mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-25 02:48:37 +02:00
Put the files created by the lzma decompressor patch in the files/
directory. Add some early_printk debugging to the lzma decompressor to help track down problems when upgrading from one kernel version to another git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11627 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
parent
9f25933453
commit
be01bc2bd6
@ -2,7 +2,6 @@
|
||||
# CONFIG_64BIT is not set
|
||||
# CONFIG_8139TOO is not set
|
||||
# CONFIG_ACQUIRE_WDT is not set
|
||||
CONFIG_ADM6996_PHY=y
|
||||
# CONFIG_ADVANTECH_WDT is not set
|
||||
# CONFIG_AGP is not set
|
||||
# CONFIG_ALIM1535_WDT is not set
|
||||
@ -63,7 +62,7 @@ CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_EDD is not set
|
||||
# CONFIG_EUROTECH_WDT is not set
|
||||
CONFIG_FAST_CMPXCHG_LOCAL=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
# CONFIG_FIXED_PHY is not set
|
||||
CONFIG_FIX_EARLYCON_MEM=y
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
@ -149,6 +148,7 @@ CONFIG_KEXEC=y
|
||||
CONFIG_KTIME_SCALAR=y
|
||||
# CONFIG_KVM is not set
|
||||
# CONFIG_LATENCYTOP is not set
|
||||
CONFIG_LBD=y
|
||||
# CONFIG_LEDS_ALIX is not set
|
||||
CONFIG_LEDS_GPIO=y
|
||||
# CONFIG_LGUEST is not set
|
||||
@ -168,7 +168,7 @@ CONFIG_MATH_EMULATION=y
|
||||
# CONFIG_MCORE2 is not set
|
||||
# CONFIG_MCRUSOE is not set
|
||||
# CONFIG_MCYRIXIII is not set
|
||||
CONFIG_MDIO_BITBANG=y
|
||||
# CONFIG_MDIO_BITBANG is not set
|
||||
# CONFIG_MEFFICEON is not set
|
||||
# CONFIG_MEMSTICK is not set
|
||||
# CONFIG_MGEODEGX1 is not set
|
||||
@ -245,7 +245,6 @@ CONFIG_MTD_RDC3210_SIZE=0x400000
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
CONFIG_NLS_ISO8859_2=m
|
||||
CONFIG_NOHIGHMEM=y
|
||||
CONFIG_NO_HZ=y
|
||||
# CONFIG_NSC_GPIO is not set
|
||||
CONFIG_NVRAM=y
|
||||
CONFIG_PAGE_OFFSET=0xC0000000
|
||||
@ -273,8 +272,8 @@ CONFIG_PHYSICAL_START=0x100000
|
||||
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
|
||||
# CONFIG_QSEMI_PHY is not set
|
||||
CONFIG_R6040=m
|
||||
CONFIG_REALTEK_PHY=y
|
||||
CONFIG_RELOCATABLE=y
|
||||
# CONFIG_REALTEK_PHY is not set
|
||||
# CONFIG_RELOCATABLE is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
|
||||
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||
@ -284,7 +283,7 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||
# CONFIG_SC1200_WDT is not set
|
||||
# CONFIG_SC520_WDT is not set
|
||||
# CONFIG_SCHED_HRTICK is not set
|
||||
# CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER is not set
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
|
||||
# CONFIG_SCSI_MULTI_LUN is not set
|
||||
CONFIG_SCSI_WAIT_SCAN=m
|
||||
@ -305,7 +304,7 @@ CONFIG_SSB_POSSIBLE=y
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
# CONFIG_TELCLOCK is not set
|
||||
# CONFIG_THERMAL is not set
|
||||
CONFIG_TICK_ONESHOT=y
|
||||
# CONFIG_TICK_ONESHOT is not set
|
||||
# CONFIG_TOSHIBA is not set
|
||||
CONFIG_UID16=y
|
||||
CONFIG_USB=m
|
||||
@ -361,7 +360,7 @@ CONFIG_X86_MSR=y
|
||||
# CONFIG_X86_PAE is not set
|
||||
# CONFIG_X86_PC is not set
|
||||
CONFIG_X86_POPAD_OK=y
|
||||
# CONFIG_X86_PPRO_FENCE is not set
|
||||
CONFIG_X86_PPRO_FENCE=y
|
||||
CONFIG_X86_RDC321X=y
|
||||
CONFIG_X86_REBOOTFIXUPS=y
|
||||
# CONFIG_X86_SUMMIT is not set
|
||||
|
586
target/linux/rdc/files/arch/x86/boot/compressed/LzmaDecode.c
Normal file
586
target/linux/rdc/files/arch/x86/boot/compressed/LzmaDecode.c
Normal file
@ -0,0 +1,586 @@
|
||||
/*
|
||||
LzmaDecode.c
|
||||
LZMA Decoder (optimized for Speed version)
|
||||
|
||||
LZMA SDK 4.17 Copyright (c) 1999-2005 Igor Pavlov (2005-04-05)
|
||||
http://www.7-zip.org/
|
||||
|
||||
LZMA SDK is licensed under two licenses:
|
||||
1) GNU Lesser General Public License (GNU LGPL)
|
||||
2) Common Public License (CPL)
|
||||
It means that you can select one of these two licenses and
|
||||
follow rules of that license.
|
||||
|
||||
SPECIAL EXCEPTION:
|
||||
Igor Pavlov, as the author of this Code, expressly permits you to
|
||||
statically or dynamically link your Code (or bind by name) to the
|
||||
interfaces of this file without subjecting your linked Code to the
|
||||
terms of the CPL or GNU LGPL. Any modifications or additions
|
||||
to this file, however, are subject to the LGPL or CPL terms.
|
||||
*/
|
||||
|
||||
#include "LzmaDecode.h"
|
||||
|
||||
#ifndef Byte
|
||||
#define Byte unsigned char
|
||||
#endif
|
||||
|
||||
#define kNumTopBits 24
|
||||
#define kTopValue ((UInt32)1 << kNumTopBits)
|
||||
|
||||
#define kNumBitModelTotalBits 11
|
||||
#define kBitModelTotal (1 << kNumBitModelTotalBits)
|
||||
#define kNumMoveBits 5
|
||||
|
||||
#define RC_READ_BYTE (*Buffer++)
|
||||
|
||||
#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
|
||||
{ int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
|
||||
|
||||
#ifdef _LZMA_IN_CB
|
||||
|
||||
#define RC_TEST { if (Buffer == BufferLim) \
|
||||
{ UInt32 size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
|
||||
BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
|
||||
|
||||
#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
|
||||
|
||||
#else
|
||||
|
||||
#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
|
||||
|
||||
#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
|
||||
|
||||
#endif
|
||||
|
||||
#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
|
||||
|
||||
#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
|
||||
#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
|
||||
#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
|
||||
|
||||
#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
|
||||
{ UpdateBit0(p); mi <<= 1; A0; } else \
|
||||
{ UpdateBit1(p); mi = (mi + mi) + 1; A1; }
|
||||
|
||||
#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)
|
||||
|
||||
#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
|
||||
{ int i = numLevels; res = 1; \
|
||||
do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
|
||||
res -= (1 << numLevels); }
|
||||
|
||||
|
||||
#define kNumPosBitsMax 4
|
||||
#define kNumPosStatesMax (1 << kNumPosBitsMax)
|
||||
|
||||
#define kLenNumLowBits 3
|
||||
#define kLenNumLowSymbols (1 << kLenNumLowBits)
|
||||
#define kLenNumMidBits 3
|
||||
#define kLenNumMidSymbols (1 << kLenNumMidBits)
|
||||
#define kLenNumHighBits 8
|
||||
#define kLenNumHighSymbols (1 << kLenNumHighBits)
|
||||
|
||||
#define LenChoice 0
|
||||
#define LenChoice2 (LenChoice + 1)
|
||||
#define LenLow (LenChoice2 + 1)
|
||||
#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
|
||||
#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
|
||||
#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
|
||||
|
||||
|
||||
#define kNumStates 12
|
||||
#define kNumLitStates 7
|
||||
|
||||
#define kStartPosModelIndex 4
|
||||
#define kEndPosModelIndex 14
|
||||
#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
|
||||
|
||||
#define kNumPosSlotBits 6
|
||||
#define kNumLenToPosStates 4
|
||||
|
||||
#define kNumAlignBits 4
|
||||
#define kAlignTableSize (1 << kNumAlignBits)
|
||||
|
||||
#define kMatchMinLen 2
|
||||
|
||||
#define IsMatch 0
|
||||
#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
|
||||
#define IsRepG0 (IsRep + kNumStates)
|
||||
#define IsRepG1 (IsRepG0 + kNumStates)
|
||||
#define IsRepG2 (IsRepG1 + kNumStates)
|
||||
#define IsRep0Long (IsRepG2 + kNumStates)
|
||||
#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
|
||||
#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
|
||||
#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
|
||||
#define LenCoder (Align + kAlignTableSize)
|
||||
#define RepLenCoder (LenCoder + kNumLenProbs)
|
||||
#define Literal (RepLenCoder + kNumLenProbs)
|
||||
|
||||
#if Literal != LZMA_BASE_SIZE
|
||||
StopCompilingDueBUG
|
||||
#endif
|
||||
|
||||
#ifdef _LZMA_OUT_READ
|
||||
|
||||
typedef struct _LzmaVarState
|
||||
{
|
||||
Byte *Buffer;
|
||||
Byte *BufferLim;
|
||||
UInt32 Range;
|
||||
UInt32 Code;
|
||||
#ifdef _LZMA_IN_CB
|
||||
ILzmaInCallback *InCallback;
|
||||
#endif
|
