mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-24 15:39:32 +02:00
ramips: switch to 2.6.37
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26328 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
parent
3caf3c48cf
commit
a406ef4fe7
@ -13,7 +13,7 @@ SUBTARGETS:=rt288x rt305x
|
||||
CFLAGS:=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves
|
||||
FEATURES:=squashfs
|
||||
|
||||
LINUX_VERSION:=2.6.36.4
|
||||
LINUX_VERSION:=2.6.37.4
|
||||
|
||||
include $(INCLUDE_DIR)/target.mk
|
||||
DEFAULT_PACKAGES+=kmod-leds-gpio wpad-mini
|
||||
|
@ -0,0 +1,29 @@
|
||||
--- a/arch/mips/kernel/traps.c
|
||||
+++ b/arch/mips/kernel/traps.c
|
||||
@@ -54,6 +54,7 @@
|
||||
#include <asm/types.h>
|
||||
#include <asm/stacktrace.h>
|
||||
#include <asm/uasm.h>
|
||||
+#include <asm/time.h>
|
||||
|
||||
extern void check_wait(void);
|
||||
extern asmlinkage void r4k_wait(void);
|
||||
@@ -1578,6 +1579,8 @@ void __cpuinit per_cpu_trap_init(void)
|
||||
if (cpu_has_mips_r2) {
|
||||
cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
|
||||
cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
|
||||
+ if (get_c0_compare_irq)
|
||||
+ cp0_compare_irq = get_c0_compare_irq();
|
||||
cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
|
||||
if (cp0_perfcount_irq == cp0_compare_irq)
|
||||
cp0_perfcount_irq = -1;
|
||||
--- a/arch/mips/include/asm/time.h
|
||||
+++ b/arch/mips/include/asm/time.h
|
||||
@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
|
||||
*/
|
||||
#ifdef CONFIG_CEVT_R4K_LIB
|
||||
extern unsigned int __weak get_c0_compare_int(void);
|
||||
+extern unsigned int __weak get_c0_compare_irq(void);
|
||||
extern int r4k_clockevent_init(void);
|
||||
#endif
|
||||
|
@ -0,0 +1,20 @@
|
||||
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
@@ -1640,7 +1640,7 @@ static int __xipram do_erase_chip(struct
|
||||
chip->erase_suspended = 0;
|
||||
}
|
||||
|
||||
- if (chip_ready(map, adr))
|
||||
+ if (chip_good(map, adr, map_word_ff(map)))
|
||||
break;
|
||||
|
||||
if (time_after(jiffies, timeo)) {
|
||||
@@ -1728,7 +1728,7 @@ static int __xipram do_erase_oneblock(st
|
||||
chip->erase_suspended = 0;
|
||||
}
|
||||
|
||||
- if (chip_ready(map, adr)) {
|
||||
+ if (chip_good(map, adr, map_word_ff(map))) {
|
||||
xip_enable(map, chip, adr);
|
||||
break;
|
||||
}
|
@ -0,0 +1,58 @@
|
||||
--- a/arch/mips/Makefile
|
||||
+++ b/arch/mips/Makefile
|
||||
@@ -158,6 +158,26 @@ cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -W
|
||||
endif
|
||||
cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
|
||||
|
||||
+#
|
||||
+# Ralink SoC common stuff
|
||||
+#
|
||||
+core-$(CONFIG_MIPS_RALINK) += arch/mips/ralink/common/
|
||||
+cflags-$(CONFIG_MIPS_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink
|
||||
+
|
||||
+#
|
||||
+# Ralink RT288x
|
||||
+#
|
||||
+core-$(CONFIG_RALINK_RT288X) += arch/mips/ralink/rt288x/
|
||||
+cflags-$(CONFIG_RALINK_RT288X) += -I$(srctree)//arch/mips/include/asm/mach-ralink/rt288x
|
||||
+load-$(CONFIG_RALINK_RT288X) += 0xffffffff88000000
|
||||
+
|
||||
+#
|
||||
+# Ralink RT305x
|
||||
+#
|
||||
+core-$(CONFIG_RALINK_RT305X) += arch/mips/ralink/rt305x/
|
||||
+cflags-$(CONFIG_RALINK_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
|
||||
+load-$(CONFIG_RALINK_RT305X) += 0xffffffff80000000
|
||||
+
|
||||
cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,)
|
||||
cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,)
|
||||
cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,)
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -65,6 +65,9 @@ config AR7
|
||||
Support for the Texas Instruments AR7 System-on-a-Chip
|
||||
family: TNETD7100, 7200 and 7300.
