jz4740: strip lots of now unused defines regs.h

target/linux/xburst/files-2.6.31/arch/mips/include/asm/mach-jz4740/clock.h

@@ -15,6 +15,8 @@
 #ifndef __ASM_JZ4740_CLOCK_H__
 #define __ASM_JZ4740_CLOCK_H__
 
+#include <asm/mach-jz4740/regs.h>
+
 #ifndef JZ_EXTAL
 //#define JZ_EXTAL		3686400   /* 3.6864 MHz */
 #define JZ_EXTAL		12000000   /* 3.6864 MHz */

target/linux/xburst/files-2.6.31/arch/mips/jz4740/dma.c

@@ -18,10 +18,9 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 
-#include <asm/mach-jz4740/regs.h>
 #include <linux/dma-mapping.h>
 #include <asm/mach-jz4740/dma.h>
-#include <linux/delay.h>
+#include <asm/mach-jz4740/regs.h>
 
 #define JZ_REG_DMA_SRC_ADDR(x)		(0x00 + (x) * 0x20)
 #define JZ_REG_DMA_DST_ADDR(x)		(0x04 + (x) * 0x20)

target/linux/xburst/files-2.6.31/arch/mips/jz4740/reset.c

@@ -18,6 +18,7 @@
 #include <asm/reboot.h>
 #include <asm/system.h>
 #include <asm/mach-jz4740/regs.h>
+#include <asm/mach-jz4740/timer.h>
 #include <asm/mach-jz4740/jz4740.h>
 
 void jz_restart(char *command)
@@ -26,7 +27,7 @@ void jz_restart(char *command)
 	REG_WDT_TCSR = WDT_TCSR_PRESCALE4 | WDT_TCSR_EXT_EN;
 	REG_WDT_TCNT = 0;
 	REG_WDT_TDR = JZ_EXTAL/1000;   /* reset after 4ms */
-	REG_TCU_TSCR = TCU_TSSR_WDTSC; /* enable wdt clock */
+	jz4740_timer_enable_watchdog();
 	REG_WDT_TCER = WDT_TCER_TCEN;  /* wdt start */
 	while (1);
 }

target/linux/xburst/files-2.6.31/arch/mips/jz4740/setup.c

@@ -23,7 +23,6 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/ioport.h>
 #include <linux/tty.h>
 #include <linux/serial.h>
@@ -57,6 +56,7 @@ static void __init soc_cpm_setup(void)
 	__cpm_idle_mode();
 }
 
+
 static void __init jz_serial_setup(void)
 {
 #ifdef CONFIG_SERIAL_8250

target/linux/xburst/files-2.6.31/drivers/usb/gadget/jz4740_udc.c

@@ -37,7 +37,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/mach-jz4740/regs.h>
 #include <asm/mach-jz4740/clock.h>
 
 #include "jz4740_udc.h"
@@ -76,6 +75,78 @@
 #define JZ_REG_UDC_ADDR2	0x218 /* DMA channel 2 AHB memory addr */
 #define JZ_REG_UDC_COUNT2	0x21c /* DMA channel 2 byte count */
 
+/* Power register bit masks */
+#define USB_POWER_SUSPENDM	0x01
+#define USB_POWER_RESUME	0x04
+#define USB_POWER_HSMODE	0x10
+#define USB_POWER_HSENAB	0x20
+#define USB_POWER_SOFTCONN	0x40
+
+/* Interrupt register bit masks */
+#define USB_INTR_SUSPEND	0x01
+#define USB_INTR_RESUME		0x02
+#define USB_INTR_RESET		0x04
+
+#define USB_INTR_EP0		0x0001
+#define USB_INTR_INEP1		0x0002
+#define USB_INTR_INEP2		0x0004
+#define USB_INTR_OUTEP1		0x0002
+
+/* CSR0 bit masks */
+#define USB_CSR0_OUTPKTRDY	0x01
+#define USB_CSR0_INPKTRDY	0x02
+#define USB_CSR0_SENTSTALL	0x04
+#define USB_CSR0_DATAEND	0x08
+#define USB_CSR0_SETUPEND	0x10
+#define USB_CSR0_SENDSTALL	0x20
+#define USB_CSR0_SVDOUTPKTRDY	0x40
+#define USB_CSR0_SVDSETUPEND	0x80
+
+/* Endpoint CSR register bits */
+#define USB_INCSRH_AUTOSET	0x80
+#define USB_INCSRH_ISO		0x40
+#define USB_INCSRH_MODE		0x20
+#define USB_INCSRH_DMAREQENAB	0x10
+#define USB_INCSRH_DMAREQMODE	0x04
+#define USB_INCSR_CDT		0x40
+#define USB_INCSR_SENTSTALL	0x20
+#define USB_INCSR_SENDSTALL	0x10
+#define USB_INCSR_FF		0x08
+#define USB_INCSR_UNDERRUN	0x04
+#define USB_INCSR_FFNOTEMPT	0x02
+#define USB_INCSR_INPKTRDY	0x01
+#define USB_OUTCSRH_AUTOCLR	0x80
+#define USB_OUTCSRH_ISO		0x40
+#define USB_OUTCSRH_DMAREQENAB	0x20
+#define USB_OUTCSRH_DNYT	0x10
+#define USB_OUTCSRH_DMAREQMODE	0x08
+#define USB_OUTCSR_CDT		0x80
+#define USB_OUTCSR_SENTSTALL	0x40
+#define USB_OUTCSR_SENDSTALL	0x20
+#define USB_OUTCSR_FF		0x10
+#define USB_OUTCSR_DATAERR	0x08
+#define USB_OUTCSR_OVERRUN	0x04
+#define USB_OUTCSR_FFFULL	0x02
+#define USB_OUTCSR_OUTPKTRDY	0x01
+
+/* Testmode register bits */
+#define USB_TEST_SE0NAK		0x01
+#define USB_TEST_J		0x02
+#define USB_TEST_K		0x04
+#define USB_TEST_PACKET		0x08
+
+/* DMA control bits */
+#define USB_CNTL_ENA		0x01
+#define USB_CNTL_DIR_IN		0x02
+#define USB_CNTL_MODE_1		0x04
+#define USB_CNTL_INTR_EN	0x08
+#define USB_CNTL_EP(n)		((n) << 4)
+#define USB_CNTL_BURST_0	(0 << 9)
+#define USB_CNTL_BURST_4	(1 << 9)
+#define USB_CNTL_BURST_8	(2 << 9)
+#define USB_CNTL_BURST_16	(3 << 9)
+
+
 #ifndef DEBUG
 # define DEBUG(fmt,args...) do {} while(0)
 #endif