||||
Byte *Dictionary;
|
||||
UInt32 DictionarySize;
|
||||
UInt32 DictionaryPos;
|
||||
UInt32 GlobalPos;
|
||||
UInt32 Reps[4];
|
||||
int lc;
|
||||
int lp;
|
||||
int pb;
|
||||
int State;
|
||||
int RemainLen;
|
||||
Byte TempDictionary[4];
|
||||
} LzmaVarState;
|
||||
|
||||
int LzmaDecoderInit(
|
||||
unsigned char *buffer, UInt32 bufferSize,
|
||||
int lc, int lp, int pb,
|
||||
unsigned char *dictionary, UInt32 dictionarySize,
|
||||
#ifdef _LZMA_IN_CB
|
||||
ILzmaInCallback *InCallback
|
||||
#else
|
||||
unsigned char *inStream, UInt32 inSize
|
||||
#endif
|
||||
)
|
||||
{
|
||||
Byte *Buffer;
|
||||
Byte *BufferLim;
|
||||
UInt32 Range;
|
||||
UInt32 Code;
|
||||
LzmaVarState *vs = (LzmaVarState *)buffer;
|
||||
CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
|
||||
UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
|
||||
UInt32 i;
|
||||
if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
|
||||
return LZMA_RESULT_NOT_ENOUGH_MEM;
|
||||
vs->Dictionary = dictionary;
|
||||
vs->DictionarySize = dictionarySize;
|
||||
vs->DictionaryPos = 0;
|
||||
vs->GlobalPos = 0;
|
||||
vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
|
||||
vs->lc = lc;
|
||||
vs->lp = lp;
|
||||
vs->pb = pb;
|
||||
vs->State = 0;
|
||||
vs->RemainLen = 0;
|
||||
dictionary[dictionarySize - 1] = 0;
|
||||
for (i = 0; i < numProbs; i++)
|
||||
p[i] = kBitModelTotal >> 1;
|
||||
|
||||
#ifdef _LZMA_IN_CB
|
||||
RC_INIT;
|
||||
#else
|
||||
RC_INIT(inStream, inSize);
|
||||
#endif
|
||||
vs->Buffer = Buffer;
|
||||
vs->BufferLim = BufferLim;
|
||||
vs->Range = Range;
|
||||
vs->Code = Code;
|
||||
#ifdef _LZMA_IN_CB
|
||||
vs->InCallback = InCallback;
|
||||
#endif
|
||||
|
||||
return LZMA_RESULT_OK;
|
||||
}
|
||||
|
||||
int LzmaDecode(unsigned char *buffer,
|
||||
unsigned char *outStream, UInt32 outSize,
|
||||
UInt32 *outSizeProcessed)
|
||||
{
|
||||
LzmaVarState *vs = (LzmaVarState *)buffer;
|
||||
Byte *Buffer = vs->Buffer;
|
||||
Byte *BufferLim = vs->BufferLim;
|
||||
UInt32 Range = vs->Range;
|
||||
UInt32 Code = vs->Code;
|
||||
#ifdef _LZMA_IN_CB
|
||||
ILzmaInCallback *InCallback = vs->InCallback;
|
||||
#endif
|
||||
CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
|
||||
int state = vs->State;
|
||||
Byte previousByte;
|
||||
UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
|
||||
UInt32 nowPos = 0;
|
||||
UInt32 posStateMask = (1 << (vs->pb)) - 1;
|
||||
UInt32 literalPosMask = (1 << (vs->lp)) - 1;
|
||||
int lc = vs->lc;
|
||||
int len = vs->RemainLen;
|
||||
UInt32 globalPos = vs->GlobalPos;
|
||||
|
||||
Byte *dictionary = vs->Dictionary;
|
||||
UInt32 dictionarySize = vs->DictionarySize;
|
||||
UInt32 dictionaryPos = vs->DictionaryPos;
|
||||
|
||||
Byte tempDictionary[4];
|
||||
if (dictionarySize == 0)
|
||||
{
|
||||
dictionary = tempDictionary;
|
||||
dictionarySize = 1;
|
||||
tempDictionary[0] = vs->TempDictionary[0];
|
||||
}
|
||||
|
||||
if (len == -1)
|
||||
{
|
||||
*outSizeProcessed = 0;
|
||||
return LZMA_RESULT_OK;
|
||||
}
|
||||
|
||||
while(len != 0 && nowPos < outSize)
|
||||
{
|
||||
UInt32 pos = dictionaryPos - rep0;
|
||||
if (pos >= dictionarySize)
|
||||
pos += dictionarySize;
|
||||
outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
|
||||
if (++dictionaryPos == dictionarySize)
|
||||
dictionaryPos = 0;
|
||||
len--;
|
||||
}
|
||||
if (dictionaryPos == 0)
|
||||
previousByte = dictionary[dictionarySize - 1];
|
||||
else
|
||||
previousByte = dictionary[dictionaryPos - 1];
|
||||
#else
|
||||
|
||||
int LzmaDecode(
|
||||
Byte *buffer, UInt32 bufferSize,
|
||||
int lc, int lp, int pb,
|
||||
#ifdef _LZMA_IN_CB
|
||||
ILzmaInCallback *InCallback,
|
||||
#else
|
||||
unsigned char *inStream, UInt32 inSize,
|
||||
#endif
|
||||
unsigned char *outStream, UInt32 outSize,
|
||||
UInt32 *outSizeProcessed)
|
||||
{
|
||||
UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
|
||||
CProb *p = (CProb *)buffer;
|
||||
|
||||
UInt32 i;
|
||||
int state = 0;
|
||||
Byte previousByte = 0;
|
||||
UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
|
||||
UInt32 nowPos = 0;
|
||||
UInt32 posStateMask = (1 << pb) - 1;
|
||||
UInt32 literalPosMask = (1 << lp) - 1;
|
||||
int len = 0;
|
||||
|
||||
Byte *Buffer;
|
||||
Byte *BufferLim;
|
||||
UInt32 Range;
|
||||
UInt32 Code;
|
||||
|
||||
if (bufferSize < numProbs * sizeof(CProb))
|
||||
return LZMA_RESULT_NOT_ENOUGH_MEM;
|
||||
for (i = 0; i < numProbs; i++)
|
||||
p[i] = kBitModelTotal >> 1;
|
||||
|
||||
|
||||
#ifdef _LZMA_IN_CB
|
||||
RC_INIT;
|
||||
#else
|
||||
RC_INIT(inStream, inSize);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
*outSizeProcessed = 0;
|
||||
while(nowPos < outSize)
|
||||
{
|
||||
CProb *prob;
|
||||
UInt32 bound;
|
||||
int posState = (int)(
|
||||
(nowPos
|
||||
#ifdef _LZMA_OUT_READ
|
||||
+ globalPos
|
||||
#endif
|
||||
)
|
||||
& posStateMask);
|
||||
|
||||
prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
|
||||
IfBit0(prob)
|
||||
{
|
||||
int symbol = 1;
|
||||
UpdateBit0(prob)
|
||||
prob = p + Literal + (LZMA_LIT_SIZE *
|
||||
(((
|
||||
(nowPos
|
||||
#ifdef _LZMA_OUT_READ
|
||||
+ globalPos
|
||||
#endif
|
||||
)
|
||||
& literalPosMask) << lc) + (previousByte >> (8 - lc))));
|
||||
|
||||
if (state >= kNumLitStates)
|
||||
{
|
||||
int matchByte;
|
||||
#ifdef _LZMA_OUT_READ
|
||||
UInt32 pos = dictionaryPos - rep0;
|
||||
if (pos >= dictionarySize)
|
||||
pos += dictionarySize;
|
||||
matchByte = dictionary[pos];
|
||||
#else
|
||||
matchByte = outStream[nowPos - rep0];
|
||||
#endif
|
||||
do
|
||||
{
|
||||
int bit;
|
||||
CProb *probLit;
|
||||
matchByte <<= 1;
|
||||
bit = (matchByte & 0x100);
|
||||
probLit = prob + 0x100 + bit + symbol;
|
||||
RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
|
||||
}
|
||||
while (symbol < 0x100);
|
||||
}
|
||||
while (symbol < 0x100)
|
||||
{
|
||||
CProb *probLit = prob + symbol;
|
||||
RC_GET_BIT(probLit, symbol)
|
||||
}
|
||||
previousByte = (Byte)symbol;
|
||||
|
||||
outStream[nowPos++] = previousByte;
|
||||
#ifdef _LZMA_OUT_READ
|
||||
dictionary[dictionaryPos] = previousByte;
|
||||
if (++dictionaryPos == dictionarySize)
|
||||
dictionaryPos = 0;
|
||||
#endif
|
||||
if (state < 4) state = 0;
|
||||
else if (state < 10) state -= 3;
|
||||
else state -= 6;
|
||||
}
|
||||
else
|
||||
{
|
||||
UpdateBit1(prob);
|
||||
prob = p + IsRep + state;
|
||||
IfBit0(prob)
|
||||
{
|
||||
UpdateBit0(prob);
|
||||
rep3 = rep2;
|
||||
rep2 = rep1;
|
||||
rep1 = rep0;
|
||||
state = state < kNumLitStates ? 0 : 3;
|
||||
prob = p + LenCoder;
|
||||
}
|
||||
else
|
||||
{
|
||||
UpdateBit1(prob);
|
||||
prob = p + IsRepG0 + state;
|
||||
IfBit0(prob)
|
||||
{
|
||||
UpdateBit0(prob);
|
||||
prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
|
||||
IfBit0(prob)
|
||||
{
|
||||
#ifdef _LZMA_OUT_READ
|
||||
UInt32 pos;
|
||||
#endif
|
||||
UpdateBit0(prob);
|
||||
if (nowPos
|
||||
#ifdef _LZMA_OUT_READ
|
||||
+ globalPos
|
||||
#endif
|
||||
== 0)
|
||||
return LZMA_RESULT_DATA_ERROR;
|
||||
state = state < kNumLitStates ? 9 : 11;
|
||||
#ifdef _LZMA_OUT_READ
|
||||
pos = dictionaryPos - rep0;
|
||||
if (pos >= dictionarySize)
|
||||
pos += dictionarySize;
|
||||
previousByte = dictionary[pos];
|
||||
dictionary[dictionaryPos] = previousByte;
|
||||
if (++dictionaryPos == dictionarySize)
|
||||
dictionaryPos = 0;
|
||||
#else
|
||||
previousByte = outStream[nowPos - rep0];
|
||||
#endif
|
||||
outStream[nowPos++] = previousByte;
|
||||
continue;
|
||||
}
|
||||
else
|
||||
{
|
||||
UpdateBit1(prob);
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
UInt32 distance;
|
||||
UpdateBit1(prob);
|
||||
prob = p + IsRepG1 + state;
|
||||
IfBit0(prob)
|
||||
{
|
||||
UpdateBit0(prob);
|
||||
distance = rep1;
|
||||
}
|
||||
else
|
||||
{
|
||||
UpdateBit1(prob);
|
||||
prob = p + IsRepG2 + state;
|
||||
IfBit0(prob)
|
||||
{
|
||||
UpdateBit0(prob);
|
||||
distance = rep2;
|
||||
}
|
||||
else
|
||||
{
|
||||
UpdateBit1(prob);
|
||||
distance = rep3;
|
||||
rep3 = rep2;
|
||||
}
|
||||
rep2 = rep1;
|
||||
}
|
||||
rep1 = rep0;
|
||||
rep0 = distance;