|
||||
|
||||
+config MIPS_RALINK
|
||||
+ bool "Ralink MIPS SoC based boards"
|
||||
+
|
||||
config BCM47XX
|
||||
bool "Broadcom BCM47XX based boards"
|
||||
select CEVT_R4K
|
||||
@@ -722,6 +725,7 @@ source "arch/mips/jazz/Kconfig"
|
||||
source "arch/mips/jz4740/Kconfig"
|
||||
source "arch/mips/lasat/Kconfig"
|
||||
source "arch/mips/pmc-sierra/Kconfig"
|
||||
+source "arch/mips/ralink/Kconfig"
|
||||
source "arch/mips/powertv/Kconfig"
|
||||
source "arch/mips/sgi-ip27/Kconfig"
|
||||
source "arch/mips/sibyte/Kconfig"
|
||||
@@ -1081,7 +1085,7 @@ config BOOT_ELF32
|
||||
|
||||
config MIPS_L1_CACHE_SHIFT
|
||||
int
|
||||
- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
|
||||
+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X
|
||||
default "6" if MIPS_CPU_SCACHE
|
||||
default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
|
||||
default "5"
|
@ -0,0 +1,82 @@
|
||||
--- a/drivers/serial/8250.c
|
||||
+++ b/drivers/serial/8250.c
|
||||
@@ -305,9 +305,9 @@ static const struct serial8250_config ua
|
||||
},
|
||||
};
|
||||
|
||||
-#if defined(CONFIG_MIPS_ALCHEMY)
|
||||
+#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X)
|
||||
|
||||
-/* Au1x00 UART hardware has a weird register layout */
|
||||
+/* Au1x00 and RT288x UART hardware has a weird register layout */
|
||||
static const u8 au_io_in_map[] = {
|
||||
[UART_RX] = 0,
|
||||
[UART_IER] = 2,
|
||||
@@ -571,8 +571,8 @@ static inline void _serial_dl_write(stru
|
||||
serial_outp(up, UART_DLM, value >> 8 & 0xff);
|
||||
}
|
||||
|
||||
-#if defined(CONFIG_MIPS_ALCHEMY)
|
||||
-/* Au1x00 haven't got a standard divisor latch */
|
||||
+#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X)
|
||||
+/* Au1x00 and RT288x haven't got a standard divisor latch */
|
||||
static int serial_dl_read(struct uart_8250_port *up)
|
||||
{
|
||||
if (up->port.iotype == UPIO_AU)
|
||||
@@ -779,22 +779,19 @@ static int size_fifo(struct uart_8250_po
|
||||
*/
|
||||
static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
|
||||
{
|
||||
- unsigned char old_dll, old_dlm, old_lcr;
|
||||
+ unsigned char old_lcr;
|
||||
+ unsigned int old_dl;
|
||||
unsigned int id;
|
||||
|
||||
old_lcr = serial_inp(p, UART_LCR);
|
||||
serial_outp(p, UART_LCR, UART_LCR_DLAB);
|
||||
|
||||
- old_dll = serial_inp(p, UART_DLL);
|
||||
- old_dlm = serial_inp(p, UART_DLM);
|
||||
+ old_dl = serial_dl_read(p);
|
||||
|
||||
- serial_outp(p, UART_DLL, 0);
|
||||
- serial_outp(p, UART_DLM, 0);
|
||||
+ serial_dl_write(p, 0);
|
||||
+ id = serial_dl_read(p);
|
||||
|
||||
- id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
|
||||
-
|
||||
- serial_outp(p, UART_DLL, old_dll);
|
||||
- serial_outp(p, UART_DLM, old_dlm);
|
||||
+ serial_dl_write(p, old_dl);
|
||||
serial_outp(p, UART_LCR, old_lcr);
|
||||
|
||||
return id;
|
||||
--- a/drivers/serial/Kconfig
|
||||
+++ b/drivers/serial/Kconfig
|
||||
@@ -258,6 +258,14 @@ config SERIAL_8250_ACORN
|
||||
system, say Y to this option. The driver can handle 1, 2, or 3 port
|
||||
cards. If unsure, say N.
|
||||
|
||||
+config SERIAL_8250_RT288X
|
||||
+ bool "Ralink RT288x/RT305x serial port support"
|
||||
+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X)
|
||||
+ help
|
||||
+ If you have a Ralink RT288x/RT305x SoC based board and want to use the
|
||||
+ serial port, say Y to this option. The driver can handle up to 2 serial
|
||||
+ ports. If unsure, say N.
