mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-27 15:15:32 +02:00
uboot: provide a working usbboot mode
This commit is contained in:
Lars-Peter Clausen
parent
592aaa1ba6
commit
a6402204c8
@ -7206,7 +7206,7 @@ new file mode 100644
|
||||
index 0000000..6c3788f
|
||||
--- /dev/null
|
||||
+++ b/cpu/mips/usb_boot.S
|
||||
@@ -0,0 +1,821 @@
|
||||
@@ -0,0 +1,880 @@
|
||||
+/*
|
||||
+ * for jz4740 usb boot
|
||||
+ *
|
||||
@ -7240,6 +7240,65 @@ index 0000000..6c3788f
|
||||
+// So init caches first and then dispatch to a proper boot routine.
|
||||
+//----------------------------------------------------------------------
|
||||
+
|
||||
+.macro load_addr reg addr
|
||||
+ li \reg, 0x80000000
|
||||
+ addiu \reg, \reg, \addr
|
||||
+ la $2, usbboot_begin
|
||||
+ subu \reg, \reg, $2
|
||||
+.endm
|
||||
+
|
||||
+usb_boot:
|
||||
+ //--------------------------------------------------------------
|
||||
+ // Initialize PLL: set ICLK to 84MHz and HCLK to 42MHz.
|
||||
+ //--------------------------------------------------------------
|
||||
+ la $9, 0xB0000000 // CPCCR: Clock Control Register
|
||||
+ la $8, 0x42041110 // I:S:M:P=1:2:2:2
|
||||
+ sw $8, 0($9)
|
||||
+
|
||||
+ la $9, 0xB0000010 // CPPCR: PLL Control Register
|
||||
+ la $8, 0x06000120 // M=12 N=0 D=0 CLK=12*(M+2)/(N+2)
|
||||
+ sw $8, 0($9)
|
||||
+
|
||||
+ mtc0 $0, $26 // CP0_ERRCTL, restore WST reset state
|
||||
+ nop
|
||||
+
|
||||
+ mtc0 $0, $16 // CP0_CONFIG
|
||||
+ nop
|
||||
+
|
||||
+ // Relocate code to beginning of the ram
|
||||
+
|
||||
+ la $2, usbboot_begin
|
||||
+ la $3, usbboot_end
|
||||
+ li $4, 0x80000000
|
||||
+
|
||||
+1:
|
||||
+ lw $5, 0($2)
|
||||
+ sw $5, 0($4)
|
||||
+ addiu $2, $2, 4
|
||||
+ bne $2, $3, 1b
|
||||
+ addiu $4, $4, 4
|
||||
+
|
||||
+ li $2, 0x80000000
|
||||
+ ori $3, $2, 0
|
||||
+ addiu $3, $3, usbboot_end
|
||||
+ la $4, usbboot_begin
|
||||
+ subu $3, $3, $4
|
||||
+
|
||||
+
|
||||
+2:
|
||||
+ cache 0x0, 0($2) // Index_Invalidate_I
|
||||
+ cache 0x1, 0($2) // Index_Writeback_Inv_D
|
||||
+ addiu $2, $2, 32
|
||||
+ subu $4, $3, $2
|
||||
+ bgtz $4, 2b
|
||||
+ nop
|
||||
+
|
||||
+ load_addr $3, usb_boot_return
|
||||
+
|
||||
+ jr $3
|
||||
+
|
||||
+usbboot_begin:
|
||||
+
|
||||
+init_caches:
|
||||
+ li $2, 3 // cacheable for kseg0 access
|
||||
+ mtc0 $2, $16 // CP0_CONFIG
|
||||
@ -7282,20 +7341,31 @@ index 0000000..6c3788f
|
||||
+ // $20: jump target address
|
||||
+ //--------------------------------------------------------------
|
||||
+xfer_d2i:
|
||||
+ ori $2, $28, 0 // start address
|
||||
+ add $3, $2, $19 // end addres
|
||||
+ addiu $3, $3, -4
|
||||
+
|
||||
+xfer_a_word:
|
||||
+ lw $4, 0($2)
|
||||