|
||||
}
|
||||
state = state < kNumLitStates ? 8 : 11;
|
||||
prob = p + RepLenCoder;
|
||||
}
|
||||
{
|
||||
int numBits, offset;
|
||||
CProb *probLen = prob + LenChoice;
|
||||
IfBit0(probLen)
|
||||
{
|
||||
UpdateBit0(probLen);
|
||||
probLen = prob + LenLow + (posState << kLenNumLowBits);
|
||||
offset = 0;
|
||||
numBits = kLenNumLowBits;
|
||||
}
|
||||
else
|
||||
{
|
||||
UpdateBit1(probLen);
|
||||
probLen = prob + LenChoice2;
|
||||
IfBit0(probLen)
|
||||
{
|
||||
UpdateBit0(probLen);
|
||||
probLen = prob + LenMid + (posState << kLenNumMidBits);
|
||||
offset = kLenNumLowSymbols;
|
||||
numBits = kLenNumMidBits;
|
||||
}
|
||||
else
|
||||
{
|
||||
UpdateBit1(probLen);
|
||||
probLen = prob + LenHigh;
|
||||
offset = kLenNumLowSymbols + kLenNumMidSymbols;
|
||||
numBits = kLenNumHighBits;
|
||||
}
|
||||
}
|
||||
RangeDecoderBitTreeDecode(probLen, numBits, len);
|
||||
len += offset;
|
||||
}
|
||||
|
||||
if (state < 4)
|
||||
{
|
||||
int posSlot;
|
||||
state += kNumLitStates;
|
||||
prob = p + PosSlot +
|
||||
((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
|
||||
kNumPosSlotBits);
|
||||
RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
|
||||
if (posSlot >= kStartPosModelIndex)
|
||||
{
|
||||
int numDirectBits = ((posSlot >> 1) - 1);
|
||||
rep0 = (2 | ((UInt32)posSlot & 1));
|
||||
if (posSlot < kEndPosModelIndex)
|
||||
{
|
||||
rep0 <<= numDirectBits;
|
||||
prob = p + SpecPos + rep0 - posSlot - 1;
|
||||
}
|
||||
else
|
||||
{
|
||||
numDirectBits -= kNumAlignBits;
|
||||
do
|
||||
{
|
||||
RC_NORMALIZE
|
||||
Range >>= 1;
|
||||
rep0 <<= 1;
|
||||
if (Code >= Range)
|
||||
{
|
||||
Code -= Range;
|
||||
rep0 |= 1;
|
||||
}
|
||||
}
|
||||
while (--numDirectBits != 0);
|
||||
prob = p + Align;
|
||||
rep0 <<= kNumAlignBits;
|
||||
numDirectBits = kNumAlignBits;
|
||||
}
|
||||
{
|
||||
int i = 1;
|
||||
int mi = 1;
|
||||
do
|
||||
{
|
||||
CProb *prob3 = prob + mi;
|
||||
RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
|
||||
i <<= 1;
|
||||
}
|
||||
while(--numDirectBits != 0);
|
||||
}
|
||||
}
|
||||
else
|
||||
rep0 = posSlot;
|
||||
if (++rep0 == (UInt32)(0))
|
||||
{
|
||||
/* it's for stream version */
|
||||
len = -1;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
len += kMatchMinLen;
|
||||
if (rep0 > nowPos
|
||||
#ifdef _LZMA_OUT_READ
|
||||
+ globalPos || rep0 > dictionarySize
|
||||
#endif
|
||||
)
|
||||
return LZMA_RESULT_DATA_ERROR;
|
||||
do
|
||||
{
|
||||
#ifdef _LZMA_OUT_READ
|
||||
UInt32 pos = dictionaryPos - rep0;
|
||||
if (pos >= dictionarySize)
|
||||
pos += dictionarySize;
|
||||
previousByte = dictionary[pos];
|
||||
dictionary[dictionaryPos] = previousByte;
|
||||
if (++dictionaryPos == dictionarySize)
|
||||
dictionaryPos = 0;
|
||||
#else
|
||||
previousByte = outStream[nowPos - rep0];
|
||||
#endif
|
||||
len--;
|
||||
outStream[nowPos++] = previousByte;
|
||||
}
|
||||
while(len != 0 && nowPos < outSize);
|
||||
}
|
||||
}
|
||||
RC_NORMALIZE;
|
||||
|
||||
#ifdef _LZMA_OUT_READ
|
||||
vs->Buffer = Buffer;
|
||||
vs->BufferLim = BufferLim;
|
||||
vs->Range = Range;
|
||||
vs->Code = Code;
|
||||
vs->DictionaryPos = dictionaryPos;
|
||||
vs->GlobalPos = globalPos + nowPos;
|
||||
vs->Reps[0] = rep0;
|
||||
vs->Reps[1] = rep1;
|
||||
vs->Reps[2] = rep2;
|
||||
vs->Reps[3] = rep3;
|
||||
vs->State = state;
|
||||
vs->RemainLen = len;
|
||||
vs->TempDictionary[0] = tempDictionary[0];
|
||||
#endif
|
||||
|
||||
*outSizeProcessed = nowPos;
|
||||
return LZMA_RESULT_OK;
|
||||
}
|
100
target/linux/rdc/files/arch/x86/boot/compressed/LzmaDecode.h
Normal file
100
target/linux/rdc/files/arch/x86/boot/compressed/LzmaDecode.h
Normal file
@ -0,0 +1,100 @@
|
||||
/*
|
||||
LzmaDecode.h
|
||||
LZMA Decoder interface
|
||||
|
||||
LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18)
|
||||
http://www.7-zip.org/
|
||||
|
||||
LZMA SDK is licensed under two licenses:
|
||||
1) GNU Lesser General Public License (GNU LGPL)
|
||||
2) Common Public License (CPL)
|
||||
It means that you can select one of these two licenses and
|
||||
follow rules of that license.
|
||||
|
||||
SPECIAL EXCEPTION:
|
||||
Igor Pavlov, as the author of this code, expressly permits you to
|
||||
statically or dynamically link your code (or bind by name) to the
|
||||
interfaces of this file without subjecting your linked code to the
|
||||
terms of the CPL or GNU LGPL. Any modifications or additions
|
||||
to this file, however, are subject to the LGPL or CPL terms.
|
||||
*/
|
||||
|
||||
#ifndef __LZMADECODE_H
|
||||
#define __LZMADECODE_H
|
||||
|
||||
/* #define _LZMA_IN_CB */
|
||||
/* Use callback for input data */
|
||||
|
||||
/* #define _LZMA_OUT_READ */
|
||||
/* Use read function for output data */
|
||||
|
||||
/* #define _LZMA_PROB32 */
|
||||
/* It can increase speed on some 32-bit CPUs,
|
||||
but memory usage will be doubled in that case */
|
||||
|
||||
/* #define _LZMA_LOC_OPT */
|
||||
/* Enable local speed optimizations inside code */
|
||||
|
||||
#ifndef UInt32
|
||||
#ifdef _LZMA_UINT32_IS_ULONG
|
||||
#define UInt32 unsigned long
|
||||
#else
|
||||
#define UInt32 unsigned int
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef _LZMA_PROB32
|
||||
#define CProb UInt32
|
||||
#else
|
||||
#define CProb unsigned short
|
||||
#endif
|
||||
|
||||
#define LZMA_RESULT_OK 0
|
||||
#define LZMA_RESULT_DATA_ERROR 1
|
||||
#define LZMA_RESULT_NOT_ENOUGH_MEM 2
|
||||
|
||||
#ifdef _LZMA_IN_CB
|
||||
typedef struct _ILzmaInCallback
|
||||
{
|
||||
int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
|
||||
} ILzmaInCallback;
|
||||
#endif
|
||||
|
||||
#define LZMA_BASE_SIZE 1846
|
||||
#define LZMA_LIT_SIZE 768
|
||||
|
||||
/*
|
||||
bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
|
||||
bufferSize += 100 in case of _LZMA_OUT_READ
|
||||
by default CProb is unsigned short,
|
||||
but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
|
||||
*/
|
||||
|
||||
#ifdef _LZMA_OUT_READ
|
||||
int LzmaDecoderInit(
|
||||
unsigned char *buffer, UInt32 bufferSize,
|
||||
int lc, int lp, int pb,
|
||||
unsigned char *dictionary, UInt32 dictionarySize,
|
||||
#ifdef _LZMA_IN_CB
|
||||
ILzmaInCallback *inCallback
|
||||
#else
|
||||
unsigned char *inStream, UInt32 inSize
|
||||
#endif
|
||||
);
|
||||
#endif
|
||||
|
||||
int LzmaDecode(
|
||||
unsigned char *buffer,
|
||||
#ifndef _LZMA_OUT_READ
|
||||
UInt32 bufferSize,
|
||||
int lc, int lp, int pb,
|
||||
#ifdef _LZMA_IN_CB
|
||||
ILzmaInCallback *inCallback,
|
||||
#else
|
||||
unsigned char *inStream, UInt32 inSize,
|
||||
#endif
|
||||
#endif
|
||||
unsigned char *outStream, UInt32 outSize,
|
||||
UInt32 *outSizeProcessed);
|
||||
|
||||
#endif
|
345
target/linux/rdc/files/arch/x86/boot/compressed/lzma_misc.c
Normal file
345
target/linux/rdc/files/arch/x86/boot/compressed/lzma_misc.c
Normal file
@ -0,0 +1,345 @@
|
||||
/*
|
||||
* lzma_misc.c
|
||||
*
|
||||
* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
|
||||
* puts by Nick Holloway 1993, better puts by Martin Mares 1995
|
||||
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
|
||||
*
|
||||
* Decompress LZMA compressed vmlinuz
|
||||
* Version 0.9 Copyright (c) Ming-Ching Tiew mctiew@yahoo.com
|
||||
* Program adapted from misc.c for 2.6 kernel
|
||||
* Forward ported to latest 2.6 version of misc.c by
|
||||
* Felix Fietkau <nbd@openwrt.org>
|
||||
*/
|
||||
|
||||
#undef CONFIG_PARAVIRT
|
||||
#include <linux/linkage.h>
|
||||
#include <linux/vmalloc.h>
|
||||
#include <linux/screen_info.h>
|
||||
#include <linux/console.h>
|
||||
#include <linux/string.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/page.h>
|
||||
#include <asm/boot.h>
|
||||
|
||||
/* WARNING!!
|
||||
* This code is compiled with -fPIC and it is relocated dynamically
|
||||
* at run time, but no relocation processing is performed.
|
||||
* This means that it is not safe to place pointers in static structures.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Getting to provable safe in place decompression is hard.
|
||||
* Worst case behaviours need to be analized.