|
||||
+
|
||||
config SERIAL_8250_RM9K
|
||||
bool "Support for MIPS RM9xxx integrated serial port"
|
||||
depends on SERIAL_8250 != n && SERIAL_RM9000
|
||||
--- a/include/linux/serial_core.h
|
||||
+++ b/include/linux/serial_core.h
|
||||
@@ -307,7 +307,7 @@ struct uart_port {
|
||||
#define UPIO_HUB6 (1)
|
||||
#define UPIO_MEM (2)
|
||||
#define UPIO_MEM32 (3)
|
||||
-#define UPIO_AU (4) /* Au1x00 type IO */
|
||||
+#define UPIO_AU (4) /* Au1x00 and RT288x type IO */
|
||||
#define UPIO_TSI (5) /* Tsi108/109 type IO */
|
||||
#define UPIO_DWAPB (6) /* DesignWare APB UART */
|
||||
#define UPIO_RM9000 (7) /* RM9000 type IO */
|
@ -0,0 +1,10 @@
|
||||
--- a/arch/mips/pci/Makefile
|
||||
+++ b/arch/mips/pci/Makefile
|
||||
@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capc
|
||||
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
|
||||
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
|
||||
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
|
||||
+obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o
|
||||
|
||||
ifdef CONFIG_PCI_MSI
|
||||
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
|
25
target/linux/ramips/patches-2.6.37/103-ethernet.patch
Normal file
25
target/linux/ramips/patches-2.6.37/103-ethernet.patch
Normal file
@ -0,0 +1,25 @@
|
||||
--- a/drivers/net/Kconfig
|
||||
+++ b/drivers/net/Kconfig
|
||||
@@ -494,6 +494,12 @@ config MIPS_AU1X00_ENET
|
||||
If you have an Alchemy Semi AU1X00 based system
|
||||
say Y. Otherwise, say N.
|
||||
|
||||
+config MIPS_RAMIPS_NET
|
||||
+ tristate "Ethernet driver for rt288x/rt305x"
|
||||
+ depends on MIPS_RALINK
|
||||
+ help
|
||||
+ This driver supports the etehrnet mac inside the ralink wisocs
|
||||
+
|
||||
config SGI_IOC3_ETH
|
||||
bool "SGI IOC3 Ethernet"
|
||||
depends on PCI && SGI_IP27
|
||||
--- a/drivers/net/Makefile
|
||||
+++ b/drivers/net/Makefile
|
||||
@@ -225,6 +225,7 @@ obj-$(CONFIG_KORINA) += korina.o
|
||||
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
|
||||
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
|
||||
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
|
||||
+obj-$(CONFIG_MIPS_RAMIPS_NET) += ramips.o
|
||||
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
|
||||
obj-$(CONFIG_DECLANCE) += declance.o
|
||||
obj-$(CONFIG_ATARILANCE) += atarilance.o
|
@ -0,0 +1,26 @@
|
||||
--- a/drivers/watchdog/Kconfig
|
||||
+++ b/drivers/watchdog/Kconfig
|
||||
@@ -930,6 +930,13 @@ config BCM63XX_WDT
|
||||
To compile this driver as a loadable module, choose M here.
|
||||
The module will be called bcm63xx_wdt.
|
||||
|
||||
+config RAMIPS_WDT
|
||||
+ tristate "Ralink RT288X/RT305X Watchdog Timer"
|
||||
+ depends on SOC_RT288X || SOC_RT305X
|
||||
+ help
|
||||
+ Hardware driver for the built-in watchdog timer on the
|
||||
+ Ralink RT288X/RT305X SoCs.
|
||||
+
|
||||
# PARISC Architecture
|
||||
|
||||
# POWERPC Architecture
|
||||
--- a/drivers/watchdog/Makefile
|
||||
+++ b/drivers/watchdog/Makefile
|
||||
@@ -119,6 +119,7 @@ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
|
||||
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
|
||||
obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
|
||||
octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
|
||||
+obj-$(CONFIG_RAMIPS_WDT) += ramips_wdt.o
|
||||
|
||||
# PARISC Architecture
|
||||
|
116
target/linux/ramips/rt288x/config-2.6.37
Normal file
116
target/linux/ramips/rt288x/config-2.6.37
Normal file
@ -0,0 +1,116 @@
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
# CONFIG_AUTO_IRQ_AFFINITY is not set
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CEVT_R4K=y
|
||||
CONFIG_CEVT_R4K_LIB=y
|
||||
CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
# CONFIG_CMDLINE_OVERRIDE is not set
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_MIPS32=y
|
||||
# CONFIG_CPU_MIPS32_R1 is not set
|
||||
CONFIG_CPU_MIPS32_R2=y
|
||||
CONFIG_CPU_MIPSR2=y
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
CONFIG_CSRC_R4K=y
|
||||
CONFIG_CSRC_R4K_LIB=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_FSNOTIFY is not set
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
|
||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
||||
# CONFIG_GENERIC_PENDING_IRQ is not set
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
