixp4xx-2.6/patches/160-nas100d_artop_temp_fix.patch
@ -0,0 +1,49 @@
+From: Alan Cox <alan@redhat.com>
+To: Alessandro Zummo <alessandro.zummo@towertech.it>
+Cc: Jeff Garzik <jgarzik@redhat.com>, Alan Cox <alan@redhat.com>
+Subject: Re: drivers/ata/pata_artop.c
+Date: Sun, 15 Oct 2006 14:25:16 -0400
+User-Agent: Mutt/1.4.1i
+
+On Sun, Oct 15, 2006 at 07:18:31PM +0200, Alessandro Zummo wrote:
+>  In the discovery phase there's a lot of time spent in the detection
+>  of the second port.  
+
+The error recovery is a bit determined right now - Tejun's been doing some
+work on SRST behaviour and also for the worst cases polled detect so it
+should come out ok
+
+>  What's the correct way to inform the driver
+>  to avoid checking the second port?  
+
+Set the number of ports to 1 in your own tree for now. The real fix is
+not to go poking at pata ports if the ret is 0xFF
+
+---
+ drivers/ata/pata_artop.c |    6 ++++++
+ 1 file changed, 6 insertions(+)
+
+Index: linux-2.6.19/drivers/ata/pata_artop.c
+===================================================================
+--- linux-2.6.19.orig/drivers/ata/pata_artop.c
+++ linux-2.6.19/drivers/ata/pata_artop.c
+@@ -26,6 +26,7 @@
+ #include <scsi/scsi_host.h>
+ #include <linux/libata.h>
+ #include <linux/ata.h>
+#include <asm/mach-types.h>
+ 
+ #define DRV_NAME	"pata_artop"
+ #define DRV_VERSION	"0.4.2"
+@@ -469,6 +470,11 @@ static int artop_init_one (struct pci_de
+ 		pci_read_config_byte(pdev, 0x4a, &reg);
+ 		pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
+ 
+		/* NAS100D workaround */
+#ifdef CONFIG_MACH_NAS100D
+		if (machine_is_nas100d())
+			ports = 1;
+#endif
+ 	}
+ 
+ 	BUG_ON(info == NULL);
--- a/target/linux/ixp4xx-2.6/patches/185-nslu2_rtc_fixup.patch
+++ b/target/linux/ixp4xx-2.6/patches/185-nslu2_rtc_fixup.patch
@ -0,0 +1,54 @@
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+@@ -20,6 +20,7 @@
+ #include <linux/leds.h>
+ #include <linux/mtd/mtd.h>
+ 
+#include <asm/setup.h>
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+@@ -239,11 +240,41 @@ static void __init nslu2_init(void)
+ 	register_mtd_user(&nslu2_flash_notifier);
+ }
+ 
+static char nslu2_rtc_probe[] __initdata = "rtc-x1205.probe=0,0x6f ";
+
+static void __init nslu2_fixup(struct machine_desc *desc,
+		struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+	struct tag *t = tags;
+	char *p = *cmdline;
+
+	/* Find the end of the tags table, taking note of any cmdline tag. */
+	for (; t->hdr.size; t = tag_next(t)) {
+		if (t->hdr.tag == ATAG_CMDLINE) {
+			p = t->u.cmdline.cmdline;
+		}
+	}
+
+	/* Overwrite the end of the table with a new cmdline tag. */
+	t->hdr.tag = ATAG_CMDLINE;
+	t->hdr.size = (sizeof (struct tag_header) +
+		       strlen(nslu2_rtc_probe) + strlen(p) + 1 + 4) >> 2;
+	strlcpy(t->u.cmdline.cmdline, nslu2_rtc_probe, COMMAND_LINE_SIZE);
+	strlcpy(t->u.cmdline.cmdline + strlen(nslu2_rtc_probe), p,
+		COMMAND_LINE_SIZE - strlen(nslu2_rtc_probe));
+
+	/* Terminate the table. */
+	t = tag_next(t);
+	t->hdr.tag = ATAG_NONE;
+	t->hdr.size = 0;
+}
+
+ MACHINE_START(NSLU2, "Linksys NSLU2")
+ 	/* Maintainer: www.nslu2-linux.org */
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ 	.boot_params	= 0x00000100,
+	.fixup          = nslu2_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer          = &ixp4xx_timer,
--- a/target/linux/ixp4xx-2.6/patches/186-nas100d_rtc_fixup.patch
+++ b/target/linux/ixp4xx-2.6/patches/186-nas100d_rtc_fixup.patch
@ -0,0 +1,55 @@
+Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+===================================================================
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+@@ -18,6 +18,7 @@
+ #include <linux/leds.h>
+ #include <linux/mtd/mtd.h>
+ 
+#include <asm/setup.h>
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+@@ -225,11 +226,42 @@ static void __init nas100d_init(void)
+ 	register_mtd_user(&nas100d_flash_notifier);
+ }
+ 
+static char nas100d_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 ";
+
+static void __init nas100d_fixup(struct machine_desc *desc,
+		struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+	struct tag *t = tags;
+	char *p = *cmdline;
+
+	/* Find the end of the tags table, taking note of any cmdline tag. */
+	for (; t->hdr.size; t = tag_next(t)) {
+		if (t->hdr.tag == ATAG_CMDLINE) {
+			p = t->u.cmdline.cmdline;
+		}
+	}
+
+	/* Overwrite the end of the table with a new cmdline tag. */
+	t->hdr.tag = ATAG_CMDLINE;
+	t->hdr.size =
+		(sizeof (struct tag_header) +
+		 strlen(nas100d_rtc_probe) + strlen(p) + 1 + 4) >> 2;
+	strlcpy(t->u.cmdline.cmdline, nas100d_rtc_probe, COMMAND_LINE_SIZE);
+	strlcpy(t->u.cmdline.cmdline + strlen(nas100d_rtc_probe), p,
+		COMMAND_LINE_SIZE - strlen(nas100d_rtc_probe));
+
+	/* Terminate the table. */
+	t = tag_next(t);
+	t->hdr.tag = ATAG_NONE;
+	t->hdr.size = 0;
+}
+
+ MACHINE_START(NAS100D, "Iomega NAS 100d")
+ 	/* Maintainer: www.nslu2-linux.org */
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ 	.boot_params	= 0x00000100,
+	.fixup          = nas100d_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer          = &ixp4xx_timer,