|
||||
* Background information:
|
||||
*
|
||||
* The file layout is:
|
||||
* magic[2]
|
||||
* method[1]
|
||||
* flags[1]
|
||||
* timestamp[4]
|
||||
* extraflags[1]
|
||||
* os[1]
|
||||
* compressed data blocks[N]
|
||||
* crc[4] orig_len[4]
|
||||
*
|
||||
* resulting in 18 bytes of non compressed data overhead.
|
||||
*
|
||||
* Files divided into blocks
|
||||
* 1 bit (last block flag)
|
||||
* 2 bits (block type)
|
||||
*
|
||||
* 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
|
||||
* The smallest block type encoding is always used.
|
||||
*
|
||||
* stored:
|
||||
* 32 bits length in bytes.
|
||||
*
|
||||
* fixed:
|
||||
* magic fixed tree.
|
||||
* symbols.
|
||||
*
|
||||
* dynamic:
|
||||
* dynamic tree encoding.
|
||||
* symbols.
|
||||
*
|
||||
*
|
||||
* The buffer for decompression in place is the length of the
|
||||
* uncompressed data, plus a small amount extra to keep the algorithm safe.
|
||||
* The compressed data is placed at the end of the buffer. The output
|
||||
* pointer is placed at the start of the buffer and the input pointer
|
||||
* is placed where the compressed data starts. Problems will occur
|
||||
* when the output pointer overruns the input pointer.
|
||||
*
|
||||
* The output pointer can only overrun the input pointer if the input
|
||||
* pointer is moving faster than the output pointer. A condition only
|
||||
* triggered by data whose compressed form is larger than the uncompressed
|
||||
* form.
|
||||
*
|
||||
* The worst case at the block level is a growth of the compressed data
|
||||
* of 5 bytes per 32767 bytes.
|
||||
*
|
||||
* The worst case internal to a compressed block is very hard to figure.
|
||||
* The worst case can at least be boundined by having one bit that represents
|
||||
* 32764 bytes and then all of the rest of the bytes representing the very
|
||||
* very last byte.
|
||||
*
|
||||
* All of which is enough to compute an amount of extra data that is required
|
||||
* to be safe. To avoid problems at the block level allocating 5 extra bytes
|
||||
* per 32767 bytes of data is sufficient. To avoind problems internal to a block
|
||||
* adding an extra 32767 bytes (the worst case uncompressed block size) is
|
||||
* sufficient, to ensure that in the worst case the decompressed data for
|
||||
* block will stop the byte before the compressed data for a block begins.
|
||||
* To avoid problems with the compressed data's meta information an extra 18
|
||||
* bytes are needed. Leading to the formula:
|
||||
*
|
||||
* extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
|
||||
*
|
||||
* Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
|
||||
* Adding 32768 instead of 32767 just makes for round numbers.
|
||||
* Adding the decompressor_size is necessary as it musht live after all
|
||||
* of the data as well. Last I measured the decompressor is about 14K.
|
||||
* 10K of actuall data and 4K of bss.
|
||||
*
|
||||
*/
|
||||
|
||||
/*
|
||||
* gzip declarations
|
||||
*/
|
||||
|
||||
#define OF(args) args
|
||||
#define STATIC static
|
||||
|
||||
#undef memcpy
|
||||
|
||||
typedef unsigned char uch;
|
||||
typedef unsigned short ush;
|
||||
typedef unsigned long ulg;
|
||||
|
||||
#define WSIZE 0x80000000 /* Window size must be at least 32k,
|
||||
* and a power of two
|
||||
* We don't actually have a window just
|
||||
* a huge output buffer so I report
|
||||
* a 2G windows size, as that should
|
||||
* always be larger than our output buffer.
|
||||
*/
|
||||
|
||||
static uch *inbuf; /* input buffer */
|
||||
static uch *window; /* Sliding window buffer, (and final output buffer) */
|
||||
|
||||
static unsigned insize; /* valid bytes in inbuf */
|
||||
static unsigned inptr; /* index of next byte to be processed in inbuf */
|
||||
static unsigned long workspace;
|
||||
|
||||
#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
|
||||
|
||||
/* Diagnostic functions */
|
||||
#ifdef DEBUG
|
||||
# define Assert(cond,msg) {if(!(cond)) error(msg);}
|
||||
# define Trace(x) fprintf x
|
||||
# define Tracev(x) {if (verbose) fprintf x ;}
|
||||
# define Tracevv(x) {if (verbose>1) fprintf x ;}
|
||||
# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
|
||||
# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
|
||||
#else
|
||||
# define Assert(cond,msg)
|
||||
# define Trace(x)
|
||||
# define Tracev(x)
|
||||
# define Tracevv(x)
|
||||
# define Tracec(c,x)
|
||||
# define Tracecv(c,x)
|
||||
#endif
|
||||
|
||||
static int fill_inbuf(void);
|
||||
|
||||
/*
|
||||
* This is set up by the setup-routine at boot-time
|
||||
*/
|
||||
static unsigned char *real_mode; /* Pointer to real-mode data */
|
||||
extern unsigned char input_data[];
|
||||
extern int input_len;
|
||||
|
||||
static void error(char *x);
|
||||
static void *memcpy(void *dest, const void *src, unsigned n);
|
||||
|
||||
#ifdef CONFIG_X86_NUMAQ
|
||||
void *xquad_portio;
|
||||
#endif
|
||||
|
||||
static void* memcpy(void* dest, const void* src, unsigned n)
|
||||
{
|
||||
int i;
|
||||
char *d = (char *)dest, *s = (char *)src;
|
||||
|
||||
for (i=0;i<n;i++) d[i] = s[i];
|
||||
return dest;
|
||||
}
|
||||
|
||||
/* ===========================================================================
|
||||
* Fill the input buffer. This is called only when the buffer is empty
|
||||
* and at least one byte is really needed.
|
||||
*/
|
||||
static int fill_inbuf(void)
|
||||
{
|
||||
error("ran out of input data");
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
// When using LZMA in callback, the compressed length is not needed.
|
||||
// Otherwise you need a special version of lzma compression program
|
||||
// which will pad the compressed length in the header.
|
||||
#define _LZMA_IN_CB
|
||||
#include "LzmaDecode.h"
|
||||
#include "LzmaDecode.c"
|
||||
|
||||
static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize);
|
||||
|
||||
static int early_serial_base = 0x3f8; /* ttyS0 */
|
||||
|
||||
#define XMTRDY 0x20
|
||||
|
||||
#define DLAB 0x80
|
||||
|
||||
#define TXR 0 /* Transmit register (WRITE) */
|
||||
#define RXR 0 /* Receive register (READ) */
|
||||
#define IER 1 /* Interrupt Enable */
|
||||
#define IIR 2 /* Interrupt ID */
|
||||
#define FCR 2 /* FIFO control */
|
||||
#define LCR 3 /* Line control */
|
||||
#define MCR 4 /* Modem control */
|
||||
#define LSR 5 /* Line Status */
|
||||
#define MSR 6 /* Modem Status */
|
||||
#define DLL 0 /* Divisor Latch Low */
|
||||
#define DLH 1 /* Divisor latch High */
|
||||
|
||||
static int early_serial_putc(unsigned char ch)
|
||||
{
|
||||
unsigned timeout = 0xffff;
|
||||
while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
|
||||
cpu_relax();
|
||||
outb(ch, early_serial_base + TXR);
|
||||
return timeout ? 0 : -1;
|
||||
}
|
||||
|
||||
static void early_serial_write(const char *s, unsigned n)
|
||||
{
|
||||
while (*s && n-- > 0) {
|
||||
if (*s == '\n')
|
||||
early_serial_putc('\r');
|
||||
early_serial_putc(*s);
|
||||
s++;
|
||||
}
|
||||
}
|
||||
|
||||
#define DEFAULT_BAUD 38400
|
||||
|
||||
static __init void early_serial_init(void)
|
||||
{
|
||||
unsigned char c;
|
||||
unsigned divisor;
|
||||
unsigned baud = DEFAULT_BAUD;
|
||||
char *e;
|
||||
|
||||
outb(0x3, early_serial_base + LCR); /* 8n1 */
|
||||
outb(0, early_serial_base + IER); /* no interrupt */
|
||||
outb(0, early_serial_base + FCR); /* no fifo */
|
||||
outb(0x3, early_serial_base + MCR); /* DTR + RTS */
|
||||
|
||||
baud = DEFAULT_BAUD;
|
||||
|
||||
divisor = 115200 / baud;
|
||||
c = inb(early_serial_base + LCR);
|
||||
outb(c | DLAB, early_serial_base + LCR);
|
||||
outb(divisor & 0xff, early_serial_base + DLL);
|
||||
outb((divisor >> 8) & 0xff, early_serial_base + DLH);
|
||||
outb(c & ~DLAB, early_serial_base + LCR);
|
||||
}
|
||||
|
||||
/*
|
||||
* Do the lzma decompression
|
||||
* When using LZMA in callback, the end of input stream is automatically determined
|
||||
*/
|
||||
static int lzma_unzip(void)
|
||||
{
|
||||
|
||||
unsigned int i; /* temp value */
|
||||
unsigned int lc; /* literal context bits */
|
||||
unsigned int lp; /* literal pos state bits */
|
||||
unsigned int pb; /* pos state bits */
|
||||
unsigned int uncompressedSize = 0;
|
||||
unsigned char* p;
|
||||
|
||||
ILzmaInCallback callback;
|
||||
callback.Read = read_byte;
|
||||
|
||||
/* lzma args */
|
||||
i = get_byte();
|
||||
lc = i % 9, i = i / 9;
|
||||
lp = i % 5, pb = i / 5;
|
||||
|
||||
/* skip dictionary size */
|
||||
for (i = 0; i < 4; i++)
|
||||
get_byte();
|
||||
// get uncompressedSize
|
||||
p= (char*)&uncompressedSize;
|
||||
for (i = 0; i < 4; i++)
|
||||
*p++ = get_byte();
|
||||
|
||||
//get compressedSize
|
||||
for (i = 0; i < 4; i++)
|
||||
get_byte();
|
||||
|
||||
// point it beyond uncompresedSize
|
||||
//workspace = window + uncompressedSize;
|
||||
|
||||
/* decompress kernel */
|
||||
if (LzmaDecode((unsigned char*)workspace, ~0, lc, lp, pb, &callback,
|
||||
(unsigned char*)window, uncompressedSize, &i) == LZMA_RESULT_OK)
|
||||
return 0;
|
||||
else
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
||||
#ifdef _LZMA_IN_CB
|
||||
static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
|
||||
{
|
||||
static unsigned int i = 0;
|
||||
static unsigned char val;
|
||||
*bufferSize = 1;
|
||||
val = get_byte();
|
||||
*buffer = &val;
|
||||
return LZMA_RESULT_OK;
|
||||
}
|
||||
#endif
|
||||
|
||||
static void error(char *x)
|
||||
{
|
||||
while(1); /* Halt */
|
||||
}
|
||||
|
||||
asmlinkage void decompress_kernel(void *rmode, unsigned long end,
|
||||
uch *input_data, unsigned long input_len, uch *output)
|
||||
{
|
||||
real_mode = rmode;
|
||||
|
||||
window = output;
|
||||
inbuf = input_data; /* Input buffer */
|
||||
insize = input_len;
|
||||
inptr = 0;
|
||||
|
||||
if ((u32)output & (CONFIG_PHYSICAL_ALIGN -1))
|
||||
error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
|
||||
if ((workspace = end) > ((-__PAGE_OFFSET-(512 <<20)-1) & 0x7fffffff))
|
||||
error("Destination address too large");
|
||||
#ifndef CONFIG_RELOCATABLE
|
||||
if ((u32)output != LOAD_PHYSICAL_ADDR)
|
||||
error("Wrong destination address");
|
||||
#endif
|
||||
early_serial_init();
|
||||
early_serial_write("Uncompressing Linux\n", 512);
|
||||
lzma_unzip();
|
||||
early_serial_write("Done, booting\n", 512);
|
||||
return;
|
||||
}
|
@ -1,979 +1,3 @@
|
||||
--- /dev/null
|
||||
+++ b/arch/x86/boot/compressed/LzmaDecode.c
|
||||
@@ -0,0 +1,586 @@
|
||||
+/*
|
||||
+ LzmaDecode.c
|
||||
+ LZMA Decoder (optimized for Speed version)
|
||||
+
|
||||
+ LZMA SDK 4.17 Copyright (c) 1999-2005 Igor Pavlov (2005-04-05)
|
||||
+ http://www.7-zip.org/
|
||||
+
|
||||
+ LZMA SDK is licensed under two licenses:
|
||||
+ 1) GNU Lesser General Public License (GNU LGPL)
|
||||
+ 2) Common Public License (CPL)
|
||||
+ It means that you can select one of these two licenses and
|
||||
+ follow rules of that license.