# CONFIG_HARDIRQS_SW_RESEND is not set
|
||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_ATTRS=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_GENERIC_HARDIRQS=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
# CONFIG_HAVE_SPARSE_IRQ is not set
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
CONFIG_HW_RANDOM=m
|
||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IRQ_CPU=y
|
||||
# CONFIG_IRQ_PER_CPU is not set
|
||||
# CONFIG_LEDS_GPIO is not set
|
||||
CONFIG_LOONGSON_UART_BASE=y
|
||||
CONFIG_MACH_NO_WESTBRIDGE=y
|
||||
# CONFIG_MII is not set
|
||||
CONFIG_MIPS=y
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=4
|
||||
CONFIG_MIPS_MACHINE=y
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
CONFIG_MIPS_RALINK=y
|
||||
CONFIG_MIPS_RAMIPS_NET=y
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_PER_CPU_KM=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PHYLIB=y
|
||||
# CONFIG_PREEMPT_RCU is not set
|
||||
# CONFIG_QUOTACTL is not set
|
||||
CONFIG_RALINK_DEV_GPIO_BUTTONS=y
|
||||
CONFIG_RALINK_DEV_GPIO_LEDS=y
|
||||
CONFIG_RALINK_RT288X=y
|
||||
# CONFIG_RALINK_RT305X is not set
|
||||
CONFIG_RAMIPS_WDT=y
|
||||
CONFIG_RT288X_MACH_RT_N15=y
|
||||
CONFIG_RT288X_MACH_WZR_AGL300NH=y
|
||||
CONFIG_RTL8366S_PHY=y
|
||||
CONFIG_RTL8366_SMI=y
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_RT288X=y
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLUB=y
|
||||
CONFIG_SOC_RT288X=y
|
||||
CONFIG_SWCONFIG=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
118
target/linux/ramips/rt305x/config-2.6.37
Normal file
118
target/linux/ramips/rt305x/config-2.6.37
Normal file
@ -0,0 +1,118 @@
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
# CONFIG_AUTO_IRQ_AFFINITY is not set
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CEVT_R4K=y
|
||||
CONFIG_CEVT_R4K_LIB=y
|
||||
CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
# CONFIG_CMDLINE_OVERRIDE is not set
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_MIPS32=y
|
||||
# CONFIG_CPU_MIPS32_R1 is not set
|
||||
CONFIG_CPU_MIPS32_R2=y
|
||||
CONFIG_CPU_MIPSR2=y
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
CONFIG_CSRC_R4K=y
|
||||
CONFIG_CSRC_R4K_LIB=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_FSNOTIFY is not set
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
|
||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
||||
# CONFIG_GENERIC_PENDING_IRQ is not set
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
# CONFIG_HARDIRQS_SW_RESEND is not set
|
||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_ATTRS=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_GENERIC_HARDIRQS=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
# CONFIG_HAVE_SPARSE_IRQ is not set
|
||||
CONFIG_HW_RANDOM=m
|
||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IRQ_CPU=y
|
||||
# CONFIG_IRQ_PER_CPU is not set
|
||||
# CONFIG_LEDS_GPIO is not set
|
||||
CONFIG_LOONGSON_UART_BASE=y
|
||||
CONFIG_MACH_NO_WESTBRIDGE=y
|
||||
# CONFIG_MII is not set
|
||||
CONFIG_MIPS=y
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
CONFIG_MIPS_MACHINE=y
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
CONFIG_MIPS_RALINK=y
|
||||
CONFIG_MIPS_RAMIPS_NET=y
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_PER_CPU_KM=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PHYLIB=y
|
||||
# CONFIG_PREEMPT_RCU is not set
|
||||
# CONFIG_QUOTACTL is not set
|
||||
CONFIG_RALINK_DEV_GPIO_BUTTONS=y
|
||||
CONFIG_RALINK_DEV_GPIO_LEDS=y
|
||||
# CONFIG_RALINK_RT288X is not set
|
||||
CONFIG_RALINK_RT305X=y
|
||||
CONFIG_RAMIPS_WDT=y
|
||||
CONFIG_RT305X_MACH_DIR_300_REVB=y
|
||||
CONFIG_RT305X_MACH_F5D8235_V2=y
|
||||
CONFIG_RT305X_MACH_FONERA20N=y
|
||||
CONFIG_RT305X_MACH_HW550_3G=y
|
||||
CONFIG_RT305X_MACH_PWH2004=y
|
||||
CONFIG_RT305X_MACH_V22RW_2X2=y
|
||||
CONFIG_RT305X_MACH_WCR150GN=y
|
||||
CONFIG_RT305X_MACH_WHR_G300N=y
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_RT288X=y
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLUB=y
|
||||
CONFIG_SOC_RT305X=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
# CONFIG_USB_ARCH_HAS_HCD is not set
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
Loading…
Reference in New Issue
Block a user