+ mtc0 $4, $28, 1 // CP0_DATALO
|
||||
+ cache 0xc, 0($2) // Index_Store_Data_I
|
||||
+ bne $2, $3, xfer_a_word
|
||||
+ addiu $2, $2, 4
|
||||
+ ori $8, $20, 0
|
||||
+ addu $9, $8, $19 // total 16KB
|
||||
+
|
||||
+ mtc0 $0, $26 // CP0_ERRCTL, restore WST reset state
|
||||
+1:
|
||||
+ cache 0x0, 0($8) // Index_Invalidate_I
|
||||
+ cache 0x1, 0($8) // Index_Writeback_Inv_D
|
||||
+ bne $8, $9, 1b
|
||||
+ addiu $8, $8, 32
|
||||
+
|
||||
+ jalr $20 // jump, and place the return address in $31
|
||||
+ // flush write-buffer
|
||||
+ sync
|
||||
+
|
||||
+ // Invalidate BTB
|
||||
+ mfc0 $8, $16, 7 // CP0_CONFIG
|
||||
+ nop
|
||||
+ ori $8, 2
|
||||
+ mtc0 $8, $16, 7
|
||||
+ nop
|
||||
+
|
||||
+ // Overwrite config to disable ram initalisation
|
||||
+ li $2, 0xff
|
||||
+ sb $2, 20($20)
|
||||
+
|
||||
+ jalr $20
|
||||
+ nop
|
||||
+
|
||||
+icache_return:
|
||||
@ -7307,18 +7377,6 @@ index 0000000..6c3788f
|
||||
+ nop
|
||||
+
|
||||
+
|
||||
+usb_boot:
|
||||
+ //--------------------------------------------------------------
|
||||
+ // Initialize PLL: set ICLK to 84MHz and HCLK to 42MHz.
|
||||
+ //--------------------------------------------------------------
|
||||
+ la $9, 0xB0000000 // CPCCR: Clock Control Register
|
||||
+ la $8, 0x42041110 // I:S:M:P=1:2:2:2
|
||||
+ sw $8, 0($9)
|
||||
+
|
||||
+ la $9, 0xB0000010 // CPPCR: PLL Control Register
|
||||
+ la $8, 0x06000120 // M=12 N=0 D=0 CLK=12*(M+2)/(N+2)
|
||||
+ sw $8, 0($9)
|
||||
+
|
||||
+usb_boot_return:
|
||||
+ //--------------------------------------------------------------
|
||||
+ // Enable the USB PHY
|
||||
@ -7385,7 +7443,7 @@ index 0000000..6c3788f
|
||||
+
|
||||
+ //--------------------------------------------------------------
|
||||
+ // 2. Check and handle EP0 interrupt
|
||||
+ //--------------------------------------------------------------
|
||||
+ //--------------------------------------------------------------
|
||||
+check_intr_ep0in:
|
||||
+ lhu $10, 0x02($27) // read INTRIN
|
||||
+ andi $9, $10, 0x1 // check EP0 interrupt
|
||||
@ -7460,7 +7518,7 @@ index 0000000..6c3788f
|
||||
+ nop
|
||||
+
|
||||
+__ep0_get_cpu_info:
|
||||
+ la $20, cpu_info_data // data pointer to transfer
|
||||
+ load_addr $20, cpu_info_data // data pointer to transfer
|
||||
+ li $21, 8 // bytes left to transfer
|
||||
+ li $22, 1 // set EP0 to TX state
|
||||
+ li $23, 0 // NoData = 0
|
||||
@ -7524,7 +7582,7 @@ index 0000000..6c3788f
|
||||
+ or $20, $9, $8 // target address
|
||||
+
|
||||
+ b xfer_d2i
|
||||
+ li $19, 0x4000 // 16KB data length
|
||||
+ li $19, 0x2000 // 16KB data length
|
||||
+
|
||||
+__ep0_prog_start2:
|
||||
+ li $9, 0x48 // SVDOUTPKTRDY and DATAEND