|
||||
+
|
||||
+ SPECIAL EXCEPTION:
|
||||
+ Igor Pavlov, as the author of this Code, expressly permits you to
|
||||
+ statically or dynamically link your Code (or bind by name) to the
|
||||
+ interfaces of this file without subjecting your linked Code to the
|
||||
+ terms of the CPL or GNU LGPL. Any modifications or additions
|
||||
+ to this file, however, are subject to the LGPL or CPL terms.
|
||||
+*/
|
||||
+
|
||||
+#include "LzmaDecode.h"
|
||||
+
|
||||
+#ifndef Byte
|
||||
+#define Byte unsigned char
|
||||
+#endif
|
||||
+
|
||||
+#define kNumTopBits 24
|
||||
+#define kTopValue ((UInt32)1 << kNumTopBits)
|
||||
+
|
||||
+#define kNumBitModelTotalBits 11
|
||||
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
|
||||
+#define kNumMoveBits 5
|
||||
+
|
||||
+#define RC_READ_BYTE (*Buffer++)
|
||||
+
|
||||
+#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
|
||||
+ { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
|
||||
+
|
||||
+#ifdef _LZMA_IN_CB
|
||||
+
|
||||
+#define RC_TEST { if (Buffer == BufferLim) \
|
||||
+ { UInt32 size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
|
||||
+ BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
|
||||
+
|
||||
+#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
|
||||
+
|
||||
+#else
|
||||
+
|
||||
+#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
|
||||
+
|
||||
+#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
|
||||
+
|
||||
+#endif
|
||||
+
|
||||
+#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
|
||||
+
|
||||
+#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
|
||||
+#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
|
||||
+#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
|
||||
+
|
||||
+#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
|
||||
+ { UpdateBit0(p); mi <<= 1; A0; } else \
|
||||
+ { UpdateBit1(p); mi = (mi + mi) + 1; A1; }
|
||||
+
|
||||
+#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)
|
||||
+
|
||||
+#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
|
||||
+ { int i = numLevels; res = 1; \
|
||||
+ do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
|
||||
+ res -= (1 << numLevels); }
|
||||
+
|
||||
+
|
||||
+#define kNumPosBitsMax 4
|
||||
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
|
||||
+
|
||||
+#define kLenNumLowBits 3
|
||||
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
|
||||
+#define kLenNumMidBits 3
|
||||
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
|
||||
+#define kLenNumHighBits 8
|
||||
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
|
||||
+
|
||||
+#define LenChoice 0
|
||||
+#define LenChoice2 (LenChoice + 1)
|
||||
+#define LenLow (LenChoice2 + 1)
|
||||
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
|
||||
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
|
||||
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
|
||||
+
|
||||
+
|
||||
+#define kNumStates 12
|
||||
+#define kNumLitStates 7
|
||||
+
|
||||
+#define kStartPosModelIndex 4
|
||||
+#define kEndPosModelIndex 14
|
||||
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
|
||||
+
|
||||
+#define kNumPosSlotBits 6
|
||||
+#define kNumLenToPosStates 4
|
||||
+
|
||||
+#define kNumAlignBits 4
|
||||
+#define kAlignTableSize (1 << kNumAlignBits)
|
||||
+
|
||||
+#define kMatchMinLen 2
|
||||
+
|
||||
+#define IsMatch 0
|
||||
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
|
||||
+#define IsRepG0 (IsRep + kNumStates)
|
||||
+#define IsRepG1 (IsRepG0 + kNumStates)
|
||||
+#define IsRepG2 (IsRepG1 + kNumStates)
|
||||
+#define IsRep0Long (IsRepG2 + kNumStates)
|
||||
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
|
||||
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
|
||||
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
|
||||
+#define LenCoder (Align + kAlignTableSize)
|
||||
+#define RepLenCoder (LenCoder + kNumLenProbs)
|
||||
+#define Literal (RepLenCoder + kNumLenProbs)
|
||||
+
|
||||
+#if Literal != LZMA_BASE_SIZE
|
||||
+StopCompilingDueBUG
|
||||
+#endif
|
||||
+
|
||||
+#ifdef _LZMA_OUT_READ
|
||||
+
|
||||
+typedef struct _LzmaVarState
|
||||
+{
|
||||
+ Byte *Buffer;
|
||||
+ Byte *BufferLim;
|
||||
+ UInt32 Range;
|
||||
+ UInt32 Code;
|
||||
+ #ifdef _LZMA_IN_CB
|
||||
+ ILzmaInCallback *InCallback;
|
||||
+ #endif
|
||||
+ Byte *Dictionary;
|
||||
+ UInt32 DictionarySize;
|
||||
+ UInt32 DictionaryPos;
|
||||
+ UInt32 GlobalPos;
|
||||
+ UInt32 Reps[4];
|
||||
+ int lc;
|
||||
+ int lp;
|
||||
+ int pb;
|
||||
+ int State;
|
||||
+ int RemainLen;
|
||||
+ Byte TempDictionary[4];
|
||||
+} LzmaVarState;
|
||||
+
|
||||
+int LzmaDecoderInit(
|
||||
+ unsigned char *buffer, UInt32 bufferSize,
|
||||
+ int lc, int lp, int pb,
|
||||
+ unsigned char *dictionary, UInt32 dictionarySize,
|
||||
+ #ifdef _LZMA_IN_CB
|
||||
+ ILzmaInCallback *InCallback
|
||||
+ #else
|
||||
+ unsigned char *inStream, UInt32 inSize
|
||||
+ #endif
|
||||
+ )
|
||||
+{
|
||||
+ Byte *Buffer;
|
||||
+ Byte *BufferLim;
|
||||
+ UInt32 Range;
|
||||
+ UInt32 Code;
|
||||
+ LzmaVarState *vs = (LzmaVarState *)buffer;
|
||||
+ CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
|
||||
+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
|
||||
+ UInt32 i;
|
||||
+ if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
|
||||
+ return LZMA_RESULT_NOT_ENOUGH_MEM;
|
||||
+ vs->Dictionary = dictionary;
|
||||
+ vs->DictionarySize = dictionarySize;
|
||||
+ vs->DictionaryPos = 0;
|
||||
+ vs->GlobalPos = 0;
|
||||
+ vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
|
||||
+ vs->lc = lc;
|
||||
+ vs->lp = lp;
|
||||
+ vs->pb = pb;
|
||||
+ vs->State = 0;
|
||||
+ vs->RemainLen = 0;
|
||||
+ dictionary[dictionarySize - 1] = 0;
|
||||
+ for (i = 0; i < numProbs; i++)
|
||||
+ p[i] = kBitModelTotal >> 1;
|
||||
+
|
||||
+ #ifdef _LZMA_IN_CB
|
||||
+ RC_INIT;
|
||||
+ #else
|
||||
+ RC_INIT(inStream, inSize);
|
||||
+ #endif
|
||||
+ vs->Buffer = Buffer;
|
||||
+ vs->BufferLim = BufferLim;
|
||||
+ vs->Range = Range;
|
||||
+ vs->Code = Code;
|
||||
+ #ifdef _LZMA_IN_CB
|
||||
+ vs->InCallback = InCallback;
|
||||
+ #endif
|
||||
+
|
||||
+ return LZMA_RESULT_OK;
|
||||
+}
|
||||
+
|
||||
+int LzmaDecode(unsigned char *buffer,
|
||||
+ unsigned char *outStream, UInt32 outSize,
|
||||
+ UInt32 *outSizeProcessed)
|
||||
+{
|
||||
+ LzmaVarState *vs = (LzmaVarState *)buffer;
|
||||
+ Byte *Buffer = vs->Buffer;
|
||||
+ Byte *BufferLim = vs->BufferLim;
|
||||
+ UInt32 Range = vs->Range;
|
||||
+ UInt32 Code = vs->Code;
|
||||
+ #ifdef _LZMA_IN_CB
|
||||
+ ILzmaInCallback *InCallback = vs->InCallback;
|
||||
+ #endif
|
||||
+ CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
|
||||
+ int state = vs->State;
|
||||
+ Byte previousByte;
|
||||
+ UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
|
||||
+ UInt32 nowPos = 0;
|
||||
+ UInt32 posStateMask = (1 << (vs->pb)) - 1;
|
||||
+ UInt32 literalPosMask = (1 << (vs->lp)) - 1;
|
||||
+ int lc = vs->lc;
|
||||
+ int len = vs->RemainLen;
|
||||
+ UInt32 globalPos = vs->GlobalPos;
|
||||
+
|
||||
+ Byte *dictionary = vs->Dictionary;
|
||||
+ UInt32 dictionarySize = vs->DictionarySize;
|
||||
+ UInt32 dictionaryPos = vs->DictionaryPos;
|
||||
+
|
||||
+ Byte tempDictionary[4];
|
||||
+ if (dictionarySize == 0)
|
||||
+ {
|
||||
+ dictionary = tempDictionary;
|
||||
+ dictionarySize = 1;
|
||||
+ tempDictionary[0] = vs->TempDictionary[0];
|
||||
+ }
|
||||
+
|
||||
+ if (len == -1)
|
||||
+ {
|
||||
+ *outSizeProcessed = 0;
|
||||
+ return LZMA_RESULT_OK;
|
||||
+ }
|
||||
+
|
||||
+ while(len != 0 && nowPos < outSize)
|
||||
+ {
|
||||
+ UInt32 pos = dictionaryPos - rep0;
|
||||
+ if (pos >= dictionarySize)
|
||||
+ pos += dictionarySize;
|
||||
+ outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
|
||||
+ if (++dictionaryPos == dictionarySize)
|
||||
+ dictionaryPos = 0;
|
||||
+ len--;
|
||||
+ }
|
||||
+ if (dictionaryPos == 0)
|
||||
+ previousByte = dictionary[dictionarySize - 1];
|
||||
+ else
|
||||
+ previousByte = dictionary[dictionaryPos - 1];
|
||||
+#else
|
||||
+
|
||||
+int LzmaDecode(
|
||||
+ Byte *buffer, UInt32 bufferSize,
|
||||
+ int lc, int lp, int pb,
|
||||
+ #ifdef _LZMA_IN_CB
|
||||
+ ILzmaInCallback *InCallback,
|
||||
+ #else
|
||||
+ unsigned char *inStream, UInt32 inSize,
|
||||
+ #endif
|
||||
+ unsigned char *outStream, UInt32 outSize,
|
||||
+ UInt32 *outSizeProcessed)
|
||||
+{
|
||||
+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
|
||||
+ CProb *p = (CProb *)buffer;
|
||||
+
|
||||
+ UInt32 i;
|
||||
+ int state = 0;
|
||||
+ Byte previousByte = 0;
|
||||
+ UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
|
||||
+ UInt32 nowPos = 0;
|
||||
+ UInt32 posStateMask = (1 << pb) - 1;
|
||||
+ UInt32 literalPosMask = (1 << lp) - 1;
|
||||
+ int len = 0;
|
||||
+
|
||||
+ Byte *Buffer;
|
||||
+ Byte *BufferLim;
|
||||
+ UInt32 Range;
|
||||
+ UInt32 Code;
|
||||
+
|
||||
+ if (bufferSize < numProbs * sizeof(CProb))
|
||||
+ return LZMA_RESULT_NOT_ENOUGH_MEM;
|
||||
+ for (i = 0; i < numProbs; i++)
|
||||
+ p[i] = kBitModelTotal >> 1;
|
||||
+
|
||||
+
|
||||
+ #ifdef _LZMA_IN_CB
|
||||
+ RC_INIT;
|
||||
+ #else
|
||||
+ RC_INIT(inStream, inSize);
|
||||
+ #endif
|
||||
+#endif
|
||||
+
|
||||
+ *outSizeProcessed = 0;
|
||||
+ while(nowPos < outSize)
|
||||
+ {
|
||||
+ CProb *prob;
|
||||
+ UInt32 bound;
|
||||
+ int posState = (int)(
|
||||
+ (nowPos
|
||||
+ #ifdef _LZMA_OUT_READ
|
||||
+ + globalPos
|
||||
+ #endif
|
||||
+ )
|
||||
+ & posStateMask);
|
||||
+
|
||||
+ prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
|
||||
+ IfBit0(prob)
|
||||
+ {
|
||||
+ int symbol = 1;
|
||||
+ UpdateBit0(prob)
|
||||
+ prob = p + Literal + (LZMA_LIT_SIZE *
|
||||
+ (((
|
||||
+ (nowPos
|
||||
+ #ifdef _LZMA_OUT_READ
|
||||
+ + globalPos
|
||||
+ #endif
|
||||
+ )
|
||||
+ & literalPosMask) << lc) + (previousByte >> (8 - lc))));
|
||||
+
|
||||
+ if (state >= kNumLitStates)
|
||||
+ {
|
||||
+ int matchByte;
|
||||
+ #ifdef _LZMA_OUT_READ
|
||||
+ UInt32 pos = dictionaryPos - rep0;
|
||||
+ if (pos >= dictionarySize)
|
||||
+ pos += dictionarySize;
|
||||
+ matchByte = dictionary[pos];
|
||||
+ #else
|
||||
+ matchByte = outStream[nowPos - rep0];
|
||||
+ #endif
|
||||
+ do
|
||||
+ {
|
||||
+ int bit;
|
||||
+ CProb *probLit;
|
||||
+ matchByte <<= 1;
|
||||
+ bit = (matchByte & 0x100);
|
||||
+ probLit = prob + 0x100 + bit + symbol;
|
||||
+ RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
|
||||
+ }
|
||||
+ while (symbol < 0x100);
|
||||
+ }
|
||||
+ while (symbol < 0x100)
|
||||
+ {
|
||||
+ CProb *probLit = prob + symbol;
|
||||
+ RC_GET_BIT(probLit, symbol)
|
||||
+ }
|
||||
+ previousByte = (Byte)symbol;
|
||||
+
|
||||
+ outStream[nowPos++] = previousByte;
|
||||
+ #ifdef _LZMA_OUT_READ
|
||||
+ dictionary[dictionaryPos] = previousByte;
|
||||
+ if (++dictionaryPos == dictionarySize)
|
||||
+ dictionaryPos = 0;
|
||||
+ #endif
|
||||
+ if (state < 4) state = 0;
|
||||
+ else if (state < 10) state -= 3;
|
||||
+ else state -= 6;
|
||||
+ }
|
||||
+ else
|
||||
+ {
|
||||
+ UpdateBit1(prob);
|
||||
+ prob = p + IsRep + state;
|
||||
+ IfBit0(prob)
|
||||
+ {
|
||||
+ UpdateBit0(prob);
|
||||
+ rep3 = rep2;
|
||||
+ rep2 = rep1;
|
||||
+ rep1 = rep0;
|
||||
+ state = state < kNumLitStates ? 0 : 3;
|
||||
+ prob = p + LenCoder;
|
||||
+ }
|
||||
+ else
|
||||
+ {
|
||||
+ UpdateBit1(prob);
|
||||
+ prob = p + IsRepG0 + state;
|
||||
+ IfBit0(prob)
|
||||
+ {
|
||||
+ UpdateBit0(prob);
|
||||
+ prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
|
||||
+ IfBit0(prob)
|
||||
+ {
|
||||
+ #ifdef _LZMA_OUT_READ
|
||||
+ UInt32 pos;
|
||||
+ #endif
|
||||
+ UpdateBit0(prob);
|
||||
+ if (nowPos
|
||||
+ #ifdef _LZMA_OUT_READ
|
||||
+ + globalPos
|
||||
+ #endif
|
||||
+ == 0)
|
||||
+ return LZMA_RESULT_DATA_ERROR;
|
||||
+ state = state < kNumLitStates ? 9 : 11;
|
||||
+ #ifdef _LZMA_OUT_READ
|
||||
+ pos = dictionaryPos - rep0;
|
||||
+ if (pos >= dictionarySize)
|
||||
+ pos += dictionarySize;
|
||||
+ previousByte = dictionary[pos];
|
||||
+ dictionary[dictionaryPos] = previousByte;
|
||||
+ if (++dictionaryPos == dictionarySize)
|
||||
+ dictionaryPos = 0;
|
||||
+ #else
|
||||
+ previousByte = outStream[nowPos - rep0];
|
||||
+ #endif
|
||||
+ outStream[nowPos++] = previousByte;
|
||||
+ continue;
|
||||
+ }
|
||||
+ else
|
||||
+ {
|
||||
+ UpdateBit1(prob);
|
||||
+ }
|
||||
+ }
|
||||
+ else
|
||||
+ {
|
||||
+ UInt32 distance;
|
||||
+ UpdateBit1(prob);
|
||||
+ prob = p + IsRepG1 + state;
|
||||
+ IfBit0(prob)
|
||||
+ {
|
||||
+ UpdateBit0(prob);
|
||||
+ distance = rep1;
|
||||
+ }
|
||||
+ else
|
||||
+ {
|
||||
+ UpdateBit1(prob);
|
||||
+ prob = p + IsRepG2 + state;
|
||||
+ IfBit0(prob)
|
||||
+ {
|
||||
+ UpdateBit0(prob);
|
||||
+ distance = rep2;
|
||||
+ }
|
||||
+ else
|
||||
+ {
|
||||
+ UpdateBit1(prob);
|
||||
+ distance = rep3;
|
||||
+ rep3 = rep2;
|
||||
+ }
|
||||
+ rep2 = rep1;
|
||||
+ }
|
||||
+ rep1 = rep0;
|
||||
+ rep0 = distance;
|
||||
+ }
|
||||
+ state = state < kNumLitStates ? 8 : 11;
|
||||
+ prob = p + RepLenCoder;
|
||||
+ }
|
||||
+ {
|
||||
+ int numBits, offset;
|
||||
+ CProb *probLen = prob + LenChoice;
|
||||
+ IfBit0(probLen)
|
||||
+ {
|
||||
+ UpdateBit0(probLen);
|
||||
+ probLen = prob + LenLow + (posState << kLenNumLowBits);
|
||||
+ offset = 0;
|
||||
+ numBits = kLenNumLowBits;
|
||||
+ }
|
||||
+ else
|
||||
+ {
|
||||
+ UpdateBit1(probLen);
|
||||
+ probLen = prob + LenChoice2;
|
||||
+ IfBit0(probLen)
|
||||
+ {
|
||||
+ UpdateBit0(probLen);
|
||||
+ probLen = prob + LenMid + (posState << kLenNumMidBits);
|
||||
+ offset = kLenNumLowSymbols;
|
||||
+ numBits = kLenNumMidBits;
|
||||
+ }
|
||||
+ else
|
||||
+ {
|
||||
+ UpdateBit1(probLen);
|
||||
+ probLen = prob + LenHigh;
|
||||
+ offset = kLenNumLowSymbols + kLenNumMidSymbols;
|
||||
+ numBits = kLenNumHighBits;
|
||||
+ }
|
||||
+ }
|
||||
+ RangeDecoderBitTreeDecode(probLen, numBits, len);
|
||||
+ len += offset;
|
||||
+ }
|
||||
+
|
||||
+ if (state < 4)
|
||||
+ {
|
||||
+ int posSlot;
|
||||
+ state += kNumLitStates;
|
||||
+ prob = p + PosSlot +
|
||||
+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
|
||||
+ kNumPosSlotBits);
|