|
||||
@ -7600,7 +7658,7 @@ index 0000000..6c3788f
|
||||
+ nop
|
||||
+
|
||||
+___ep0_get_dev_desc:
|
||||
+ la $20, device_desc // data pointer
|
||||
+ load_addr $20, device_desc // data pointer
|
||||
+ li $22, 1 // set EP0 to TX state
|
||||
+ sub $8, $21, 18
|
||||
+ blez $8, _ep0_idle_state_fini // wLength <= 18
|
||||
@ -7610,7 +7668,7 @@ index 0000000..6c3788f
|
||||
+ nop
|
||||
+
|
||||
+___ep0_get_dev_qualifier:
|
||||
+ la $20, dev_qualifier // data pointer
|
||||
+ load_addr $20, dev_qualifier // data pointer
|
||||
+ li $22, 1 // set EP0 to TX state
|
||||
+ sub $8, $21, 10
|
||||
+ blez $8, _ep0_idle_state_fini // wLength <= 10
|
||||
@ -7620,12 +7678,12 @@ index 0000000..6c3788f
|
||||
+ nop
|
||||
+
|
||||
+___ep0_get_conf_desc:
|
||||
+ la $20, config_desc_fs // data pointer of FS mode
|
||||
+ load_addr $20, config_desc_fs // data pointer of FS mode
|
||||
+ lbu $8, 0x01($27) // read POWER
|
||||
+ andi $8, 0x10 // test HS_MODE
|
||||
+ beqz $8, ___ep0_get_conf_desc2
|
||||
+ nop
|
||||
+ la $20, config_desc_hs // data pointer of HS mode
|
||||
+ load_addr $20, config_desc_hs // data pointer of HS mode
|
||||
+
|
||||
+___ep0_get_conf_desc2:
|
||||
+ li $22, 1 // set EP0 to TX state
|
||||
@ -7649,17 +7707,17 @@ index 0000000..6c3788f
|
||||
+ nop
|
||||
+
|
||||
+___ep0_get_string_lang_ids:
|
||||
+ la $20, string_lang_ids // data pointer
|
||||
+ load_addr $20, string_lang_ids // data pointer
|
||||
+ b _ep0_idle_state_fini
|
||||
+ li $21, 4 // data length
|
||||
+
|
||||
+___ep0_get_string_manufacture:
|
||||
+ la $20, string_manufacture // data pointer
|
||||
+ load_addr $20, string_manufacture // data pointer
|
||||
+ b _ep0_idle_state_fini
|
||||
+ li $21, 16 // data length
|
||||
+
|
||||
+___ep0_get_string_product:
|
||||
+ la $20, string_product // data pointer
|
||||
+ load_addr $20, string_product // data pointer
|
||||
+ b _ep0_idle_state_fini
|
||||
+ li $21, 46 // data length
|
||||
+
|
||||
@ -7675,8 +7733,8 @@ index 0000000..6c3788f
|
||||
+
|
||||
+ //--------------------------------------------------------------
|
||||
+ // 2.2 Handle EP0 TX state interrupt
|
||||
+ //--------------------------------------------------------------
|
||||
+ep0_tx_state:
|
||||
+ //--------------------------------------------------------------
|
||||
+ep0_tx_state:
|
||||
+ sub $9, $22, 1
|
||||
+ bnez $9, check_intr_ep1in
|
||||
+ nop
|
||||
@ -8026,6 +8084,7 @@ index 0000000..6c3788f
|
||||
+ .byte 0x30
|
||||
+ .byte 0x56
|
||||
+ .byte 0x31
|
||||
+usbboot_end:
|
||||
+
|
||||
+ .set reorder
|
||||
diff --git a/include/asm-mips/jz4740.h b/include/asm-mips/jz4740.h
|
||||
|
||||
Loading…
Reference in New Issue
Block a user