||||
+ RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
|
||||
+ if (posSlot >= kStartPosModelIndex)
|
||||
+ {
|
||||
+ int numDirectBits = ((posSlot >> 1) - 1);
|
||||
+ rep0 = (2 | ((UInt32)posSlot & 1));
|
||||
+ if (posSlot < kEndPosModelIndex)
|
||||
+ {
|
||||
+ rep0 <<= numDirectBits;
|
||||
+ prob = p + SpecPos + rep0 - posSlot - 1;
|
||||
+ }
|
||||
+ else
|
||||
+ {
|
||||
+ numDirectBits -= kNumAlignBits;
|
||||
+ do
|
||||
+ {
|
||||
+ RC_NORMALIZE
|
||||
+ Range >>= 1;
|
||||
+ rep0 <<= 1;
|
||||
+ if (Code >= Range)
|
||||
+ {
|
||||
+ Code -= Range;
|
||||
+ rep0 |= 1;
|
||||
+ }
|
||||
+ }
|
||||
+ while (--numDirectBits != 0);
|
||||
+ prob = p + Align;
|
||||
+ rep0 <<= kNumAlignBits;
|
||||
+ numDirectBits = kNumAlignBits;
|
||||
+ }
|
||||
+ {
|
||||
+ int i = 1;
|
||||
+ int mi = 1;
|
||||
+ do
|
||||
+ {
|
||||
+ CProb *prob3 = prob + mi;
|
||||
+ RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
|
||||
+ i <<= 1;
|
||||
+ }
|
||||
+ while(--numDirectBits != 0);
|
||||
+ }
|
||||
+ }
|
||||
+ else
|
||||
+ rep0 = posSlot;
|
||||
+ if (++rep0 == (UInt32)(0))
|
||||
+ {
|
||||
+ /* it's for stream version */
|
||||
+ len = -1;
|
||||
+ break;
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ len += kMatchMinLen;
|
||||
+ if (rep0 > nowPos
|
||||
+ #ifdef _LZMA_OUT_READ
|
||||
+ + globalPos || rep0 > dictionarySize
|
||||
+ #endif
|
||||
+ )
|
||||
+ return LZMA_RESULT_DATA_ERROR;
|
||||
+ do
|
||||
+ {
|
||||
+ #ifdef _LZMA_OUT_READ
|
||||
+ UInt32 pos = dictionaryPos - rep0;
|
||||
+ if (pos >= dictionarySize)
|
||||
+ pos += dictionarySize;
|
||||
+ previousByte = dictionary[pos];
|
||||
+ dictionary[dictionaryPos] = previousByte;
|
||||
+ if (++dictionaryPos == dictionarySize)
|
||||
+ dictionaryPos = 0;
|
||||
+ #else
|
||||
+ previousByte = outStream[nowPos - rep0];
|
||||
+ #endif
|
||||
+ len--;
|
||||
+ outStream[nowPos++] = previousByte;
|
||||
+ }
|
||||
+ while(len != 0 && nowPos < outSize);
|
||||
+ }
|
||||
+ }
|
||||
+ RC_NORMALIZE;
|
||||
+
|
||||
+ #ifdef _LZMA_OUT_READ
|
||||
+ vs->Buffer = Buffer;
|
||||
+ vs->BufferLim = BufferLim;
|
||||
+ vs->Range = Range;
|
||||
+ vs->Code = Code;
|
||||
+ vs->DictionaryPos = dictionaryPos;
|
||||
+ vs->GlobalPos = globalPos + nowPos;
|
||||
+ vs->Reps[0] = rep0;
|
||||
+ vs->Reps[1] = rep1;
|
||||
+ vs->Reps[2] = rep2;
|
||||
+ vs->Reps[3] = rep3;
|
||||
+ vs->State = state;
|
||||
+ vs->RemainLen = len;
|
||||
+ vs->TempDictionary[0] = tempDictionary[0];
|
||||
+ #endif
|
||||
+
|
||||
+ *outSizeProcessed = nowPos;
|
||||
+ return LZMA_RESULT_OK;
|
||||
+}
|
||||
--- /dev/null
|
||||
+++ b/arch/x86/boot/compressed/LzmaDecode.h
|
||||
@@ -0,0 +1,100 @@
|
||||
+/*
|
||||
+ LzmaDecode.h
|
||||
+ LZMA Decoder interface
|
||||
+
|
||||
+ LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18)
|
||||
+ http://www.7-zip.org/
|
||||
+
|
||||
+ LZMA SDK is licensed under two licenses:
|
||||
+ 1) GNU Lesser General Public License (GNU LGPL)
|
||||
+ 2) Common Public License (CPL)
|
||||
+ It means that you can select one of these two licenses and
|
||||
+ follow rules of that license.
|
||||
+
|
||||
+ SPECIAL EXCEPTION:
|
||||
+ Igor Pavlov, as the author of this code, expressly permits you to
|
||||
+ statically or dynamically link your code (or bind by name) to the
|
||||
+ interfaces of this file without subjecting your linked code to the
|
||||
+ terms of the CPL or GNU LGPL. Any modifications or additions
|
||||
+ to this file, however, are subject to the LGPL or CPL terms.
|
||||
+*/
|
||||
+
|
||||
+#ifndef __LZMADECODE_H
|
||||
+#define __LZMADECODE_H
|
||||
+
|
||||
+/* #define _LZMA_IN_CB */
|
||||
+/* Use callback for input data */
|
||||
+
|
||||
+/* #define _LZMA_OUT_READ */
|
||||
+/* Use read function for output data */
|
||||
+
|
||||
+/* #define _LZMA_PROB32 */
|
||||
+/* It can increase speed on some 32-bit CPUs,
|
||||
+ but memory usage will be doubled in that case */
|
||||
+
|
||||
+/* #define _LZMA_LOC_OPT */
|
||||
+/* Enable local speed optimizations inside code */
|
||||
+
|
||||
+#ifndef UInt32
|
||||
+#ifdef _LZMA_UINT32_IS_ULONG
|
||||
+#define UInt32 unsigned long
|
||||
+#else
|
||||
+#define UInt32 unsigned int
|
||||
+#endif
|
||||
+#endif
|
||||
+
|
||||
+#ifdef _LZMA_PROB32
|
||||
+#define CProb UInt32
|
||||
+#else
|
||||
+#define CProb unsigned short
|
||||
+#endif
|
||||
+
|
||||
+#define LZMA_RESULT_OK 0
|
||||
+#define LZMA_RESULT_DATA_ERROR 1
|
||||
+#define LZMA_RESULT_NOT_ENOUGH_MEM 2
|
||||
+
|
||||
+#ifdef _LZMA_IN_CB
|
||||
+typedef struct _ILzmaInCallback
|
||||
+{
|
||||
+ int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
|
||||
+} ILzmaInCallback;
|
||||
+#endif
|
||||
+
|
||||
+#define LZMA_BASE_SIZE 1846
|
||||
+#define LZMA_LIT_SIZE 768
|
||||
+
|
||||
+/*
|
||||
+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
|
||||
+bufferSize += 100 in case of _LZMA_OUT_READ
|
||||
+by default CProb is unsigned short,
|
||||
+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
|
||||
+*/
|
||||
+
|
||||
+#ifdef _LZMA_OUT_READ
|
||||
+int LzmaDecoderInit(
|
||||
+ unsigned char *buffer, UInt32 bufferSize,
|
||||
+ int lc, int lp, int pb,
|
||||
+ unsigned char *dictionary, UInt32 dictionarySize,
|
||||
+ #ifdef _LZMA_IN_CB
|
||||
+ ILzmaInCallback *inCallback
|
||||
+ #else
|
||||
+ unsigned char *inStream, UInt32 inSize
|
||||
+ #endif
|
||||
+);
|
||||
+#endif
|
||||
+
|
||||
+int LzmaDecode(
|
||||
+ unsigned char *buffer,
|
||||
+ #ifndef _LZMA_OUT_READ
|
||||
+ UInt32 bufferSize,
|
||||
+ int lc, int lp, int pb,
|
||||
+ #ifdef _LZMA_IN_CB
|
||||
+ ILzmaInCallback *inCallback,
|
||||
+ #else
|
||||
+ unsigned char *inStream, UInt32 inSize,
|
||||
+ #endif
|
||||
+ #endif
|
||||
+ unsigned char *outStream, UInt32 outSize,
|
||||
+ UInt32 *outSizeProcessed);
|
||||
+
|
||||
+#endif
|
||||
--- /dev/null
|
||||
+++ b/arch/x86/boot/compressed/lzma_misc.c
|
||||
@@ -0,0 +1,281 @@
|
||||
+/*
|
||||
+ * lzma_misc.c
|
||||
+ *
|
||||
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
|
||||
+ * puts by Nick Holloway 1993, better puts by Martin Mares 1995
|
||||
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
|
||||
+ *
|
||||
+ * Decompress LZMA compressed vmlinuz
|
||||
+ * Version 0.9 Copyright (c) Ming-Ching Tiew mctiew@yahoo.com
|
||||
+ * Program adapted from misc.c for 2.6 kernel
|
||||
+ * Forward ported to latest 2.6 version of misc.c by
|
||||
+ * Felix Fietkau <nbd@openwrt.org>
|
||||
+ */
|
||||
+
|
||||
+#undef CONFIG_PARAVIRT
|
||||
+#include <linux/linkage.h>
|
||||
+#include <linux/vmalloc.h>
|
||||
+#include <linux/screen_info.h>
|
||||
+#include <asm/io.h>
|
||||
+#include <asm/page.h>
|
||||
+#include <asm/boot.h>
|
||||
+
|
||||
+/* WARNING!!
|
||||
+ * This code is compiled with -fPIC and it is relocated dynamically
|
||||
+ * at run time, but no relocation processing is performed.
|
||||
+ * This means that it is not safe to place pointers in static structures.
|
||||
+ */
|
||||
+
|
||||
+/*
|
||||
+ * Getting to provable safe in place decompression is hard.
|
||||
+ * Worst case behaviours need to be analized.
|
||||
+ * Background information:
|
||||
+ *
|
||||
+ * The file layout is:
|
||||
+ * magic[2]
|
||||
+ * method[1]
|
||||
+ * flags[1]
|
||||
+ * timestamp[4]
|
||||
+ * extraflags[1]
|
||||
+ * os[1]
|
||||
+ * compressed data blocks[N]
|
||||
+ * crc[4] orig_len[4]
|
||||
+ *
|
||||
+ * resulting in 18 bytes of non compressed data overhead.
|
||||
+ *
|
||||
+ * Files divided into blocks
|
||||
+ * 1 bit (last block flag)
|
||||
+ * 2 bits (block type)
|
||||
+ *
|
||||
+ * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
|
||||
+ * The smallest block type encoding is always used.
|
||||
+ *
|
||||
+ * stored:
|
||||
+ * 32 bits length in bytes.
|
||||
+ *
|
||||
+ * fixed:
|
||||
+ * magic fixed tree.
|
||||
+ * symbols.
|
||||
+ *
|
||||
+ * dynamic:
|
||||
+ * dynamic tree encoding.
|
||||
+ * symbols.
|
||||
+ *
|
||||
+ *
|
||||
+ * The buffer for decompression in place is the length of the
|
||||
+ * uncompressed data, plus a small amount extra to keep the algorithm safe.
|
||||
+ * The compressed data is placed at the end of the buffer. The output
|
||||
+ * pointer is placed at the start of the buffer and the input pointer
|
||||
+ * is placed where the compressed data starts. Problems will occur
|
||||
+ * when the output pointer overruns the input pointer.
|
||||
+ *
|
||||
+ * The output pointer can only overrun the input pointer if the input
|
||||
+ * pointer is moving faster than the output pointer. A condition only
|
||||
+ * triggered by data whose compressed form is larger than the uncompressed
|
||||
+ * form.
|
||||
+ *
|
||||
+ * The worst case at the block level is a growth of the compressed data
|
||||
+ * of 5 bytes per 32767 bytes.
|
||||
+ *
|
||||
+ * The worst case internal to a compressed block is very hard to figure.
|
||||
+ * The worst case can at least be boundined by having one bit that represents
|
||||
+ * 32764 bytes and then all of the rest of the bytes representing the very
|
||||
+ * very last byte.
|
||||
+ *
|
||||
+ * All of which is enough to compute an amount of extra data that is required
|
||||
+ * to be safe. To avoid problems at the block level allocating 5 extra bytes
|
||||
+ * per 32767 bytes of data is sufficient. To avoind problems internal to a block
|
||||
+ * adding an extra 32767 bytes (the worst case uncompressed block size) is
|
||||
+ * sufficient, to ensure that in the worst case the decompressed data for
|
||||
+ * block will stop the byte before the compressed data for a block begins.
|
||||
+ * To avoid problems with the compressed data's meta information an extra 18
|
||||
+ * bytes are needed. Leading to the formula:
|
||||
+ *
|
||||
+ * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
|
||||
+ *
|
||||
+ * Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
|
||||
+ * Adding 32768 instead of 32767 just makes for round numbers.
|
||||
+ * Adding the decompressor_size is necessary as it musht live after all
|
||||
+ * of the data as well. Last I measured the decompressor is about 14K.
|
||||
+ * 10K of actuall data and 4K of bss.
|
||||
+ *
|
||||
+ */
|
||||
+
|
||||
+/*
|
||||
+ * gzip declarations
|
||||
+ */
|
||||
+
|
||||
+#define OF(args) args
|
||||
+#define STATIC static
|
||||
+
|
||||
+#undef memcpy
|
||||
+
|
||||
+typedef unsigned char uch;
|
||||
+typedef unsigned short ush;
|
||||
+typedef unsigned long ulg;
|
||||
+
|
||||
+#define WSIZE 0x80000000 /* Window size must be at least 32k,
|
||||
+ * and a power of two
|
||||
+ * We don't actually have a window just
|
||||
+ * a huge output buffer so I report
|
||||
+ * a 2G windows size, as that should
|
||||
+ * always be larger than our output buffer.
|
||||
+ */
|
||||
+
|
||||
+static uch *inbuf; /* input buffer */
|
||||
+static uch *window; /* Sliding window buffer, (and final output buffer) */
|
||||
+
|
||||
+static unsigned insize; /* valid bytes in inbuf */
|
||||
+static unsigned inptr; /* index of next byte to be processed in inbuf */
|
||||
+static unsigned long workspace;
|
||||
+
|
||||
+#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
|
||||
+
|
||||
+/* Diagnostic functions */
|
||||
+#ifdef DEBUG
|
||||
+# define Assert(cond,msg) {if(!(cond)) error(msg);}
|
||||
+# define Trace(x) fprintf x
|
||||
+# define Tracev(x) {if (verbose) fprintf x ;}
|
||||
+# define Tracevv(x) {if (verbose>1) fprintf x ;}
|
||||
+# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
|
||||
+# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
|
||||
+#else
|
||||
+# define Assert(cond,msg)
|
||||
+# define Trace(x)
|
||||
+# define Tracev(x)
|
||||
+# define Tracevv(x)
|
||||
+# define Tracec(c,x)
|
||||
+# define Tracecv(c,x)
|
||||
+#endif
|
||||
+
|
||||
+static int fill_inbuf(void);
|
||||
+
|
||||
+/*
|
||||
+ * This is set up by the setup-routine at boot-time
|
||||
+ */
|
||||
+static unsigned char *real_mode; /* Pointer to real-mode data */
|
||||
+extern unsigned char input_data[];
|
||||
+extern int input_len;
|
||||
+
|
||||
+static void error(char *x);
|
||||
+static void *memcpy(void *dest, const void *src, unsigned n);
|
||||
+
|
||||
+#ifdef CONFIG_X86_NUMAQ
|
||||
+void *xquad_portio;
|
||||
+#endif
|
||||
+
|
||||
+static void* memcpy(void* dest, const void* src, unsigned n)
|
||||
+{
|
||||
+ int i;
|
||||
+ char *d = (char *)dest, *s = (char *)src;
|
||||
+
|
||||
+ for (i=0;i<n;i++) d[i] = s[i];
|
||||
+ return dest;
|
||||
+}
|
||||
+
|
||||
+/* ===========================================================================
|
||||
+ * Fill the input buffer. This is called only when the buffer is empty
|
||||
+ * and at least one byte is really needed.
|
||||
+ */
|
||||
+static int fill_inbuf(void)
|
||||
+{
|
||||
+ error("ran out of input data");
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+
|
||||
+// When using LZMA in callback, the compressed length is not needed.
|
||||
+// Otherwise you need a special version of lzma compression program
|
||||
+// which will pad the compressed length in the header.
|
||||
+#define _LZMA_IN_CB
|
||||
+#include "LzmaDecode.h"
|
||||
+#include "LzmaDecode.c"
|
||||
+
|
||||
+static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize);
|
||||
+
|
||||
+
|
||||
+/*
|
||||
+ * Do the lzma decompression
|
||||
+ * When using LZMA in callback, the end of input stream is automatically determined
|
||||
+ */
|
||||
+static int lzma_unzip(void)
|
||||
+{
|
||||
+
|
||||
+ unsigned int i; /* temp value */
|
||||
+ unsigned int lc; /* literal context bits */
|
||||
+ unsigned int lp; /* literal pos state bits */
|
||||
+ unsigned int pb; /* pos state bits */
|
||||
+ unsigned int uncompressedSize = 0;
|
||||
+ unsigned char* p;
|
||||
+
|
||||
+ ILzmaInCallback callback;
|
||||
+ callback.Read = read_byte;
|
||||
+
|
||||
+ /* lzma args */
|
||||
+ i = get_byte();
|
||||
+ lc = i % 9, i = i / 9;
|
||||
+ lp = i % 5, pb = i / 5;
|
||||
+
|
||||
+ /* skip dictionary size */
|
||||
+ for (i = 0; i < 4; i++)
|
||||
+ get_byte();
|
||||
+ // get uncompressedSize
|
||||
+ p= (char*)&uncompressedSize;
|
||||
+ for (i = 0; i < 4; i++)
|
||||
+ *p++ = get_byte();
|
||||
+
|
||||
+ //get compressedSize
|
||||
+ for (i = 0; i < 4; i++)
|
||||
+ get_byte();
|
||||
+
|
||||
+ // point it beyond uncompresedSize
|
||||
+ //workspace = window + uncompressedSize;
|
||||
+
|
||||
+ /* decompress kernel */
|
||||
+ if (LzmaDecode((unsigned char*)workspace, ~0, lc, lp, pb, &callback,
|
||||
+ (unsigned char*)window, uncompressedSize, &i) == LZMA_RESULT_OK)
|
||||
+ return 0;
|
||||
+ else
|
||||
+ return 1;
|
||||
+}
|
||||
+
|
||||
+
|
||||
+#ifdef _LZMA_IN_CB
|
||||
+static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
|
||||
+{
|
||||
+ static unsigned int i = 0;
|
||||
+ static unsigned char val;
|
||||
+ *bufferSize = 1;
|
||||
+ val = get_byte();
|
||||
+ *buffer = &val;
|
||||
+ return LZMA_RESULT_OK;
|
||||
+}
|
||||
+#endif
|
||||
+
|
||||
+static void error(char *x)
|
||||
+{
|
||||
+ while(1); /* Halt */
|
||||
+}
|
||||
+
|
||||
+asmlinkage void decompress_kernel(void *rmode, unsigned long end,
|
||||
+ uch *input_data, unsigned long input_len, uch *output)
|
||||
+{
|
||||
+ real_mode = rmode;
|
||||
+
|
||||
+ window = output;
|
||||
+ inbuf = input_data; /* Input buffer */
|
||||
+ insize = input_len;
|
||||
+ inptr = 0;
|
||||
+
|
||||
+ if ((u32)output & (CONFIG_PHYSICAL_ALIGN -1))
|
||||
+ error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
|
||||
+ if ((workspace = end) > ((-__PAGE_OFFSET-(512 <<20)-1) & 0x7fffffff))
|
||||
+ error("Destination address too large");
|
||||
+#ifndef CONFIG_RELOCATABLE
|
||||
+ if ((u32)output != LOAD_PHYSICAL_ADDR)
|
||||
+ error("Wrong destination address");
|
||||
+#endif
|
||||
+
|
||||
+ lzma_unzip();
|
||||
+ return;
|
||||
+}
|
||||
--- a/scripts/Makefile.lib
|
||||
+++ b/scripts/Makefile.lib
|
||||
@@ -172,4 +172,9 @@
|
||||
|
Loading…
Reference in New Issue
Block a user